Upgrade Oracle database 11gR1 to 11gR2 in EBS R12

Hello all,
We are planning to upgrade our 12.1.3 ebs database 11gR1(11.1.0.7) to 11gR2. What are the broad level steps we need to follow. Or any document id is available? Please help

Oracle E-Business Suite 12.1.3 is available as a release update pack (RUP) which need to be applied on top of 12.1.x instance.
Oracle E-Business Suite Release 12.1.3 Now Available
http://blogs.oracle.com/stevenChan/2010/08/ebs_1213_available.html
. So do we not need to apply patch 9062910 for 12.1.3?What is the error?
Thanks,
Hussein

Similar Messages

How to Migrate 11gr1 to 11gr2 in EBS r12.1.2

Hi,
We have installed Oracle EBS Realease 12.1.1 on OEL 64 bit. After that we have applied patch to 12.1.2.
How we can migrate our database from 11g R1 (11.1.0.7) to *11g R2* (11.2.0.1). ?
Thanks.

Hi;
I also suggest please check below notes:
Database Documentation Resources for EBS Release 11i and R12 [ID 1072409.1]
Oracle Applications Release 12 with Oracle 11g Release 2 [ID 881506.1]
General Notes For E-Business Suite Release 12 [ID 986673.1]
Regard
Helios

Upgrade Oracle database 10.2.1.0 to 11gR2 without upgrading APEX

Hi,
How can we upgrade Oracle database 10.2.1.0 to 11gR2 without upgrading APEX? We currently have APEX 3.0 running in our 10g databases and don't want these APEX schemas to be upgraded to APEX 3.2.x during the database upgrade. We'll want to test everything before upgrading these APEX schemas manually to 4.1.1 later.
Thanks.
Andy

Pretty sure running the 11gR2 catalog upgrade won't touch your apex. Can't speak for using the upgrade utility, never used it.
Windows? Or *nix hosts? On windows fixing the oradim setups are more of challenge.

How to Upgrade 11.1.0.7 to 11gR2 in EBS R12.1

Hi Experts
I wanna upgrade the 11.1.0.7 to 11gR2 in EBS R12.1 which is on a single node architecture.
I am not sure about the Patches that i need to apply on Apps & DB tier even after going through couple of metalink note like 1058763.1 &
blog http://chavalis.blogspot.in/2012/10/upgrading-r12-11-vision-database.html
Please see the following Sequence of steps for the Upgrade ... which m not sure of .. Please confirm these steps.
*The current DB version is : 11.1.0.7 & EBS R12 version[VISION DB Instance) = 12.1.1*
*Plateform : RHEL 6 64 bit*
According to metalink ID : 1058763.1.. the Sequence would be by applying the following Patches
*9062910 - Interoperability Patch For R12.1.1 On 11.2 RDBMS ( The downloading options given for this Patch is Linuxx86 However the Current server is RHEL 64 bit*
*I am not sure if its compatible for linux 64 bit arch ? Please confirm)*
8919489 - Oracle E-Business Suite Techstack 12.1.3 Product Release Update Pack
9868229 - CST_LAYER_ACTUAL_COST_DTLS_V Becomes Invalid After 11.2.0.2 Upgrade
10163753 - BIV_B_AGE_H_SUM_MV Fails During Index Creation
11071569 - ADBLDXML Fails On Windows Server 2008 R2 64 Bit
9738085 - Sourcing CMD File On Windows Exits With 1
9852070 - ADBLDXML And AUTOCONFIG Complete With JAVA.LANG.UNSATISFIEDLINKERROR
12686610 - R12 And R121 Backport Request For Bug Fix 12336911
6400501 - Not Able To Compile Forms Library With 11G DB (patch for 10.1.2 forms ORACLE_HOME)
   DO i need to apply the following patches to the 11.1.0.7 database ORACLE_HOME ??
7695070 - Change In The Timezone File Format
13417321 - DST 18 : Half Yearly DST Patches, MAY 2012
14112098 - DST Changes For DSTV18 (TZDATA2012C) - Need OJVM Fix
7695070 - Change In The Timezone File Format ( Not sure of .... Please confirm)
And after that
Download & Install the 11.2.0.3 x86_64 software (files 1of7.zip and 2of7.zip of patch 10404530) is that fine ?
Thanks
MZ

