Upgrade of Server 2008 R2 ADMX's to Server 2012/Windows 8 ADMX's - Central Store

Hi
I am looking to upgrade our AD Group Policy centralised store of ADMX files from 2008 R2 to 2012/Windows 8 ADMX files.
I understand the correct procedure is to just overwrite the old files with the newer files, with the caveat that you MAY not be able to edit the GPO's now from a 2008 R2 server.
However I can find no clear defined statement that says this procedure will not corrupt/adjust existing GPO's, this would be 2008 R2 and 2003 level GPO's? 
From what I gather, when you open a GPO after the ADMX upgrade, the schema of the GPO file will update to include the existing settings, but will it alter existing settings in any way?
Any feedback will be much appreciated.
Kind Regards
Steven

> However I can find no clear defined statement that says this procedure
> will not corrupt/adjust existing GPO's, this would be 2008 R2 and 2003
> level GPO's?
It will not corrupt/adjust anything.
> will it alter existing settings in any way?
No.
ADMX only defines the GUI you see in gpedit. It does not change existing
content (registry.pol) unless you change something.
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

Similar Messages

  • Server 2012 X64 R2 DNS Server keeps shutting down after inplace upgrade from Server 2012 X64

    Hi,
    ever since upgrading from Server 2012 X64 to Server 2012 R2 X64 my dns server keeps shutting down every several minutes before having to do a restart.  When viewing the event log this is all I see..
    The DNS Server service terminated unexpectedly.  It has done this 497 time(s).  The following corrective action will be taken in 60000 milliseconds: Restart the service.
    if I look in the Application Error Log,  I will also find the following:
    Faulting application name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
    Faulting module name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
    Exception code: 0xc0000005
    Fault offset: 0x000000000010b0e0
    Faulting process id: 0x1740
    Faulting application start time: 0x01cf531b2e3a7f5e
    Faulting application path: C:\Windows\system32\dns.exe
    Faulting module path: C:\Windows\system32\dns.exe
    Report Id: 90a4ab37-bf0e-11e3-9446-003048df3f03
    Faulting package full name:
    Faulting package-relative application ID:
    I have tried removing and then reinstalling the DNS Server role, but the same situation occurs..
    thanks,

    Hi,
    I'm going crazy,  I've upgraded my Server 2012 Standard to Server 2012 R2 Standard and now my DNS server keeps crashing since the in place upgrade.  I have finally narrowed it down to it only crashes after several minutes if I load the data from
    a file instead of the registry.  As a test I:
    -1- killed all my dns data,
    -2- uninstalled the dns server role
    -3- deleted the /windows/system32/dns directory
    -4- reinstalled the DNS server role
    -5- used the wizard to create a DNS server and a forward zone.
    everything works okay, no crashes,  then I change the advanced propertied of the DNS server to load from file, restart the DNS server and once again it crashes every 2 minutes..
    Please help,  this is killing me..
    thanks in advance..

  • Upgrade to server 2012 standard

    Hello
    I am currently running Server 2012 Essentials and want to upgrade to Server 2012 Standard.
    I have downloaded the 2012 Standard trial ISO and would like to know where to from here? I have done a bit of reading about upgrading essentials 2012 whereby I understand one can do it from PS using a command. What I am not clear about is how I can get server
    2012 std onto the server to upgrade? Or is the PS command taking care of that in that it installs 2012 std onto the server?
    I had a look at this
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/8f966fcc-2afb-48f7-919b-6c61b71d7947/windows-server-2012-essentials-upgrade-to-windows-server-2012-standard?forum=winserveressentials
    and the last post is exactly what I too need to know.
    Can someone please advise what steps I need to take to get server 2012 std running?
    TIA

    Hi,
    Here is the detailed steps to transit from Windows Server 2012 Essentials to Windows Server 2012 Standard, you could refer to it to perform the transition. Hope it helps.
    Transition from Windows Server 2012 Essentials to Windows Server 2012 Standard
    http://technet.microsoft.com/en-us/library/jj247582.aspx
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

  • Can i upgrade Win Server 2012 Standard to Win Serevr 2012 R2

    1. Can i upgrade Win Server 2012 Standard to Win Server 2012 R2 ?
    2. Is it free of Cost, or do i need to pay ??
    3. can i upgrade without affecting working environment ?
    ----Tanu---

