Upgrade our Apps 11.5.7 to R12 manually

Hi,
I have an idea to upgrade our Apps 11.5.7 to R12 in manually.
Here I am describing Method. Please suggest me I am Wright or wrong?
Current Configuration:
Apps Version 11.5.7
DB Version: 8.1.7
Single Node, Single Use rsetup
Up gradation Path
Apps Version R12
DB version 10gR2
Should be same Single node and single user setup
I want to upgrade my Apps manually and want to follow following steps:
Please suggest me can we upgrade our Apps to R12?
Method
·     First we will install R12 (Application and DB both) on the "existing box “.
·     Upgrade database. (Manually)
·     Backup entire (11.5.7) APPL_TOP, COMMN_TOP/HTM and COMMN_TOP/JAVA
·     Restore all Above file in new R12 Appl_TOP
·     And confiner tier R12 instance.
Anup

Bob,
Definitely, neither did i say that. There have been some major improvements, since base 12.0.0.So, better we go with 12.0.4 then to 12.0.6 instead of 12.0
I didn't say 11.5.8, i said i tried 11.5.8/11.5.10.2, which implies i tried both but neither worked out for me.It all depends on their env's. I had a SR with Support in fixing autoconfig, it was going front and back for a month and still could figure out what the issue was. Then i said forget it and went on to R12.0 directly. And later patched it to R12.0.6I do remember you did this upgrade, we had many emails discussing some issues with your upgrade, and you ended up with 11i --> 12.0 --> 12.0.4
Frankly, even support had doubts on this. When i raised an SR, stating i'm coming from 11.5.7, the first thing they would do say is : This path is not supported, then i had to point them to the R12.0 upgrade doc. There is no doubt at all when it comes to 12.0.4 as you need to be on 11.5.8 or above, it is clear.
I never said to stop at R12.0, R12.0.6 should be the final destination as of now. I pointed the OP to upgrade to 12.0.4 instead of 12.0 which I believe is the proper upgrade path based on experience with this upgrade.
I only meant to say *11.5.7 can be upgraded to R12.0 directly*
http://download.oracle.com/docs/cd/B34956_01/current/acrobat/r12upg11i.zip
That's right, and I do agree about this. But, I never referred to 12.0, so please try to read my replies again.
Regards,
Hussein

Similar Messages

0008 install error for upgrade playbook app

Hi, BlackBerry approved and we were able to upgrade our apps. However, we found that they are unable to install. The error mesasge shows "Install Error: [0008] There was a problem during installation. Please try again".
I had looked around other sources but couldn't find any information about this. Does anyone know the solution on this?
Device : PlayBook, OS ver. 2.1.0.1526
Thanks in advance.

Look at message 42, 44 here
http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/Install-Error-0008/m-p/2563161/highlight/...
Sarah.

Current 11.5.10.2 to R12, will we have to upgrade our database???

If we look to upgrade our instance from current 11.5.10.2 to R12, will we have to upgrade our database as well and any related hardware in terms of space or version?
Also, does the below existing infrastructure look good? –
• Infrastructure (Existing)
– Database Server: IBM Bladecenter Intel Xeon (R) 2 CPU 2.50GHz, 8 GB RAM
– Storage: IBM SAN DS4700
• Platform (Existing) : – Linux Enterprise Server

any update????

I recently upgraded our iPad software to 5.1. However, none of our previously downloaded Apps works, i.e. Facebook, Scrabble, etc. Can anyone help me reset these Apps?

I recently upgraded our iPad software to 5.1. However, none of our previously downloaded Apps works, i.e. Facebook, Scrabble, etc. Can anyone help me reset these Apps?
Thanks!
ScotfromSuwanee

Download another app - any free app will work. See if that does the trick.

Upgrading Oracle Apps R12 from 12.0.0 to 12.0.4?

Hi
Can anybody help in upgrading Oracle Apps R12 from 12.0.0 to 12.0.4?
Please provide me the links or steps involved?
Thanking you.

