Upgrade Oracle RAC 11.1.0.6 to 11.1.0.7, on linux

Hi,
I would just know where I can find a complete guide to upgrade my Oracle RAC 11.1.0.6 to the version 11.1.0.7.
It's running on a RedHat 5 (Linux version 2.6.18-164.10.1.el5)
I think I've first to upgrade the crs, than the database, is it correct?
Thanks in advance,
Samuel

correct,
the steps are always in official guides provided with the patchsets , from My Oracle Support.
https://updates.oracle.com/Orion/Readme/process_form?aru=10498637&no_header=1#CJAEDJAJ
Mind that 11.2.0.2.0 is available.

Similar Messages

Upgrade oracle rac 10g r2 10.2.0.3 to 10.2.0.4

Hi all,
I goint to upgrade oracle rac 10g r2 10.2.0.3 to 10.2.0.4 on Solaris 9, in the README file(patchset) does not say that upgrade the OCR, but int he Doc ID 316889.1 to say; it is necessary to upgrade or nothing happens if Iit does not upgrade?
Mexman
Edited by: ACS on 28/10/2009 12:19 PM

Hi!
I suppose if you have a Metalink note on which explains is necessary update OCR you must follow it. Software maker always are in reason!
Chiao!

Upgrade oracle RAC 10.2.0.1 to 10.2.0.4 software only without database

I want to upgrade oracle RAC 10.2.0.1 to 10.2.0.4 software only without database.
In this environment i am using OCFS file system not asm . please send me step to configure.

In other terms its called patchset application into your database home. Go to this note, assuming its linux, and do all steps until step 9 which is database upgrade.
10.2.0.4 Patch Set - Linux x86 64bit README [ID 559255.1]
Regards
Ed

Upgrading Oracle RAC from 10.0.2.3 to 10.0.2.4 on HP-UX

Hi all,
I have to apply 10.0.2.4 patch to Oracle RAC that running on HP-UX system. I'm inexperienced with this subject. What is your suggestions and recommendations about this? Can you share the your own roadmap and your experience?
Regards,
Alper.

Hi Alper,
a good starting point for upgrades are the Oracle Upgrade Companions for 10gR2 and 11g - they cover best practices and behaviour changes:
Note.466181.1- 10g Upgrade Companion
Note.601807.1 - Oracle 11g Upgrade Companion
Kind regards
Mike

Upgrade Oracle RAC 12.1 from 11.2.0.1 in soraris 11 Sparc

Dear All,
we have 2 node RAC 11.2.0.1 on Solaris 10, we are planning to upgrade to 4 Node RAC 12.1 in Solaris 11 Sparc 64. in new blade T5 1B.
we wont disturb current setup right now, we have to make 4 node 12.1/Solaris 11 sparc 64 bit setup & finally we will move database to new setup.
please Gurus, suggest me the correct procedure and Doc.
also i need advise on moving to the latest version 12.1 is it advisable?
Thanks & Regards.

For new setup use following MOS notes
Requirements for Installing Oracle Database 12.1 on Solaris 11 SPARC (Doc ID 1525614.1)
Some of useful OOW 2013 Docs
https://oracleus.activeevents.com/2013/connect/fileDownload/session/8B53FA85E6CE0B302AE6815A6891853C/CON8707_Wheeler.pdf

