Upgrade of SD to SAP ERP 2005,   FI stays on SAP R/3 4.0

Hi,
There is a task to upgrade first the SD module to SAP ERP 2005,
but keep the FI module running on SAP R/3 4.0
Is it possible to implement it like this?
Have anyone been dealing with such distributed integration before?
Best regards
Maxim

Technically you can upgrade  , but SD is highly integrated with FI  like credit check , tax  etc . With the upgrade it might change the structure of table the link between both the system might effected. You should talk to the Functional consultants and they can give you the advice
Thanks
Prince Jose

Similar Messages

  • SAP ERP 2005 ECC 6.0 with Windows 2000 Application Server

    Hi,
    We are currently running SAP 4.6C in iSeries model 570 OS V5R3.
    I would like to know after upgrade from 4.6C to ERP 2005 ECC 6.0 if we will gain any performance improvement by adding Windows 2000 Application Servers in our environment.  Second Question - how much load will be taking away from the iSeries if adding one application server (Memory and CPU).
    Ramon

    Hi Ramon,
    what hardware do you use at the moment ?
    820, 870, 5xx ?
    How any CPUs ?
    How much memory ?
    You are on 4.6C ASCII right now ?
    In your case, I don't see, that Win 2003 servers help in performance, I would guess, that the CPU after the upgrade is about 60% which is still ok - then using 3-tier - especially in R3 environments is mostly not good for the performance because of the DB time increasement.
    The memory you will need is pretty the same for the iSeries.
    Regards
    Volker Gueldenpfennig, consolut.gmbh
    http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

  • CU & UC from 46c to ERP 2005

    Hi,
    I am in Planning phase for CU & UC from 46c to ERP 2005 need to know few things
    - Hardware requirement for Unicode preparation system - CPU/ Memory and Storage - I am planning to use Copy of Prod for Unicode prep system : My prod DB is 1TB.. Which SAP verion is recommanded for Unicode Prep- 4.7 on 620  or directely ERP2004  / 640 or  ERP 2005700
    - Storage requirement for Export  dump for 1TB database ??
    - Approximate Timing to export / import -- I know it depends on CPU's/ memory etc os source/ target ... in general ??
    - SAP suggest 10-30% increase in Memory - any comments ?
    - SAP suggest  40-50% increase CPU usage - any comments ?
    One last question :
    i am planning to use parallel landscape for this for non-prod but Prod I am planning to use same hardware as it is today. any comments on this idea ?
    Awating response from experts... thanks in advance....
    Jignesh

    Hello Jignesh,
    >> I am planning to use Copy of Prod for Unicode prep system : My prod DB is 1TB.. Which SAP verion is recommanded for Unicode Prep- 4.7 on 620 or directely ERP2004 / 640 or ERP 2005700
    As you told you have 4.6c ... why are you want to make a copy of the prod system? You can make all preparations for that in the "Live"-system and upgrade directly to ERP 2005 (take a look at sapnote #928729). After that you can make the unicode conversion... i have done a CU&UC for 4.6c to ERP 2005 ... the steps are:
    1) Make preparations in 4.6c
    2) Upgrade your 4.6c to ERP 2005
    3) Make the unicode conversion
    4) Make After-Steps
    >> Storage requirement for Export dump for 1TB database ??
    I have exported a 2.4 TB database.. the export data was round about 550 GB
    >> Approximate Timing to export / import -- I know it depends on CPU's/ memory etc os source/ target ... in general ??
    There is no general.. in my experience it depends on the biggest tables (if you export parallel) and the cpu for the convertion. I have used distribution monitor and table splitting to get good export times. Only to say some values.. i needed round about 13 hours for exporting and importing the 2.4 TB database with the distribution monitor (package & table splitting)
    >> SAP suggest 10-30% increase in Memory - any comments ?
    >> SAP suggest 40-50% increase CPU usage - any comments ?
    I have seen that the memory is really a big topic.. but the CPU was not as expected... but this also depends on the amount of parallel users. In my experience memory +40% and cpu +25%.
    Regards
    Stefan

