UPGRADE - OSS NOTE MODIFIED PROGRAMS

Hi all,
we are on verge of upgradtion form 4.6c to ECC 6.00
we have a lot of programs where we have applied oss notes.
Do i need to apply the oss notes in the new version ECC 6.00 too.
How can i know whether SAP has provided the same note modifications in new version i.e ECC 6.00
IN THAT CASE I DON'T HAVE TO APPLY OSS NOTE AGAIN.
Where does SPAU AND SPDD COME IN TO PICTURE
let me know if iam wrong
THANKS
SWATHI

hi Swathi,
A typical SAP version version upgrade has two phases:
1 - technical upgrade (installing the new version of SAP and migrating all the current objects to the new system)
2- adjusting the modifications.
SPAU/SPDD comes in the second phase.
Once we install the new version and migrate all the active objects into the new version, you can see the list of modified objects (including OSS note applications) in SPAU and SPDD.
SPDD contains all the data dictionary objects and SPAU the rest.
You need to drill down from SPAU and do a versin comparison with the active version in the existing system (the system with SAP's older version). If you come across changes with OSS notes,
firstly, you need to check in service.sap.com/notes the releases it supports. If it does not support the latest version, you will need to find a replacement note for this and implement the same. Else, if it is supported in the new release, you need to carry forward the changes in previous version to the new version. For this you need only to right click on the object in SPAU and select "adopt changes".
Hope this helps,
Sajan Joseph.
only the objects coming in SPAU

Similar Messages

Close the Programs that are opened by OSS Note

Hi,
We had opened some of the standard programs (With access key) and made the modifications as per the OSS note some time back, the programs that were modified are still open for editing even now and the client is concerned about the sanctity of the standard programs as they are open for everyone any one can make changes to the programs, how one can make sure that the object once opened should be closed immediately afer applying modifications, does SAP has any kind of mechanism using which we can track this,
Any help would be highly appreciated,
Rgds,

Hi Sailatha,
Once you have modified an SAP Object using an access key it becomes a custom Object. It can be modified at any time by any developer in the development system. If you have used the Modification Assistant or SNOTE while making the changes the first time, you will be prompted to retain your changes or reset to original in SPAU during upgrades / support packs.
Regards
Suresh Datti

OSS Note for dump in program LOLEAU02

Hallo Everybody,
I need help in finding an OSS notes for the runtime error MESSAGE_TYPE_X in the program LOLEAU02.The last modified date of this program is 6.11.2003.
There are many OSS notes and I couldn't able to sort the OSS note for this particular runtime error.I have given some details about the dump.

User and Transaction
 Language key........ "F"
 Transaction......... "IW32 "
 Program............. "SAPLOLEA"
 Screen.............. "SAPLSCAC 0100"
 Screen line......... 0
Information on where terminated
 The termination occurred in the ABAP program "SAPLOLEA" in "AC_SYSTEM_FLUSH".
 The main program was "SAPLCOIH ".
 The termination occurred in line 29 of the source code of the (Include)
 program "LOLEAU02"
 of the source code of program "LOLEAU02" (when calling the editor 290).
Source Code extract
24 WHEN 1.
25 * system_error
26 MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
27 WHEN 2.
28 * method_call_error
>> MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
30 WHEN 3.
Thanks in advance.Any inputs on this will be helpful.
Regards,
Raj

Hi,
Thanks Chandrasekar.
The thread has the same dump except the main program which is YQ9_UPLO.In my case the main program is SAPLSMTR_NAVIGATION.
Still the dumps occurs and I am unable to find the root cause. Any inputs will be som helpful.Thanks in advance.
Regards,
Raj

11.5.10.2 to R12.1.1 upgrade: Error loading seed data for GL_DEFAS_ACCESS_SETS: DEFINITION_ACCESS_SET = SUPER_USER_DEFAS, ORA-06508: PL/SQL: could not find program unit being called