Upgrade oracle rac from 11.1.0.6 to 11.1.0.7 falure

I have a Enterprise Linux Enterprise Linux Server release 5 (Carthage), Linux linux1 2.6.18-8.el5 #1 SMP Tue Jun 5 23:25:19 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
After update working RAC 11.1.0.6 to 11.1.0.7 (2 nodes), crs services don't up on one node, on the second node it's up and work.
in $ORACLE_CRS_HOME/log/linux1/diskmon/client.log i have next lines:
Oracle Database 11g CRS Release 11.1.0.7.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
[ DISKMON] 03/25/2009 09:57:08.660 dskm_send_command: process 25155 sending command 8 to master diskmon listening on default pipe
[ DISKMON] 03/25/2009 09:57:08.661 dskm_send_command3: skgznp_connect failed with error 56815
[ DISKMON] 03/25/2009 09:57:08.661 dskm_send_command3: error 56815 at location skgznpcon6 - connect() - Permission denied
in $ORACLE_CRS_HOME/log/linux1/diskmon/diskmon.log i have next lines:
Oracle Database 11g CRS Release 11.1.0.7.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
[ DISKMON]
I/O Fencing and SKGXP HA monitoring daemon -- Version 1.0.0.0
Process 30782 started on 03/25/2009 at 09:54:30.122
[ DISKMON] 03/25/2009 09:54:30.131 dskm main: starting up
[ DISKMON]dskm_pmap: failed to open process map, errno 13
[ DISKMON] 03/25/2009 09:54:30.131 [30782:1094719808] dskm_rac_thrd_main: running
[ DISKMON] 03/25/2009 09:54:30.131 [30782:2919215216] dskm_rac_thrd_creat2: got the post from the css event handling thread
[ DISKMON] 03/25/2009 09:54:30.131 [30782:2919215216] dskm main10: skgznp_rm_pipe failed with error 56825
[ DISKMON] 03/25/2009 09:54:30.132 [30782:2919215216] dskm_main10: error 56825 at location skgznprmpipe - unlink() - Operation not permitted
[ DISKMON] 03/25/2009 09:54:30.132 [30782:2919215216] dskm main11: skgznp_create(default pipe) failed with error 56810
[ DISKMON] 03/25/2009 09:54:30.132 [30782:2919215216] dskm_main11: error 56810 at location skgznpcre3 - bind() - Address already in use
[ DISKMON]
Process 30782 exiting on 03/25/2009 at 09:54:30.132
Can anyone help me?
Thank you.
Edited by: user10934556 on Mar 25, 2009 3:00 AM

So for anyone else that stumbles across this posting. I had exactly the same issue. The problem for me was that there was a file in */tmp* called *.oracle_master_diskmon* with the wrong permissions. Removing this file allowed crs and more specifically $ORACLE_HOME/diskmon.bin to start correctly.
$ ls -ltr /tmp/.ora*
srwxr-xr-x 1 oracle oinstall 0 Dec 8 15:45 /tmp/.oracle_master_diskmon
No group write permissions on the file.
Hope this helps someone else save 8 hours digging around in the dark.

Upgrading oracle applications doubt

Hi,
I am upgrading oracle applications from 11.5.10.2 to R12.1.1 in linux OEL 5.
I have successfully upgraded the db from 9.2.0.6 to 10.2.0.5. And also new R12.1.1 file system is laid.
Now following upgrade guide, updated pfile as per R12 requirement and started the db with 10.2.0.5. [ Page 3-3 in R121 upgrade guide].
The next step is to apply the patch AD 7461070 [point 9 in page 3-5 page of r121 upgrade guide].
This patch needs to be applied on R12 application owner. But in my database release_name is 11.5.10.2.
How can i apply this patch??
Thanks
Taher

Hi Taher,
1). First Created the R12 code tree. [Installed 11g db. Is this 11g DB HOME is of any use].This is the default ORACLE_HOME which comes with the installer -- You do not need to use it.
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
2). Upgraded the DB from to 10.2.0.5. So does it mean i can use this 10.2.0.5 with both 11i and R12 just created in step 1.Not at the same time, as you will end up having R12 accessing the database (see the doc referenced above).
3). While applying the AD PATCH 7461070 i should copy adgrants to 10g ORALCE HOME. [not to 11g].
applclone -> 11i appl. owner
applr12 -> r12 appl. ownerYes, as you are still on 10g.
I am posting the log file here. I knew that i can not apply R12 patch in 11.5.10.2 environment. What i did was i applied the patch R12_8576725 environment.
As you have asked the log file.
AutoPatch error:
adprdf(): At line 3 in file u8576725.drv:
This patch cannot be applied to your current release.
Patch's intended release is "12.0.0"
Your current release is "11.5.10.2"
Freeing includes hash table
Freeing fixes hash table
Freeing basedons hash table
Freeing entities hash tableHave you completed all the steps as per the upgrade document and run AutoConfig. I do not think this is relevant to which env file you are sourcing, as the RELEASE_NAME column value is still 11.5.10.2 and it should be 12.x.x (as you mentioned above). So, please mention the steps you have followed to upgrade this instance.
Thanks,
Hussein