Oracle E-Business Suite 12.0.4 Release Update Pack Readme
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=465776.1
6510214 R12.AD.A.DELTA.4
sqlplus "/as sysdba" @$APPL_TOP/admin/adgrants.sql APPLSYS
6435000 ORACLE E-BUSINESS SUITE 12.0.4 RELEASE UPDATE PACK (RUP4)
6400100 CONSOLIDATED ONLINE HELP FOR 12.0.4
6742236 FORMS FAILS TO LAUNCH USING FIREFOX AND MOZILLA
6116405 AS11 CLASSIC - REPORTS MATS RUN HANGS
6145693 R12 RAPIDCLONE CONSOLIDATED FIXES JAN/2008
The following Oracle Forms objects did not generate successfully:
igc forms/US IGCBDAQF.fmx
igi forms/US IGIPDETU.fmx
igi forms/US IGIRRMSC.fmx
12.0.4 : Several Invalid Objects After Applying Rup4.
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=554096.1
Cause
The synonym HX_PARTY_RELAIONSHIPS does not exist.
Solution
-- To implement the solution, please execute the following steps::
Run adadmin option Recreate Grants and Synonyms.
Verify that the synonym HZ_PARTY_RELATIONSHIPS is created.
Run adadmin to compile invalid objects.
Run adadmin to regenerate the forms.
After you have updated to Release 12.0.4, perform the following post-update steps to update all database tier nodes with the code level provided by RUP4:
Application tier:
* As the APPLMGR user, run the environment (UNIX) or the command (WINDOWS) file for the current APPL_TOP.
UNIX
. ./<APPL_TOP>/APPS<CONTEXT_NAME>.env
Windows
<APPL_TOP>\envshell<CONTEXT_NAME>.cmd
* Run AutoConfig on the APPL_TOP.
* Run the admkappsutil.pl utility to create the file appsutil.zip in the <INST_TOP>/admin/out directory.
perl <AD_TOP>/bin/admkappsutil.pl
Note: For details on how to run AutoConfig and create appsutil.zip, refer to Using AutoConfig to Manage System Configurations in Oracle Applications Release 12 (Doc ID: 387859.1).
* Copy or FTP the appsutil.zip file to the <RDBMS ORACLE_HOME>.
* Uncompress appsutil.zip under the <RDBMS ORACLE_HOME>.
cd <ORACLE_HOME> unzip -o appsutil.zip
* Run AutoConfig on the <RDBMS ORACLE_HOME>.
Note: For details on how to run AutoConfig on the database tier and how to transfer the AutoConfig updates from the APPL_TOP to the RDBMS ORACLE_HOME, refer to Using AutoConfig to Manage System Configurations in Oracle Applications Release 12 (Doc ID: 387859.1), Section 2, Step 3, Patching AutoConfig.
Database tier and application tier:
Re-run adpreclone.pl on the database tier and the applications tier. Since updates included in RUP4 were applied to the system, adpreclone must be run again in order to apply the updates to the clone directory structures used during cloning.
perl adpreclone.pl dbTier
perl adpreclone.pl appsTier

Compass app not installed when I upgraded our iPhone 3G's

I upgraded our two iPhones (both 3G) and Compass app failed to appear. Voice Recorder showed up but not Compass. Did I do something wrong?

KC7GNM wrote:
clarkkent27 wrote:
Carlos Echenique wrote:
Thanks all. I thought i did something wrong...
No problem mate. I have noticed there is not much activity at the app store lately as all the Devs are making updates for their apps for 3.0.
They should have had the developer kit already and should have had stuff already out. MLB had an update out on the 17th the same day 3.0 came out. USA today Crosswords is a prime example that they should have fixed before 3.0 came out. Right now that app is useless until they get an update out.
Totally agree mate. We all have apps we can't use. Ridiculous. I had 2 updates on the 17th. But that's it. I have 20 other apps i can't use.

My husband and I have upgraded our phones (iPhone 4s and iPhone 5) to the iPhone 5s. We have given 2 of our kids the "old" phones and want to set them up as an iPod touch. Both kids have email and need to be able to text (iMessage).

My husband and I have upgraded our phones (iPhone 4s and iPhone 5) to the iPhone 5s. We have given 2 of our kids the "old" phones and want to set them up as an iPod touch. Both kids have email and need to be able to text (iMessage).
I have read multiple posts on how to do this and I am still confused.
Apple ID/ICoud:
We want to be able to monitor what they do, but do not want their devices linked to our emails/contacts/etc... Each kid has their own email account. So, from what I have read the best way to do this is to use our family Apple ID, but set them up with a separate iCloud account? Is this correct?
Reset/Restore/DFU:
To start fresh we have done multiple factory resets. I did one that someone said was a DFU and a plan ol' factory reset, etc... Not sure the difference. However, when I do that I get the "hello" screen and am able to start setting the phone up anew. However, when I go to set the phone up as an iPod I end with the same result.
So, here is what I am doing (tell me what I am doing wrong):
Hello Screen
Asks me to select language and selecting: English
Select Your Country or Region: United States
Choose a Wi-Fi Network: select my home wi-fi network
Enter password: entered my home wi-fi network password
Activiate iPhone - wants me to enter Apple ID and Passwordsays that this iphone is currently linked to an Apple ID (k*******@gmail.com). Sign in with the Apple ID that was used to set up this iPhone.
Location Services - I have enabled location services
Set Up iPhone
Set Up as New iPhone
Apple ID
Options are to sign in with your Apple ID or Create a Free Apple ID
Or I could "skip this step"
I signed in with my Apple ID
Terms and Conditions - Agree
iCloud - I can select either to use iCloud or Don't Use iCloud - I selected use iCloud
Find My iPhone - I can select either to use find my iPhone or to not - I selected use find my iphone
Once I do this it says iMessage and FaceTime and shows the following:
my email
my other child's cell phone number
and my husband's work phone number
This is where things do not make sense. I only want the phone set up with the current child's email address. Where did I go wrong?