Hello,
EBS version : 11.5.10.2
DB version : 11.2.0.3
OS version : AIX 6.1
As a part of 11.5.10.2 to R12.1.1 upgrade, while applying merged 12.1.1 upgrade driver(u6678700.drv), we got below error :
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ATTENTION: All workers either have failed or are waiting:
           FAILED: file glsupdas.ldt on worker 3.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log>tail -20 adwork003.log
Restarting job that failed and was fixed.
Time when worker restarted job: Wed Aug 07 2013 10:36:14
Loading data using FNDLOAD function.
FNDLOAD APPS/***** 0 Y UPLOAD @SQLGL:patch/115/import/glnlsdas.lct @SQLGL:patch/115/import/US/glsupdas.ldt -
Connecting to APPS......Connected successfully.
Calling FNDLOAD function.
Returned from FNDLOAD function.
Log file: /fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log/US_glsupdas_ldt.log
Error calling FNDLOAD function.
Time when worker failed: Wed Aug 07 2013 10:36:14
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log>tail -20 US_glsupdas_ldt.log
Current system time is Wed Aug 7 10:36:14 2013
Uploading from the data file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0), /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt) to staging tables
Dumping LCT file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0) into FND_SEED_STAGE_CONFIG
Dumping LDT file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS , GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for GL_DEFAS_ACCESS_SETS: DEFINITION_ACCESS_SET = SUPER_USER_DEFAS, ORA-06508: PL/SQL: could not find program unit being called
Concurrent request completed
Current system time is Wed Aug 7 10:36:14 2013
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Below is info about file versions and INVALID packages related to GL.
PACKAGE BODY GL_DEFAS_ACCESS_SETS_PKG is invalid with error component 'GL_DEFAS_DBNAME_S' must be declared.
I can see GL_DEFAS_DBNAME_S is a VALID sequence accessible by apps user with or without specifying GL as owner.
SQL> select text from dba_source where name in ('GL_DEFAS_ACCESS_DETAILS_PKG','GL_DEFAS_ACCESS_SETS_PKG') and line=2;
TEXT
/* $Header: glistdds.pls 120.4 2005/05/05 01:23:16 kvora ship $ */
/* $Header: glistddb.pls 120.16 2006/04/10 21:28:48 cma ship $ */
/* $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ */
/* $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ */
SQL> select * from all_objects where object_name in ('GL_DEFAS_ACCESS_DETAILS_PKG','GL_DEFAS_ACCESS_SETS_PKG')
2 ; OWNER OBJECT_NAME SUBOBJECT_NAM OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS T G S NAMESPACE
EDITION_NAME
APPS GL_DEFAS_ACCESS_DETAILS_PKG 1118545 PACKAGE 05-AUG-13 05-AUG-13 2013-08-05:18:54:51 VALID N N N 1
APPS GL_DEFAS_ACCESS_SETS_PKG 1118548 PACKAGE 05-AUG-13 06-AUG-13 2013-08-05:18:54:51 VALID N N N 1
APPS GL_DEFAS_ACCESS_SETS_PKG 1128507 PACKAGE BODY 05-AUG-13 06-AUG-13 2013-08-06:12:56:50 INVALID N N N 2
APPS GL_DEFAS_ACCESS_DETAILS_PKG 1128508 PACKAGE BODY 05-AUG-13 05-AUG-13 2013-08-05:19:43:51 VALID N N N 2
SQL> select * from all_objects where object_name='GL_DEFAS_DBNAME_S'; OWNER OBJECT_NAME SUBOBJECT_NAM OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS T G S NAMESPACE
EDITION_NAME
GL GL_DEFAS_DBNAME_S 1087285 SEQUENCE 05-AUG-13 05-AUG-13 2013-08-05:17:34:43 VALIDN N N 1
APPS GL_DEFAS_DBNAME_S 1087299 SYNONYM 05-AUG-13 05-AUG-13 2013-08-05:17:34:43 VALIDN N N 1
SQL> conn apps/apps
Connected.
SQL> SELECT OWNER, OBJECT_NAME, OBJECT_TYPE, STATUS
FROM DBA_OBJECTS
WHERE OBJECT_NAME = 'GL_DEFAS_ACCESS_SETS_PKG'; 2 3 OWNER OBJECT_NAME OBJECT_TYPE STATUS
APPS GL_DEFAS_ACCESS_SETS_PKG PACKAGE VALID
APPS GL_DEFAS_ACCESS_SETS_PKG PACKAGE BODY INVALID SQL> ALTER PACKAGE GL_DEFAS_ACCESS_SETS_PKG COMPILE; Warning: Package altered with compilation errors. SQL> show error
No errors.
SQL> ALTER PACKAGE GL_DEFAS_ACCESS_SETS_PKG COMPILE BODY; Warning: Package Body altered with compilation errors. SQL> show error
Errors for PACKAGE BODY GL_DEFAS_ACCESS_SETS_PKG: LINE/COL ERROR
39/17 PLS-00302: component 'GL_DEFAS_DBNAME_S' must be declared
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>cat $GL_TOP/patch/115/sql/glistdab.pls|grep -n GL_DEFAS_DBNAME_S
68: SELECT GL.GL_DEFAS_DBNAME_S.NEXTVAL
81: fnd_message.set_token('SEQUENCE', 'GL_DEFAS_DBNAME_S');
SQL> show user
USER is "APPS"
SQL> SELECT GL.GL_DEFAS_DBNAME_S.NEXTVAL
FROM dual; 2                         -- with GL.
NEXTVAL
1002
SQL> SELECT GL_DEFAS_DBNAME_S.NEXTVAL from dual;               --without GL. or using synonym.
NEXTVAL
1003
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>strings -a $GL_TOP/patch/115/sql/glistdab.pls|grep '$Header'
REM | $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ |
/* $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ */
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>strings -a $GL_TOP/patch/115/sql/glistdas.pls |grep '$Header'
REM | $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ |
/* $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ */

