Upgrade of jHeadstart 10.1.3.2.53 to newest release

We are planning a upgrade of jDeveloper/ADF 10.1.3.5.0.4306 to latest
version. In this process we need to upgrade jHeadstart as well.
We would appreciate some feedback to how much time such an upgrade will
require. As every project is different we would be happy to get some
general description of the upgrade process and estimated time for each
step.
A link to the releasenotes and installation guide would be appreciated
as well.
Best regards Ronny

Ronny,
I did an upgrade from JHS 10.1.3 to 11.1.1.4 about a year ago. Release notes are included with the JHS install and upgrade steps are included in the release notes.
Time commitment for the upgrade is going to depend on how extensively you've customized the JHS templates, or customized the application outside of JHS. Because of the changes in ADF Faces components between 10 and 11, JHS will regenerate your viewcontroller project from scratch (after upgrading your existing JHS definition) and then you have to re-apply any template customizations to the new templates.
One nice thing is that, in 11g, a lot of things that you used to have to do via customizations are now handled by JHS, or by the updated ADF components, so I was able to throw away many of the custom templates I had used in 10g.
So if your viewcontroller is pure JHS (no customizations) the upgrade is pretty clean.

Similar Messages

I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos?

I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos? I do nto care about anythign else.
Here are the steps I though I took this morning:
Backup iPad
Connect to iTunes and downlaod newest version of iTunes and then newest iOS
restart Vista Laptop
upgrade to newest iOS
I knew somethign was wrong when it took about 6 hours to upgrade the iPad
at the end it errored with this message error (-50), but the upgrade worked
I was expecting to see all my photos but didn't see them
I have tried a restore to a back up 2 times. The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
I tried it again 2 hours ago and same message.
They are very valuable to me and so now I am panicking
Your help is much appreciated

Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario

I have a power Mac G4 mirror front running 10.4.9. How current of an OS can I run on this machine? I want to put it back into use but need to upgrade the software so that I can run the newest version of Quickbooks amoung other things.

I have a power Mac G4 with a mirror front running 10.4.9. How current of an OS can I run on this machine? I want to put it back into use but need to upgrade the OS so that I can run the newest version of Quickbooks amoung other things.

I think you're out of luck...
System Requirements:
Minimum System Requirements
Mac with an Intel processor
Mac OS X v10.6
1 GB RAM
CD-ROM drive for installation
120 MB of available disk space
Printer: 100% Macintosh-compatible printer, if you plan to print invoices, checks, deposit slips, lists, purchase orders, mailing labels, reports, or graphs
Checks: Use Intuit Checks if you plan to print checks. Canadian Image Ready Cheques are not supported.
Integration/Compatibility Requirements
Export report data requires Numbers '09 (included with iWork from Apple) or Microsoft Excel 2004 or 2008 for Mac.
E-mail requires Apple Mail; Microsoft Entourage 2004 or 2008 for Mac
Back up to MobileMe requires paid MobileMe account available separately from Apple, Inc.
iCal, iChat, and AddressBook are included in Mac OS X. Internet access required for iChat.
Accepting credit and debit cards directly into QuickBooks 2011 for Mac requires Intuit Merchant Service for QuickBooks for Mac (sold separately); subject to application approval and debit card transactions are processed as Signature Debit which does not require entering a PIN code. See http://payments.intuit.com/legal.jsp for details.
Processing payroll, integrated with QuickBooks for Mac, requires paid subscription (sold separately), EIN and Internet access. QuickBooks 2011 for Mac works with Intuit QuickBooks Payroll for Mac.
http://www.amazon.com/Intuit-413615-QuickBooks-2011-for/dp/system-requirements/B 003YJ8WFE/ref=noref?ie=UTF8&n=229534&s=software

I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I c

I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I cannot afford an upgrade does anyone know of a work-around for this problem?

Hi Daddyfred,
CS4 Photoshop has not been tested on Yosemite. But still you can try the Java 6 update using the below link.
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Thank you for posting on Adobe Forums.

Whether the Jheadstart 9.0.5.1 Supplement Option be released ?

whether the Jheadstart 9.0.5.1 Supplement Option be released ?

Ting Rung,
We had a number of unexpected issues in combination with 9.0.5.1 we had to solve which significantly delayed the JHeadstart 9.0.5.1 release. We are now very close to releasing, we are confident we will release this week.
Steven Davelaar,
JHeadstart Team.

Can I get free upgrade if I bought Adobe product 2 days before the release of the new version?

Can I get free upgrade if I bought Adobe product 2 days before the release of the new version?

If you bought CS6, then there is no upgrade. CS6 is the last standalone version. whether or not you may be entitled to some CC discounts, if you want to go that route, is only something sales support can tell you. If they're feeling generous, they may give you one or two months completely free, but realyl, you have to contact them....
Mylenium

I was wondering if i am entitled to a free upgrade to the latest mac book pro that was recently released not that long ago?

I was wondering if i am entitled to a free upgrade to the latest mac book pro that was recently released not that long ago?

