Upgrade OMS 10.2.0.5 to 11.1.0.1 ORACLE_HOSTNAME
Hi, guys
I'm going to upgrade OMS 10.2.0.5 to 11.1.0.1. Current configuration is active passive protected by clusterware 11.1.0.7. Grid Control Repository is in RAC on those node too.
The question is: in order to upgrade the OMS Do I need to export oracle_hostname before run ./runInstaller command? Or The upgrade process will take care of it and pick up the virtual hostname and don't want to re secure my 500 agents again.
Thanks in advance guys
I was not able to login to the forum from past few hours hence the delay.
To clarify:- If you are doing 2-system upgrade then while invoking the 12.1.0.2 installer you can pass this parameter and we also have a hostname field in the installer UI which will show the hostname that EM installer will use to perform the install of 12c OMS on that host. You can make sure that this field has virtual hostname.
In Pre-upgrade console, you need to provide the hostname so that we can created a db link, in that section provide the virtual hostname
So if you provide virtual hostname in these 2 places the setup with be done accordingly.
In 1-system upgrade- we don't ask any hostname in pre-upgrade console, so you just need to check the hostname field in the 12c installer that it has virtual hostname.
Similar Messages
-
Dear Gurus,
OS - RH5
Oracle 10G2.4
I need your help to understand something I don't get with my Grid Configuration.
I've create a brand new Grid Database in 10.2.0.4
Following all instruction to setup the Grid Control 10.2.0.5 which means
Create Database - Ok
1st - setup Grid 10.2.0.3 - Done - OK
2nd - Apply patchset to upgrade into 10.2.0.5 - Ok ( !!!! )
3rd - Deploy agent 10.2.0.3 and apply Patchset to upgrade into 10.2.0.5 - Done OK
In all others servers the agent status shows :
++[oracle@srvldbt02 ~]$ emctl status agent++
++Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.++
++Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.++
++---------------------------------------------------------------++
++Agent Version : 10.2.0.5.0++
++OMS Version : 10.2.0.5.0++
++Protocol Version : 10.2.0.5.0++
++Agent Home : /u01/app/oracle/product/agent10g++
++Agent binaries : /u01/app/oracle/product/agent10g++
++...++
In the OMS server the agnet shows :
+[oracle@srvldbp04 Disk1]$ emctl status agent+
Oracle Enterprise Manager 10g Release 5 Grid Control
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.2
OMS Version : Unknown
Protocol Version : 10.1.0.2.0
Agent Home : /u01/app/oracle/oms10g
Agent binaries : /u01/app/oracle/oms10g
+...+
Agent is Running and Ready
[oracle@srvldbp04 Disk1]$
Can you please tell me what shall I do? When I try to apply patch 10.2.0.5 which is in zip file
gc_x86_64_10205_part1of2.zip and is patch 3822442
the installed products shows - Installed !!!!!!
It doesn't suggest me to upgarde .....
My agent Home is
Agent Home : /u01/app/oracle/oms10g
Did I misss any step ?
Txs if you can helpYeha, that's what is starnge
In my OMS Folder there is an agenet but I don't know where !!!!
+[oracle@srvldbp04 ~]$ emctl status agent+
Oracle Enterprise Manager 10g Release 5 Grid Control
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.2
OMS Version : Unknown
Protocol Version : 10.1.0.2.0
Agent Home : /u01/app/oracle/oms10g
Agent binaries : /u01/app/oracle/oms10g
Agent Process ID : 25301
Parent Process ID : 25287
Agent URL : http://srvldbp04.int.imd.ch:1157/emd/main/
Started at : 2010-01-13 15:59:07
Started by user : oracle
Last Reload : 2010-01-13 15:59:07
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 30.98%
Agent is Running and Ready
+[oracle@srvldbp04 ~]$+
+[oracle@srvldbp04 oms10g]$ pwd+
+/u01/app/oracle/oms10g+
+[oracle@srvldbp04 oms10g]$ ls -lrt+
total 1260
-rwxr-xr-x 1 oracle oinstall 6133 May 20 2005 README.htm
-r-xr----- 1 oracle oinstall 1082 Dec 24 2008 oc4j_OCMRepeaterDeploy.sh
-rw-rw-r-- 1 oracle oinstall 961995 Feb 4 2009 OCMRepeater.ear
-rw-r--r-- 1 oracle oinstall 62 Nov 26 16:26 oraInst.loc
drwx-w-rwx 7 oracle oinstall 4096 Nov 27 11:50 jdk