    1. Yes
    2. No it's not free you have to buy the upgrade, unless you are already paying for Software Assurance.
    3. Maybe. It depends upon the current implementation you have.
    https://technet.microsoft.com/en-au/library/dn303416.aspx
    https://technet.microsoft.com/en-us/windowsserver/dn527667.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • In-place upgrade from Server 2012 to Server 2012 R2

    I have a Dell PowerEdge 1850.  I installed Server 2012 Standard. This works fine.  I made it a domain controller in an existing domain.  I also added Print Management Role.  This was working fine.
    I then did an in-place upgrade to Server 2012 R2.  Now it is stuck in a rebooting loop.
    It says "Your PC needs to restart. Please hold down the power button.  Error Code: 0x000000C4.  Parameters: 0x0000000000000091, 0x00000000000000F, 0xFFFFF803827DCA00, 0x0000000000000000.
    I cannot get out of this loop.  Others have said they have this problem when installing with virtualization.  However, I am installing on the native hardware.  The CPU does not support hardware virtualization.
    This worked fine with Server 2012.  In fact, I have 4 other Domain Controllers that are identical to this one running Server 2012.  Did Server 2012 R2 add a CPU feature check that is hampering this?  
    Don Demars

    The 1850 is a pretty old box.  What you are running into sounds like the lack of a proper disk driver for the box (I've had that happen multiple times during new releases).  The disk driver needs to be provided by Dell.  I don't believe Dell
    supports the 1850 with 2012 R2, so getting a driver for it might be a bit of a challenge.  You can find which servers Dell supports under the different versions of Windows Server by checking out
    www.windowsservercatalog.com.
    Microsoft only puts supported device drivers submitted by the vendors well ahead of time on the distribution media.  Seeing that you were able to get 2012 running on the 1850s earlier, my guess is that you had separate media for the driver that you
    used during the installation.  There is a place during the installation that allows the loading of device drivers that are not on the installation media.  If you can get Dell to give you a driver for 2012 R2 for the 1850s, maybe you can update the
    driver under 2012 and then update the OS.
    Personally, though, I never upgrade a domain controller in place.  It is so easy to simply create a new one and add it to the domain.  Then, if you do have a driver for 2012 R2, you can load it during the clean installation.
    . : | : . : | : . tim

  • Report Viewer error in Windows Server 2012 & Windows Sever 2012 R2

    Hi,
    I have created an application with .net & C#. I have used Report viewer 2008 for generating report. Now I am trying to use this application on Windows Server 2012 & Windows Server 2012 R2. But I am getting the error related to assembly not getting
    loaded.
    I am clueless why this is happening.The same application is working fine in Windows server 2008 R2. The error which I am getting is:-
    Please help me with this and suggest me how to resolve above error and any workaround for this.
    Thanks for help.

    Hi
    Vishwajeet (MCA,MCP,MCTS,MCITP),
    Like your title mentioned, your case related to Report Viewer, For case related to
    Report Viewer should be posted in
     Other Forums> Visual Studio Report Controls
    forum. That describers:
    Discuss reporting functionality including the integrated report designer and viewer controls for adding rich data reports to Windows Forms and ASP.NET applications.
    Visual C# forum is Discuss and ask questions about the C# programming language, IDE, libraries, samples, and tools.
    Now I will move your thread to Visual Studio Report Controls forum for better support.
    Best regards,
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Steps to upgrade from sql 2008 r2 se (nonclustered) to sql 2012 se (clustered)

    hello,
    I am currently running a non clustered instance of a sqlserver 2008 R2 SE and need to upgrade to a clustered instance of SQLServer 2012 SE. The underlying OS is Windows 2008 R2 SE. I already bought the second server with the same os online but havent installed
    sql 2012 yet. 
    I am thinking of backing up my databases and script out all the logins and linked servers first.
    Then upgrade the SQLServer 2008 R2 SE to 2012 SE. But can I upgrade it to a clustered instance directly? If yes then I can definitely add the other server to the cluster while installing sql.
    Can someone point me to the right steps for this upgrade process
    Thanks