No, you're not entitled to a new MacBook. If I wanted the newest one, I'd sell the one I just bought and buy a new one.
Morgan

Problem in Upgrading to Jheadstart 9.0.5.1.11

I have upgraded our application which was developed by jheadstart 9.0.5.1.9 to jheadstart 9.0.5.1.11 using the installation guide.
Running the application, we can browse and query without any problem but when we push the save button we will receive the following errors.It seems that something is missed.
Can anybody help me?
thanks in advance.
Navid.
500 Internal Server Error
java.lang.NoSuchMethodError: java.lang.String oracle.jheadstart.view.FormElement.getPersistentAttributeWrite()
     at oracle.jheadstart.util.DataObjectHelper.addNewAttributes(DataObjectHelper.java:407)
     at oracle.jheadstart.controller.struts.action.SaveDataObjectSet.execute(SaveDataObjectSet.java:601)
     at oracle.jheadstart.controller.struts.action.JhsAction.execute(JhsAction.java:245)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at oracle.jheadstart.controller.struts.JhsRequestProcessor.processActionPerform(JhsRequestProcessor.java:351)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at oracle.jheadstart.controller.struts.JhsRequestProcessor.process(JhsRequestProcessor.java:635)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
     at oracle.jheadstart.controller.struts.JhsActionServlet.process(JhsActionServlet.java:139)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:527)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:765)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.jheadstart.controller.CharacterEncodingFilter.doFilter(CharacterEncodingFilter.java:174)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.jheadstart.controller.AuthenticationFilter.doFilter(AuthenticationFilter.java:180)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)

Hi Dear Jan
thank you very much for paying attention to my problems.
since we were using jhs 9.0.5.1 build 9, we have done the following steps according to Oracle JHeadstart 10g Installation Guide
to upgrade to jhs 9.0.5.1 build 11 :
1- Unzip the JHeadstart 9.0.5.1.11 zipfile over the JHeadstart 9.0.5.1.8/9 Home (J:)
2- Copy all jar files from J:\config\jdevaddins to [JDeveloper Install]\jdev\lib\ext\jheadstart
I verified that we are using the correct jar file by opening it with winzip and There was a file called 9.0.5.1.11 in it.
In addition, I have found that when I create EAR file and deploy it , everything is fine and I don't get those errors
but when we run using embedded OC4J, we sometimes encounter those errors.
I created a new project from scratch to test the situation and I have realized that the new project works fine without
any problem. So, I think that it should be a problem in upgrading.
Can you help me further with this problem.
Navid.

I have upgraded my iphone 4 (ios 4.3.5 to current release 5.0.1) yesterday and got an error code 1630 for carrier up-gradation failure. Now my device is not working for phoning purpose. It just stay muted at the time of call.

I have upgraded my iphone 4 by iTunes from ios version 4.3.5 to 5.0.1
and think it was the biggest mistake I have ever done.
Now my iphone basically not a celluler/mobile phone. I can't hear a single tone at the time of calling
and even the the receiver also can't here my voice. calling other and after receiving by them and to be
mute is the thing happned to me with that upgradation. before that it was working absolutely fine. I have
checked my microphone and headset by recording and it seems absolutely OK. I don't know what should
I do now?
Please help me.
I tried to downgrade my phone to 4.3.5 back but at don't accept downgradation and gives me an error code 3194

Thanks for reply,
It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
Iwish I have not upgraded.
I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
Thanks for your valued suggessions but it didn’tmade any difference to my situation.
So now I have an ipod in the price of an iPhone4. Crap.
Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users.

Any "discounted upgrade" option for new Acrobat 9 buyers when X is released?

I'm looking at buying Acrobat and as of right now, I notice that Adobe's website is only promoting the pre-ordering of version X (I can't even find an option to buy version 9 on here but can find it on Amazon and stuff).
I need to purchase a version of the software ASAP, but I'm just wondering: If I were to buy 9 now (right before release of X) is Adobe going to have an upgrade option that will allow me to upgrade to X without having to pay full price for the software? I'm looking at getting the highest level option (the $800 one).
Hopefully I posted this in the right section of the forum...
Thanks.

Thank you, George.
So, in other words, that means if I buy now through Amazon, I won't get the upgrade option (since it's a 3rd part site), despite the new release announcement, correct?
Is there a link anywhere on Adobe to buy version 9 now so I do qualify for the X upgrade? I can't seem to find one...

Information on upgrade path for Oracle CRM 11.5.10.2 to Release 12

Hi,
We are on Oracle EBS 11.5.10.2
I want to know how to upgrade Oracle CRM from 11.5.10.2 to Release 12. I have gone through Metalink note# 1081433.1 which states how to apply Oracle Customer Relationship Management Release 12.1.3 (R12.CC_PF.B.DELTA.3) which can be done only on existing R12.1 environment.
But unable to find any document or information on upgrade from 11 to R12. Please help me with the information and which path is available to upgrade CRM.
Thanks a lot.

