Upgrade of SAP PPM version 5.0 from current 4.0
HI Everyone, A warm reagrds! W e are planning to upgrade our current SAP Product and Portfolio Management 4.0 to 5.0.While doing the Upgrade analysis I have come across below these questions..Has anyone earlier in this forum have come across
1.What are the side effects of this upgrade on existing system?
2. We have 21 client environment on top of the 3 standard clients provided by SAP. What can be the best approach for upgrading the systems? Some of these clients are used by project teams for prototype development , how would the upgrade affect their working (they are not working on this package)?
3. Our team is working on this package in one of the client and have created scenarios in the system. What will be the effect of this upgrade ? (this question can be seen as an extension to question 1)
4. How much effort would be required to carry out this upgrade and what will be the down time for the system?
I have check the service market place and help.sap but at present not getting much info..
Thanks for your time to read..
Hi,
2. We have 21 client environment on top of the 3 standard clients provided by SAP. What can be the best approach for upgrading the systems? Some of these clients are used by project teams for prototype development , how would the upgrade affect their working (they are not working on this package)?
All the clients will be effected and the prototyping done may not be applicable any longer. When you do a upgrade it is client independent.
3. Our team is working on this package in one of the client and have created scenarios in the system. What will be the effect of this upgrade ? (this question can be seen as an extension to question 1)
The scenarios may or may not be affected depending on the objects involved. Intense testing will be required.
4. How much effort would be required to carry out this upgrade and what will be the down time for the system?
This differs from customer to customer depending on the functionalities that are already in place.
Hope this helps,
regards
N K
Similar Messages
-
Not all sites show all details because I have an older version of Firefox.
You can find the latest Firefox releases here:
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html -
Key functional differences between SAP ECC Version 6.0 and SAP Version 4.6
Hi Forum,
As we are currently updgqrading to SAP ECC Version 6.0 from SAP Version 4.6, could someone please identify what are the new functionalities are being offred in SAP ECC 6.0.
Please let me know or guide me in a right direction - my email address is [email protected] or simply reply to the forum.
Thank you
YogeshDear Yogesh,
Please go through Upgrade info @ service.sap.com.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack.
4.6C supports NONUNICODE.
Hope this would add some more info.
Regards,
Naveen. -
What would impact if SAP GUI needs to be upgraded to the lates version 710
Hi guys
could you tell me ..
if we will do upgrade "SAP GUI needs to be upgraded to the lates version 710"
what would be the impact to 'end user GUI' and how we are addressing it?Hi,
what do you mean by end user GUI... is that portal impact are you talking about?
also check the below threads
sap Gui 7.1
GUI Upgraded from 640 to 710
hope it may help you.
Raghu -
Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
Rp1. in physical connections part can i use the same work schema
2. Can i use same contexts created or do i need to create everything as new and then try?
Thanks,
Rp.
Hi,
As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it) -
I downloaded a film from ITunes in HD and had problems, I upgraded to the latest version of ITunes and have then downloaded the film again in SD on my Windows 7 computer, but I still can't get the film to play, any idea's what to do next?
I've been working at the same problem for hours now and it's really driving me crazy so any help would be greatly appreciated.It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?
ThanksCME is part of the IOS, so you can't upgrade the IOS seperately from CME.
That said, if this is a production environment you should proceed with caution and be prepared to roll back as you may find bugs, etc.
You should also look at release notes and make sure your phone firmware will still work or needs to be upgraded too.
Brandon -
I am trying to load LR on my new macbook pro. It asks for the serial number. I enter the digits, but it says, quote, " This is an upgrade serial number. The serial number from your previous version of Lightroom is also required."
If you still have the old computer and it is a MAC, the Lightroom 5 serial numbers are in a text file.
users/"username"/Library/Application Support/Adobe/Lightroom/Lightroom 5.0 Registration
More info here
Preference and other file locations in Lightroom 5 -
Upgrade trial version using code from purchased discs?
I recently purchased the adobe photoshop elements 12 & adobe premiere elements 12 package. When I tried to load the software onto my computer, it wouldn't work. I purchased the software from Amazon and they suggested (before returning the software) that I try downloading the trial versions and use the code from my discs to upgrade to the full version. Is this possible?
It is worth a try - normally it will work....
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us
Alternate trial download site:
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html -
I cannot download info from my banking site since upgrading to the last version of Firefox
I can no longer download parts of my banking info since upgrading to the latest version of Firefox. Prior to this I had no problem bringing up statements. Now it gives me giberish. The bank says it supports up to 3.0 version, but not the later versions.
I think you must download and install the other supported version(except the latest 9.0.x) which is '''3.6.25''' from here:
http://www.mozilla.org/en-US/firefox/all-older.html
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
How can I upgrade to the final version of IOS 7 if I already have the latest beta version? I am from Guatemala, but I have an Ipod 5th gen and I am registered to the USA. What can I do?
You say you have iOS 7. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own -
I just purchased LR5 online and installed it on my PC. I entered the serial number I was given and it said "this is an upgrade serial number. The serial number from your previous version of LR is also required." Since I just bought it I don't have a previous serial number. What do I enter?
You return the upgrade version since it was purchased in error
Return, cancel, or exchange an Adobe order
Purchase a full version. -
How to open older version of iPhoto from an external drive. It won't let me open or upgrade to the latest version?
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what fixes have you tried?
how is the EHD where the library is located formatted?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
Hi there. Can a MacBook from mid 2007 running OS X (10.6.8) be upgraded to a later version? If yes which one and how can I get it please? Many thanks. Franck
10.7 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. The price is $19.99.
You must have at least a Late 2006 model 2,1 MacBook.
The model 2,1 (Late 2006 & Mid 2007) can use 3gb of 200 pin 667mhz PC2-5300 RAM
The model 3,1 (Late 2007) can use 6gb of 200 pin 667mhz PC2-5300 RAM
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. You can put two 2gb RAM sticks in the model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
http://en.wikipedia.org/wiki/3_GB_barrier
http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. the model 2,1 is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
i just bought ilife11 from a friend and tried to install it but it says I need to have 10.6 or later. I have 10.5.8. Can I upgrade to the latest version with a "download" ?
entatty5 wrote:
... snow leopard, which I don't have. Do I have to go program upgrade by upgrade? I can't just go from 10.5.8 to the latest? Thanks for the help.
You need Snow Leopard before you can go to Lion...
Check that your Mac meets the System Requirements...
Snow Leopard Specs:
http://support.apple.com/kb/SP575
Lion Specs:
http://www.apple.com/macosx/specs.html
Maybe you are looking for
-
How can i transfer my music from one account to another on a different computer?
So i have an itunes account on dell laptop and i share that account with other famliy members. I recently bought a mac pro and wanted to create a new account that way i can use icloud, is there any possible way to transfer everything from my old libr
-
How do I add a new credit/debit card to make payments on my iTunes account.?
-
Error in configuration b/w database application table comnnector and OIMg11
Hi Gurus, I am getting following error while configuring database application table connector for reconcillation with OIMg11. Any idea what might be the issue here, I have searched the forums and tried the possible solutions mentioned there. Caused B
-
Hi All, I am wanted to Customization for existed oracle standard Report(VAT Sales Report).I just want to add 4 more fields. So that i have increase the "Main section width and hight" While i am trying to expand the Main frame i am getting the error f
-
EQ is currently set to off, how do i set it to on?