Upgrade options for my new old Power Mac G4?

So I just got a free Power Mac G4 MDD. It has dual G4 1.25 GHz cpus, 2 GB RAM, 4x80 GB Seagate Cheetah SCSI hard drives in RAID 0, Airport wireless, 2 Super drives, and a Geforce4 Ti 4600 GPU. It has a fresh install of Tiger, and I am wondering what upgrades are available for it; it feels smooth most of the time, but high res videos on youtube are pretty much unwatchable. I have done some research of my own, and I found a few pci-x cards that look useful, like for SATA ports, Firewire 800, usb 2.0, etc. I have also read about cpu upgrades up to 1.8 Ghz, and that it is possible to flash a pc graphics card to work on a mac, but all of the examples I've seen are with PCI Express graphics cards. Should I get the Sata card and use faster hard drives? Is there, in your experience, a good graphics card upgrade for my PowerMac? Is there a CPU upgrade faster the 1.42 GHz that I can get, and where? And what about overclocking my cpu? I got this for free, and I am willing to pay a few hundred dollars to upgrade it. I know its pretty old, but fixing up and upgrading old computers to there best is a hobby of mine.

Should I get the Sata card and use faster hard drives?
PCI or PCI-X controllers provide for good perfomance with SATA drives.
The Firmtek Seritek cards have excellent compatibility, are bootable to connected drives, and will help provide performance beyond that possible with ATA drives on the native bus.
BTW, PCI-X cards are backwards compatible to PCI.
Is there, in your experience, a good graphics card upgrade for my PowerMac?
The three best options for a MDD are a flashed Radeon 9800 XT, Radeon X800XT (flashed FireGL X3) or flashed Geforce 7800 GS.
If one upgrades to Leopard, the FireGL/X800 is best.
In Tiger, the 7800 GS is best.
Is there a CPU upgrade faster the 1.42 GHz that I can get, and where?
Sonnet used to make one (MDX Duet), but you'll be hard pressed to find one on eBay or such.
IMHO, overclocking the 1.42 GHz processor to 1.58 GHz provides for a much more powerful machine.
Heck, even at 1.42 GHz, the 7445 processor and 2 MB L3 cache are stronger, overall, than the 7447 processor used in the MDX Duet.
And what about overclocking my cpu?
http://bitsandpieces.info/Multipliers.htm
OC'ing the MDD adds to heat issues.
There are some great mods like this one:
http://www.s155158671.websitehome.co.uk/watercoolyourmdd.html

Similar Messages

How do I transfer files from my old Power Mac Mini to my new one?

Oops...thought I had to write the question in the above spot.
Question: How do I transfer my files from my old Power Mac Mini to my new Intel based Mac Mini? From what I read, I needed a 40/80 cable, which I bought. However, I only have one monitor.
(I tried to copy files onto a blank dvd, but it wouldn't format and kept spitting the disk out) (?)
Anna

Anna,
Here is a discussion on the same topic that will save some typing:
https://discussions.apple.com/message/15374867#15374867
Jolly makes a good point about screen sharing.
I prefer the firewire approach just because I have had more problems with ethernet connections than with firewire connections. Both options work, firewire has just been easier for me when the operating system on the machines are different. Read the options and post back if you would like additional coaching.
Ji~m

Have old Power Mac G4, need advice on upgrading the operating system

Hello. Glad I found this forum. Wish it was prominently advertized on the Apple home page. Anyway, I have an old Power Mac G4 running OS X 10.0.4. Well, actually, I've always run it in OS 9.2. In fact recently I started playing with it again and switched it to OS X 10.0.4 and it seems to be unstable. The display dissappears after a while running. The machine is not off, just no display. Hitting the smaller reboot button brings it back up, only to have it repeat the failure. But that's not really my question. I want to use this machine as a Skype phone and for iMovie in OS 9.2. Skype is only available for OS X 10.3.9 and later OS's. So, if it's not a major hassle and expense, I want to upgrade to OS X 10.3.9 or later. That's where I need some advice. Having never attempted such a project, I'd like as much feedback as I can get about what to expect going in. Here are some questions:
1. Will I still be able to run OS 9.2 (either concurrently or by switching the startup disk when needed) if I upgrade to OS X 10.3.9 or later?
2. Will this instability with OS X 10.0.4 dissappear if I uprgade?
3. Where can I find the appropriate upgrade software?
4. Can I jump from OS X 10.0.4 to a version as late as OS X 10.3.9 without any intermediate steps, and without creating all kinds of little inconsistencies that I will have to chase down to make it work right in day to day use.
If I get answers to all that, I'll be blown away by the spirit of helpfulness on this forum! But anything you can offer will be greatly appreciated. I don't really want to do anything fancy with the machine, just Skype, hopefully iMovie and maybe stream some TV programs if all goes well. Thanks for reading through all this and for anything you can offer.
Power Mac G4
Hard drive: 38.34 GB
Built-in Memory: 384 MB
OS 9.2 & OS X 10.0.4

