Upgrade oracle RAC 10.2.0.1 to 10.2.0.4 software only without database

I want to upgrade oracle RAC 10.2.0.1 to 10.2.0.4 software only without database.
In this environment i am using OCFS file system not asm . please send me step to configure.

In other terms its called patchset application into your database home. Go to this note, assuming its linux, and do all steps until step 9 which is database upgrade.
10.2.0.4 Patch Set - Linux x86 64bit README [ID 559255.1]
Regards
Ed

Similar Messages

Upgrade oracle rac 10g r2 10.2.0.3 to 10.2.0.4

Hi all,
I goint to upgrade oracle rac 10g r2 10.2.0.3 to 10.2.0.4 on Solaris 9, in the README file(patchset) does not say that upgrade the OCR, but int he Doc ID 316889.1 to say; it is necessary to upgrade or nothing happens if Iit does not upgrade?
Mexman
Edited by: ACS on 28/10/2009 12:19 PM

Hi!
I suppose if you have a Metalink note on which explains is necessary update OCR you must follow it. Software maker always are in reason!
Chiao!

Upgrading Oracle RAC from 10.0.2.3 to 10.0.2.4 on HP-UX

Hi all,
I have to apply 10.0.2.4 patch to Oracle RAC that running on HP-UX system. I'm inexperienced with this subject. What is your suggestions and recommendations about this? Can you share the your own roadmap and your experience?
Regards,
Alper.

Hi Alper,
a good starting point for upgrades are the Oracle Upgrade Companions for 10gR2 and 11g - they cover best practices and behaviour changes:
Note.466181.1- 10g Upgrade Companion
Note.601807.1 - Oracle 11g Upgrade Companion
Kind regards
Mike

Upgrade Oracle RAC 11.1.0.6 to 11.1.0.7, on linux

Hi,
I would just know where I can find a complete guide to upgrade my Oracle RAC 11.1.0.6 to the version 11.1.0.7.
It's running on a RedHat 5 (Linux version 2.6.18-164.10.1.el5)
I think I've first to upgrade the crs, than the database, is it correct?
Thanks in advance,
Samuel

correct,
the steps are always in official guides provided with the patchsets , from My Oracle Support.
https://updates.oracle.com/Orion/Readme/process_form?aru=10498637&no_header=1#CJAEDJAJ
Mind that 11.2.0.2.0 is available.

Upgrade Oracle RAC 12.1 from 11.2.0.1 in soraris 11 Sparc

Dear All,
we have 2 node RAC 11.2.0.1 on Solaris 10, we are planning to upgrade to 4 Node RAC 12.1 in Solaris 11 Sparc 64. in new blade T5 1B.
we wont disturb current setup right now, we have to make 4 node 12.1/Solaris 11 sparc 64 bit setup & finally we will move database to new setup.
please Gurus, suggest me the correct procedure and Doc.
also i need advise on moving to the latest version 12.1 is it advisable?
Thanks & Regards.

For new setup use following MOS notes
Requirements for Installing Oracle Database 12.1 on Solaris 11 SPARC (Doc ID 1525614.1)
Some of useful OOW 2013 Docs
https://oracleus.activeevents.com/2013/connect/fileDownload/session/8B53FA85E6CE0B302AE6815A6891853C/CON8707_Wheeler.pdf