drwx-w--w- 3 oracle oinstall 4096 Nov 27 11:50 jre
drwx------ 3 oracle oinstall 4096 Nov 27 11:51 rlmgr
drwx------ 4 oracle oinstall 4096 Nov 27 11:51 emcli
drwx------ 3 oracle oinstall 4096 Nov 27 11:51 agentdeploy
drwx------ 7 oracle oinstall 4096 Nov 27 11:51 uddi
drwx------ 3 oracle oinstall 4096 Nov 27 11:51 syndication
drwx------ 3 oracle oinstall 4096 Nov 27 11:51 has
drwx------ 8 oracle oinstall 4096 Nov 27 11:51 datadirect
drwx------ 6 oracle oinstall 4096 Nov 27 11:51 backup_restore
drwx------ 5 oracle oinstall 4096 Nov 27 11:51 sso
drwx------ 6 oracle oinstall 4096 Nov 27 11:51 javacache
drwx------ 5 oracle oinstall 4096 Nov 27 11:51 upgrade
drwx------ 7 oracle oinstall 4096 Nov 27 11:51 opmn
drwx------ 5 oracle oinstall 4096 Nov 27 11:51 iaspt
drwx------ 3 oracle oinstall 4096 Nov 27 11:51 slax
drwx------ 5 oracle oinstall 4096 Nov 27 11:51 precomp
drwx------ 5 oracle oinstall 4096 Nov 27 11:51 plsql
drwx------ 10 oracle oinstall 4096 Nov 27 11:51 rdbms
drwx------ 3 oracle oinstall 4096 Nov 27 11:51 srvm
drwx------ 6 oracle oinstall 4096 Nov 27 11:51 javavm
drwx------ 4 oracle oinstall 4096 Nov 27 11:51 oracore
drwx------ 5 oracle oinstall 4096 Nov 27 11:52 portal
drwx------ 5 oracle oinstall 4096 Nov 27 11:52 perl
drwx------ 3 oracle oinstall 4096 Nov 27 11:52 sqlj
drwx------ 6 oracle oinstall 4096 Nov 27 11:52 webservices
drwx------ 9 oracle oinstall 4096 Nov 27 11:52 diagnostics
drwx------ 6 oracle oinstall 4096 Nov 27 11:52 xdk
drwx------ 3 oracle oinstall 4096 Nov 27 11:52 jsp
drwx------ 4 oracle oinstall 4096 Nov 27 11:52 wireless
drwx------ 4 oracle oinstall 4096 Nov 27 11:52 wcs
drwx------ 5 oracle oinstall 4096 Nov 27 11:52 nls
drwx------ 4 oracle oinstall 4096 Nov 27 11:52 jdbc
drwx------ 2 oracle oinstall 4096 Nov 27 11:52 mesg
drwx------ 6 oracle oinstall 4096 Nov 27 11:52 sqlplus
drwx------ 6 oracle oinstall 4096 Nov 27 11:52 clone
drwx------ 7 oracle oinstall 4096 Nov 27 11:52 chgip
drwx------ 4 oracle oinstall 4096 Nov 27 11:52 assistants
drwx------ 4 oracle oinstall 4096 Nov 27 11:52 owm
drwx------ 5 oracle oinstall 4096 Nov 27 11:52 soap
drwx------ 9 oracle oinstall 4096 Nov 27 11:52 ldap
drwx------ 6 oracle oinstall 4096 Nov 27 11:52 Apache
drwx------ 11 oracle oinstall 4096 Nov 27 11:52 network
drwx------ 2 oracle oinstall 4096 Nov 27 11:52 deconfig
drwx------ 7 oracle oinstall 4096 Nov 27 11:52 dcm
-rwx------ 1 oracle oinstall 9271 Nov 27 12:03 root.sh.old
-rwx------ 1 oracle oinstall 1153 Nov 27 12:03 allroot.sh
drwxrwx--- 4 oracle oinstall 4096 Nov 27 15:44 toplink
drwx------ 7 oracle oinstall 4096 Nov 27 15:44 oui
drwxrwx--- 4 oracle oinstall 4096 Nov 27 15:44 ocm
drwxrwx--- 2 oracle oinstall 4096 Nov 27 15:44 modules
drwx------ 7 oracle oinstall 4096 Nov 27 15:44 dsa
drwx------ 25 oracle oinstall 4096 Nov 27 15:45 sysman
-rwxr-xr-x 1 oracle oinstall 5248 Nov 27 15:45 root.sh.old.1
drwx------ 3 oracle oinstall 4096 Nov 27 15:45 relnotes
drwx------ 15 oracle oinstall 4096 Nov 27 15:45 inventory
drwx------ 2 oracle oinstall 4096 Nov 27 15:45 config
drwx------ 10 oracle oinstall 4096 Nov 27 15:45 install
drwx------ 3 oracle oinstall 4096 Nov 27 15:47 lib
drwx------ 3 oracle oinstall 4096 Nov 27 15:48 jlib
drwxr-xr-x 3 oracle oinstall 12288 Nov 27 16:01 bin
drwx------ 14 oracle oinstall 4096 Nov 27 16:02 ccr
drwx------ 7 oracle oinstall 4096 Nov 27 16:03 j2ee
drwx------ 4 oracle oinstall 4096 Nov 27 16:03 uix
drwx------ 16 oracle oinstall 4096 Dec 11 16:52 webcache
-rw-r----- 1 oracle oinstall 6 Jan 13 15:59 emctl.pid
drwx------ 7 oracle oinstall 4096 Jan 13 16:16 OPatch
drwx------ 5 oracle oinstall 4096 Jan 20 12:08 cfgtoollogs
-rwxr-xr-x 1 oracle oinstall 10 Jan 27 15:52 root.sh
-rw------- 1 oracle oinstall 37 Jan 27 15:52 install.platfo -
EM12c Upgrade failing at OMS Configuration
I'm in the process of upgrading and migrating from EM 10.2.0.5 on AIX 6.1 to EM12c on RHEL 6.2 via the 2-System Upgrade method. I've been following the steps in the MOS Note "EM 12c: Upgrading to Enterprise Manager Cloud Control 12.1.0.1 on Linux x86_64 with the 2-System Method [ID 1367919.1]".