appleysmappley:
Cornelius, clearly you know your Macs!
Thank you. I have great mentors, one of whom is Kappy.
My next question about OS 9 is, if I have to wipe the hard drive, will the Panther retail box I buy include OS 9 or will I need to somehow add it from the original software pack I have after installing Panther?
You have options.
1. You can choose to install Panther using the Archive and Install option, which will leave OS 9 untouched. However, since you currently have OS X 10.0.4 on your drive, I think a complete reformat, erase and reinstall is advisable.
2. You can copy your OS 9 Systems Folder, OS 9 Applications Folder and any data you have have to a USB jump drive, or CD or an external Hard Disk Drive and restore it after Panther or Tiger is installed.
3. You can install OS 9 from scratch. We will give you step by step directions for doing it.
I'm assuming I can't use the disks that came with my laptop to updgrade my Power Mac G4, right?
It may or may not work. However, the Apple Software License Agreement stipulates that unless you have a multiple user license, the OS can only be installed on one computer at a time.
I'm concerned about OS 9 is because I want to be able to run the OS 9 iMovie that I have on the Power Mac G4 now.
If you reinstall OS 9, that should be included. OS X also has iMovie, although I am not sure if it is included in the Retail Version. You can also purchase iLife which will include iMovie and other apps.
What are the potential pitfalls of buying a copy on eBay? What do I need to know to "know what I'm looking for"? What questions should I ask?
The pitfalls are many. There is fraud on eBay (elsewhere, too, I guess), so you want to be sure you get a reputable seller. You want to be sure that you are getting the Full Retail Version, not computer specific gray disks or upgrade installers. You should ask the seller, in addition, whether you can return the merchandise for a refund if it does not work on your computer. Most reputable sellers want to satisfy their buyers and their business depends on their reputation.
Kappy said I would need more RAM (I have 384 MB). Where would you recommend buying that?
Your computer will support a total of 1.5 GB of PC-133 3.3v, unbuffered, 8-byte, non-parity 168-pin SDRAM in 3 slots. You currently have a 128 MB and 256 MB modules in two slots. You can remove one or both and add two or three 512 MB modules. Check out the list of vendors and prices at ramseeker
Good luck.
cornelius

Brand-New Empty Power Mac G5 Tower Cases for Sale???!!!

Have you heard that brand-new empty Power Mac G5 tower cases are available for sale? They are available in several cities in China for about 90 USD:
http://img5.pcpop.com/ArticleImages/500x375/0/337/000337034.jpg
http://img5.pcpop.com/ArticleImages/500x375/0/337/000337030.jpg
I am shocked~

By the time you pay shipping from China it will cost as much or more than purchased in the USA.
BTW
I get my G5 cases from 1-800-WE-FIX-MACS via eBay auction and generally pay $50.00 + $40.00 shipping = $90.00

Upgrade Options for ENVY dv6-7366ez

Hello.
I bought an ENVY dv6-7366ez notebook and I like to know the upgrade options for it (GPU, CPU, Display, Optical Drive). Here in Hungary I tried to contact with the official Hungarian HP support but they didn't have any information.... They said that the HP HQ don't share any information about it with them, but as i saw that's not true because i see many topics in the forum... Just not for my new/old notebook... So like to know which CPUs and GPUs are compatible with my notebook and what are the display and optical drive upgrade possibilities.
Product Number: D5m07EA#UUZ
BIOS Type   Insyde EFI
BIOS Version   F.29
System BIOS Date   10/03/2013
Video BIOS Date   11/18/11

Hi,
The following link shows specs of your machine:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03666370
and the following link shows manuals, guides for your machine:
   http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&product=5361167
Page #1 of manusl #1 shows a list of CPU's supported.
You can upgrade RAM to 16Gb and MAY BE able to upgrade CPU. Other than that you may consider buying a new machine, could be cheaper.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I connect/network my powerbook to my old power Mac?