OSS notes relevant for FI/CO for upgrade from 4.7 to ECC 6.0

Hello,
I need the list of the applicable OSS notes relevant for the FI/CO module for upgrade from 4.7 to ECC 6.0
Thanks
Sid

Hi,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Please assign points if it useful.
Regards
Ravinagh Boni

Help in finding an OSS notes for a SAP Program

Hi,
A runtime error TIME_OUT has occured in the program LSCD2F01.
I need to find an OSS notes which deals with the correction of this dump.I have checked with the latest date of modification of this program and it is 18.02.2006
So the OSS notes which has been generated earlier to this date has been implemented in the program.
I have attached the Dump details below: Any inputs on this will be helpful.
Information on where terminated
The termination occurred in the ABAP program "SAPLSCD1" in "READ_CD_FROM_DB".
 The main program was "SAPMSSY1 ".
 The termination occurred in line 1031 of the source code of the (Include)
 program "LSCD2F01"
 of the source code of program "LSCD2F01" (when calling the editor 10310).
Source Code Extract
1020 FORM read_cd_from_db CHANGING pt_cdhdr TYPE cdhdr_tab
1021 pt_cdpos TYPE cdpos_tab
1022 pt_cdpos_uid TYPE cdpos_uid_tab.
1023
1024 DATA: lt_cdhdr_for_uid TYPE cdhdr_tab
1025 ,lv_guid_true TYPE i.
1026 FIELD-SYMBOLS: <fs_cdhdr> TYPE cdhdr.
1027
1028 CLEAR: lt_cdhdr_for_uid[], lv_guid_true.
1029
1030 * select header from cdhdr
>>>> SELECT * FROM cdhdr INTO TABLE pt_cdhdr
1032 WHERE objectclas IN lt_sl_objectclas
1033 AND objectid IN lt_sl_objectid
1034 AND changenr IN lt_sl_changenr
1035 AND username IN lt_sl_username
1036 AND (
1037 (
1038 udate = date_of_change
1039 AND
1040 utime >= time_of_change
1041 )
1042 OR
1043 udate > date_of_change
1044 )
Regards,
Raj

Check notes:
459838 Performance improvement with very large datasets
and
671283 Performance problem with change documents material master
Rob

OSS note for batch field in LT12 (Program:SAPML03T; screen: 1141)

Hi guys,
before ECC 6, batch field in LT12 has search help. In ECC 6, batch field has no more search help.
Is there an OSS note for the batch field in LT12 to have search help again/
Thanks!

check if it was custom search help in earlier version, which will be required to be created again after upgrade. nor worked on LT12 but we had to do it for many transactions in last upgrade.

