Upgrade of xen guest to oes 11 sp 1 error

I have been using the installation documentation to upgrade an existing oes2 sp2 server to oes 11 sp 1. I have established an NFS share on the xen host server and have tested that i can mount the nfs share to another server. That is done correctly.
I shutdown the vm and select create new virtual machine in the virt mngr. I then select the oes 11 type and then select that i want to upgrade an existing vm. I enter the path as nfs:\\ipaddress\nds directory\ . When I select to upgrade I receive an error that says the source is unusable. the source is an iso file on the nfs share.
Any suggestions.

jmcg wrote:
>
> I have been using the installation documentation to upgrade an
> existing oes2 sp2 server to oes 11 sp 1. I have established an NFS
> share on the xen host server and have tested that i can mount the nfs
> share to another server. That is done correctly.
This is the document?
OES 11 SP1: Installation Guide > Installing, Upgrading, or Updating OES
on a VM
https://www.novell.com/documentation...a/b9kmg9x.html
>
> I shutdown the vm and select create new virtual machine in the virt
> mngr. I then select the oes 11 type and then select that i want to
> upgrade an existing vm.
What media are you using? If you are using
OES11-SP1-addon_with_SLES11-SP2-x86_64-DVD.iso you should be able to
supply the .iso image when you create your new virtual machine. This is
probably the easiest approach.
If you are using SLES-11-SP2-DVD-x86_64-GM-DVD1.iso and the separate
OES11-SP1-addon-x86_64-CD1.iso, you start with the SLES DVD and specify
that you also want to install OES as an addon. The OES media has to be
accessible on the network. I prefer to create an Installation Server on
my Dom0 and advertise it using SLP. Each to his own...
> I enter the path as nfs:\\ipaddress\nds
> directory\ . When I select to upgrade I receive an error that says
> the source is unusable. the source is an iso file on the nfs share.
>
> Any suggestions.
The first thing that comes to mind is that your DomU needs an IP
address to access the media. If you don't have a DHCP server to provide
one, that could be your problem although there are workarounds.
Kevin Boyle - Knowledge Partner
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

Similar Messages

  • My iphone 4 when you upgrade the firmware on ios7.0.2 produced an error 3194

    my iphone 4 when you upgrade the firmware on ios7.0.2 produced an error 3194 ... now my phone is not working ... every time an error 3194 ... I can not update ios and drop naturally I do not Pogue. hosts cleaned, cut off the antivirus ... did everything I recommend in this case ((what do I do? (
    on other machines the same ...

    Some additional suggestions here that may help if you haven't tried them:
    http://support.apple.com/kb/ts4451
    Regards.

  • I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

    I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
    Thanks for your help in advance....

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • I upgraded iTunes to 11.  I now receive an error message which reads - 'The iTunes Library file cannot be saved. An unknown error occurred (-50).  How do I correct this error?

    I upgraded iTunes to 11.  I now receive an error message which reads - 'The iTunes Library file cannot be saved. An unknown error occurred (-50).  How do I correct this error?
    Thanks
    TDB

    I know this doesn't help you Bud, but I've had this issue for at least the last couple of versions.  If I can ask, what is you enviornment like?  Local PC only, libray saved on another PC/Server? 
    In my case my library is on Windows 2003 server with the share mapped to drive M:  This has worked for many years through both XP and Windows 7 until and update a while ago. 
    Thanks,
    Rob

  • I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue

    I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue

    Hi,
    Try here:  http://support.apple.com/kb/HT1808. 
    Hope this helps! 
    ---likeabird---

  • Since upgrading to Firefox 4.0 I keep getting the error message "THERE WAS APROBLEM SENDING THE COMMAND TO THE PROGRAM", please can you advise how I get it to stop?

    I have just upgraded to Firefox 4.0 and ever since then I get this message when I try to go to either Yahoo or Gmail
    "THERE WAS A PROBLEM SENDING THE COMMAND TO THE PROGRAM",
    I had this problem a month or so ago so downgraded to Firefox 3.6 and the problem went away but have now been advised to upgrade which indeed I have and hey presto the error message again, please how can I fix it??

    OK, you seem to be running Zone Alarm as your firewall. It includes a utility which checks to see whether a site is safe or not and also adds a plugin to Firefox which is listed as '''npFFApi'''. Can you disable that and see if it makes any difference?
    To get to the plugins manager, click the orange Firefox button, then click "Add-ons". In the page that opens, click the "Plugins" link on the left which will open the menu. Then find '''npFFApi '''and click the "''Disable''" button.