I have an "old" Power Mac 500 MHZ G4, that I bought in 2000. It works okay aside from being slow.
I recently bought a new Power Book 1.67 GhZ.
I tried connecting the two computers via firewire, thinking I would be able to see each computer as an icon on the desktop the same way I see my external harddrives when I connect them up.
I'm hoping I would be able to manipulate things in my power mac using my keyboard on my laptop. I guess the main plan is to use the powermac as an external drive.
They don't seem to recognize each other. Is there anything I can do to make my computers get along? Did I pick the right category? Is this actually networking? Something tells me it should be easier than all this. Help appreciated!
Oh yeah! The Power Mac 500mhz, is running OS X 3.7, the Power Book is running OSX 4.8.

If you aren't already doing so, start up one computer with the T key held down, or use these instructions to set up a FireWire network.
(18936)

Where can I get rid of an old Power Mac G3 Beige?

Where is the best place to get rid of an old Power Mac G3 Beige? Are there sites out there where Mac enthusiasts would buy it or its part? It has no hard drive. Also have the Multiple Scan 720 Display Monitor.

Glen.. I'm looking for some 256 sticks of RAM - PC-66 or 100 will do.. and if you want to move that CPU card - is it a Sonnet ZIF?
I have a Yosemite blue and white G3 that's living here while it's owner gets his living situation sorted out.. it was in rough shape as it sat in a few inches of water and is a bit corroded but not so much it's dead.
I'm cobbling it into a bit more stable, modern state for him so his 11 year old daughter can use it with her iPod. So far I have an 80GB hard drive and a Lite-on CD burner installed. I don't have much in the way of $$ right now, but can pay postage, if you want to part bits out. I can mail you a G3/266 processor to swap it out if you still want to have a working machine to part with.
I was going to use the bits from my beige for the Yosemite, but the Quicksilver that landed on my door turned out to be a boat anchor, so I bit the bullet and swapped out a power supply and got the G3 working again as a music server.
Am still on the hunt for freebie, useable parts..
Deb.

GeForce 7800 GTX... the best card for a PCIe G5 Power Mac?

I have started out on the rocky road to upgrade the graphics card on my Power Mac G5 Quad 2.5GHz running Mac OS X 10.5.8. The standard card, a GeForce 6600, does not do justice to this wonderful computer, and struggles with any serious video work.
The first step is easy – deciding on the best card. A little Googling shows that the GeForce 7800 GTX wins hands down over the competition.
The next needs patience – these cards appear from time to time on eBay; I will need a 512 MB PCI-e version (not 256 MB) as I am running 10.5.
I've waited a month or two, put in a winning bid and the card has arrived. Now all I need is the code to flash the ROM to make it work in myG5. Not so fast! I'll need a 128kb ROM chip! The idea of using a soldering iron terrifies me, so I'll have to find someone, who does this sort of thing for a living, to remove the 64kb ROM from my 7800 GTX and solder on a 128kb ROM.
But what's is the right spec/manufacturer/supplier for the 128 kb ROM?
If I am lucky my friend with the soldering iron may know. If not, I'm stuck. I've not been able to find this information anywhere on the Internet.
Now all I need is the right code for the ROM. It seems that there are two versions that people have used: one, which seems quite common, is lightly edited Quadro FX 4500 ROM code which does not use the full power of the 7800 GTX, which after flashing reports itself as a FX 4500; the other, which seems to be as rare as gold dust, has been fine-tuned to use the 7800 GTXs full potential. Cards flashed with this version report correctly as 7800 GTX. I really want this optimised code, but neither version is available from any of the usual places.
Can anyone please help?

I've waited a month or two, put in a winning bid and the card has arrived. Now all I need is the code to flash the ROM to make it work in my G5. Not so fast! I'll need a 128kb ROM chip! The idea of using a soldering iron terrifies me, so I'll have to find someone, who does this sort of thing for a living, to remove the 64kb ROM from my 7800 GTX and solder on a 128kb ROM.
Many thanks to japamac, who kindly sent me an e-mail which put me on the right track re finding the ROM code, editing it and flashing.
I also now know that I no longer have to worry about soldering ROM chips. Yippee! The 7800 GTX code has been 'shrunk' to fit on a 64kb ROM.

HT2476 Why when clicking the right mouse button for my external hard drive there is no option for "create new folder"?

Hi there. I'm having a problem with my external hard drive. Actually with only one of them (others seem to be ok...). The problem is that when clicking the right mouse button (or using other ways to do the same), in the drop-down list there isn't an option for "create new folder". Please, can anyone help with this issue?