    Hello,
    Direct  upgrade to cluster is not possible without installing SQL server in cluster aware mode. I would recommend you need to uninstall SQL server 2008 R2 and then create windows cluster between two nodes and then install SQL server in cluster aware
    mode.
    You are right with taking up complete backup of all databases with logins and jobs.
    Please refer below link there is an alternate solution
    How to move SQL server from standalone to cluster
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
    My TechNet Wiki Articles

  • In-place upgrade from Server 2012 to 2012R2 "just quits"

    I have a TechNet subscription and am supposed to get "priority support" but I mistakenly asked my question in one of the forums that is not in the "priority support monitored" list. Included here by reference:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbbb34f2-e098-4f7d-b692-88e033869385/windows-server-2012r2-inplace-upgrade-from-2012-quotjust-quitsquot?forum=winserver2012r2previewsetup
    Short description: On the 2012 DataCenter machine which serves as my Hyper-V host, I mount the install media and launch Setup. It starts, copies the temporary files ($windows.~bt) and then just quits.
    Content of c:\windows\setupact.log:
    2013-10-11 10:29:04, Info                  UI     Determining whether we should run ConX or legacy setup
    2013-10-11 10:29:04, Info                  UI     Downlevel OS is server. Continue to run legacy setup
    2013-10-11 10:29:04, Info                  UI     Determining if we are in WDS/Unattend mode
    2013-10-11 10:29:04, Info                  UI     No need to hide autorun
    2013-10-11 10:29:04, Info       [0x0a000a] UI     Autorun:Autorun core successfully  initialized!!!
    2013-10-11 10:29:04, Info       [0x0a000b] UI     Autorun:Autorun UI successfully  initialized!!!
    2013-10-11 10:29:04, Info                  UI     AppWindow has layout style 0
    2013-10-11 10:29:04, Info                  UI     NavWindow has layout style 0
    2013-10-11 10:29:04, Warning    [0x0a0180] UI     Failed to change the UI language to en-US.
    2013-10-11 10:29:04, Info       [0x0a011c] UI     WizardDialogPost::SetActive
    2013-10-11 10:29:09, Info       [0x0a018e] UI     Passing command line parameter ("H:\Sources\setup.exe /HideWelcome /uilanguage:en-US /targetlanguage:en-US") to IBS.
    Would appreciate any suggestions that don't involve doing a detailed documentation capture of how the server is configured followed by a clean install, that is what I'm trying to avoid if possible.
    I am not trying to do anything special or scripted, just a standard OS upgrade.

    Hi Pepper, Malort, Robert and Brandon,
    I am experiencing the same issue using either new release (april 2014) or the gold release 2012 R2 DVD from Volume license (SA) download. Both confirmed working on other installations. Setup just suddenly quits with the same non existent logs
    files in $windows.~bt and c:\windows\setupact.log has a warning statement "Failed to change the UI language to en-US"
    The server is running as a vm and would otherwise appear to be running perfectly. It is a DC(GC), DHCP, DNS & CA for my site.
    Going to try System Update readiness Tool KB947821-v33.
    Heads up MSFP Anne, any word on the cause and/or fix?
    Regards,
    Andre
    Same here,
    trying to upgrade a server 2008 R2 server running on hyper-v to server 2012 R2 with update1.
    The server was a server 2008 and was upgraded to server 2008 R2.
    This is the only log i can found:
     2014-07-04 14:20:13, Info                  UI     Determining whether we should run ConX or legacy setup
    2014-07-04 14:20:13, Info                  UI     Downlevel OS is server. Continue to run legacy setup
    2014-07-04 14:20:13, Info                  UI     Determining if we are in WDS/Unattend mode
    2014-07-04 14:20:14, Info                  UI     No need to hide autorun
    2014-07-04 14:20:14, Info       [0x0a000a] UI     Autorun:Autorun core successfully  initialized!!!
    2014-07-04 14:20:14, Info       [0x0a000b] UI     Autorun:Autorun UI successfully  initialized!!!
    2014-07-04 14:20:14, Warning               UI     CLanguages::v_InitLanguage - Failed to load en-US resources with error 2. Will load fallback binaries
    2014-07-04 14:20:15, Info                  UI     AppWindow has layout style 0
    2014-07-04 14:20:15, Info                  UI     NavWindow has layout style 0
    2014-07-04 14:20:15, Warning    [0x0a0180] UI     Failed to change the UI language to nl-NL.
    2014-07-04 14:20:15, Warning               UI     CLanguages::v_InitLanguage - Failed to load en-US resources with error 2. Will load fallback binaries
    2014-07-04 14:20:15, Info       [0x0a011c] UI     WizardDialogPost::SetActive
    2014-07-04 14:20:16, Info       [0x0a018e] UI     Passing command line parameter ("D:\Sources\setup.exe /HideWelcome /uilanguage:nl-NL /targetlanguage:nl-NL") to IBS.
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 18 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 18 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 18 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 18 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0