MZ_AppsDBA wrote:
Hi Experts
I wanna upgrade the 11.1.0.7 to 11gR2 in EBS R12.1 which is on a single node architecture.
I am not sure about the Patches that i need to apply on Apps & DB tier even after going through couple of metalink note like 1058763.1 &
blog http://chavalis.blogspot.in/2012/10/upgrading-r12-11-vision-database.html
Please see the following Sequence of steps for the Upgrade ... which m not sure of .. Please confirm these steps.
*The current DB version is : 11.1.0.7 & EBS R12 version[VISION DB Instance) = 12.1.1*
*Plateform : RHEL 6 64 bit*
According to metalink ID : 1058763.1.. the Sequence would be by applying the following Patches
*9062910 - Interoperability Patch For R12.1.1 On 11.2 RDBMS ( The downloading options given for this Patch is Linuxx86 However the Current server is RHEL 64 bit*
*I am not sure if its compatible for linux 64 bit arch ? Please confirm)*
EBS is a 32-bit application - you need to apply the 32-bit version of the patch.> 8919489 - Oracle E-Business Suite Techstack 12.1.3 Product Release Update Pack> 9868229 - CST_LAYER_ACTUAL_COST_DTLS_V Becomes Invalid After 11.2.0.2 Upgrade> 10163753 - BIV_B_AGE_H_SUM_MV Fails During Index Creation> 11071569 - ADBLDXML Fails On Windows Server 2008 R2 64 Bit > 9738085 - Sourcing CMD File On Windows Exits With 1> 9852070 - ADBLDXML And AUTOCONFIG Complete With JAVA.LANG.UNSATISFIEDLINKERROR> 12686610 - R12 And R121 Backport Request For Bug Fix 12336911> 6400501 - Not Able To Compile Forms Library With 11G DB (patch for 10.1.2 forms ORACLE_HOME)>Correct - apply all of the above. >    DO i need to apply the following patches to the 11.1.0.7 database ORACLE_HOME ??> > 7695070 - Change In The Timezone File Format> > 13417321 - DST 18 : Half Yearly DST Patches, MAY 2012> 14112098 - DST Changes For DSTV18 (TZDATA2012C) - Need OJVM Fix >Yes - pl see instructions in MOS Doc 563019.1 - this is identified in "Daylight Saving Changes" section of 1058763.1> 7695070 - Change In The Timezone File Format ( Not sure of .... Please confirm)>You have to apply the 10.1.0.5 version of this patch to the 10.1.2 and 10.1.3 HOMEs - see MOS Doc 563091.1    >   And after that > Download & Install the 11.2.0.3 x86_64 software (files 1of7.zip and 2of7.zip of patch 10404530) is that fine ?> >Correct - you will also need to download and install the Examples CD as noted in my blog post. > Thanks> MZHTHSrini

Upgrade Oracle Database Express Edition to (10.2.0.4 OR 11g) Release

hello
I plan to install the SOA, but need more than the database version 10.2.0.4. How to upgrade Oracle Database Express Edition to (10.2.0.4 OR 11g) Release?Thank you!!

Hi,
I plan to install the SOA, but need more than the database version 10.2.0.4. How to upgrade Oracle Database Express Edition to (10.2.0.4 OR 11g) Release?Thank you!!My i know the current version of your database?
Refer:
*316889.1 -- Complete Checklist for Manual Upgrades to 10gR2*
*429825.1 -- Complete Checklist for Manual Upgrades to 11gR1*
*837570.1 -- Complete Checklist for Manual Upgrades to 11gR2*
thanks,
X A H E E R

