Upgrade of Portal system to EHP1

Hi All,
I need to perform portal upgrade of our system to EHP1 which has ESS/MSS installed in it,I have just started referring documents at service market place,could any provide me suitable links.
Regards
Uday

Greetings Uday,
as per Note:908569 you need to have the following:
-SAPPCUIGP14_0.sca
-SAPESS14_0.sca
-BP ERP05 ESS 1.0       SP14
-SAPMSS14_0.sca
-BP ERP05 MSS 1.0       SP14
R/3 side:
SAP HR 6.00            SP34
EA-APPL 600            SP14
EA-HR 600              SP34
EA-FINSERV 600         SP14
EA-PS 600              SP14
EA-RETAIL 600          SP14
EA-GLTRADE 600         SP14
EA-DFPS 600            SP14
EA-IPPE 400            SP14
Please check Note:1226233 SAP ERP 6.0 SP Stack 14 (11/2008) for further information from ECC side. Also, there are
some notes that might fit your need. Check it:
#1359937: EHP4: Further considerations for ESS/MSS
#1303362: ESS/MSS and Enhancement Packages
#1248905: SP Equivalence for update/upgrade to EHP 1 for SAP NW 7.0
I hope this helps.
Best regards,
Tomas Black

Similar Messages

Upgrading/Migrating Portal System from EP 6.40 SP21 to EP 7.0 SP2

Upgrading/Migrating Portal System from EP 6.40 SP21 to EP 7.0 SP2
IN EP 6.40 we have ESS/MSS 60.2.2,KM,NWDI ,IN BAck end we have ECC 6.0 .
COuld you let me what are the list of measures/Prerequisites i need to take before going for upgrade .

Hi,
You can upgrade your portal with all usages that you have installed. You need to check upgrade guide as well.
You need to check if there is any custom development on the portal to migrate it to new version.
Thanks
Sunny

ECC EHP5 upgrade:is i mandatory to upgrade netweaver portal & BI systems

Hi Gurus,
Currently we are having landscape of :
1.SAP ECC6.0 SP stack at 17
2.Netweaver Portal 7.0 SP stack at 17
3.Netweaver BI 7.0 SP stack at 12
Currently, viewing BI reports using Portal.
We are planning to upgrade our ECC 6.0 system only to EHP5
My questions are:
1. Is it mandatory to upgrade netweaver portal and BI systems also.
2. We are very less dependent on BI. So, can we continue with the same old BI system with ECC6.0 upgraded to EHP5?
Please shed some light on this.
Thanks in Advance.
Regards
Balaji Nampally

There is no any specific details available for the same.. But it seems some BPs need to be upgrade on portals side..
SAP ESS 603(SP06)                                 BP ERP05 ESS 1.41
SAP MSS 600(SP17)                                 BP ERP05 MSS 1.51
SAP PCUI_GP 603                                 BP ERP05 COMMON PARTS 1.51
                                                      BP ERP05 HR ADMINISTRATOR 1.51
                                                      BP ERP05 SELF-SERV ADMIN 1.0
                                                      BP TECHNICAL INFORMATION 1.51
Pl provide if any has more details.. we are also looking for the same..
Thanks

Upgrade Enterprise Portal from EHP1 SP5 to EHP2 SP7

How do we upgrade from EHP1 SP5 to EHP2 SP7 ?
Can we do that directly from JSPM or i should go with ehpi ?
Just download all the files of EHP2 SP7 to EPS/in directlry and start JSPM ?
or
Upgrade EHP1 to SP5 then run PREPARE tasks from the DVD's then apply the SP's.
Let me know your thoughts.
Thanks

Hi Markus,
I've upgraded Standalone JAVA stack from EHP1 -> EHP2 and basically, what EHPI did was just call up JSPM and perform the upgrade. Therefore, is feasible to upgrade standalone JAVA system via JSPM, of cos generate XML with MOPZ.
also, from sap note 1472520:
8. Question: Can I use JSPM for applying EHPs on JAVA only systems?
Answer:
Yes. On Java standalone systems it makes more sense using JSPM as a standalone tool using 'support package stack' option instead of running EHPI. Whereas on dual stack (ABAP + Java systems) you have to use EHPI with the exception of Solution Manager systems (see SAP note 1245473 for SolMan EHP installations).
Cheers,
Nicholas Chang

Import Support pack in Portal system with ESS & NWDI.