Upgrade oracle rac from 11.1.0.6 to 11.1.0.7 falure

I have a Enterprise Linux Enterprise Linux Server release 5 (Carthage), Linux linux1 2.6.18-8.el5 #1 SMP Tue Jun 5 23:25:19 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
After update working RAC 11.1.0.6 to 11.1.0.7 (2 nodes), crs services don't up on one node, on the second node it's up and work.
in $ORACLE_CRS_HOME/log/linux1/diskmon/client.log i have next lines:
Oracle Database 11g CRS Release 11.1.0.7.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
[ DISKMON] 03/25/2009 09:57:08.660 dskm_send_command: process 25155 sending command 8 to master diskmon listening on default pipe
[ DISKMON] 03/25/2009 09:57:08.661 dskm_send_command3: skgznp_connect failed with error 56815
[ DISKMON] 03/25/2009 09:57:08.661 dskm_send_command3: error 56815 at location skgznpcon6 - connect() - Permission denied
in $ORACLE_CRS_HOME/log/linux1/diskmon/diskmon.log i have next lines:
Oracle Database 11g CRS Release 11.1.0.7.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
[ DISKMON]
I/O Fencing and SKGXP HA monitoring daemon -- Version 1.0.0.0
Process 30782 started on 03/25/2009 at 09:54:30.122
[ DISKMON] 03/25/2009 09:54:30.131 dskm main: starting up
[ DISKMON]dskm_pmap: failed to open process map, errno 13
[ DISKMON] 03/25/2009 09:54:30.131 [30782:1094719808] dskm_rac_thrd_main: running
[ DISKMON] 03/25/2009 09:54:30.131 [30782:2919215216] dskm_rac_thrd_creat2: got the post from the css event handling thread
[ DISKMON] 03/25/2009 09:54:30.131 [30782:2919215216] dskm main10: skgznp_rm_pipe failed with error 56825
[ DISKMON] 03/25/2009 09:54:30.132 [30782:2919215216] dskm_main10: error 56825 at location skgznprmpipe - unlink() - Operation not permitted
[ DISKMON] 03/25/2009 09:54:30.132 [30782:2919215216] dskm main11: skgznp_create(default pipe) failed with error 56810
[ DISKMON] 03/25/2009 09:54:30.132 [30782:2919215216] dskm_main11: error 56810 at location skgznpcre3 - bind() - Address already in use
[ DISKMON]
Process 30782 exiting on 03/25/2009 at 09:54:30.132
Can anyone help me?
Thank you.
Edited by: user10934556 on Mar 25, 2009 3:00 AM

So for anyone else that stumbles across this posting. I had exactly the same issue. The problem for me was that there was a file in */tmp* called *.oracle_master_diskmon* with the wrong permissions. Removing this file allowed crs and more specifically $ORACLE_HOME/diskmon.bin to start correctly.
$ ls -ltr /tmp/.ora*
srwxr-xr-x 1 oracle oinstall 0 Dec 8 15:45 /tmp/.oracle_master_diskmon
No group write permissions on the file.
Hope this helps someone else save 8 hours digging around in the dark.

FDM is not supported on Oracle RAC? Why not?

[http://download.oracle.com/docs/cd/E12825_01/epm.111/fdm_11113_readme.pdf|http://download.oracle.com/docs/cd/E12825_01/epm.111/fdm_11113_readme.pdf] We are in the process of implementing Oracle Hyperion Financial Data Quality Management (FDM) version 11.1.1.3 as part of our Hyperion Essbase BI environment. I read over the documentation prior to building the databases, but apparently I missed an important bit of information. It seems that FDM is not supported on Oracle RAC. I just noticed this under in the "Known Issues" section of the FDM 11.1.1.3 release notes, and that was only one sentence. The release notes do not explain why this is the case.
- Does anyone know why FDM release 11.1.1.3 is not supported for Oracle RAC?
- Has this always been the case?
- Can a single node database, running on an Oracle 10.2.0.4 two node RAC environment, be used instead of building a separate, stand-alone database?
Link to readme document. The reference to RAC support, or non-support, is on page 6:
http://download.oracle.com/docs/cd/E12825_01/epm.111/fdm_11113_readme.pdf

Hi Daan,
I belive we all shoud consider http://forums.oracle.com/forums/ann.jspa?annID=939
I get upset to see people on this forum who answer the questions like *'use google'* or *'let me google it for you'* or *'use this forum filter'*
I belive it is better to help them answer a better question or if you don't like the question ignore it.
Hi user10511107,
I belive your problem is with Windows not with BI, BI just can't get windows version,
If you are on right version of windows go to MSDN and search for your error and how to fix it
ERROR: Provider Load Failure.
Regards
Nicolae

Oracle RAC summer time

Hi!
Environment: Oracle RAC 9.2.0.7 in AIX 5.3.
I have a database with the following configuration:
$ srvctl getenv database -d mydb
TZ=NFT-1DFT
Because of in Spain we have summer time, I need change it. (TZ=NFT-1DFT is only valid for winter).
I have tried:
$ srvctl setenv database -d mydb -t TZ="NFT-1DFT,M3.5.0,M10.5.0"
But it does not work:
ava.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java)
at oracle.ops.opsctl.SetenvAction.parseNameValues(SetenvAction.java:204)
at oracle.ops.opsctl.SetenvAction.executeDatabase(SetenvAction.java:80)
at oracle.ops.opsctl.Action.execute(Action.java:92)
at oracle.ops.opsctl.OPSCTLDriver.execute(OPSCTLDriver.java:223)
at oracle.ops.opsctl.OPSCTLDriver.main(OPSCTLDriver.java:121)
¿Could anybody help me?
Thanks in advance.