During the OMS upgrade OMS Configuration Assistant is failing with the following error:
INFO: oracle.sysman.top.oms:About to execute plug-in OMS Configuration
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration is running
INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.oms.OMSConfiguration
INFO: oracle.sysman.top.oms:Classpath = /u02/Oracle/Middleware/oms/sysman/jlib/omsConfig.jar:/u02/Oracle/Middleware/oms/../modules/com.bea.core.apache.log4j_1.2.13.jar:/u02/Oracle/Middleware/oms/jlib/emConfigInstall.jar:/u02/Oracle/Middleware/oms/sysman/jlib/emagentSDK.jar:/u02/Oracle/Middleware/oms/jdbc/lib/ojdbc5.jar:/u02/Oracle/Middleware/oms/jdbc/lib/ojdbc14dms.jar:/u02/Oracle/Middleware/oms/jlib/rcu.jar:/u02/Oracle/Middleware/oms/jlib/rcucommon.jar:/u02/Oracle/Middleware/oms/sysman/jlib/emCORE.jar:/u02/Oracle/Middleware/oms/sysman/jlib/emcore_client.jar:/u02/Oracle/Middleware/oms/../oracle_common/modules/oracle.odl_11.1.1/dms.jar:/u02/Oracle/Middleware/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/u02/Oracle/Middleware/oms/lib/xmlparserv2.jar:/u02/Oracle/Middleware/oms/sysman/jlib/com.bea.core.apache.log4j_1.2.13.jar:/u02/Oracle/Middleware/oms/sysman/jlib/emCoreSDKImpl.jar
INFO: oracle.sysman.top.oms:BaseConfiguration:invoke:Starting BaseConfiguration invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=5:microstep=0
INFO: oracle.sysman.top.oms:Fetcing ports from teh static ports file: /u02/Oracle/Middleware/.gcinstall_temp/staticports.ini
INFO: oracle.sysman.top.oms:Setting agent aggregate xml
INFO: oracle.sysman.top.oms:Date: Wed Sep 19 22:07:47 CDT 2012
INFO: oracle.sysman.top.oms:COMMAND: /u02/Oracle/Middleware/oms/bin/omsca NEW -RESPONSE_FILE /u02/Oracle/Middleware/oms/omscarespfile -lock_console -lock_upload -CONFIGURE_REPEATER true -nostart
INFO: oracle.sysman.top.oms:
Check the OMS Configuration Assistant logs at: /u02/Oracle/Middleware/oms/cfgtoollogs/omsca
INFO: oracle.sysman.top.oms:Oracle Enterprise Manager 11g Release 1 Grid Control
INFO: oracle.sysman.top.oms:Copyright (c) 2009, 2010, Oracle. All rights reserved.
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Doing pre requisite checks ......
INFO: oracle.sysman.top.oms:Pre requisite checks completed successfully
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Doing infrastructure setup ......
INFO: oracle.sysman.top.oms:Infrastructure setup of EM completed successfully.
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Doing pre deployment operations ......
INFO: oracle.sysman.top.oms:Pre deployment of EM completed successfully.
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Deploying EM ......
INFO: oracle.sysman.top.oms:Deployment of EM completed successfully.
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Configuring webtier ......
INFO: oracle.sysman.top.oms:Configuring webTier completed successfully.
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:Securing OMS ......
INFO: oracle.sysman.top.oms:java.lang.Exception: emkey is not present in repository and backup is not present on file system. Hence emkey cannot be copied to credstore.
INFO: oracle.sysman.top.oms: at oracle.sysman.omsca.adapter.wls.OMSWLSAdapter.adapterPostDeployAndReposSetup(OMSWLSAdapter.java:2749)
INFO: oracle.sysman.top.oms: at oracle.sysman.omsca.framework.OMSGenericAdapter.postDeployAndReposSetup(OMSGenericAdapter.java:327)
INFO: oracle.sysman.top.oms: at oracle.sysman.omsca.framework.OMSCAFreshInstall.execute(OMSCAFreshInstall.java:193)
INFO: oracle.sysman.top.oms: at oracle.sysman.omsca.framework.OMSConfigAssistantDriver.main(OMSConfigAssistantDriver.java:221)
INFO: oracle.sysman.top.oms:OMSCA-ERR:Securing of OMS failed
INFO: oracle.sysman.top.oms:
INFO: oracle.sysman.top.oms:OMSCA-ERR:Post "Deploy and Repos Setup" operations failed. Check the trace file:/u02/Oracle/Middleware/oms/cfgtoollogs/omsca/omsca_20120820220747.log
INFO: oracle.sysman.top.oms:
Check the OMS Configuration Assistant logs at: /u02/Oracle/Middleware/oms/cfgtoollogs/omsca
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
Looking at the OMS CA logs I'm seeing these errors:
SEVERE: Exception: during deploying OWSM
Name of Exception: exceptions.SystemExit
Code of Exception: 11
<traceback object at 3>
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: The domain directory must exist and contain config/config.xml
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.readDomain(WLScriptContext.java:396)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.readDomain$18(/tmp/WLSTOfflineIni2832777503027975460.py:83)
at org.python.pycode._pyx3.call_function(/tmp/WLSTOfflineIni2832777503027975460.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx47.configureOWSM$1(/u02/Oracle/Middleware/oms/sysman/omsca/scripts/wls/owsm.py:26)
at org.python.pycode._pyx47.call_function(/u02/Oracle/Middleware/oms/sysman/omsca/scripts/wls/owsm.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx47.f$0(/u02/Oracle/Middleware/oms/sysman/omsca/scripts/wls/owsm.py:103)
at org.python.pycode._pyx47.call_function(/u02/Oracle/Middleware/oms/sysman/omsca/scripts/wls/owsm.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:124)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: The domain directory must exist and contain config/config.xml
at com.oracle.cie.domain.script.ScriptExecutor.readTemplate(ScriptExecutor.java:448)
at com.oracle.cie.domain.script.jython.WLScriptContext.readDomain(WLScriptContext.java:388)
... 30 more
Aug 20, 2012 10:11:11 PM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterPostDeployAndReposSetup
FINE: Done Deploying OWSM11
Aug 20, 2012 10:11:11 PM oracle.sysman.omsca.framework.OMSGenericAdapter postDeployAndReposSetup
SEVERE: OMSCA-ERR:Post "Deploy and Repos Setup" operations failed. Check the trace file:/u02/Oracle/Middleware/oms/cfgtoollogs/omsca/omsca_20120820220747.log
Aug 20, 2012 10:11:11 PM oracle.sysman.omsca.framework.OMSCAFreshInstall execute
SEVERE: Post "Deploy and Repos Setup" operations failed.