Hi ,
NW Portal system has the current support pack level of JAVA stack 11 which includes ESS business backages SAP_ESS 603 SP1, BP_ERP5***,BP_ERP5COM,BP_ERP5ESS, BP_ERP5HRA, BP_ERP5PSS 1.0 SP12. We are using NWDS for doing some customizing the ESS portal iViews configuration and transporting through NWDI tracks.
If we are upgrading the support pack for netweaver and portal, whether the business packages and the java stack needs to be go through JSPM or through NWDI transport?
At the same time we like to upgrade the SLD system which has only JAVA stack installed separately. What are the thing that we need to do in SLD before & after updating the support packages like CIM model, etc.
As we are having the JAVA stack NETWEAVER 7.0,Eventhough SOLMAN mopz decides the level of SP level, but is it good to go to EHP1 or stay in the current Netweaver 7.0 Java stack and our current ECC are going to be in the Netweaver 7.0 Java.
Thanks
John

John,
If we are upgrading the support pack for netweaver and portal, whether the business packages and the java stack needs to be go through JSPM or through NWDI transport?
JSPM only
At the same time we like to upgrade the SLD system which has only JAVA stack installed separately. What are the thing that we need to do in SLD before & after updating the support packages like CIM model, etc.
May be you want to trigger data push manually once from all system to make sure if everything is working fine , other than this nothing
As we are having the JAVA stack NETWEAVER 7.0,Eventhough SOLMAN mopz decides the level of SP level, but is it good to go to EHP1 or stay in the current Netweaver 7.0 Java stack and our current ECC are going to be in the Netweaver 7.0 Java.
Its good to go with latest , but to be in sync with ECC you can continue with 7.0.
Regards,

CRM Upgrade from 7.0 to EhP1 Error - The requested resource does not exist

Hello All,
We have recently upgrade our pilot system in CRM from CRM 7.0 to Ehp1. The upgrade was successful.
However, when I login into the WebUI, I get an error message as follows:
404 Not Found
The requested resource does not exist
Details: Go to main page of this application
I got in touch with the Basis team and tried to activate some services through SICF that were deactivated because of the upgrade. But we still encounter the above error everytime I tried logging into WebUI.
I kindly request to provide some pointers towards the resolution of the same.
Thanks and regards,
VSK.

Hi,
please try to activate all SICF services under sap->bc->bsp.
If needed deactivate them and activate afterwards again to be sure all services are active.
Good luck
Kind regards
Manfred

Upgrade only Java stack to Ehp1 (SAPehpi)

Hi Gurus,
We are currently on PI 7.1, and is considering to upgrade to Ehp1 (primarily for IDoc packaging feature)
and since the IDoc packaging feature is delivered thru a Sender IDoc adapter, which means this seats on the Adapter Engine already (Java stack)
I saw the document for SAPehpi (Upgrading to Ehp1 for a PI 7.1 system) and if i understand it correctly there are two options,
one ABAP + JAVA upgrade and the other is JAVA only upgrade.
So does that mean I can upgrade my Adapter Engine (AAE) to Ehp1 using the JAVA only upgrade option?
My apologies in advance as i have no experience yet in upgrading 7.1 systems
Thanks

> So with that, if we stay on 7.1, then we don't have an option for IDoc packaging (IDoc package inbound to PI will be split into individual IDocs, then will have to use an integration process Collect to re-package it as 1) ?
Even when you apply EhP1, you can use IDoc packaging only, if your sender system is also on SAP BASIS 7.1 EhP1 or SAP BASIS 7.0 Ehp1.
So you should confirm this first.

SAP Netweaver 7.01 to 7.3 Upgrade (Enterprise Portal)

Hi,
I'm just trying to upgrade to Netweaver 730 from 701 (Enterprise Portal).
At the start of the upgrade program "startup" from the Upgrade Master DVD I get the following error:
as-sap-t43:tp3adm 47> ./STARTUP
Checking if C++ runtime is installed ...
Running MIDBOOT to unpack and startup...
Determined SAP system ID as 'TP3'
Starting upgrade to SAP systems based on SAP Netweaver 7.30
Using upgrade directory /usr/sap/TP3/upg
Locating SAPCAR
ERROR: Data unit with attributes 'type=SAPCAR;osname=LINUX_PPC64' not found.
Unfortunately I could find nothing about this error in the marketpplace or in the SDN.
Can someone help me???
Sincerely
Norbert