Unless you are on R12.1, you can't control this value. If you are on 12.1, Default Timecard Period has been added to preference Self Service Timecard Period for a Worker, where the following options are available:
Period on or after system date
Earliest Period prior to system date
Closest Period prior to system date
--Shiv

Error while upgrading Oracle Portal to 10.1.4.

While upgrading Oracle Portal to 10.1.4 , I am getting the following error.
Error: Database version 9.0.1.5.1 is not supported
MRUA detected an error at C:\oracleportalupgrade\mrua_051020\mrua\mrua.pl line 212.
Please let me know how can I resolve this issue.

There is no WSRP container created as a part of the AS 10.1.2.0.2 or Portal 10.1.4 setup (that means there is no WSRP directory below $ORACLE_HOME/j2ee by derfault).
You need to create a brand new application server container, either in the same oracle home as portal or (as we are doing according to advice from oracle) create a new AS 10.1.2.0.2 AS oracle home for just J2EE (not portal) and then create a container for your WSRP portlets -- we called ours OC4J_WSRP. This is the step that will create a directory under $ORACLE_HOME/j2ee (in our case $ORACLE_HOME/j2ee/OC4J_WSRP).
After you have your new container (OC4J_WSRP), you need to configure this container to support WSRP. First you need to download the "Java Portlet Container for Standards" from http://www.oracle.com/technology/products/ias/portal/pdk.html (this does not come with the Portal 10.1.4 installation).
Download "Download the Java Portlet Container (JSR 168)":
http://download.oracle.com/otndocs/tech/ias/portal/files/portlet-container.zip
This will get you portlet-container.zip.
Extract this zip file. One of the files you will have is wsrp-install.jar.
Then log into the box where your new OC4J_WSRP container is setup (it is really important that you have not changed the default configuration of this new app server container or deployed any applications before running the next step) and ...
1. copy wsrp-install.jar into $ORACLE_HOME/j2ee/OC4J_WSRP
2. cd $ORACLE_HOME/j2ee/OC4J_WSRP
3. run "java -jar wsrp-install.jar"
4. restart your app server that contains OC4J_WSRP ("opmnctl stopall; opmnctl startall")
Now you have a app server container that you can deploy your JSR-168/WSRP portlets to! Just deploy your ear files to this OC4J_WSRP.

Oracle RAC not starting

Dear Experts....
I have two node Oracle RAC 11g Setup. This was working fine. We have only single public network configured under cluster. Both nodes have CE0 interfaces configured for RAC public IP. Due to hardware failure, CE0 on node2 is not working. I have another interface CE3 free on system. I have configured IP on CE3 (from OS layer using ifconfig). But unable to start Clusterware as interface is not configured under RAC.
My question is :-
Can I run different interface instances (however interface types are same) on both nodes? What changes I need to do for this?
A quick help would be appreciated...
Kind Rgds
Rajendra

You cannot have interface whos name are different on both nodes. i.e you should have CE0 on node2 if node1 was configured with CE0. If this condition is not met then clusterware wont start.
Read following from support.oracle.com which says network interface name should be same on all node.
RAC and Oracle Clusterware Best Practices and Starter Kit (Platform Independent) [ID 810394.1]
hope this help

Q: Oracle RAC backup

Hi Guys,
I'm new in RAC. I have a Oracle RAC database with 2 nodes. I want to know if it is good/appropriate to backup the 2 nodes instead of 1. Since I believe they both use the same database.
Thanks,
Benjo

>
Currently we are backing up two nodes of the Oracle RAC individually. What is on my mind is to backup only 1 node and that is all.
>
It seems to me that you should first get a clear understanding of what to backup . There is only one database to backup in a RAC, regardless of the number of nodes. If you are happy to connect with RMAN to one node and take a backup there, everything is fine. There is no need to connect to the other node and do the same there.
That is, if you have placed the archivelogs on the shared storage. This is a best practice. If they are on node-local devices, there is actually something node specific to backup. Else there is not.
Kind regards
Uwe
http://uhesse.wordpress.com

Is it possible to install Oracle RAC without shared storage

Dear All,
I would like to seek for your advice.
I got two different servers. We call it node 1 and node 2. And two different instances name.
Node 1 -> instance name as "ORCL1"
Node 2 -> instance name as "ORCL2"
For the system we need Oracle RAC active-active cluster mode. Our objective is to have 2 replicated databases, in other words we need 2 instances of the same database automatically replicated for 100% up time to the Application server. We have 2 separate database machines and 2 application server machines. We need our application server to connect to any of the databases at any point of time and be having a consistent data on both database machines. We only need the database to be in a cluster mode, we won't need the OS to be in a cluster. There is no shared storage in this case.
Can this be done? Please advice.