This forum is for the Oracle CRM On Demand product. Please post your question on the correct forum.

Benefits to upgrading WLC from 4.1.185.0 to more recent release?

I currently have 3-4402 WLC controllers running 4.1.185.0. We have 45 APs that are spread out between 3 locations. Because I am new to wireless management on Cisco WLCs I need to know if there is a benefit to upgrading to more current code revisions. We currently have a mesh bridge running on two 1030 indoor APs. These are not supported on newer code releases, so I am looking for benefits great enough to warrant purchasing two new bridging APs that are supported on current code revs. Any help/insight would be greatly appreciated. The current code is working fine and we are not doing any Wireless VOIP either.

Well if your system isnt broken I am a fan of leaving it alone. Now if their are issues or if you need new options that are only in newer versions then that should be reason enough. You are on code that is like 2 - 3 years old.
If you choose to deploy 802.11n, it will require an upgrade
If you plan to deploy MESH you need to upgrade
You can take advantage of new reporting with newer code and wcs versions
If you do have issues in the future, TAC will almost likly TELL you to upgrade anyway
I hope this helps a little bud

I just upgraded to the newest release, but now when I move/save a message, auto-completion to potential folders no longer works. What happened?

When I begin typing the letters for the destination folder, before it would show a list of the targets matching so far and I was able to click on one to select it. Now I just get a generic text entry box with no intermediate feedback. I do use the add-ons muttkeys and keyconfig, but I didn't think this would affect things.

I wonder if you had another add-on. I use [https://addons.mozilla.org/en-US/thunderbird/addon/quick-folder-move/ Quick Folder Move] which does something similar to what you describe.

Firefox keeps telling me to upgrade. Even after complete uninstall and installing the newest version. Also, each time I restart my desktop I have to acknowledge about 12 add-ons. After that all works fine. Even when I restart Firefox.

I already tried uninstalling all add ons and then reinstall them again. Can the problem be related to the Siphon add on (which I no longer use)?

You posted your troubleshooting information in another thread ([[/questions/907656]]) that seems to indicate that you use or have used that profile folder with a lot of Firefox versions and are overriding the compatibility check (extensions.checkCompatibility.12.0).
You need to use a separate profile for each Firefox version if you want to use multiple Firefox versions.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

I'm having a potpourri/Hat-Trick of issues after upgrading to Firefox 7.0.1

The only reason I'm asking is because the three new issues occurred immediately after upgrading from the last install of Firefox to the newest release, Firefox 7.0.1
The first: for some reason I have to go to about:config to reset the "Close Tabs" part from 3 to the default 1 setting...which is having a Close Tab "X" on the tab. It means I have to right-click and select the bottom option on the drop down menu to close tabs I'm through with using.
The second: Most of the time Google Videos will not function on 3rd party web sites (Like "Documentary Storm"). I have to redirect to the Google Video webpage to watch Google featured documentaries that have been embedded in some documentary sites.
There are now more frequent error messages of "Not Responding" on websites...the screen locks up for a few seconds before going backwards or forwards (On "The Chive", "The Brigade", and many other picture or video oriented websites.) The scroll bar on the right side of the screen is also locking up which means the "Not Responding" error message is popping up for this also.
All of these are different from each other and at first thought would be issues I need to take up with tech support for the different programs I use. That is my next step, but I was very curious if anybody else was having similiar problems after upgrading to Firefox 7.0.1.
I'm not sure if a couple things might be set off by incompatible Addons. None of the symptoms jive with known incompatibility problems with 7.0.1. and with none of my Addons either. It was just very coincidental things went awry in 3 different areas that had worked 10 minutes previous to the upgrade.
Any ideas or similarity with other folk's upgrade issues?
Thanks tons for any advice given! Hoping it's something ridiculously easy. : /
Oh yeah...all other programs are up to date. Freakishly OCD about keeping current with programs.

Thank you for describing the problems so well. I also have been going nuts trying to restore my Itunes Library to its original (or acceptable) condition. I have a 5th gen 30G Video with about 4250 songs on it. After downloading 7 I found that every song in my Library had been dulplicated or triplicated. Then, a day latr, when I had downloaded album art, I discovered that every other song in any album I had downloaded (from Itunes or my own cd)prior to perhaps version 5 or version 6 could not be found. Luckily, I had an generation 4 Ipod with the original Library and I was able to download that to my external harddrive. I have spending pointless, arduous hours pointing Itunes to the correct file. Its faster to re-download the CD. Of course, I can't do that for any music I had bought from Itunes directly. Its weird because the name of the song is in Itunes, just the file can't be found. And why every other file? When I go into earlier (6 and before)Itunes Libraries, the music files are missing from them. Where did they go? When I try to sync my Ipod with Itunes, it takes forever because Itunes is searching for the missing files. I have tried to ask Apple support directly but I have gotten no response. Very, very frustrating! Any headway with your problems? Lisa

Upgrade of jHeadstart 10.1.3.2.53 to newest release

Similar Messages

Maybe you are looking for