Upgrade one line at a time?
We have a family plan in which both lines are available to upgrade. Good thing, too... as the phones are almost dead. However, the gf wants the iPhone 4s, I would like the Droid Prime (when/if it comes out). Her phone is worse off than mine, so I'd like to pre-order the iPhone 4s, while waiting to upgrade my line (the primary line). If I do upgrade only her line, since it's a new 2-yr agreement, would I lose out on my ability to upgrade, and/or the $30 credit towards the upgrade on my line?
Thanks!
downstat wrote:
We have a family plan in which both lines are available to upgrade. Good thing, too... as the phones are almost dead. However, the gf wants the iPhone 4s, I would like the Droid Prime (when/if it comes out). Her phone is worse off than mine, so I'd like to pre-order the iPhone 4s, while waiting to upgrade my line (the primary line). If I do upgrade only her line, since it's a new 2-yr agreement, would I lose out on my ability to upgrade, and/or the $30 credit towards the upgrade on my line?
Thanks!
if your ordering on her line, it will not affect your line
each line has its own contract
Similar Messages
-
How do I scroll one line at a time in Lion?
I want to upgrade to Lion but need the functionality of the scroll bar arrows. I have learned that the functionality of the arrows is part of the core operating system and is not being replaced. Any suggestions as to any add-on devices that would allow this function?
Thanks,
RichIf the program/window is not a text-based one (such as a word processor), you can usually use the up and down arrow keys to scroll up or down one line at a time.
There are often mods to this behavior, but exactly what depends on the program. Test with the up and down arrow keys in conjunction with the usual modifier keys - Shift, Command, Option, etc. -
How can I display one line at a time on a PPT slide
I am using OFFICE for the Mac (2008).
In the past, I have known how to do this using PPT on a Windows PC..
But something has changed and I can no longer figure out how to get each line on a PPT slide to appear one line at a time every time I click it.
It's not that difficult, but I can't figured out where they moved the "Appear" option.
I am NOT using KEYNOTE, but PowerPoint from OFFICE for the Mac (2008)
Can someone help me.
Thanks,
TomSince this is a Keynote discussion forum, there may be no one here that knows. I personally hate PP and could care less about how to make one line display at a time. It is easy on Keynote and that is all I need to know. You might want to look for a PP forum and ask there.
-
I have tried using about:config options mousewheel.withnokey.sysnumlines > false and custom set mousewheel.withnokey.numlines, but it makes a difference only when I use a mouse, which I don't use most of the time on this laptop. I use down/up keyboard errors to scroll, and the page scrolls one-line-at-a-time, very slow and lagging. Is there a way around this?
I have reinstalled Chrome as secondary browser only because of this, FF4 otherwise really kicksass. Thank you for an amazing browser and any feedback on my issue.Well I am using those, but it is not very practical. What puzzles me is that only Firefox has this behaviour, I have tried last versions of IE, Chrome, Opera - all three scroll much faster than Firefox 4 using down/up keyboard arrows.
Thanks for the reply, I really hope to get a solution to this. -
Reading in one line at a time.
How can I read one line at a time?
String sData = "One large string"
StringReader reader = new StringReader(sData);
StringBuffer buf = new StringBuffer();
String line = "";
while ((line = reader.toString()) != null) {//This line does not read one line at a time. Is it possible to do the with StringReader?
StringTokenizer tok = new StringTokenizer(line, "|");
Thanks:0)The following code snippet does what you want :-)
String test = new String("testString \n with \n multiple lines");
StringReader strReader = new StringReader(test);
BufferedReader strBufRdr = new BufferedReader(strReader);
String line = null;
try {
while((line=strBufRdr.readLine())!=null) {
System.out.println(line);
catch(IOException e) { System.out.println(e); }Have fun! -
Make image appear one line at a time
I have an image of a seashell that I created in Photoshop.
It's just black and white outline of an image. What I want to do is
reveal this seashell image one line at a time. I tried creating
motion paths but only part of the image is visible at any given
time, the image doesn't get revealed toward the end. Any help would
be greatly appreciated.