  • In-place upgrade from Server 2012 to 2012R2 is failing

    Hello,
    I'm trying tu upgrade a VM from Windows server 2012 to Windows Server 2012 R2, but the upgrade is failing with an error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation.
    Error code 0x80070522"
    The VM i'm trying to upgrade has SQL server 2012 and some related tools installed
    The VM is running on a Windows server 2012 Hyper-V host
    I have tried a few different installation media, downloaden from the MS licensing site and from MSDN, but all give the same problem.
    After searching for logs i found these relevant messages in C:\$WINDOWS.~BT\Sources\Panther\setuperr.log
    2014-07-15 11:25:10, Error      [0x0803b6] MIG    Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:25:10, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] Failed to get launcher layout, hr=0x80070002
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    // a lot of these kind of messages
    2014-07-15 11:27:55, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:27:55, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:28:24, Error      [0x0808fe] MIG    Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:28:32, Error      [0x0803b6] MIG    Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:28:32, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:28:43, Error      [0x0803b6] MIG    Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:28:43, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:31:35, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
    2014-07-15 11:33:25, Error      [0x0808fe] MIG    Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
    2014-07-15 11:33:25, Error      [0x0808fe] MIG    Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
    2014-07-15 11:33:28, Error      [0x0606cc] IBS    WIMApplyImage failed; hr = 0x80070522[gle=0x00000522]
    2014-07-15 11:33:28, Error      [0x0600a1] IBS    DeployImage:Image application failed; hr = 0x80070522[gle=0x00000057]
    2014-07-15 11:33:28, Error      [0x060082] IBS    Callback_ImageTransfer:Failed to lay down the WinPE image; hr = 0x80070522[gle=0x00000057]
    2014-07-15 11:41:11, Error      [0x0606cc] IBS    WIMApplyImage failed; hr = 0x80070522[gle=0x00000522]
    2014-07-15 11:41:11, Error      [0x0600a1] IBS    DeployImage:Image application failed; hr = 0x80070522[gle=0x00000057]
    2014-07-15 11:41:11, Error      [0x060082] IBS    Callback_ImageTransfer:Failed to lay down the OS image; hr = 0x80070522[gle=0x00000057]
    Can anyone help me with this issue?
    Regards,
    Tom

    Yes, domain admins are members of the local administrator group when the macine is joined to a domain, but the opposite is not true.  Local admins are not necessarily members of the domain admins group.
    . : | : . : | : . tim
    Tim,
    Yes i Understand that a local administrator is not always a domain administrator, but i think this has nothing to do with my problem.
    To be sure i have logged in to this server with the local administrator user and started the upgrade again. As expected I got the same error message, so this is nog a permissions problem.
    Can somebody who can help me to solve this probleem?
    Regards,
    Tom

  • Upgrade to Server 2012 Standard (user limit fix) - Not Supported?

    Which WD Sentinel do you have? The process is only supported and applies to the WD Sentinel DS5100 and DS6100 since they have different hardware than the DX and RX series.