Steps to upgrade oracle database from11.2.0.1 to 11.2.0.3 on Windows 2003 3

Steps to upgrade oracle database from11.2.0.1 to 11.2.0.3 on Windows 2003 3

Hi,
Upgrade steps
1. Install 11.2.0.3.0 rdbms software
11.2.0.3 patch set is a full release.
Beginning with the release 11.2.0.3 patch set, you have two ways to apply a patch set
i)Out-of-place upgrade (Recommended) -- 11.2.0.3 will be installed as standalone at another location. So there is no impact on source oracle home and also DB upgrade will take less time
See Note 1276368.1 : Complete checklist for out-of-place manual upgrade from 11.2.0.1 to 11.2.0.2 , it is applicable for 11.2.0.3 as well
ii)in-place upgrade - 11.2.0.3 will be installed on top of 11.2 installation, So source oracle home will be replaced, Downtime will be high comparing out of place upgrade
for more info, Please refer to
Note 1189783.1 Important Changes to Oracle Database Patch Sets Starting With 11.2.0.2
11.2.0.3.0 software can be downloaded from My Oracle support: patch 10404530
https://updates.oracle.com/download/10404530.html
Please select your platform before downloading (Click on "Platform or Language" drop down menu)
if the platform name contains (32-bit) then it's 32-bit 11.2.0.3 client version
To install 11.2.0.3, you must download both p10404530_112020_<platform>_1of7.zip
and p10404530_112030_<platform>_2of7.zip
<platform> = your platform( ie for linux x86, download p10404530_112030_LINUX_1of7.zip and
p10098816_112030_LINUX_2of7.zip )
Note 1194734.1 : Where do I find that on My Oracle Support (MOS) [Video]
Note 549617.1 : How To Verify The Integrity Of A Patch/Software Download? [Video]
Note 169706.1 : Oracle Database Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2)
2) Finish the post installation steps as per the patchset README (readme.html).
3) upgrade the database to 11.2.0.3
Kindly ensure source database has all Valid DB components(dba_registry) and there are no invalid sys/system objects
Note 419550.1 : Different Upgrade Methods For Upgrading Your Database
Note 837570.1 : Complete Checklist for Manual Upgrades to 11gR2 (applicable to 11.2.0.3)
Note.870814.1 : Complete checklist to upgrade the database to 11gR2 using DBUA (applicable to 11.2.0.3)
4) After db upgrade, you can apply PSU patch of 11.2.0.3, it will give latest bug fixes of 11.2.0.3
The latest PSU patch is (Reference: Quick Reference To Patch Numbers For Database PSU, CPU And Bundle Patches (Doc ID 1454618.1))
14727310 (11.2.0.3.5) Jan 2013 DATABASE 11.2.0.3
Patch readme file has Installation instructions.
Oracle Database Upgrade Path Reference List (Doc ID 730365.1)
Thanks,
Krishna

Steps to upgrade Oracle database from 11.2.0.3.8 to 11.2.0.4.0

Hi Support,
Could anyone please provide the steps to upgrade Oracle Database EE from 11.2.0.3.8 to 11.2.0.4.0.
Thanks
Imtiyaz

You will need to install 11.2.0.4 into a new ORACLE_HOME, apply the latest 11.2.0.4 PSU patch to the new ORACLE_HOME (see MOS Doc 1454618.1) and then follow the steps in the Upgrade Guide
http://docs.oracle.com/cd/E11882_01/server.112/e23633/upgrade.htm#UPGRD003
see MOS Doc 1189783.1

Oracle Database 11gR1 Enterprise Manager Console Cannot Display in Browser

Folks,
Hello. I am running Oracle Database 11gR1 with Operaing System Oracle Linux 5. I have some issues regarding EM connects with the Database Server as below:
First, the default listener is LISTENER with standard port number 1521 and protocol TCP/IP.
Its corresponding service naming S1 is with port 1521 and protocol TCP/IP and hostname localhost.localdomain.
I run this listener in the following way:
Step 1: [user@localhost bin]./lsnrctl start LISTENER (This command runs sucessfully.)
Step 2: [user@localhost bin] ./sqlplus SYS/SYS as sysdba (This command starts sqlplus sucessfully.)
Step 3: [user@localhost sqldeveloper] ./sqldeveloper.sh (This command invokes SQL Developer sucessfully.)
But when start Enterprise Manager Console, it cannot connect with the Database. I do it in this way:
[user@localhost bin] ./emctl start dbconsole
The above command's output is:
https://localhost.localdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ... ...
When open the link https://localhost.localdomain:1158/em/console/aboutApplication in browser, this message comes up:
The connection to localhost.localdomain: 1158 cannot be established.
Thus, I add Port Number 1158 into both LISTENER and Service Naming S1. I run ./emctl start dbconsole again and get this message:
The connection to localhost.localdomain:1158 was interrupted while the page was loading.
In order to solve the above issue, I create another listener LISTENER2 and another Service Naming S2 with Port Number 1158 and protocol TCP/IP because
in my point of view, each listener only can have one Port Number(1521 or 1158) and its corresponding Service Naming (S1 or S2) need to have the same Port Number and Protocol (TCP/IP).
But when I run [user@localhost bin]./lsnrctl start LISTENER2, this message comes up: the listener supports no service.
From the message, it seems that LISTENER2 cannot work with its corresponding Service Naming S2 with Port 1158.
EM with Port 1158 cannot display in Browser.
My questions are :
First, Is there any relationship needed to be established between listener(LISTENER2) and Service Naming(S2) in order to display EM in Browser ?
Second, how do folks display EM in browser ?
Thanks.

