Upgrade old iMac or buy New??

I have an early 2006 iMac (1.83 intel core duo), I am running leopard and upgraded my ram to 2GB a few years ago. I am running 2 external HD to hold my home movies, itunes. I updates iphones with OS5 and realized that I cannot run Lion on my Mac and will not be able to access iCloud. My question to you all is this: Should I explore options to further upgrade my Mac or just purchase a new one. If I purchase, what woudl you recommend? I am not a gamer, I use my mac for personal use and managing/editing our family photos and videos. I appreciate any advice you offer. The apple store has been so busy, it's hard to have a conversation about this. - Jamie P

You need to check to see if your machine can handle Lion, it needs 4GB to run well and a Intel Core 2 Duo or better.
Download the free MacTracker and see more specifics of everything.
http://mactracker.ca/
Next, you must realize that your Rosetta PPC based programs will not operate under Lion, likely you will have to buy all new programs.
If you machine is dated, a lot of the trackpad gesture features you won't have.
Check the source of all your third party sofftware and hardware drivers for scanners, all-in-one's and the like to make sure they work or there are updates, or upgrades available and how much.
http://roaringapps.com/apps:table
IDEALLY, it's best to backup files and then "fresh install" Snow Leopard clean, then upgrade to Lion.
Also you should make a option bootable clone of Snow Leopard on a external drive, this will allow you to return if something doesn't work.
You can learn all of this and more at my exhaustive post here, enjoy.
https://discussions.apple.com/message/16276201#16276201

Similar Messages

Safari bookmarks disappeared on old imac after buying new macbook

Hi, I am new to these forums. I have an issue with the bookmarks on safari and have not been able to find a solution thus far.
Basically what happened is; I had a lot of bookmarks on Safari on my 2008 iMac. A few months ago I purchased a macbook pro for college and have used my iMac little since. Today I booted up my iMac to find a website I was looking for from my old bookmarks but they were all gone - replaced with the new ones I had made on my macbook. I tried turning off Safari in the settings for iCloud but to no avail.
Does anyone know of another way I can get my bookmarks back?
Btw, I do not have time machine set up, unfortunately...

Is the backup a Time Machine backup or a cloned backup? If the latter, then locate the old /Home/Music/iTunes/ folder and copy it into the new /Home/Music/ folder. Answer "Yes" when asked if you want to replace a folder by the same name. Everything that was in the iTunes folder should transfer to the new machine including all the music tracks that were originally there. If you never put the tracks into the iTunes Library, then they would be elsewhere on the computer or not there at all.

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do?

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do? Can I find the original serial number in my old Imac?

You'll have to contact Apple. See Pro Application Replacement Serial Numbers

How do i transfer data from my old imac to my new imac?

I WANT TO BUY A NEW IMAC. HOW DO I TRANSFER MY DATA FROM MY OLD IMAC TO MY NEW ONE??

First please do not type in all caps, it is considered shouting and we can hear you just fine.
To migrage your data please carefully read Pondini's guide, it will supply everything you need. Just click Lion or Mountain Lion Setup Assistant tips

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M.

How can I restore files from my old iMac to this new purchased MacBook Air? I am using time machine backup in my old imac.

How can I restore files from my old iMac to this new purchased MacBook Air? I am using time machine backup in my old imac.

Hi,
Try Target Disk Mode
OS X Yosemite: Transfer files between two computers using target disk mode
There is also Migration Assistant.
OS X Yosemite: Transfer your info from a computer or storage device

I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

How do I transfer files from my old iMac to my new Pro laptop?

How do I transfer files from my old iMac to my new Pro laptop?

If you can get both computers on the Internet at the same time without re-cabling, you have the connection infrastructure needed to enable file sharing and share those files.
That said, many users find it easier to use FireWire Target Disk mode to treat the old computer as a big Hard drive, and just drag and drop the files, or use Migration Assistant or Setup Assistent.
There is a really good guide here:
http://pondini.org/OSX/Setup.html

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

After migrating a new Mac Book Pro from Time Capsule, I noticed that I lost a group of Favorites on the older iMac. The puzzling thing is that the Favorites are on my iPhone--not the old iMac or the new Mac Book Pro. How do I get the Favorites back?

After migrating a new Mac Book Pro from Time Capsule, I noticed that I lost a group of Favorites on the older iMac. The puzzling thing is that the Favorites are on my iPhone--not the old iMac or the new Mac Book Pro. How do I get the Favorites back?

If you are syncing using iCloud, try going to System Preferences/iCloud (computers) and checking Safari. If it is checked, try deselecting it, wait 10-15 seconds, and then check it again.

HT4889 I just set up my migration from my old iMac to the new one and it says it'll take 42 hours! What's up with this?

I just set up my migration from my old iMac to the new one via wifi and it says it'll take 42 hours! What's up with this?

blackeducator wrote:
... What's up with this?
Don't migrate wirelessly unless you have a very fast wireless connection. Anything other than 5 GHz 802.11n is likely to take an unacceptable amount of time.

What is the best way to transfer my date from my old iMac to my new iMac?

what is the best way to transfer my date from my old iMac to my new iMac? I don't have a time capsule, so I cannot use time machine.
thanks

Your best bet by far is to use Setup Assistant when the new Mac first starts up to transfer directly from the old one.
It's similar to Migration Assistant, but doing it that way will avoid having an extra user account.
Either way, you can connect them via FireWire, Thunderbolt, or your network, but avoid wireless if at all possible. You can connect both to your netwrork via Ethernet, or put a single cable between the two.
See Using Setup Assistant on Mountain Lion or Lion for details.

I have upgrade my iMac to the new OS X Maverick but now my computer is extremely slow and takes longer to open up everything. Has any one else had this issue?

Ihave just upgrade my imac to the new os x maverick and now its very slow to open everything.
Have any one else had these issues

MacKeeper is utter garbage!!!!
Before even attempting an OS X upgrade, completely remove this serious "crapware" from your system!!!!!
If you do not believe me, do a search in these support forums for MacKeeper and you can see for yourself!
Get rid of it!
See if your system speeds up after completely ridding your system of everything connected to MacKeeper.
Please, start a new thread and do not hijack a thread of another user posting!
Why are you so concerned about "cleaning out" your Mac?
How full is your Mac's hard drive?
How much RAM is installed in your Mac?
Download and install and run Etrecheck.
Copy and paste its information iinto a new posting so that we can see all the necessary details of your Mac system so we may begin to address your Mac issues.
http://www.etresoft.com/etrecheck
Good Luck!

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

I can't migrate files from my old imac to a new one.

I can't migrate files from my old imac to a new one. I'm using a firewire 800 to a thunderboldlt adapter, my new imac doesn't find the source. Would a usb 2 to usb 2 work?

Did you put your old iMac in Target Disk mode? You need to do this to use Migration Assistant to transfer your files to the new iMac.
Hold the T key while your old iMac is starting up to start up in Target Disk mode. After doing this, your new iMac will detect it as an external drive, so now you can transfer your files through Setup Assistant or Migration Assistant. See > http://support.apple.com/kb/HT5872?viewlocale=en_US

Upgrade old iMac or buy New??

Similar Messages

Maybe you are looking for