    There aren't any huge differences in the operating system when going from Server 2012 R2 Essentials to Server 2012 R2 Standard. The biggest peice is that users need to purchase the correct licencing before making the swap. Western Digital appears to have created a video to assist users with the transitions from the stock operating system to Server 2012 Standard. (Upgrade DS6100 to Server 2012 Standard) The upgrade process itself based on the video and mention of the upgrade in the administrator's/owners manual gives the appearance that such an upgrade is endorsed/supported by WD. Appearances, however, can be deceiving. Midway through the process I ran into a problem (Raid Config Problem) and attempted to contact customer support over the phone. After being elevated up to a second level of support I was told over the phone that because I had made changes to my unit that it was no longer in its original confiuration, I had voided my warranty, and I am on my own until I restore the unit to its original configuration. I mentioned to the tech that I don't think I did anything outside the bounds of what I should be doing based on the video (link above) and the following exerpt from the administrator's manual: "Windows Server 2012 R2 Essentials supports up to 25 users and 50 devices. When your business needs exceed the limit, you can purchase an additional license and upgrade to Windows Server 2012 R2 Standard." The response I received was fairly surprising to say the least. I was directed to page 80 GPU/GPL section: "Modification of or tampering with the Software, including but not limited to any Open Source Software, is solely at your own risk. Western Digital is not responsible for any such modification or tampering. Western Digital will not support any product in which you have or have attempted to modify the Software supplied by Western Digital." In my specific case, I knew what the issue was and more specifically, I knew exactly what I needed to resolve the issue (the installation binaries for the Raid Configuration Utility). The tech on the phone said that since I had modified the OS, that I needed to reach out to Microsoft for assistance (which makes no sense since the software in question is Western Digital's) and refused to provide me with any information on how I might obtain the installation software. Ultimately I resolved the issue on my own by pure happenstance. I encourage anyone even thinking about buying one of these units for a medium to large business to be very leery and way your options carefully. I'd be happy to provide my case # to anyone at WD who would like to contact me and/or look at the particulars of my problem.

  • Server 2012 Std (dutch) upgrade to Server 2012 R2 Std (dutch)

    Hi,
    I have several 'Server 2012 Standard' (volume licenced) servers installed within the Dutch language, and would like to upgrade them to R2.
    I downloaded the R2 eval version (EN, can't find any Dutch version) and tried to upgrade the server.
    While upgrading the server I get the following error:
     Compability report; You can't do a typical upgrade using an installation disc that's different from the language installed on your computer. Go to .....LinkId=142337 to see how ito install Windows and keep uour files and settings.
    So I installed the EN / US  languagepack, rebooted the server and gave it another go but the same error pops up.
    How do I upgrade a Dutch server to R2?  According to a similar question, it should be migrated?
    Thanks,
    Jurgen.

    Hi Jurgen,
    I'm afraid it is a not supported senario for in-place upgrade :
    "In-place upgrades from one language to another are not supported."
    http://technet.microsoft.com/en-us/library/dn303416.aspx
    Best Regards
    Elton JI
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Inline upgrade from server 2012 to server 2012r2

    just wanted to see peoples experience for upgrading server 2012 to server 2012r2 on an inline upgrade?  is this ok to do or a reimage is best?
    thanks

    Hi iworkhere,
    I have a Windows Server 2012 DC and a Windows 2012 member server in my lab environment. I have upgraded them to Windows Server 2012 R2 with no issue. After upgrading, you will
    have a Windows.old folder under C:\ and as there is no disk cleanup tool in Windows Server versions without the Desktop Experience feature, you may have to delete it manually if needed.
    In addition, if no data needs to be kept in Windows Server 2012, you can choose either a clean installation or a upgrading. Personally, I prefer the clean installation.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • Upgrade from server 2012 to server 2012 R2

    Hi, my question is about the price,
    I have a windows Server 2012 up and running and want to upgrade it to server 2012 R2. Is this operation Free or I should purchase another license for upgraded windows?
    Thanks,

    These are 2 different versions, you need have license.
    Upgrade means
    moving from your existing operating system release to a more recent release, while staying on the same hardware. For example, if your server is running Windows Server 2012, you can upgrade it to Windows Server 2012 R2. You can upgrade from an evaluation version
    of the operating system to a retail version, from an older retail version to a newer version, or, in some cases, from a volume-licensed edition of the operating system to an ordinary retail edition.
    Ref : http://technet.microsoft.com/en-us/library/dn303416.aspx
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Upgrade to Server 2012 R2 domain controllers from 2003