How to modify oss notes

Dear all,
i have to modify one screen using oss note,
could you please explain me step by step with screen shot hw to book into oss note, it's urgent,
best regards
srinivas

chk this if it can help u
http://www.sap-img.com/basis/manually-applying-the-oss-note.htm

I am running firefox 23.0.1. I just upgraded to evernote 5.0+. When I try to add webclipper 5.7 to firefox I get the error Firefox can not modify the neede

I am running firefox 23.0.1. I just upgraded to evernote 5.0+.
When I try to add webclipper 5.7 to firefox I get the error
Firefox can not modify the needed file
I could not locate the files referenced in the answers presented.

Firefox no longer unpacks an extension automatically, but renames the XPI file to the ID of the extension and copies that file to the extensions folder in the Firefox Profile Folder.
If an extension needs to be unpacked then there should be an unpack directive (<nowiki><em:unpack>true</em:unpack></nowiki>) in the install.rdf file of that extension.
* https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
You can try to set the extensions.alwaysUnpack pref to true on the about:config page.
*http://kb.mozillazine.org/about:config

OSS notes during upgrade

Dear All,
We are doing ecc6.0 upgradation. While doing this in SPAU there are oss notes with green question marks under Note Corrections.
Kindly suggest me what to do with this oss notes. Whether to consider that or skip that?
Kind Regards,
Ranjith C.

Hi,
What is your OS & DB , What is your soruce release, At what phase you are currently in upgrade.
However your SPAU phase stands for your respository corrections , when we are upgrading SAP system we need to identify list SPDD & SPAU objects where standard objects are corretced. I beleive list objects SPDD & SPAU objects are shown by upgrade tool during pre-processing. SPAU corrections can also be done with in 2 weeks of time after the upgrade.
Do not skip talk to your abaper abaper & take a decision ....
-rahul

Need the content in oss note 473658 for implementing the program

Hi Friends
I am assigned a issue regrading OSS notes,i like know about the note 473658 and contents in that note.
Please help me regarding this.
Thanks & Regards,
Kamireddy

Hi Avinash,
This is the problem.
Note 1058804 - RAPOST2000/RAPOST2001: Problems with document
handling
Thanks,
Kamireddy

ABAP dump in ECC 6.0 - Need OSS notes

ABAP dump is coming when retriving data between select-endselect.
Runtime Errors DBIF_RSQL_INVALID_CURSOR
Except. CX_SY_OPEN_SQL_DB
The problem cannot be resolved without correcting the application
program.
The statements MESSAGE, COMMIT WORK, ROLLBACK WORK, CALL SCREEN,
BREAK-POINT, WAIT, CALL FUNCTION ... DESTINATION, CALL FUNCTION ...
STARTING NEW TASK, RECEIVE RESULTS, CALL SELECTION-SCREEN, CALL
DIALOG, CALL TRANSACTION cannot be used within a database
loop.
You can collect the data needed for these statements together in an
internal table and process them
in a loop.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_INVALID_CURSOR" "CX_SY_OPEN_SQL_DB"
Can you please give the OSS notes no. if anything is available.

Hi Sreedevi..
In the dump report, the piece of code where the dump occured will be shown
something with >>>>>> sign in the line...
Please copy and paste this peice of code..
Thanks and Best Regards,
Vikas Bittera.
**Reward if useful**

From where do we see OSS notes and message errors...

hi,
From where do we see OSS notes and message errors details if the error number is provided??
Thanks & Regards

*OSS* are online sap support notes. These notes are available online for solving critical problems in sap system.We may use the already existing notes or may add our own quaries.
In order to apply any OSS note, you have to be authorized by your company and be assigned an OSS ID and password.
For any SAP standard program modification, you are required to login to OSS and request for a repair program Access key.
Access the SAP Support Portal:
*http://service.sap.com/*
- Keys and Requests
-- Request license key
--- Follow the Steps 1 to 5 of the License keys for SAP Business Suite
Follow this step to obtain the Program Access key:
Menu Path: System -> Services -> SAP Service (Transaction code OSS1)
Login in with your OSS ID and Password
Click the Registration button
Click Register Object
Double click R/3 Value Contract
Fill in the Object Registration for Installation:
For e.g.
PGMID/Object/Name: R3TR FUGR MIGO
SAP release: 46C
Finished, click the Register button
Select the Key number and use the Copy and Paste short key to copy the Access key
You are now able to modify the SAP standard program.
Finished the modification, do remember to transport it to the production system after all the necessary testing.
http://www.sap-img.com/basis/what-are-sap-notes.htm
http://www.sap-img.com/basis/oss-notes.htm
http://www.sap-img.com/basis/manually-applying-the-oss-note.htm
Regards,
Ashok