To give an idea of what I mean, this link here will show
that:
http://www.flashforwardconference.com/past_winners
. Once on the page click on the link "Type Drawing" next to the
words Typography:
Thank you,
arI'd suggest masking the image layer and then using whatever
form of animation (tweens, brute force, etc) works best to reveal
the image through the mask. If the image is organic in nature (and
assuming that you don't just want to reveal it top to bottom like a
scan) then probably hand drawing onto the mask frame-by-frame is
the best way (although this adds a lot of keyframes). -
Fillable pdf's returned by clients are readable only one line at a time
We have been emailing fillable pdf questionnaires to our customers for them to complete and return via email. When some of them have come
back, they are only viewable one line at a time, we need to highlight the fillable field that the customer completed so we can view their answer.
Does anyone know why this occurs and why it would be isolated to a few cases? Thanks!
GeorgeThey were probably filled-in and saved with the Preview application on the Mac. For more information and some approaches you can take to correct, see: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html
-
Utility to send text file over GPIB, one line at a time?
We are developing instrumentation that receives data and commmands over GPIB as plain text, and returns them as well. I'd like to create GPIB "batch" files and send them over the bus, one line at a time, so I can debug the instruments' behavior. I'd also like to be able to read back responses, one line at a time.
Is there such a utility? I've got our programmer working on something like this, but I'd hate to have him re-invent an existing wheel.
Thanks!Apart from NI-SPY, I have not heard of such a utility. This may be simple to implement using proper termination. If the instrument is capable of sending line feeds or carriage return, you should be able to easily create a document. Also, using IBWRTF, you could write the ASCII file (containing the termination characters) to the bus. Depending on how you have your timeouts specified, this may be ideal.
Alternately, if you read a static amount of data, you could IBRD chunks of data. the result may need editing for broken words at the end of a line but would achieve such a result.
Ryan Mosley
National Instruments, Applications Engineer
http://www.ni.com/exchange -
Photo printing slow one line at a time
My first time printing phots on my Officejet 4620 and it is taking 20 minutes per picture one line at a time. Very frustrated. Call the help line and was told tht how this printer works.....
Many things can affect printing photos. Wireless connectivity (if applicable), paper size, print quality, software used to print the photo, printer design optimization (photo printer vs. office printer), security software used on your computer, etc.....
That being said, this photo printing document may offer some information of benefit:
http://www.hp.com/united-states/consumer/digital_photography/print_better_photos/tips/printer-settin...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you. -
I want to add one line at a time in listbox/textbox just like InsertTextboxLine funtion in CVI. I can not find similar VI in labview. I think I can do it long way...by saving listbox to an array then append my line at the end of the array and send updated array to listbox..these are lot of steps to add one line to listbox/textbox...
Any help would be appreciated.
Thanks.
CVI 2010
LabVIEW 2011 SP1
Vision Builder AI 2011 SP1Actually, the way to append an item to a list box is to create an Item Names property node for the list box. Then you can use Insert Into Array, and write to another property node for Item Names.
Message Edited by tbob on 10-03-2005 02:31 PM
- tbob
Inventor of the WORM Global
Attachments:
ListBox.PNG 3 KB -
My mouse scrolls shows each line moving up instead of moving one line at a time annoying
Since downloading firefox 3.6 when I scroll down a page it shows each line moving up instead of just moving one line up its very annoying
It could be that there is not enough memory in the printer or the print server to hold the entire document while printing. The printer gets Postscript files, which are larger than the original document. Also, if you are doing multiple copies, if you collate the pages, that takes more memory than printing each page multiple times.
-
i dont know what to say in way of clarification. when looking at a page i am forced to use the "slide" on the margin which is very sensitive on very long documents instead of the down arrow to move one line. pressing the arrow results in going to the bottom and you cant return using the arrow.