Hi,
Could you please check if SAPCAR is there in kernel directory ?
Thanks
Sunny

Upgrade to NW 7.3 EHp1

Hi Guys,
I'm planning to upgrade our SAp Portal(AS JAVA) from NW 7.0 EHP2 SP6 to the latest version of NW.
and I have two questions:
First Q.: "Could you please help me to find any related information regarding SPs available for NW 7.3 EHP1."
I find two latest versions:
1- NW 7.3 sps7
2- NW 7.3 EHP1 SP?
but under
https://websmp103.sap-ag.de/sp-stacks "Sp Stack Information" or "SP Stacks maintenance schedule" I can't find any release information for NW 7.3 EHP1.
Second Q.: " If I want to upgrade to NW 7.3 EHp1 SP? , should I perform two upgrade
                               1-upgrade to NW 7.3
                               2- Upgrade to NW 7.3 EHp1 sp?
                      Or I just can upgrade directly from NW 7 EHP2 SP6 to NW 7.3 EHP1 SP?
Thanks
Edited by: Mar V on Feb 29, 2012 4:29 PM

Hi,
I am also trying to update EHP1 to NW PI 7.3 (AEX), but there is no option to install this EHP in MOPZ.
Did you ever meet this issue?
I have post a thread at this:
Update EHP1 to Netweaver PI 7.3 (JAVA ONLY) issue
any ideas?
Thanks!

ABAP/J2EE upgrade from 7.0 to EHP1...failed at START_J2EE_EP

Hi experts,
I'm currently running a dual stack upgrade from 7.0 to EHP1 SR1 on a 32bit windows system. I'm using SAPup and Jup and I'm currently stuck on the Java step START_J2EE_EP the main clue I get from the logs is "Can't open shared memory administration (rc = 3)"......there's also another similar message with a different return code - " Can't open shared memory administration (rc = -107)"....
I can't seem to find anything that has resolved the problem.
Any help would be much appreciated.
Cheers,
JB

Hi Martin,
Thanks for the info.
I basically changed the phase list xml file so that I could skip over this step as well as others that depended on waiting for the events from the parallel ABAP upgrade.
So I was able to finish the uprade successfully. But I tried to update the java stack with the latest support pack stack and it failed part way through. Now my server0 won't start......I'll be posting the problem shortly in a new thread.
Thanks again!
JB

100% Cpu on One of our portal system

Hi All,
We are facing problem in one of our portal system where the cpu usage is going upto 100%. We have checked trace and other things but seems to be fine.
At database level following query is taking all the cpu. We are not sure what exactly it is
"SELECT
DISTINCT "V"."OBJECTID"
FROM
"DAV_CONTENTSTORE" "CS" INNER JOIN "DAV_RESOURCE" "R" ON "R"."CONTENTS
TOREID" = "CS"."CONTENTSTOREID" INNER JOIN "PVC_VERSION" "V" ON "V"."V
ERSIONID" = "R"."RESOURCEID" INNER JOIN "PVC_VERSIONSET" "VS" ON "VS".
"EXTERNALPROPERTY" = :1 AND "VS"."EXTERNALTYPE" = :2 INNER JOIN "PVC_V
SETELEMENT" "VSE" ON "VS"."VERSIONSETID" = "VSE"."VERSIONSETID" INNER
JOIN "PVC_VERSIONEDOBJ" "VO" ON "VSE"."OBJECTID" = "VO"."OBJECTID"
WHERE
"CS"."ISINDELTA" = :3 AND "CS"."DELTAALGORITHM" = :4 AND
"R"."RESOURCETYPE" = :5 AND "R"."PATHURI" LIKE :6 AND "R"."OBJNAME" >=
:7 AND "R"."OBJNAME" < :8 AND "VO"."OBJECTTYPE" = :9 AND
"V"."VERSIONID" = "VSE"."VERSIONID" AND "V"."OBJECTID" > :10
ORDER BY
The above is cpu intensive query and at os level we can see it is taking 100% cpu.
Can somebody help us to understand what is this query doing and how we can stop it occuring in the system.
Regards
Deepak

wilberfan wrote:
Dual-core, 32-bit Intel machine. Did an -Syu two nights ago. A dozen or so packages upgraded--including (I remember) the latest nvidia (302.17-1).
When I first boot-up, I get 100% CPU on one of the cores. htop reveals that it's the X session that's running away (?) Rebooting seems to take care of it--although I don't understand why yet...
Anyone experiencing this--or have any suggestions on what I could look at to see what the problem might be?
Thanks in advance...
I had this problem with mount. In fact asking the system for shutdown would set a live lock on a mount process taking one core.