Aug 20, 2012 10:11:11 PM oracle.sysman.omsca.framework.OMSConfigAssistantDriver main
FINE: Got resultfalse
Has anyone seen this before?
Thanks,
LeightonIf you follow Sushil's link, the step you should have performed is mentioned in (e) : the emkey should be copied before taking backup; it's mentioned clearly.
Please share exact steps you did to copy the emkey
- when did you run "emctl config emkey" command ; it seems you run it after backup and before starting upgrade to 12c. Please confirm
- did you see a 12c Installer error message for missing emkey ? did that prompt you to copy the emkey?
- on which box/oms you run the "emctl config emkey" command
- which repository details did you use in "emctl config emkey" command; because at this point of time you have a repository of the old running EM and a cloned repository ( from old EM )
Thank you.
Suman -
OMS 12c Upgrade Stuck at this error Error in invoking target 'client_shared
Hi All
We are Upgrading OMS from 11.1 to 12c
stuck at this error after invoking runInstaller
Following 1 system upgrade. (graphical mode).
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: /opt/app/wls/oms12c/oms/bin/genclntsh
INFO: make: execvp: /opt/app/wls/oms12c/oms/bin/genclntsh: Permission denied
INFO: make: *** [client_sharedlib] Error 127
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/opt/app/wls/oms12c/oms/rdbms/lib/ins_rdbms.mk'. See '/opt/app/oraInventory/logs/installActions2012-08-02_06-38-02-PM.log' for details.
Exception Severity: 1
INFO: POPUP WARNING:Error in invoking target 'client_sharedlib' of makefile '/opt/app/wls/oms12c/oms/rdbms/lib/ins_rdbms.mk'. See '/opt/app/oraInventory/logs/installActions2012-08-02_06-38-02-PM.log' for details.
Click "Retry" to try again.
Click "Ignore" to ignore this error and go on.
Click "Cancel" to stop this installation.
Please Advise
Edited by: TechAdmin on Aug 2, 2012 4:09 PM
Edited by: TechAdmin on Aug 2, 2012 4:11 PMI installed all the packages and it allowed me to proceed furthur
but now it throws another error saying that
The log says "ORA-12003: materialized view "SYSMAN"."MGMT_ECM_MD_ALL_TBL_COLUMNS" does not exist" during the OMS Upgrade using graphical mode.
We are not sure if that Materialized view ever exists on it or not.
Please advise
Below is the detailed log :
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:exiting the thread...
INFO: oracle.sysman.top.oms:[Initializing the EM RCU Runner, Failed Parameter Validation]
INFO: oracle.sysman.top.oms: action logger path calculated finally: /opt/app/wls/OMS12c/oms/sysman/log/schemamanager/m_073012_1147_AM/m_073012_1147_AM.TRANSX/
INFO: oracle.sysman.top.oms:The transx command execution is completed with the status 255
INFO: oracle.sysman.top.oms:The transx action failed, Run the RepManager with -action transx
INFO: oracle.sysman.top.oms:process_id:dr40kpyuxcpe
INFO: oracle.sysman.top.oms:Failure...
INFO: oracle.sysman.top.oms:1 error(s) happened in performing the action:
INFO: oracle.sysman.top.oms:1):
ORA-12003: materialized view "SYSMAN"."MGMT_ECM_MD_ALL_TBL_COLUMNS" does not exist
File:/opt/app/wls/OMS12c/oms/sysman/admin/emdrep/sql/core/11.2.0.1/ecm/ecm_tables_alter.sql
Statement:DROP MATERIALIZED VIEW MGMT_ECM_MD_ALL_TBL_COLUMNS
INFO: oracle.sysman.top.oms:The plug-in Repository Upgrade has failed its perform method
The other logs at <OMS_HOME>sysman/log/schemamanager/* says that the index is missing we checked our backups and all other possible ways to find if that index ever existed but we dont see anything as such.
2012-08-06 12:07:54,476 [t970bytvwebs] INFO emschema.t970bytvwebs - index on mgmt_messages found: true on try: 196
2012-08-06 12:08:00,479 [t970bytvwebs] INFO emschema.t970bytvwebs - index on mgmt_messages found: true on try: 197
2012-08-06 12:08:06,570 [t970bytvwebs] INFO emschema.t970bytvwebs - repos connection is not null, using old one
2012-08-06 12:08:06,571 [t970bytvwebs] INFO emschema.t970bytvwebs - executing: SELECT count(*) FROM all_objects WHERE object_name='MGMT_MESSAGES_IDX_01' AND owner='SYSMAN'
2012-08-06 12:08:06,572 [t970bytvwebs] INFO emschema.t970bytvwebs - index on mgmt_messages found: true on try: 198
2012-08-06 12:08:12,574 [t970bytvwebs] INFO emschema.t970bytvwebs - index on mgmt_messages found: true on try: 199
2012-08-06 12:08:18,576 [t970bytvwebs] INFO emschema.t970bytvwebs - not found index on mgmt_messages
2012-08-06 12:08:18,576 [t970bytvwebs] INFO emschema.t970bytvwebs - error: not found index on mgmt_messages for transx repos user exists: true mgmt_messages exists: true; index on mgmt_messages exist: false; found connection for repos user: true
2012-08-06 12:08:18,576 [t970bytvwebs] ERROR emschema.t970bytvwebs - Failed Parameter Validation
2012-08-06 12:08:18,576 [t970bytvwebs] ERROR emschema.t970bytvwebs - NULL Exception was thrown!