Folks,
Hello. Thanks a lot for replying. I do the following command: [user@localhost bin]$ wget http://localhost.localdomain:1158/em
The command returns the message:
--11:36:33-- http://localhost.localdomain:1158/em
Resolving localhost.localdomain... 127.0.0.1
Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `em'
[ <=> ] 7 --.-K/s in 0.002s
11:36:33 (4.15 KB/s) - Read error at byte 7 (Connection reset by peer).Retrying.
--11:36:34-- (try: 2) http://localhost.localdomain:1158/em
Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `em.1'
100%[=================================================================================================================>] 7 --.-K/s in 0s
11:36:34 (16.8 KB/s) - Read error at byte 7 (Connection reset by peer).Retrying.
The above message repeats again and again until finally returns the following message:
11:39:02 (40.2 KB/s) - Read error at byte 7 (Connection reset by peer).Giving up.
In browser, http://localhost.localdomain:1158/em cannot display and pop up a Windows with the message: You have chosen to open whicn is BIN file from http://localhost.localdomain:1158 What sholud FireFox do with this file ? Save to Disk ?
My question is:
I don't know how to display http://localhost.localdomain:1158/em in Browser. How to solve the issue ?
Thanks.

Where to run SQL statements in Oracle Database 11gR1 ?

Folks,
Hello. I have just installed Oracle Database 11gR1 and login to Database Control page. There are 4 tabs on the top: Database, Setup, Preference, Help and Logout.
I just create a table "table1" in "Database" tap. But I don't see anywhere to run SQL statement such as Select, Insert, Update.
Can any folk tell me where to run SQL statements in Oracle Database 11gR1 ?
Or
Can any folk provide a User Manual for Oracle DB 11gR1 ?

You can run from a terminal or install an SQL client and connect from there.
http://www.articlesbase.com/databases-articles/how-to-install-oracle-11g-client-1793770.html
Best Regards
mseberg
Assuming you have an oracle OS user on Linux you can try typing sqlplus at you OS command prompt. Generally you will have a .bash_profile with setting like this:
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/11.2.0
#export DISPLAY=localhost:0.0
export TZ=CST6CDT
export ORACLE_SID=ORCL
export ORACLE_TERM=xterm
#export TNS_ADMIN= Set if sqlnet.ora, tnsnames.ora, etc. are not in $ORACLE_HOME/network/admin
export NLS_LANG=AMERICAN;
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
export LD_LIBRARY_PATH
# Set shell search paths
PATH=/usr/sbin:$PATH; export PATH
export PATH=$PATH:$ORACLE_HOME/bin
# CLASSPATH:
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
CLASSPATH=$CLASSPATH:$ORACLE_HOME/network/jlib
export EDITOR=vi
set -o vi
PS1='$PWD:$ORACLE_SID >'Edited by: mseberg on Jul 11, 2011 3:18 PM

Upgrade oracle database 11.2.0.1.0 to 11.2.0.2.3

We are planning to upgrade oracle database 11.2.0.1.0 to 11.2.0.2.3.My CRS is running g on 11.2.0.1.0 .Can anybody give me idea if I have to upgrade CRS from 11.2.0.1.0 to new version also .
Below this oracle article confusing me
Oracle Cluster ware - ASM - Database Version Compatibility [ID 337737.1]
crsctl query crs softwareversion
Oracle Clusterware version on node is [11.2.0.1.0]
Thanks
Rajiv

Can anybody give me idea if I have to upgrade CRS from 11.2.0.1.0 to new version also .yes,we've have to upgrade the grid software.
http://docs.oracle.com/cd/E11882_01/install.112/e17212/procstop.htm
Things to Consider Before Upgrading to 11.2.0.2 Grid Infrastructure/ASM [ID 1312225.1]

Upgrading oracle database 10.2.0.1 to 10.2.0.4 in windows platform

i want to upgrading oracle database 10.2.0.1 to 10.2.0.4 in windows platform.so that i can install oracle vault 10.2.0.4
could anyone help

i got the patch and upgraded to 10.2.0.4
but while connecting to database i am getting error
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Jun 25 22:31:54 2008
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> connect sys/sys@orcl as sysdba
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
while submitting the TNSPING command....
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Jun 25 22:31:54 2008
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> connect sys/sys@orcl as sysdba
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
E:\Documents and Settings\User>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 10.2.0.4.0 - Production on 25-JUN-2
008 22:33:03
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
I:\oracle\product\10.2.0\db_2\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = ZAKI)(PO
RT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
OK (20 msec)

Upgrade Oracle Database in Oracle Fail Safe configuration.