I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new Ipome and Ipad. and Ipad. Now I'm told I need to upgrade my operating system. The apple store gave me conflicting instructions. Any suggestions? Thanks

I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new IPhone and Ipad. Now I'm told at the apple store that I need to upgrade my operationg system. They said they couldn't help and gave me conflicting advice about what to do. Any ideas? Thanks you!

There are three models of MacBook that comprise the 'macbook 4.1' category, and each of them a little different; however other than 'macbook 4.1' the other thing they have in common is they all are considered Early 2008. Two are white, one black, polycarbonate case, Core2Duo 2.1GHz, 2.4GHz white, 2.4GHz black.
So if you can determine which one, if any of these, is the model build year and spec you have, that would be handy. Did you tell whoever you spoke to the serial number of your computer, so they'd know by looking up the specs to see what the supported maximum RAM upgrade capacity was, and other minimum requirements to make any upgrade to Mac OS X 10.6.8 at all?
If you have the serial number you can do a lookup to 'indentify by serial number' online, and use that information to determine if the computer needs even more RAM to take it past the minimum for Snow Leopard 10.6.8 and then get it ready to upgrade (via paid download from App Store, Snow Leopard gets you that far) and see what the next supported OS X full upgrade would be for the hardware limitations on that old MacBook.
If your MacBook IS a 4.1 build, the highest OS X it could run if it has the 2.4GHz cpu, is Lion 10.7.5. That would be an upgrade from the App store, available to OS X 10.6.8+ computers that access it online. And I kind of doubt how supported a newest iphone etc may be in lion.
everymac.com has a fair amount of information across many years of Apple computing hardware...
Here's the three MacBooks that share the 4.1 designation; first shipped with as much as 1GB RAM upgrade and the other two only a 2GB RAM*, (one white/one black color) according to this information...
• MacBook "Core 2 Duo" 2.1 13" (White-08) 2.1 GHz Core 2 Duo (T8100)
• MacBook "Core 2 Duo" 2.4 13" (White-08) 2.4 GHz Core 2 Duo (T8300)
• MacBook "Core 2 Duo" 2.4 13" (Black-08) 2.4 GHz Core 2 Duo (T8300)
...as seen here: http://www.everymac.com/systems/apple/macbook/index-macbook.html
*But according to MacTracker (free: download database) http://mactracker.ca
these MacBooks can use more RAM in aftermarket specs as much as:
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
To get more information use a service such as this...
•identify by serial number:
http://www.powerbookmedic.com/identify-mac-serial.php
The Apple? store or whoever you talked, to may have been as accurate as they could be without further research. Could be you may have a newer or older MacBook, which would change whatever later OS X it could run past 10.6.8. And to go past Snow Leopard, you need to download the last bits for 10.6.x to be able to go and get any later upgrade. The ones that may let a newest iphone or ipad work with it, are past SL10.6.8
Anyway, as you further verify the model build year and configuration specifications, report back.
Good luck & happy computing!

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

iCloud requires OS X 10.7.2.

Context Menu in BW Report Iview not opening after upgrade to Portal 7.3

Hi All,
We have a unusual problem that, the Context menu of the BW reports for options like filtering is not opening post Upgrade to Portal 7.3 for End users.
However, with Super Admin role, the Context menu opens for the BW report Iview.
I have tried giving the same permission that the Super Admin Role has on the BW Report Iview to the End users, still no success.
Any idea? Anybody faced same kind of problem?
Please revert for any more info.
BR,
Uday

Hi Uday,
This is really a shot in the dark since I have not done much with 7.3. Have you checked for UME actions that are assigned to the administrator but not the end user?
Best regards,
Duncan

HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. MY question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this aren't working

HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. My question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this, such as using turning off the SMS preview under the "passcode lock", well that option no longer exists, or if it does, I'm somehow missing it.
When I go to the "messages" setting under settings on my phone, I still don't see an option of turning it off.
If I can just get the name of the person sending the message, as I had it before, I'd be happy.
Help!

That option still exists in Settings > Notifications > Messages > Show Prview (OFF) and View in Lock Screen (ON). Here's how to configure your Notifications and Notification Center for iOS 5: http://iphone-and-i.blogspot.com/2012/01/how-to-customize-notification-center-in .html

Upgrade of Portal system to EHP1

Similar Messages

Maybe you are looking for