    I am at a loss as to what I did wrong here. Everything seems to be working fine except for one subnet (which is behind a hardware firewall).
    We had two Server 2003 domain controllers and one of them was failing.  I raised the forest functional level of our old primary domain controllers to 2003.  I built the first replacement Server 2012 R2 domain controller.  Added the AD DS roles
    and promoted it as a domain controller.  I let it sit for a couple days.  The FSMO roles were currently being handled by our other 2003 domain controller.  Once this had been sitting for a while (don't recall how long) I ran dcpromo on the failing
    server and demoted it.  Once demoted I shut it down and pulled it out of the rack.  I then built our second 2012 R2 server and gave it the same IP as the failing one.  Installed the AD DS roles and integrated DNS as prompted by the wizard. 
    I then made it the operations master for Schema master, Domain naming master, PDC, RID pool manager, and Infrastructure master.  Then I ran dcpromo on the second 2003 domain controller to demote it and removed it from the network.  I then demoted
    the first new controller (DC03) changed the hostname and IP to the name and IP of the second 2003 controller and promoted it again.  I'm not sure at what point things broke, but everything works from the same subnet that the domain controllers are in,
    just not a second subnet that is through a hardware firewall.  I don't see anything getting blocked while watching firewall logs so I don't think the firewall is the issue.
    Here is the dcdiag and ipconfig from the first controller (which has all 5 FSMO roles).
    Microsoft Windows [Version 6.3.9600]
    (c) 2013 Microsoft Corporation. All rights reserved.
    C:\Users\username>dcdiag /v /test:dns
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       * Verifying that the local machine WGDDC01, is a Directory Server.
       Home Server = WGDDC01
       * Connecting to directory service on server WGDDC01.
       * Identified AD Forest.
       Collecting AD specific global data
       * Collecting site info.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=wgd,DC=inet,LD
    AP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
       The previous call succeeded
       Iterating through the sites
       Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name
    ,CN=Sites,CN=Configuration,DC=wgd,DC=inet
       Getting ISTG and options for the site
       * Identifying all servers.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=wgd,DC=inet,LD
    AP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
       The previous call succeeded....
       The previous call succeeded
       Iterating through the list of servers
       Getting information for the server CN=NTDS Settings,CN=WGDDC01,CN=Servers,CN=
    Default-First-Site-Name,CN=Sites,CN=Configuration,DC=wgd,DC=inet
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=WGDDC02,CN=Servers,CN=
    Default-First-Site-Name,CN=Sites,CN=Configuration,DC=wgd,DC=inet
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       * Identifying all NC cross-refs.
       * Found 2 DC(s). Testing 1 of them.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\WGDDC01
          Starting test: Connectivity
             * Active Directory LDAP Services Check
             Determining IP4 connectivity
             * Active Directory RPC Services Check
             ......................... WGDDC01 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\WGDDC01
          Test omitted by user request: Advertising
          Test omitted by user request: CheckSecurityError
          Test omitted by user request: CutoffServers
          Test omitted by user request: FrsEvent
          Test omitted by user request: DFSREvent
          Test omitted by user request: SysVolCheck
          Test omitted by user request: KccEvent
          Test omitted by user request: KnowsOfRoleHolders
          Test omitted by user request: MachineAccount
          Test omitted by user request: NCSecDesc
          Test omitted by user request: NetLogons
          Test omitted by user request: ObjectsReplicated
          Test omitted by user request: OutboundSecureChannels
          Test omitted by user request: Replications
          Test omitted by user request: RidManager
          Test omitted by user request: Services
          Test omitted by user request: SystemLog
          Test omitted by user request: Topology
          Test omitted by user request: VerifyEnterpriseReferences
          Test omitted by user request: VerifyReferences
          Test omitted by user request: VerifyReplicas
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             See DNS test in enterprise tests section for results
             ......................... WGDDC01 failed test DNS
       Running partition tests on : DomainDnsZones
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running partition tests on : ForestDnsZones
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running partition tests on : Schema
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running partition tests on : Configuration
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running partition tests on : wgd
          Test omitted by user request: CheckSDRefDom
          Test omitted by user request: CrossRefValidation
       Running enterprise tests on : wgd.inet
          Starting test: DNS
             Test results for domain controllers:
                DC: WGDDC01.wgd.inet
                Domain: wgd.inet
                   TEST: Authentication (Auth)
                      Authentication test: Successfully completed
                   TEST: Basic (Basc)
                      The OS
                      Microsoft Windows Server 2012 R2 Standard (Service Pack level:
     0.0)
                      is supported.
                      NETLOGON service is running
                      kdc service is running
                      DNSCACHE service is running
                      DNS service is running
                      DC is a DNS server
                      Network adapters information:
                      Adapter [00000010] Broadcom NetXtreme Gigabit Ethernet:
                         MAC address is B0:83:FE:C1:98:07
                         IP Address is static
                         IP address: 10.240.1.23
                         DNS servers:
                            10.240.1.23 (WGDDC01) [Valid]
                            10.240.1.24 (WGDDC02) [Valid]
                            127.0.0.1 (WGDDC01) [Valid]
                      The A host record(s) for this DC was found
                      The SOA record for the Active Directory zone was found
                      Warning: no DNS RPC connectivity (error or non Microsoft DNS s
    erver is running)
                      [Error details: 5 (Type: Win32 - Description: Access is denied
             Summary of test results for DNS servers used by the above domain
             controllers:
                DNS server: 10.240.1.23 (WGDDC01)
                   All tests passed on this DNS server
                   Name resolution is functional._ldap._tcp SRV record for the fores
    t root domain is registered
                DNS server: 10.240.1.24 (WGDDC02)
                   All tests passed on this DNS server
                   Name resolution is functional._ldap._tcp SRV record for the fores
    t root domain is registered
             Summary of DNS test results:
    Auth Basc Forw Del  Dyn  RReg Ext
                Domain: wgd.inet
                   WGDDC01                      PASS WARN n/a  n/a  n/a 
    n/a  n/a
             ......................... wgd.inet passed test DNS
          Test omitted by user request: LocatorCheck
          Test omitted by user request: Intersite
    C:\Users\dsmythe>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : WGDDC01
       Primary Dns Suffix  . . . . . . . : wgd.inet
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : wgd.inet
    Ethernet adapter WGD_INET:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
       Physical Address. . . . . . . . . : B0-83-FE-C1-98-07
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 10.240.1.23(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.240.1.1
       DNS Servers . . . . . . . . . . . : 10.240.1.23
                                           10.240.1.24
                                           127.0.0.1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{2C28B0FA-6BF8-4201-A6DA-081AED63B496}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    When I try to bind a machine to the domain I get an error message that says "
    The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "wgd.inet":
    The error was: "This operation returned because the timeout period expired."
    (error code 0x000005B4 ERROR_TIMEOUT)
    The query was for the SRV record for _ldap._tcp.dc._msdcs.wgd.inet
    The DNS servers used by this computer for name resolution are not responding. This computer is configured to use DNS servers with the following IP addresses:
    10.240.1.24
    10.240.1.23
    Verify that this computer is connected to the network, that these are the correct DNS server IP addresses, and that at least one of the DNS servers is running.
    Please let me know if I'm missing something or if there are other things I can check.
    Thanks!
    I forgot to mention that after the 2003 domain controllers were out of the environment, I raised the domain and forest functional level to 2012 R2.  All clients in the environment are Windows XP Pro or above.  The XP Pro boxes will be going away as
    soon as our vendor supports their software to run on Windows 7.