2012-08-06 12:08:18,576 [t970bytvwebs] ERROR emschema.t970bytvwebs - Failed Parameter Validation
we never had that index in our database.so that we could go back and check if that exits
Please suggest a solution for this.
Thanks
Unfortunately we dont have any other database to compare it to see wether it exits
Edited by: TechAdmin on Aug 6, 2012 11:34 AM -
OMS, Repository, Agent Grid upgrade
Newbie here and will try to explain as best as I can.
So I installed Grid 10.2.0.2 on Windows XP system. I have used the patchset 12.0.4.0 to upgrade OMS, repository and agent. I have followed the documentation on how to do this. First I patched OMS by setting the environment variable to C:\OracleHomes\OMS10g and then clicked on setup oui installed the patch. I did the same for the Agent and change the env var to the agent home and patched the agent. According to the documentation the OMS and repository are upgraded together. So after both homes were upgraded, I open a command prompt to see the status of the oms agent and the management agent using "emctl status agent" and I see the following information.
OMS
Agent Version : 10.1.0.5.0
OMS Version : Unknown
Agent
Agent Version : 10.2.0.4.0
OMS Version : 10.2.0.4.0
I have also updated the database to 10.2.0.1 (orginally 10.1.0.5) and then patched to 10.2.0.4 and it show this when I connect to SQLPlus, so that seemed to work.
So why is the OMS agent showing up as 10.1.0.5 even though I assumed it was patched. Is this normal or did something fail during upgrade.
ThanksOK, I guess that makes sense.
Yes, I installed 10.2.0.1 into a separate home and used DBUA to upgrade the repository DB from 10.1.0.5 to 10.2.0.1. I then patched it to 10.2.0.4 and again used DBUA and so I am assuming my repository would be at 10.2.0.4 and that's why I was asking why the command prompt see it as 10.1.0.5.
The home directories I have is
C:\OracleHomes\agent10g, oms10g, db10g, oradata- This is for grid
C:\Oracle\10.2.0\db_1- is the 10.2.0.4 database.
The other reason I am asking about this is that I am using the agentdownload.vbs to install the management agent on a few systems. Before the upgrade I was able to successful install it using the 10.2.0.1 and when I upgraded to 12.0.4.0, I noticed I now had three folders 10.2.0.1, 10.2.0.2 and 10.2.0.4 that the agentdownload.vbs reside in. Since I am at 10.2.0.4 I chose to use that vbs file. I tried it on one of systems, but it doesn't seem to work and is asking about securing the agent. I made the necessary changes with the env variable, but it seems to never makes a connection my management server. I then tried to use the 10.2.0.2 vbs file and it works just fine. So I am thinking during my all of trials of getting grid and DB upgraded to 10.2.0.4 that something is amiss. So that's why I am question the versioning on the command prompt.
Thanks -
Error while Upgrading Grid EM to 10.2.0.5
I have 10.2.0.4 OMS/DB/Agent running on Windows 32 bit. I am trying to upgrade OMS to 10.2.0.5. I am getting following error.
I get same error if I try to upgrade directly from 10.2.0.2
Output generated from configuration assistant "OC4J Instance Configuration Assistant":
Command = D:\oracle\product\10.2.0\oms10g/jdk/bin/javaw.exe -Djava.io.tmpdir=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1 -mx512M -classpath D:\oracle\product\10.2.0\oms10g/dcm/lib/dcm.jar;D:\oracle\product\10.2.0\oms10g/dcm/lib/oc4j_deploy_tools.jar -Djava.library.path="D:\oracle\product\10.2.0\oms10g\lib32;D:\oracle\product\10.2.0\oms10g\bin;D:\oracle\product\10.2.0\agent10g\jlib;D:\oracle\product\10.2.0\agent10g\bin;D:\oracle\product\10.2.0\oms10g\bin;D:\oracle\product\10.2.0\oms10g\jlib;D:\oracle\product\10.2.0\db10g\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\SecureCRT" -Doracle.ias.sysmgmt.logging.logdir=D:\oracle\product\10.2.0\oms10g/j2ee/home/log oracle.j2ee.tools.deploy.Oc4jDeploy -oraclehome D:\oracle\product\10.2.0\oms10g -verbose -inifile D:\oracle\product\10.2.0\oms10g/j2ee/deploy.ini -redeploy
Reading ini file - 'D:\oracle\product\10.2.0\oms10g/j2ee/deploy.ini'
Adding web-app 'wsrp-samples.war' for app 'portletapp'.
Initializing DCM...done.
OC4J instance 'home' already exists.
Starting OC4J instance 'home'...done.
Redeploying application 'portletapp' to OC4J instance 'home'.
Notification ==> Application Deployer for portletapp STARTS [ 2009-09-30T15:17:55.923CDT ]
Notification ==> Undeploy previous deployment
Notification ==> Removing files for app file:/D:/oracle/product/10.2.0/oms10g/j2ee/home/applications/portletapp.ear
Notification ==> Copy the archive to D:\oracle\product\10.2.0\oms10g\j2ee\home\applications\portletapp.ear
Notification ==> Unpack portletapp.ear begins...
Notification ==> Unpack portletapp.ear ends...