How to create 'OSS ' notes

how to create 'OSS ' notes

Hi
You can't create OSS notes. SAP already provides them.
Only thing is you have to see them and change/modify your programs as per tthe corrections mentioned in them.Again you should have a User id and Password to view them.You can view them through --search notes..
http://www.sap.help.com/
Regards,
Anji
Message was edited by:
Anji Reddy Vangala

RPCAFIE0 - Automatismos / DUMP (OSS Note 1669690)

Hello,
Anyone with this rumtime error?:
I think that the problem may be caused after implementation of OSS Note 1669690.
RPCAFIE0 (AFI - Mensaje de Afiliación) generates an abend when creating the AFI file with "Automatismos".
Dump occurs in RPCAFIF2 just in the code included by oss note 1669690:
* BAdI to generate custom movements
IF gv_is_implemented IS INITIAL.
    CALL METHOD gb_exit_obj->gen_automatism_data
      EXPORTING
        pv_pernr = pernr-pernr
        pv_begda = p_begda
        pv_endda = p_endda
        pt_p0000 = p0000_tab[]
        pt_p0061 = p0061_tab[]
        pt_p0302 = p0302_tab[]
      CHANGING
        ct_afitab = l_afitab_col[].
ENDIF.
* END OF CALL TO BAdI to generate custom movements
Runtime Error:
OBJECTS_OBJREF_NOT_ASSIGNED_NO
Excepción CX_SY_REF_IS_INITIAL
Zugriff über 'NULL' Objektreferenz nicht möglich.
001050     ENDLOOP.
001060
001070   * BAdI to generate custom movements
001080     IF gv_is_implemented IS INITIAL.
     >       CALL METHOD gb_exit_obj->gen_automatism_data
001100         EXPORTING
001110           pv_pernr = pernr-pernr
001120           pv_begda = p_begda
001130           pv_endda = p_endda
001140           pt_p0000 = p0000_tab[]
001150           pt_p0061 = p0061_tab[]
001160           pt_p0302 = p0302_tab[]
001170         CHANGING
001180           ct_afitab = l_afitab_col[].
001190     ENDIF.
001200   * END OF CALL TO BAdI to generate custom movements
001210
001220     PERFORM fusionar_movimientos TABLES afitab
001230                                         l_afitab_col .
001240
001250
001260   ENDFORM.    "automatismos
Thanks,
Rafa

Any idea?
Just as information we are under 4.7 version and we have a separate system for the upgrade to ECC6.0.
In the server upgraded the RPCAFIE0 program does not generate runtime errors.
The point of the abend has changed a little bit:
* BAdI to generate custom movements
IF gv_badi_return_code IS INITIAL.
     CALL BADI go_exit_obj->gen_automatism_data
       EXPORTING
         pv_pernr = pernr-pernr
         pv_begda = p_begda
         pv_endda = p_endda
         pt_p0000 = p0000_tab[]
         pt_p0061 = p0061_tab[]
         pt_p0302 = p0302_tab[]
       CHANGING
         ct_afitab = l_afitab_col[].
ENDIF.
* END OF CALL TO BAdI to generate custom movements
There are also some differences in data declarations:
Enterprise 4.7:
DATA gb_exit_obj       TYPE REF TO badi_hrpayes_afie0.
ECC 6.0:
DATA go_exit_obj          TYPE REF TO hrpayes_afie0.
And when debugging, on 6.0 go_exit_obj contains initial values and 4.7 ***illegal reference***
Waiting for some help
thx
Rafa

UPGRADE - OSS NOTE MODIFIED PROGRAMS

Similar Messages

Maybe you are looking for