    We now have 2 2012 R2 DCs. The 2003 DCs are gone. Metadata from the old DCs is all cleaned up. DNS seems to be working fine in 3 out of 4 subnets. The 4th is behind a hardware firewall and I can see the IP address of the machine I am trying to bind to the
    domain connecting to the two new domain controllers but the client machine that is trying to bind gives an error.  An Active Directory Domain Controller for the domain wgd.inet could not be contacted.  It seems that this is just a DNS issue for one
    particular subnet (10.240.2.0/24).  This subnet is setup in AD Sites and Services\Sites\Subnets\10.240.2.0/24 (Site: Default-First-Site-Name).
    When trying to do anything with nslookup from the 10.240.2.0/24 subnet it times out.  The route is there and I can watch it connect through our hardware firewall over port 53.
    DC01
    Microsoft Windows [Version 6.3.9600]
    (c) 2013 Microsoft Corporation. All rights reserved.
    C:\Users\dsmythe>netdom query fsmo
    Schema master               WGDDC01.wgd.inet
    Domain naming master        WGDDC01.wgd.inet
    PDC                         WGDDC01.wgd.inet
    RID pool manager            WGDDC01.wgd.inet
    Infrastructure master       WGDDC01.wgd.inet
    The command completed successfully.
    C:\Users\dsmythe>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : WGDDC01
       Primary Dns Suffix  . . . . . . . : wgd.inet
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : wgd.inet
    Ethernet adapter WGD_INET:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
       Physical Address. . . . . . . . . : B0-83-FE-C1-98-07
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 10.240.1.23(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.240.1.1
       DNS Servers . . . . . . . . . . . : 10.240.1.23
                                           10.240.1.24
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{2C28B0FA-6BF8-4201-A6DA-081AED63B496}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    C:\Users\dsmythe>
    DC02
    Microsoft Windows [Version 6.3.9600]
    (c) 2013 Microsoft Corporation. All rights reserved.
    C:\Users\dsmythe>netdom query fsmo
    Schema master               WGDDC01.wgd.inet
    Domain naming master        WGDDC01.wgd.inet
    PDC                         WGDDC01.wgd.inet
    RID pool manager            WGDDC01.wgd.inet
    Infrastructure master       WGDDC01.wgd.inet
    The command completed successfully.
    C:\Users\dsmythe>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : WGDDC02
       Primary Dns Suffix  . . . . . . . : wgd.inet
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : wgd.inet
    Ethernet adapter NIC1:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
       Physical Address. . . . . . . . . : B0-83-FE-C1-9F-74
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 10.240.1.24(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.240.1.1
       DNS Servers . . . . . . . . . . . : 10.240.1.24
                                           10.240.1.23
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{4F45E51E-FC2F-49ED-85CF-0750A9EEECF5}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    C:\Users\dsmythe>