  • ERP 2005 syntax check

    We recently upgraded a sandbox system to ERP 2005 from 4.6C.
    We have unicode turned off.
    Even with unicode turned off - we are finding that there are some of our custom programs that now have syntax errors.
    For example - in a function module the 'top' include cannot have any code in it
    It can only have data declarations.
    We are wanting to find these errors so that we can correct them before we upgrade our development box.
    We have tried SGEN - but it doesn't appear to find any syntax errors.
    It just regenerates what is already there.
    Is there a way to find syntax errors in all of our custom written code?
    Thanks
    Scott

    we found that code inspector (transaction sci) will do this.
    Thanks.
    Scott

  • 4.6c - ERP 2005 HR issues

    Hi all,
    Can you please share your experieces in upgrading from 4.6C to ERP 2005 specifically on HR module. we are staring our project soon. Please let me know any precautions known to be taken and all challenges you all faced. please feel free to share other module exepriences also.
    Thanks.

    See thread:
    Regards
    /Björn

  • Upgrade from SAP R/3 4.7 to mySAP ERP 2005 : technical changes

    Hi All,
    I wanted to know what objects(tables,structures,data elements ,ZPrograms,SAP Programs,Roles etc..) in d the entire SAP landscape will bear difference when compared with older version (SAP R/3 4.7).
    I would like to know technically which objects will be modified after the system is upgraded.
    Need urgent reply,
    Answers will be rewarded

    Dear Rohan,
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005

    Hi there
    I need help as we are planning to upgrade from R/3 4.6C to my SAP ERP 2005, I need the help in the context that
    . How much it will effect the prevoius functionalities, business processes user exits, reports, transactions and etc which thing one should have to keep in mind I need an general overview on this.
    2. What is the SAP best practice for Upgrade.
    3. Which things should be consider before upgrade.
    Thanks and Kind Regards
    Sohail

    Hi Sohail,
    For functional improvement between the releases you can find information in the release notes for example http://service.sap.com/releasenotes
    Also you can find http://service.sap.com/upgrade for very useful entrypoint for any information regarding upgrade.
    For more information, please check this links.
    http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
    http://www.sap.com/solutions/business-suite/erp/index.epx
    https://websmp103.sap-ag.de/~form/handler?_APP=00200682500000001266&_EVENT=DISPLAY
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • ESS My SAP ERP 2005 Business Package

    Hi all,
    I am not able to download My SAP ERP2005 Business Package from SDN. It shows as restricited shipment. Any idea how i can downlaod the same fom SDN or a link to servic emarket place from where i can
    Appreciate inputs.
    regards
    Sam

    Hello Sameer,
    Go to http://service.sap.com and then SAP Support Portal > Downloads > Download > Installations & Upgrades > Entry by Application Group > Installations and Upgrades > SAP Application Components > SAP ERP > SAP ERP 2005 .
    We got ESS in our SAP ERP 2005 installation pack which is downloaded from the aforementioned link.
    Regards,
    Ahmad

  • SAP ERP 2005 SR 2 IDES installation error in step "Run ABAP Reports"

    Hello,
    I'm installing SAP ERP 2005 SR 2 IDES on Win2003 R2 SP2 and Oracle 10.2 to create a test-system for my diploma thesis.
    During the step "Import ABAP" I got the following message:
    object_checker.log
    ERROR: 2008-05-21 20:50:38
    1 objects have error/ignore/execute or unknown status in the task lines.
    Invalid objects are saved in 'invalid_objects.txt' file.
    invalid_objects.txt
    package   object  type  action  status
    SAPDFACT  ?N      pkey  create
    but the installation went on until "Run ABAP Reports".
    Warnings and Errors in sapinst.log are:
    WARNING 2008-05-27 15:09:36
    Execution of the command "C:\usr\sap\IMP\SYS\exe\uc\NTI386\stopsap.exe name=IMP nr=00 SAPDIAHOST=imperia-sap" finished with return code -1. Output:
    STOPSAP: execution of C:\usr\sap\IMP\SYS\exe\uc\NTI386\sapntwaitforhalt.exe name=IMP nr=00 SAPDIAHOST=imperia-sap 3600 failed
    Details are written to C:\Programme\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\stopsap.log
    WARNING 2008-05-27 15:09:36
    Could not stop instance 'DVEBMGS00' of SAP system IMP.
    WARNING 2008-05-27 15:09:38
    Connect to message server (imperia-sap/3900) failed: NIECONN_REFUSED.
    WARNING[E] 2008-05-27 15:12:05
    FSL-06002  Error 1060 (Der angegebene Dienst ist kein installierter Dienst.) in execution of a 'OpenService' function, line (266), with parameter (sapccmsr.00).
    WARNING[E] 2008-05-27 15:21:42
    FRF-00007  Unable to open RFC connection.
    ERROR 2008-05-27 16:30:15
    FRF-00025  Unable to call function. Error message: connection closed without message (CM_NO_DATA_RECEIVED) .
    INFO 2008-05-27 16:30:19
    RFC connection closed.
    ERROR 2008-05-27 16:30:45
    MUT-03025  Caught ERfcExcept in Modulecall: connection closed without message (CM_NO_DATA_RECEIVED).
    ERROR 2008-05-27 16:30:47
    FCO-00011  The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR .
    Full log of today is available at [http://pastebin.com/f43531f97]
    Has anyone an idea how I can finish this installation?
    Thx
    Daniele