you should review RAC concepts, and the meaning of instance and database
For the system we need Oracle RAC active-active cluster mode.RAC = single database with multiple instances all accessing the same shared storage, no replication involved
Our objective is to have 2 replicated databases, in other words we need 2 instances of the same database automatically replicated for 100% up time to the Application server.what you describe here is = multiple databases with multiple instances, replicated between each other
We have 2 separate database machines and 2 application server machines. We need our application server to connect to any of the databases at any point of time and be having a consistent data on both database machines. We only need the database to be in a cluster mode, we won't need the OS to be in a cluster. There is no shared storage in this case.no shared storage = no RAC
you will have two seperate databases synchronizing continuously
you can use for example Streams / Advanced Replication (with multi-master configuration)
if you dont insist on an active-active configuration, you can also use Data Guard for building a standby database

Oracle Upgrade from Oracle RAC 9.2.0.6 to Oracle 10.2.0.4

Hi All,
Currently, we are running 4 node Oracle RAC environment with below mentioned configuration.
OS: Sun Solaris 5.9
Hardware: Sun E2900
Oracle Version: 9.2.0.6
Veritas Cluster Server: 4.1
We want to upgrade Oracle version to 10g, and currently analyzing the options to perform this. The current database size is 1TB appx and we want to spend minimum application shutdown time running on this database.
As part of upgrade, we also need to upgrade Veritas Cluster Server from 4.1 to 5.1 to support Oracle 10g. It would be great help,, if someone can pass some guideline to perform this task.
We are currently thinking about piecemeal approach, where we can upgrade each node individually and then put them back to cluster. There are some complexities involved, and its really high risk approach.
Thanks a lot in advance for help
Regards,
Manoj

Orcale 10g RAC requires you to install Oracle Clusterware. Oracle Supports running it along side a 3rd party clustering software. Not sure why you're so anxious to upgrade Veritas Clusterware when it will be trivial on the 10g db hosts.

Upgrade oracle 9i RAC to Oracle 11g RAC

Hi all,
db version:oracle 9.2.0.5 RAC
OS:Linux
My project team and client is planning to upgrade oracle 9i RAC to Oracle 11g RAC.
please suggest any MOS notes any links.
thanks,
Visu.
Edited by: visu996253 on Apr 8, 2013 5:30 AM

db version:oracle 9.2.0.5 RAC
OS:Linux
My project team and client is planning to upgrade oracle 9i RAC to Oracle 11g RAC.
please suggest any MOS notes any links.Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
http://www.oracle.com/technetwork/products/upgrade/index-088044.html
785351.1 - Oracle 11g Upgrade Companion
http://download.oracle.com/docs/cd/E11882_01/server.112/e17222.pdf - Oracle® Database Upgrade Guide 11g Release 2 (11.2) E10819-02
Edited by: KR10822864 on Apr 8, 2013 5:52 AM
added more info.

Database upgrade - Oracle 10g r2 ,RAC(2 Nodes with ASM) upgrade from HP-UX to RHEL 5.9

Hi All
I am planning to upgrade our RAC database 2 nodes with ASM from HP-UX to RHEL 5.9.
Following is our setup
Current setup:
Oracle Database 10g r2 (10.2.0.5.0) RAC database.
Nodes: 2
Storage: ASM
OS: HP-UX ia64
Database Size: 1.2 TB
New Setup:
Oracle Database 10g r2(10.2.0.5.0) RAC database
Nodes: 2
Storage: ASM
OS: RHEL 5.9 x86 64
Since we are moving from a big endian format to a small endian format(HP-UX to RHEL 5.9) the same ASM cannot be used.
Kindly help me with process and other important documents to be followed.
Thanks.

Hi...
If it was a standlone database concepts like transportable tablespaces, rman would have been convenient.
Since we are using a RAC database with ASM as storage how do we use these techniques specified in NOTE:733205.1
Due to endianness issue we cannot use the same ASM instance.
Along with the new RAC node install a new ASM instance would have to be created.
Kindly help me with migration for RAC with existing ASM to new Hardware
Thanks and Regards

Upgrade oracle RAC 10.2.0.1 to 10.2.0.4 software only without database

Similar Messages

Maybe you are looking for