There are a number of Apple services: iMessage, FaceTime, iCloud, Game center, Find My iPad, etc.
Now, to share apps, music and books you need to have the same Apple ID:
iPad's Settings > iTunes & App Stores > Apple ID > Your purchasing Apple ID.
For the other service, your wife should have her own Apple ID.
All she needs is a valid e-mail address, apply Apple ID below:
https://appleid.apple.com
Here's a limk with useful tips: Note: It's also valid in IOS 6
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

Unable to get the login page after upgrade from 11.5.10.2 to R12

Hi ,
We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
Pls let me know if someone has come across this issue.
Thanks&Regards,
Apps DBA

Hi ,
After compile JSP files manually , now we are facing problem after logging.
Error : You have encountered an unexpected error.
Thanks&Regards,
Apps DBA

In order to run Dragon, we upgraded our OSx to Maverick. Now we can't find our word processing program and Appleworks 6 is not supported. Doesn't a word processing program come with the upload of Maverick?

We upgraded our Mac OS X to a Maverick in order to run a Dragon Program. However, we no longer have a word processing program! Appleworks is not supported. Doesn't the upgraded Maverick have a word processing program included?

Lady Artemis wrote:
We upgraded our Mac OS X to a Maverick in order to run a Dragon Program. However, we no longer have a word processing program! Appleworks is not supported. Doesn't the upgraded Maverick have a word processing program included?
Not included. You can purchase Pages in the App Store, or use a free word processor like Bean or a free office suite like LibreOffice or OpenOffice (and there's also MicroSoft Office for Mac)

JRE not upgraded to 1.6_0_X while upgrading our EBS from 12.0.6 to 12.1.1

Hi,
We are in the middle of upgrading our EBS from 12.0.6 to 12.1.1. We have successfully applied patch and upgraded Oracle homes.
I have upgraded JDk and got below output.
$ADJVAPRG -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
But after upgrading JRE - I got the below output.
$ java -version
java version "1.4.2"
gcj (GCC) 3.4.6 20060404 (Red Hat 3.4.6-8)
Please suggest on this.
Regards,

Thanks Hussain,
Please find the below out put for the steps 4.2 & 5.
Step 4
[xxxxx@xxxxxx ~]$ $ADJVAPRG -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode)
[xxxxx@xxxxxx ~]$ echo $CLASSPATH
/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/d01/oraapps/PROJ_PRD/apps/apps_st/comn/java/lib/appsborg.zip:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.2/forms/java:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.2/forms/java/frmall.jar:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.2/jlib/ewt3.jar:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/d01/oraapps/PROJ_PRD/apps/apps_st/comn/java/classes
[xxxxx@xxxxxx ~]$ $AFJVAPRG -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode)
[xxxxx@xxxxxx ~]$ echo $AF_CLASSPATH
/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/d01/oraapps/PROJ_PRD/apps/apps_st/comn/java/lib/appsborg2.zip:/d01/oraapps/PROJ_PRD/apps/apps_st/comn/java/classes
Step : 5
[xxxxx@xxxxxx ~]$ cd $ORACLE_HOME/appsutil/jre/bin
[xxxxx@xxxxxx bin]$ java -version
java version "1.4.2"
gcj (GCC) 3.4.6 20060404 (Red Hat 3.4.6-8)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Regards,

Anyone having issues upgrading RFC apps from ECC 5.0 to ECC 6.0 ?