Notification ==> Initialize portletapp.ear begins...
Notification ==> Initialize portletapp.ear ends...
Notification ==> Initialize wsrp-samples begins...
Notification ==> Initialize wsrp-samples ends...
Notification ==> deleting: D:\oracle\product\10.2.0\oms10g\j2ee\home\applications\portletapp.ear
Notification ==> deleting: /D:/oracle/product/10.2.0/oms10g/j2ee/home/applications/portletapp/wsrp-samples.war
Notification ==> Application Deployer for portletapp COMPLETES [ 2009-09-30T15:17:56.126CDT ]
Calling updateConfig to notify DCM of new deployments...failed!
ERROR: Caught exception calling updateConfig: oracle.ias.sysmgmt.exception.ParsingException: The "apache" plugin provided by the "OHS" component threw an exception while reading configuration data.
Resolution:
The information provided by the "OHS" component in the base exception may be helpful.
In addition, here are some common causes of problems:
incorrect permissions on files
configuration files are missing or invalid
Exception thrown by plugin "apache":
oracle.ias.sysmgmt.repository.plugin.advanced.apache.parser.ParserException
parsing D:\oracle\product\10.2.0\oms10g\Apache\Apache\conf\ssl.conf: </ expected at line 39 column 44, but encounter <EOF: END OF FILE>
ERROR! DEPLOY TOOL CANNOT CONTINUE DEPLOYMENTS: could not update DCM repository with newly deployed applications - ALL APPLICATIONS WILL BE UNDEPLOYED.
Undeploying application 'portletapp' from OC4J instance 'home'.
Application 'portletapp' successfully undeployed.
Stopping OC4J instance 'home'...done.
Terminating DCM...done.
Copying D:\oracle\product\10.2.0\oms10g/j2ee/deploy.ini to D:\oracle\product\10.2.0\oms10g/j2ee/deploy.ini.1254341884485.bak.
Writing any undeployed entries back to D:\oracle\product\10.2.0\oms10g/j2ee/deploy.ini.
Oc4jDeploy tool completed, but with errors.
Configuration assistant "OC4J Instance Configuration Assistant" failed
The "D:\oracle\product\10.2.0\oms10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Thanks Guys,
I found my issues listed as "Known Issues with 10.2.0.5"
Metalink Doc 787872.1
Rgds
PG -
OMS generates tones of core files in OMS_HOME?
Hi,
We recently upgraded OMS to 10.2.0.4 and found that OMS has generated lot of core files where the file size is 0 bytes.Please let me know,what might could be the cause.
Thanks,
Regards,
VinothHi,
Thanks for your response.
File name format will be.
core.3586
core.3587
core.35XX
core.****
Rest you can guess it.
Thanks,
Regards,
Vinoth -
GC upgrade 10.2.0.1 to 10.2.0.3
Grid Control on Solaris 10
unzip patch p3731593_10203_SOLARIS64.zip and try to upgrade OMS to 10.2.0.3 but received following error in installation log file.
(all pre installation patch already applied. i.e. 4329444 and 5330513(agent) as well)
INFO: Starting to execute configuration assistants
INFO: Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
Command = oracle.sysman.emcp.oms.RepositoryPatchUpgrade has failed
Exception : java.lang.Exception: Command: /u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=nsspugr01.aoa.nhss.local)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.abc.xyz.local))) -action upgrade -verbose -repos_user sysman failed. Exit code: expected [0 ], but got 45
INFO: Configuration assistant "Repository Upgrade" failed
INFO: The "/u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: Since the option is to overwrite the existing /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/configToolFailedCommands.bak.1
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
suggestions please.Hi
look at OMS_HOME/sysman/log
you will find the log from the sql actions against the repository and there you should find error from which the problem can be diagnosed. -
Grid control 10.2.0.3 with DB 10.2.0.4
Hi,
I have installed Oracle Enterprise Manager Grid Control 10.2.0.3 with new database along with the installation.
I also have a Existing database 10.2.0.4 in another server.
1. How can I upgrade my Grid control 10.2.0.3 to 10.2.0.4?
2. How can I monitor/Connect my Existing database 10.2.0.4 from Grid Control 10.2.0.3?
Is it possible to monitor database 10.2.0.4 from Grid Control 10.2.0.3 which is lower version?
Kindly provide the exact document/steps to do the above activities.
Regards,Thanks for All for replying.
*1. How can I upgrade my Grid control 10.2.0.3 to 10.2.0.4?*
I have upgraded the Grid Control Agent and OMS from 10.2.0.3 to 10.2.0.4
When we upgrade the OMS which also upgrade the Repository database.
Apply the patchset p3731593_10204_Linux-x86-64.zip (Which comes with Grid_Control_10.2.0.4.0_Linux-x86-64.zip)
su - oracle
cd 3731593/Disk1
./runInstaller (Run two times for Agent and oms upgrade)
Agent upgrade_
During upgrade
Specify Home Details: Select the Agent Home to upgrade Grid Control Agent.
Ex: /u01/app/oracle/OracleHomes/agent10g
OMS upgrade+
Specify Home Details: Select the oms home to upgrade oms
Ex: /u01/app/oracle/OracleHomes/oms10g
*2. How can I monitor/Connect my Existing database 10.2.0.4 from Grid Control 10.2.0.3?*
Install Grid Agent on the existing database server 10.2.0.4
Download Linux_x86_64_Grid_Control_agent_download_10_2_0_4_0.zip from OTN http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html
su - oracle
cd /u01/software/GridAgent/linux_x64/agent
./runInstaller
Refer:
[To Install an Additional Management Agent Using OUI|http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm#sthref318]
Oracle® Enterprise Manager Grid Control Installation and Basic Configuration
10g Release 4 (10.2.0.4)
Part Number E10953-05
3 Installing Enterprise Manager
Thanks
Mukarram Khan
Edited by: Mukarram Khan on Feb 6, 2009 11:04 PM -
Has anyone got a stable Grid Control operation going?