The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/ -
The title says it all, I'm not really sure if this is the proper place to post this as it's not a "bug" per se. I noticed on the list of bugs "fixed" in Firefox 10 scrolling more than one line with the arrow keys was one of them. I know a lot of people hated the one-line thing too so I'd suggest in future releases it should be a preference we can change.
You can right-click either Back or Forward button to open the tab history list.
-
Why has my hp deskjet 2050 printer and scanner suddenly slowed down and printing one line at a time
why has my hp deskjet 2050 printer and scanner suddenly slowed down and printing one line at a time
This is usually indicative of a defective print cartridge. Suspect the black is low in ink or defective. Please check all cartridges.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Can I terminate our contract one line at a time?
I am so incredibly frustrated with Verizon right now! We had 5 lines- 4 smart phones (one of which still had unlimited internet), and a regular flip phone. We wanted to put our youngest son on our plan, and upgrade flip to smart, but were trying to figure out the best options~ 1. Keep current plan, which we paid approx. $330-$370 a month for, and just get him a prepaid. 2. Upgrade to the next level, where we can have 6 lines, but we lose unlimited internet on son's phone or 3. listen to the dishonest Verizon customer service rep (who is paid on commission), and upgrade to the edge plan, where we could add the 6th line, we would lose unlimited internet, but would get 13 gigs to share between phones, and the total cost would be less than $300 a month. Obviously, we took option 3. 1st month, Verizon bill was over $400~ expected for Verizon~ make any change to your plan, your next bill is ridiculously high. Month 2~$449.86. I call to ask what the heck is going on... yup, this is our monthly bill now, and there is nothing we can do... Here is my question. Can I terminate each phone and pay the termination fee, then use the same phone for a prepaid phone? I mean, we are paying for 3 iphone 5's, and iphone 4, a droid and a commando~ I don't want to have to buy new phones on top of paying a ridiculously high early term fee...
Thanks
SheriSheri, if I am reading this right you opted for the edge program?
The cost of the plan minus the price of the device(s) purchased on the Edge program is the extra cost per month.
On the edge plan you owe the balance on the device if you terminate service. If your other devices are not on the edge program they can be used with no problems depending on the plan you select.
If you have contracts you will get hit with early termination fees, for each line still under contract.
For the Edge device you get a final invoice for the device it then is yours to do with as you please.
Like the AT&T plans where for example a family of four shares 10 GB of data for $160 plus taxes and Fees the problem is the customers forget they have an additional cost for the devices let's say $100 so that $160 plan is now $260 plus taxes and fees.
People have to ask questions and keep asking until the information can be verified.
Good Luck
Maybe you are looking for
-
Loss of sound, trouble sharing
i have a macbook and am running imovie 4. never had problems before. actually used it very recently to do some videos. now i'm working with video clips and imported still photos and i have extracted the audio. suddenly the audio is absent in the cont
-
Create a SUS purchase order locally in SRM
Hi guys we run a SRM 5.0 with SUS installed. I tried to create a PO locally as Purchaser with transaction type "SUPO SUS Purchase Order". It now says that "transaction type SUPO must not be used for object type BUS2201". Does my error belong to (1) I
-
Extracting pages | Learn Acrobat XI | Adobe TV
In this movie, Claudia McCue shows us how to extract pages from one document and save them in a separate PDF. She does this two different ways; one uses the Page Thumbnails panel dropdown menu and the second is by selecting the specific page thumbnai
-
Stored procedure in Oracle 8.1.7.0
HI, my oracle version is 8.1.7.0 I've created this stored procedure: CREATE OR REPLACE procedure CREATE_TAB1 IS SVUOTA VARCHAR2(64); PRAGMA AUTONOMOUS_TRANSACTION; err_num number; err_msg varchar2(100); BEGIN SVUOTA := 'TRUNCATE TABLE TAB1 REUSE STOR
-
Start both MacBook & External Display simultaneously?
Hi there, Was wondering if someone could provide some advice. I have a 13.3 MacBook connected to a very old non-widescreen display (plan to update soon!) - The problem I have is that while I can connect the display to my MacBook once the MacBook is b