  • How to upgrade SQL Server 2012 SSMS

    I have SQL Server 2012 SSMS (11.0.3000.0) on my machine, however this crashes at least 5-8 times a day. So I want to try to apply KB2874879. But when I try to install it I can't progress because it says there is no instance found to apply. I only want
    to update the SSMS, I'm not running any local instance on that machine. How can I get SSMS to the latest version ?

    Hi,
    According to your description, I know the SQL Server Management Studio always crashes on the client machine and there is no SQL Server was installed on that machine.
    KB2874879 is cumulative update package 6 for Microsoft SQL Server 2012 Service Pack 1 and it should be installed on SQL Server. And install CU6 does not guarantee it will resolve the SQL Server Management Studio crash issue on the client machine. If the
    SQL Server Management Studio is corrupted, you need to perform a repair installation from the Installation Center.
    Thanks.
    Tracy Cai
    TechNet Community Support

Maybe you are looking for

  • Check and Verify USMT IMG file before formatting the system

    Hi Team, We are using 2 phase approach for migrating from XP to windows 8.1 U1 since we have Config manager 2012 R2. Its a refresh, replace and baremetal scneario So 1st TS will just do user state backup using ADK8.0 USMT and backup the data on SMP.

  • N:1 file merging scenario in bpm

    Hi friends, Can anybody send me link of blog for file merging scenario in BPM. i hav two files and i hav to merge it into one single file. I am new to XI, plz help me. Thanks in advance, Shweta

  • How to resolve many fact tables and Dimensions tables

    Hi, The scenario is we have many facts and dimension tables. Based on some conditions one measure from one fact will be divided by another fact measure. I have encoutered with many errors like " Unable to navigate .... " ? How to resolve these errors

  • Display image from cfgrid click

    Hi, I have a cfgrid that has a path to an image that was uploaded from the page. <cfform format="html"> <cfgrid query="gettradition" name="submissions" notsupported="" height="600" format="applet" target="_blank" highlighthref="yes" width="1000"> <cf

  • ITunes Store / Apple ID Server Down ... Yet ALL Green Lights???

    I suppose this isn't a question. Just a friendly reminder that just because you choose to leave the lights green doesn't mean your services are working or that your customers are satisfied.