  • I'm trying to upgrade to the latest iTunes, but keep getting an error message C:\config.msi\7db625.rbf

    Please help
    I'm trying to upgrade to the latest iTunes, but keep getting an error message C:\config.msi\7db625.rbf

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I can't upgrade to 10.6 on my PC-Windows Installer Error message

    I have a PC, Windows XP Pro, Service Pack 3. I am trying to upgrade to Itunes 10.6. I keep receiving Error Message, There is a problem with the
    Windows Installer,-A program run as part of the setup did not finish.  Any ideas!!!

    Repair your Apple software Update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU in All programs, go to control panel/
    XP- add n remove Programs/highlight ASU, CHANGE then REPAIR.
    Vista or Win7 - Programs n features/highlight ASU and click REPAIR.

  • When im trying to upgrade iphone4 os to 7 it was showing unknown error.error[9].can anyone help me on this??

    when I tried to upgrade my iphone4 to 7 version it was showing error "iphone cannt be restored.unknown error [9]".can anyone help me on this?

    http://support.apple.com/kb/ts3694
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • I was upgrading my iphone 3g to 4.2 and an error occured. please help

    I was upgrading my iphone 3g to 4.2 and an error occured. please help

    See this support document http://support.apple.com/kb/TS3694 and read about the 1015 error. Usually refers to jailbreaking, or attempts to install different firmware. Does this apply to you?

  • HT201210 When i am upgrading firmware to i0S 6 i am getting unknown error for iphone 4

    When i am upgrading firmware to i0S 6 i am getting unknown error for iphone 4

    Take a look at this link, http://support.apple.com/kb/ts1424

  • Since upgrading to ios 8.0.2, airprint will give error (no printer found" After a reboot, it locates and prints, then next time same error code. Any ideas?

    Since upgrading to ios 8.0.2, airprint will give error (no printer found" After a reboot, it locates and prints, then next time same error code. Any ideas?

    Hi bdtcop,
    I understand that you are experiencing an issue with AirPrint. Here is an article for you with some troubleshooting steps that may be helpful for resolving this issue:
    About AirPrint
    http://support.apple.com/kb/ht4356
    If you're unable to print
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • MSI gx 640 - pondering bios upgrade for XEN

    Aloha All,
    So I have been trying to get XEN running on my gx 640.  The issue seems to be the network adapter.  It almost works.  So I was wondering if I should update the bios.  Is that just foolish?  It seems the latest version is 1656 10e and I am running 10c.  Is there any info about what is updated/fixed in each version of the bios? 
    Once you download the files can you run the update from inside windows?  What happens if you try and run flash.bat? Or do you HAVE to run it from a flash drive in DOS?
    Mahalo.

    It says on the MSI website what the update fixes:
    "Disable UEFI boot for system hangs up if boot from CD/DVD with UEFI method."
    http://eu.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=135&prod_no=1998
    Can't say it would solve your issue so no point updating. By the way, if flashing the BIOS you must always >>use the MSI HQ Forum USB flasher<<. Flashing through Windows is a very bad idea.

  • I need to silently upgrade from 3.5 to 7 but get an error message after 7 install. Platform version 7.0 is not compatible with minVersion = 1.9.1

    I'm trying to silently upgrade my environment to FF 7. I've gotten the silent install working great, it puts in my Proxy Server info, reassigns the home page and all that. But, the last version we pushed out was FF 3.5. If a user had that on their PC and they run the FF7 install, they get weird messages when clicking on the icon.
    XULRunner: Error: Platform version '7.0' is not compatible with minVersion >= 1.9.1 maxVersion <=1.9.1
    Another message they get is:
    AutoConfigAlert:
    Netscape.cfg/AutoConfig failed. Error: pref failed: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.setBoolPref]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: prefcalls.js :: pref :: line 70" data: no]
    This is on Windows XP

    Do you have other virtualization or security software that might protect .ini and possibly other files in the Firefox program folder (C:\Program Files\Mozilla Firefox\) and prevent Firefox from updating them properly?
    You need to do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

    We recently upgraded from CF8 to CF9 Enterprise.  I'm getting an "Unable to create temporary file" error on
    my CFIMAGE resize calls.  We use sandbox security.  I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it?   The same code (and sandbox settings) ran fine in CF8....
    Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
    Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
    The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
    ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
    I need to restart CF to get everything working again.

    Another update.   Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable.  Got an "Unable to create temporary file" error.
    Inserted the following code in the file upload page:
    <cfscript>
    writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
    </cfscript>
    ... and it reveals the temp directory as C:\WINDOWS\TEMP.  Added that to the sandbox, and the CFIMAGE READ is working properly now.
    Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
    For reference, see the section "Sandbox Considerations" at this link:
    http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

Maybe you are looking for