Dear All,
I usually upgrade Oracle Database (10g, 10g r2, 11g, 11g r2) in stand alone configuration without problems.
Now, I will must upgrade one database from 11g to 11g r2 in Fail Safe configuration.
Please, is there some link to read before this operation ?
Many thx.

Pl see if MOS Doc 223709.1 (How to upgrade or apply a patch to the RDBMS in an Oracle Fail Safe environment) can help
HTH
Srini

Upgrade Oracle database

Hi
We have plaining to upgrade Oracle database 10g r2 32 bit Oracle database 64 bit r2 using cold backup can you provide steps ?
Thanks

Hi
A helpful reference :
How to Migrate Oracle 10.2 32bit to 10.2 64bit on Microsoft Windows (Doc ID 403522.1)
Thanks

Integrating Oracle Apex 4.0.2 with EBS R12.1.1

We could successfully integrate Oracle Apex 4.0.2 with EBS R12.1.1 with the help of http://www.oracle.com/technetwork/developer-tools/apex/apex-ebs-wp-cabot-consulting-169064.pdf.
The document says to navigate from EBS to Oracle Apex without any second login screen (works great!!), but now how do we navigate back to EBS from Oracle Apex (in same session) without any login screen again as like below
EBS User login --> EBS --> Oracle Apex --> EBS
Please help to achieve this.

Hi,
Under the Authentication scheme of your application in the Logout URL Section, give the following
wwv_flow_custom_auth_std.logout_then_go_to_url?p_args=&APP_ID.:http://xyz.ck.com:8010/OA_HTML/OA.jsp?OAFunc=OAHOMEPAGEspecify your ebiz suite url instead of http://xyz.ck.com:8010 in the above link.
so, that while pressing the Logout link in your apex, you wont be redirected to the ebiz login page again, and it will redirect to you ebiz menu home page back in the same session itself.
This will work for sure.
Good Luck!!!
Change your User handle from "805196" to a meaningful word.
Brgds,
Mini
If this answered your question, then award points and close the thread.

Oracle Database 11gR1 32-bit upgrade to 11gr2 64-bit

Hello All,
My current server is having following configuration:
OS               : RHEL 4.6 32 bit
Product         : Oracle EBS 11i
DB               : 11gR1
Target machine:
OS               : RHEL 5.8 64 bit
I want to convert my current single node EBS 11i to multi-node (two node) architecture. We have to migrate our 11gR1 over 64 bit machine.
I was trying to create create a 32 bit instance over new target server through rapid clone. But it is not supported to install 32 bit 11g over 64 bit OS, so I am now taking new path to do the same, trying to upgrade 11gR1 32 bit database directly to 11gr2 64 bit. Please suggest me appropriate procedure to perform it. Any Oracle Document over the same would be wonderful. I tried to search over Metalink but with no success.
Kindly share your experience if anyone here performed the same or similar.
Regards
RanjanS

You can get 11gR1 64-bit download this way:
Previous Database Release Software
Oracle Database 10.2 and 11.1 are no longer available for download. The software is available as a media or FTP request for those customers who own a valid Oracle Database product license for any edition.
To request access to these releases, follow the instructions in Oracle Support Document 1071023.1 (Requesting Physical Shipment or Download URL for Software Media) from My Oracle Support.
NOTE: for Oracle Database 10.2, you should request 10.2.0.1 even if you want to install a later patch set. Once you install 10.2.0.1 you can then apply any 10.2 patch set. Similarly, for 11.1 request 11.1.0.6 which must be applied before installing 11.1.0.7. Patch sets can be downloaded from the Patches and Updates tab on My Oracle Support.
And about direct upgrade I have done that successfully for minor versions for example 11.1.0.6 to 11.1.0.7 so that might be possible also for 11.1. to 11.2 .

Upgrade Oracle database 11gR1 to 11gR2 in EBS R12

Similar Messages

Maybe you are looking for