Error during installation Oracle RAC 11G

Hi experts;
I'm installing Oracle RAC 11G, this installation will be in two virtual servers, OS Linux redhat.
I began the installation with these steps
Configure Security Updates
then ask for proxy server information (nothing was entered), continue
Installation Option (don't ask anything)
then System Class (Server class selected)
Grid Options
(Real Application Clusters database installation)
when hit ENTER I got this errror message - (INS - 35354) The system on which you are attempting to install Oracle RAC is not part of a valid cluster.
I was looking in some forums an I found one where indicates I should indentiify these files and change some info on them;
=============================================================================
cat /etc/oraInst.loc
The ouput of the above command lists the inventory_directory
Browse to the inventory.xml file in that directory. My oraInventory
cd /u01/app/oracle/oraInventory/ContentsXML/
cat inventory.xml
You can verify that the flag CRS=true isn’t set for the $GRID_HOME
==============================================================================
However, I couldn't find any of those files in my directories.
also, i was verifying the note [ID 1053393.1, but again, I couldn't find where to change the values for CRS.
Any idea what I'm doing wrong?
I will apreciate your help.
Regards
Al
b

Hi,
RAC is a database in a cluster. One Database opened by one o more instances in one or more hosts.
Note: RAC is not a cluster, but a Database cluster.
To allow database be clustered, we need to install a software cluster.
We have some options, but Oracle developed your own software cluster actually named Grid Infrastructure for a cluster AKA Oracle Clusterware.
To install RAC you need first install and configure your cluster.
Before you start install Oracle cluster/RAC I recommend you start with concepts.
http://docs.oracle.com/cd/E14072_01/rac.112/e10717/intro.htm
http://docs.oracle.com/cd/E14072_01/rac.112/e10718/admcon.htm
Regards,
Levi Pereira

Oracle Upgrade from Oracle RAC 9.2.0.6 to Oracle 10.2.0.4

Hi All,
Currently, we are running 4 node Oracle RAC environment with below mentioned configuration.
OS: Sun Solaris 5.9
Hardware: Sun E2900
Oracle Version: 9.2.0.6
Veritas Cluster Server: 4.1
We want to upgrade Oracle version to 10g, and currently analyzing the options to perform this. The current database size is 1TB appx and we want to spend minimum application shutdown time running on this database.
As part of upgrade, we also need to upgrade Veritas Cluster Server from 4.1 to 5.1 to support Oracle 10g. It would be great help,, if someone can pass some guideline to perform this task.
We are currently thinking about piecemeal approach, where we can upgrade each node individually and then put them back to cluster. There are some complexities involved, and its really high risk approach.
Thanks a lot in advance for help
Regards,
Manoj

Orcale 10g RAC requires you to install Oracle Clusterware. Oracle Supports running it along side a 3rd party clustering software. Not sure why you're so anxious to upgrade Veritas Clusterware when it will be trivial on the 10g db hosts.

Upgrade oracle 9i RAC to Oracle 11g RAC

Hi all,
db version:oracle 9.2.0.5 RAC
OS:Linux
My project team and client is planning to upgrade oracle 9i RAC to Oracle 11g RAC.
please suggest any MOS notes any links.
thanks,
Visu.
Edited by: visu996253 on Apr 8, 2013 5:30 AM

db version:oracle 9.2.0.5 RAC
OS:Linux
My project team and client is planning to upgrade oracle 9i RAC to Oracle 11g RAC.
please suggest any MOS notes any links.Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
http://www.oracle.com/technetwork/products/upgrade/index-088044.html
785351.1 - Oracle 11g Upgrade Companion
http://download.oracle.com/docs/cd/E11882_01/server.112/e17222.pdf - Oracle® Database Upgrade Guide 11g Release 2 (11.2) E10819-02
Edited by: KR10822864 on Apr 8, 2013 5:52 AM
added more info.

Database upgrade - Oracle 10g r2 ,RAC(2 Nodes with ASM) upgrade from HP-UX to RHEL 5.9

Hi All
I am planning to upgrade our RAC database 2 nodes with ASM from HP-UX to RHEL 5.9.
Following is our setup
Current setup:
Oracle Database 10g r2 (10.2.0.5.0) RAC database.
Nodes: 2
Storage: ASM
OS: HP-UX ia64
Database Size: 1.2 TB
New Setup:
Oracle Database 10g r2(10.2.0.5.0) RAC database
Nodes: 2
Storage: ASM
OS: RHEL 5.9 x86 64
Since we are moving from a big endian format to a small endian format(HP-UX to RHEL 5.9) the same ASM cannot be used.
Kindly help me with process and other important documents to be followed.
Thanks.