The drive is NTFS formated. Most probably that's the reason, but there is some info on the drive which I wouldn't like to loose. If there is a way to re-format the drive and save the files, that would be great. If there isn't such a way, then please, tell me how to re-format it. But bear in mind as well that I'm using Parellels and the drive is to be used in Mac and Win modes, both. Just to add some more info: my other drive is FAT32 formated and all seems to go well with it.

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the n

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!

Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel

I was cleaning up the desk top on an old power mac G4 when I restarted an got a circle with slash and the small spinning wheel under it nothing else

I received an old Power Mac G4 Quick Silver and was cleaning the desk top. When I restarted all I got was a circle with a slash and the small spinning wheel under it...nothing else

I suppose 3.6V PRAM battery is run out , so you'd better replace it.
Or resetting PRAM could solve the problem.
http://support.apple.com/kb/HT1379?viewlocale=en_US

What are the best options for running windows on a Mac Pro

what are the best options for running windows on a Mac Pro

For gaming and other CPU intensive stuff: Boot Camp – https://www.apple.com/support/bootcamp/
For the rest: any virtualization software (Parallels/Vmware Fusion/VirtualBox)

Cheapest option for someone new to mac wanting to use xcode and try develop

Hi
Apologies if this is in wrong location but couldnt find a general section
I havent used mac before, looking to find cheapest option to get in to the mac World and try my hand with xcode / develop the likes of an app for iphone for fun
Had found a imac5 1 but when I researched further it would appear that I might not be able to use this for latest version of xcode and therefore wouldnt suit my need. Shame as I think I could have got it for €300
Am I correct - in that its not suitable?
Any suggestions on what else would be suitable or where I could start?
I couldnt afford to spend €1,000 or more on a new mac whether it was desktop or laptop etc.
I want to get something thats useable (not from the dark ages) but realise that I may have to go back at least a few years thus the reason I was looking at the imac5,1
Thanks for your time. Any help advise etc would be appreciated.

The latest XCode requires OSX Lion. That requires:
Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of RAM
Mac OS X 10.6.6 or later with the Mac App Store installed
At least 4GB of additional disk space to accommodate the download, but more is obviously recommended
Thus, assuming that whan you said imac5 you were referring to an iMac with an Power PC G5 processor you are right i that that is not compatible.
There are some Mac with an Intel Core sSolo and just Intel Core Duo processor that will not work with the latest XCode.
I would look for a Mac Mini 2007 or later since those meed the XCode requirements

Any "discounted upgrade" option for new Acrobat 9 buyers when X is released?

I'm looking at buying Acrobat and as of right now, I notice that Adobe's website is only promoting the pre-ordering of version X (I can't even find an option to buy version 9 on here but can find it on Amazon and stuff).
I need to purchase a version of the software ASAP, but I'm just wondering: If I were to buy 9 now (right before release of X) is Adobe going to have an upgrade option that will allow me to upgrade to X without having to pay full price for the software? I'm looking at getting the highest level option (the $800 one).
Hopefully I posted this in the right section of the forum...
Thanks.

Thank you, George.
So, in other words, that means if I buy now through Amazon, I won't get the upgrade option (since it's a 3rd part site), despite the new release announcement, correct?
Is there a link anywhere on Adobe to buy version 9 now so I do qualify for the X upgrade? I can't seem to find one...

Please help me upgrade my new/used Power Mac G5

I recently receieved a used Power Mac G5, Model Identifier: PowerMac7.2.
The Specs are:
Apple Mac G5 Tower. G5 1.6gHz Processor, 1 Gig DDR Ram, SATA 80 GiG Hard Drive, DVD-R Optical Drive, Nvidia AGP FX 5200 64 Bit Video Card. This unit operates on Leopard 10.5 OS
Can someone who knows Macs well help me with software and hardware. What is the best set up I can have to make my G5 fast, powerful, and up-to-date without buying a new one.
I have a mac book pro. I just want to fix up this older G5. Thanks for reading this, and I would really appreciate your input.

Highest OS you should use is 10.5...Leopard. RAM...between 4GB and 8GB. It will run FCP 7...the entire suite...but it will not convert anything to ProRes. It doesn't have the power. It won't be able to deal with most (talking 80-90%) of the new camera formats (AVCintra, AVCHD, H.264, RED).
Sorry, but that machine is 6 years out of date. Actually...1.6Ghz processor...8 years out of date. There is no way it will be "up to date." Your MacBook Pro will run CIRCLES around it.

Upgrade options for my new old Power Mac G4?

Similar Messages

Maybe you are looking for