    It seems that the system did not come up and thus the RFC call fails.
    What´s the output of
    dev_w0
    dev_disp
    (in the ...work directory)?
    Markus

  • Sap FICO Certification for Financial Accounting with mySAP ERP 2005

    Hi,
    I would like to write SAP-FICO Certification for Financial Accounting with mySAP ERP 2005
    Topic areas:
    SAP overview, Financial Accounting Master Data, Document and Posting Control,Special General Ledger Transactions, Document Parking, Substitution and Validation ,Payment Program, Dunning Program, Correspondence, Interest Calculation,Evaluation Options in Reporting ,Closing Operations in Financial Accounting ,Asset Accounting,The New General Ledger,SAP Solution Manager.
    If anyone have the Material for above topics, please send me my mail Id: [email protected]
    if anyone appeared recently for certification for the same code, please send model questions and answers.
    i will be very thankfull to you.
    Regards,
    Satyaprakash

    Hi
    I am also writing SAP-FICO Certification for Financial Accounting with mySAP ERP 2005.
    Request you to send me whatever the material you have in this regard.
    thanking you in advance
    Suri

  • Upgrade batch inputs from 4.6C to mySAP ERP 2005

    Hi,
    we are planning to upgrade from 4.6C to mySAP ERP 2005 (ECC 6.0). We are using batch input/call transaction in various (interface) programs (primarily in modules SD, MM, CS/SM, FI, CO). I would be grateful for any information that helps to estimate the effort to upgrade our batch input code. In which areas/modules/transactions did you encounter problems with batch inputs? How severe were these problems (one or two fields moved to another screen, or major redesign)? How did you address these problems (change BI or convert code to use BAPI)?
    Thank you
    Thomas

    Hi thomas,
    we were working on batch input's and our scenario is something like convertion of bdc's from 4.5b to ECC5. well, it was a long process of upgradation. and coming to the part of BDC's
    Q) any information that helps to estimate the effort to upgrade our batch input code.
       we had 300 BDC's to convert from 4.5b to ECC5 and with a ten member team of ABAP experts it took us 30 working days to complete the process.
    Q) In which areas/modules/transactions did you encounter problems with batch inputs?
       Mostly, we had problems from FI and something like in Revenue recognition process. The problems comes, when the whole transactions screens changes for the process. at this time we have to write completly a new BDC's. if we have right functional specifications and functional experts, it will be easy to convert BDC's.
    Q) How severe were these problems (one or two fields moved to another screen, or major redesign)?
        As i have mentioned, out of 300 almost 25 to 50 were minor changes rest were huge changes.  a completely new BDC's. the point here is, we were updating from 4.5b to ECC5. it might not be this scenario for 4.6c to ECC5
    Q) How did you address these problems (change BI or convert code to use BAPI)?
       well, this is were we are curently working now. and curently there are 4 scenarios (and may be more in the future) were we have to replace three BDC's which are used for material master creation and make it into one bapi satisfying all the conditions of BDC's. actually, we have to find a BAPI( which i couldn't find) so, i have created a bapi. and tougher part is writing exceptions as we cannot write exceptions as we do in function module.
    hope this is relavent to what you have asked.
    cheers
    ajay