Hi...
If it was a standlone database concepts like transportable tablespaces, rman would have been convenient.
Since we are using a RAC database with ASM as storage how do we use these techniques specified in NOTE:733205.1
Due to endianness issue we cannot use the same ASM instance.
Along with the new RAC node install a new ASM instance would have to be created.
Kindly help me with migration for RAC with existing ASM to new Hardware
Thanks and Regards

Kernel upgrade for oracle rac

In our environment we have two node oracle rac (10.2.0.3) on RHEL4U5. We are using SAN(eva 4000)I need to upgrade the linux from 4.5 to 4.8 including kernel .Do I need to upgrade the SAN firmware too ?
Thanks

In practise, OS upgrades do not affect other components, say like SAN firmware in this scenario.. I do not always have to upgrade/update the drivers (disk drivers inclusive) on the host every time when the OS on my machine is upgraded.
However, there could be compatibility issues which are rather product specific. SAN provider is the best source to advie us in such cases. As it is wisely advised earlier, it wont harm us to enquire with the involved parties.. although I make a generic statement that OS upgrade might not always lead to a firmware upgrade.

Upgrade oracle se to ee on RAC

Hi, I'm reading on the web, the steps necessary for upgrade oracle standard edition to enterprise edition,
but Is the same process for upgrade an oracle RAC from standard to enterprise edition?

Hi,
Is the same process for upgrade an oracle RAC from standard to enterprise edition?Yes procedure will be same for the RAC database also.
Refer the below link:
https://students.kiv.zcu.cz/doc/oracle/server.102/b14238/afterup.html
Regards,
Xaheer

Sudo upgrade from 1.8.5p2 to 1.8.6p8 will have any affect on oracle rac 11.2.0.3 servers running on the same?

sudo upgrade from 1.8.5p2 to 1.8.6p8 will have any affect on oracle rac 11.2.0.3 servers running on the same?

564b2558-b4a1-43c9-99b6-cfedc0ec44fb wrote:
Thanks for the information.
It means will not have any impact of upgrading the following in oracle 2nodes 11gR2 environment running on AIX.
SUDO: 1.8.5p2 to 1.8.6p8
SSH: 5.8.0.6102 to 6.0.0.6102
SSL: 0.9.8.1801 to 0.9.8.2500
So we need to bring down the servers and reboot the same once upgraded the above mentioned secured packages.
Will not have any problems of logging and Db will be in normal as earlier before upgrade and capable of using the secured packages as well, Please confirm on this?
I confirm

Install Oracle RAC 10g (10.2.0.1) on HP-UX B.11.31 U ia64 failed

Hi All
I am installing Oracle RAC 10g 10.2.0.1 on HP-UX B.11.31 U ia64 but can not complete
hosts file
#Public IPs
10.144.1.111 spgdb01
10.144.1.112 spgdb02
#Private IPs
10.144.2.2 spgdb01p
10.144.2.3 spgdb02p
#Virtual IPs
10.144.1.113 spgdb01v
10.144.1.114 spgdb02v
I do installation with runInstaller without error. It copy and link is ok. When I run root.sh then It cannot complete as following
Checking to see if Oracle CRS stack is already configured
Checking to see if any 9i GSD is up
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/oracle/product/10.2.0' is not owned by root
WARNING: directory '/oracle/product' is not owned by root
WARNING: directory '/oracle' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 0: spgdb01 spgdb01p spgdb01
node 1: spgdb02 spgdb02p spgdb02
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
Now formatting voting device: /ora/crs/votedisk01
waitpid(-1, 0x7fffdf50, WUNTRACED) .................................................................................................... [sleeping]
Now formatting voting device: /oracle/oradata1/crs/votedisk02
Now formatting voting device: /oracle/oradata2/crs/votedisk03
Format of 3 voting devices complete.
Startup will be queued to init within 30 seconds.
====================
I have waited for 10 mins but still not complete
Additionally, log from runInstaller, I got
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-04-28_12-13-31AM. Please wait ...-bash-4.2$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
Private Interconnect : null
Private Interconnect : null
Private Interconnect : null
Private Interconnect : null
So, please help me fix this issue
Thank you

I had this problem and resolved it by transporting the file to the installation server with the correct ftp datatype (binary).
On page 54 of the install guide (..Server\Oracle_Business_Intelligence\doc\doc\bi.1013\b31765.pdf) that comes with the installation files, there is an instruction to make sure that any ftp activity is done in binary.
This may not have occured with the license.xml file if you use a tool which offers the "feature" of automatic datatype recognition.
Hope this helps.

Upgrade Oracle RAC 11.1.0.6 to 11.1.0.7, on linux

Similar Messages

Maybe you are looking for