Has anyone managed to get their Grid Control system running smoothly that hardly ever needs a restart?
If so please state your versions and operating systems involved and how stable it is.
My team has been trying to get GC 10.2.0.4 (with a 10.2.0.3 repository database) on AIX 5L stable over a year now. It wasnt even stable with GC 10.2.0.3. Its never been stable. OMS crashes every weekend and sometimes during the week.
I have GC + Agent + Repository database all on one AIX 5L LPAR with 4GB RAM and 2 cpus and around 250 targets.
I have to cron a script that I wrote to restart the agent and OMS every night but it dies at the weekends anyway and Monday mornings are GC restart time.
The Agents on the target hosts are either 10.2.0.4 or 10.2.0.5. The Agents are usually fine apart from the annoying COLL_DISABLED bug which is really annoying and the patch 6780904 or Agent 10.2.0.5 didnt get rid of.
I'm thinking about installing OMS 10.2.0.5 on a separate box either AIX 5L or Windows 2003 Server then migrating the Agents over to this new OMS gradually. Oracle Support have been pretty unhelpful in the past and that is why I'm posting here, hoping that some kind soul will give me some good advice.
Thanks in advance
JamesRe,
maybe try using same version for the agent...
installing 10.2.0.4 agent is not a big issue as upgrade 10.2.0.5
Otherwise take a look to the metalink doc.
Checklist for EM 10g Grid Control 10.2.x to 10.2.0.4/10.2.0.5 OMS and Repository Upgrades [ID 464674.1]
Some bugs are also reported by using 10.2.0.5.0 agent to 10.2.0.4 OEM GC
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=8592685
10.2.0.5.0 agent is collecting the data guard information that 10.2.0.4 OMS's repository is not aware of and hence upload is failing to insert into table 'mgmt_ha_dg_target_summary' which is not present in case of 10.2.0.4.0 repository. This issue is caused due to published BUG 8592685 : ORA-942 WHILE TRYING TO LOAD DATA FOR THE HA_DG_TARGET_SUMMARY METRIC
Solution:
1. Upgrade OMS to 10.2.0.5 so that the table 'mgmt_ha_dg_target_summary' gets created.
OR
2. Download and apply Patch 8898785 on top of 10.2.0.5.0 Agent .
*T -
Switchover in a data guard environment using Grid Control 10.2.0.3
I've tested switchover in a data guard environment using Data Guard Broker in Grid Control.
However, at times, i receive the message "RemoteOperationException: failed to establish input streaming thread". It looks like it has problems connecting to the remote node using the host credentials supplied. I know the credentials are ok because this worked before. If i test preferred credentials, it's ok too..
The workaround has been to restart the database and this seems to work.
Has anyone experienced this?Thanks for All for replying.
*1. How can I upgrade my Grid control 10.2.0.3 to 10.2.0.4?*
I have upgraded the Grid Control Agent and OMS from 10.2.0.3 to 10.2.0.4
When we upgrade the OMS which also upgrade the Repository database.
Apply the patchset p3731593_10204_Linux-x86-64.zip (Which comes with Grid_Control_10.2.0.4.0_Linux-x86-64.zip)
su - oracle
cd 3731593/Disk1
./runInstaller (Run two times for Agent and oms upgrade)
Agent upgrade_
During upgrade
Specify Home Details: Select the Agent Home to upgrade Grid Control Agent.
Ex: /u01/app/oracle/OracleHomes/agent10g
OMS upgrade+
Specify Home Details: Select the oms home to upgrade oms
Ex: /u01/app/oracle/OracleHomes/oms10g
*2. How can I monitor/Connect my Existing database 10.2.0.4 from Grid Control 10.2.0.3?*
Install Grid Agent on the existing database server 10.2.0.4
Download Linux_x86_64_Grid_Control_agent_download_10_2_0_4_0.zip from OTN http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html
su - oracle
cd /u01/software/GridAgent/linux_x64/agent
./runInstaller
Refer:
[To Install an Additional Management Agent Using OUI|http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm#sthref318]
Oracle® Enterprise Manager Grid Control Installation and Basic Configuration
10g Release 4 (10.2.0.4)
Part Number E10953-05
3 Installing Enterprise Manager
Thanks
Mukarram Khan
Edited by: Mukarram Khan on Feb 6, 2009 11:04 PM -
Queries regarding Boleto and Duplicata
Hi All,
I am a new member of this site.We have got a requirement for developing sap scripts for Brazil. Did anyone happen to work on Boleto and duplicata?
The standard forms available are J_1b_boleto_itau and j_1b_duplicata.
Can anyone please explain the functinality of the driver program RFFOBR_D which is for both the forms mentioned above?