  • Differences between Product Version SAP ERP 2005 and SAP ECC 6.0

    Hello Guys,
    I have to setup an new XI interface between two R/3 system. During Integration Scenario setup you have to select under Application Component Type the Product version for the R/3 systems.
    Now, i am able to select SAP ERP 2005 or SAP ECC 6.0 from menu
    Could someone tell me the differences between SAP ERP 2005 and SAP ECC 6.0. Both are listed as Product Versions.
    Thanks in advance!
    Jochen

    SAP ECC 6.0 is latest version 2005 is last year version . as you are intergatin between 2 . you need select accordingly our source and target.
    let me know you still require any doubt
    Thanks
    Sreeram
    Message was edited by:
            Sreeram Reddy

  • ERP 2005 Upgrade

    Has anyone upgraded to ERP 2005 that is using the SPL for document splitting but you have not implemented the new GL yet?
    We are testing for our ERP 2005 upgrade and our document splitting rules are not working correctly anymore.  OSS says that changes were made in document splitting for the "new GL" but we are not using the new GL yet.  We need document splitting to work like it did before the upgrade but we don't know which config settings to change.

    Hi Ian,
    I came through your solution when I was looking for the similar kind of problem. Here is my question. If have not selected the 'Select for transport' button after modifcations and before continuing with ACT_700 phase, can I select this button after I complete the upgrade on the DEV and before continuing with QAS? Would the upgrade still consider the SPAU adjustments to be included automatically in the QAS? If not, what is the alternative to move these transports manually?
    My other question is, you have mentioned not to add SPDD transports to make it automatic. So, how else the SPDD modifications can be moved to QAS?
    Your response ASAP is highly appreciated.
    Thank you.

  • BAPI_ SALESORDER_CHANGE in MY SAP ERP 2005- Issues

    Hi Gurus,
    We are trying to change a Sales order using the  BAPI : BAPI_ SALESORDER_CHANGE in a Zprogram .
    The program  works fine in SAP 4.5B version. But in MY SAP ERP 2005,<b> we get error with the BAPI.</b>
    <u>Scenario :</u> The BAPI is working when the Purchase Order number is not maintained in the Sales Order.
    It throws the Error "purchase order number in document number already exist" when the Purchase order number is there in the Sales Oder.
    We executed the BAPI from SE37 by passing the parameters in the program and we got the same error mentioned above. Could you please guide .
    Thanks in Advance,
    S.Roseline

    Applied an SAP note for the BAPI BAPI_SALESORDER_CHANGE.

  • IDES and other Clients in one SAP ERP 2005 System

    Hello everybody,
    within a project for my master thesis i have to set up an SAP ERP 2005 System. This system should contain at least three clients. One of them should be the IDES client. Another client should be set up with an existing template. The third client should represent a smal company or at least i should set up some example process from the company (there is no need to map the whole company in the system). These processes should be realized with the SAP standard processes and they should just show how to map easy processes to SAP ERP. Neither the second nor the third client need to run in a productive environment, everything is just for training and testing.
    My main Questions are:
    I've already set up the SAP ERP 2005 System but without IDES. Can I still integrate the IDES Content or do i have to reinstall the whole System with a complete IDES Installation?
    Can I implement the second and third client in the same ERP System (where the IDES client is) or do i need different Systems for it? Even if there is no productive use for the clients we would like to have a Development and a Quality Landscape. Is this possible with the IDES client? Actually I have two fast machines for this purpose - one for quality and one for development.
    I would be very grateful for any hints.
    Thanks a lot.
    Regards,
    Martin

    Hi,
    You can use SAP IDES as Dev and Quailty.There is no diffrence in full sap or IDES .In IDES we have some pree configure Clients and full Ecc we have three client 000,001 and 066.
    So you can use SAP IDES as DEV.
    Your Question :I've already set up the SAP ERP 2005 System but without IDES. Can I still integrate the IDES Content or do i have to reinstall the whole System with a complete IDES Installation?
    Ans : you install diffrent mechine.We do't use any content.Do reinstall
    Thanks
    Pankaj Kalsayan

Maybe you are looking for