We are having issues upgrading our simple RFC app from ECC 5 to ECC 6.
we are using the librfc32u.dll ( 710_Rel) to make a simple call to return MARD table entries.
Runs great in our 5.0 system.
When we run against our 6.0 environment with the same dll, we get garbage back in the table results... (escape characters ).
We have tried downloading the latest 7.0 librffc* ( standard an u ) . We recompiled to embrace both unicode and non-unicode. ( fyi our 6.0 environment is unicode ) . All attempts have failed to date.
Has anyone else experienced issues trying to upgrade their rfc applications?

david, were you able to fix this issue? i have a similar issue. we are upgrading from 4.6c to ecc 6.0. we use a c# program that connects thru sap connector for .net v2.0. it calls a rfc function module, it connects and passes some data, but not all data to the rfc.
any help would be appreciated.
thanks.

My ipod wont let me buy any apps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

my ipod wont let me buy any appps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

To change asccount information see:
Changing Account Information
For the code issue this may help.
iTunes Store: My credit card's security code or zip code does not match my bank's records
For a standard iTunes account you need a valid payment method even for free apps and app updates.
What is making it think that you own money for an app upgrade?

HeLLO I AM USING AN IPHONE 5 From Last few days I DON'T KNOW WHAT HAPEND TO MY SET ITS DISTURBING ME A LOT DON'T KNOW WHY BUT I AM NOT ABLE TO UPGRADE ANY APPS BECAUSE WHEN I AM TRYING TO UPGRADE OR DOWNLOAD ANY APP THROUGH WIFI ND 3G BOTH AFTER SOMETIME

HeLLO I AM USING AN IPHONE 5 From Last few days I DON'T KNOW WHAT HAPEND TO MY SET ITS DISTURBING ME A LOT DON'T KNOW WHY BUT I AM NOT ABLE TO UPGRADE ANY APPS BECAUSE WHEN I AM TRYING TO UPGRADE OR DOWNLOAD ANY APP THROUGH WIFI ND 3G BOTH AFTER SOMETIMES IT STOPS DOWNLOADING AND SHows THAT "UNABLE TO DOWNLOAD THIS APP" IT'S SHOWING THIS MESSAGE IN EVERY APP AND ALSO AT ITS DISTURBING ME AT THE TIME OF WATCHING ANY VIDEOS TOO. BECAUSE WHEN I AM TRYING TO WATCH ANY VIDEO IN YOUTUBE IT'S DISTURBING VIDEOS ARE NOT PLAYING ND SOUNDS ARE NOT COMING PROPERLY ND THE IMAGE QUALITY ALSO BECOMES POOR AND THE VIDEO STOPS AFTER SOME TIMES THIS PROBLEM IS HAPPENING AT ALL THE VIDEO ND IT'S HARASSING A LOT. THE SAME PROBLEM IS ALSO HAPPENING TO MY BROTHER'S PHONE TOO.. REQUEST TO APPLE PLEASE ANALYSE AND FIXED THE PROBLEM AS SOON AS POSSIBLE OR ELSE MAYB I NEED TO STOP USING APPLE PRODUCTS. CAUSE IT'S HARASSING MY DAILY LIFE A LOT....

These are user to user forums. You ARE NOT addressing Apple by posting here.
Also, why are you YELLING at us?? Stop using ALL CAPS.
What steps have you done to try and fix the problem?

What's the best way to get user testing of our app (we're based in the UK)

Hi all.
We've just developed our first app for Palm and would really like to get some feedback from Palm users (our app allows users to take photos and send them as real printed postcards. We'd be very happy to give users free postcards in exchange for feedback).
The problem we have is that Palm users are pretty sparse in the UK. We've found that user testing with non-Palm users becomes handset testing rather than app testing. We have to teach them how to use Palm ("Where's the back button?") and so the testing mainly focuses on the particularities of Palm rather than our app. Plus, we don't benefit from the user being able to compare to other Palm apps.
Any advice on the best way to get feedback from Palm users? Especially as they'll need to download the SDK and install our app using it in order to get it onto their phones.
If any of the users of this forum are interested in giving the app a go and sending us feedback, I'd love to send you the IPK and then chat. Just send me an email using [email protected]
Our app is available for Pixi+, Pre+ and Pre2.
Thanks,
Freddie.
Post relates to: Pixi Plus p121ueu (SFR)

Hello freddie:
Welcome to the Palm Forums. Thank You for the offer. I highly suggest offering it up
to our many enthusiasts on Twitter as a beta with the #webos hashtag or joining
the Precentral.net community and list it in a topic there, homebrew beta. You would
get better beta response if you Package your app and put it in an ipk to simplify
the install.
Hope that helps... Best of luck with your app!
notimeoff

Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.

Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.

Yes. Delete the Apps that were not Purchased using Your Apple ID.
But a Restore as New is the way to go.

Upgrade our Apps 11.5.7 to R12 manually

Similar Messages

Maybe you are looking for