Please help me out.1) IS OMS 10g also going out of support in July. If yes, what is latest version availableTo know about support Life cycle you could review the below document :
www.oracle.com/us/support/.../057419.pdf
Or
MOS notes :FAQ for Products in Extended Support [ID 757445.1]
Latest version : 12c
2) Can we upgrade just repository DB (OEM DB) without upgrading OMS software (as oracle 10g is going out of support)yes
As view just to know :
http://learnwithme11g.wordpress.com/tag/upgrade-oem/
3) Steps involved in upgrading OMS from 10g to 11g.Review this :
Master Index for Grid Control OMS and Repository Installation, Patching and Upgrade [ID 1277921.1] -
Error to update Grid Control 10.2.0.3 for 10.2.0.5
Hi i'm receve this error to update gril control in new repository . first im install new database 11.1.0.7 and create a news database(install OMS together) . after i'm update install of grid control. i'm install a version 10.2.0.3 and make upgrade OMS for 10.2.0.5. In install agent i receve error in java.
silentInstall2009-06-19_06-02-37AM.log
Error finding file /u01/app/oracle/agent10g/sysman/config/emoms.properties
Error finding file /u01/app/oracle/agent10g/sysman/config/emoms.properties
String index out of range: -10
An error occured while trying to execute command.
The file /u01/app/oracle/agent10g/config/ias.properties cannot be found while looking for variable InfrastructureUse.
At this time, the Oracle Application Server middle-tier will be shut down. There may be a brief pause in the installation while the middle-tier processes are stopped.
"An error occured while trying to execute command."
File not found: /u01/app/oracle/agent10g/Apache/modplsql/conf/dads.conf
File not found: /u01/app/oracle/agent10g/Apache/modplsql/conf/cache.conf
A runtime exception occurred during the execution of this action.
A runtime exception occurred during the execution of this action.
This silent installation was unsuccessful.Yes this is what I do, but still receive "Insufficient privileges to write to that location". So I am forced to use normal file system to be able to continue.
After that I run into the current problem saying OMS configuration failed (see details....) and I try:
./opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=uxlpgrid01:6200
3 of 5 processes started.
ias-instance id=EnterpriseManager0.uxlpgrid01
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/home/default_island
Error
--> Process (pid=0)
no port available from the port range
failed to start a managed process after the maximum retry limit
no port available from the port range
no port available from the port range
Log:
none
ias-component/process-type/process-set:
OC4J/OC4J_EMPROV/default_island
Error
--> Process (pid=0)
no port available from the port range
failed to start a managed process after the maximum retry limit
no port available from the port range
no port available from the port range
Log:
none
Then:
./opmnctl status
Processes in Instance: EnterpriseManager0.uxlpgrid01
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 23861 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 27021 | Alive
OC4J | home | N/A | Down
OC4J | OC4J_EM | 10403 | Alive
OC4J | OC4J_EMPROV | N/A | Down
WebCache | WebCache | 23872 | Alive
WebCache | WebCacheAdmin | 23863 | Alive
Overwhelming :-(
Thanks for helping
Askia. -
Hi,
I have upgraded OMS to 10.2.0.5.0. After I upgraded an agent of one of my target hosts to 10.2.0.5.0, it reports the following alerts on multiple databases on this host:
Service seeddata.regress.rdbms.dev.us.oracle.com is Down.
How do I correct this error?
Thanks,It seems you have not set the db_domain parameter. So, it's using the default "regress.rdbms.dev.us.oracle.com" as domain name.
-
Anyone running 10.2 GC on Windows?
Hello All,
Since the new version came out, has anyone installed 10.2 GC (Windows version)?
Thanks,
RodneyI took the plunge right after it was suddenly available on OTN. I upgraded from a 10.1 installation and things went pretty smoothly, right up to the point where the migration assistant failed and I had to complete the upgrade manually (ugh).
Here's the text of the TAR I filed with Oracle. It turns out that they have no idea what the error I've listed means or where it came from. I just love filing TARs.
### Please describe the problem or question (listing any error messages): ###
I'm trying to upgrade my GC installation from R1 to R2 (just posted for
Windows). I'm getting an error in the last step of the "Oracle Enterprise
Manager Grid Console" section while running the configuration assistant "OMS
Upgrade Migration". Here is the error from the installer log:
Command = oracle.sysman.emcp.upgrade.oms.OMSUpgradePlugIn has failed
Exception : oracle.sysman.emCfg.common.CfwException:
oracle.sysman.emCfg.common.CfwException: Command: CMD /c
E:\OracleHomes\oms10g\sysman\admin\emdrep\bin\RepManager -connect
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTO =TCP)(HOST=epecwebs02.dep.state.pa
us)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.dep.state.pa.us))) -action
upgrade -verbose -repos_user sysman failed. Exit code: expected [0 43 45 ],
but got 3
INFO: Configuration assistant "OMS Upgrade Migration" failed
INFO: The "E:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands" script
contains all commands that failed, were skipped or were cancelled. This file
may be used to run these configuration assistants outside of OUI. Note that you
may have to update this script with passwords (if any) before executing the
same.
-----
Maybe you are looking for
-
When I try to download the latest version of itunes on my computer, which is tethered to my iphone, I get a message saying the music on my phone needs to be moved from "purchased" to a Library. I search and can't find instructions on how to do this.
-
IPod not showing up on computer or in iTunes
My iPod mini (It's the older version of iPod mini in the darker colors) recently stopped showing up on my iMac and iTunes. It charges, but since it doesn't show up, I can't add music or anything. I already looked at the support page Apple has for thi
-
My Window 7 notebook can't log on to my iMac after installing Lion.
I have a home network with my Imac and my wife's window 7 Notebook. Router is an Airport Extreme. Before installing Lion. I can connect to my iMac from Window using "\\imac name". Also I have a couple iMac's folders mounted as network drives on the W
-
Question: Has anyone experienced on an IPad 2 this problem? I receive all emails but on my IPad cannot open any of them. This was not true a month ago and I have found no way to correct the problem. Would appreciate any input.
-
Can I connect my iPad2 to iMac keyboard?
I turned on the iPad's Bluetooth and it will not see the iMac keyboard. Can it be connected and if so how?