Upgrade packages(mups) are not sent to ALL mobile clients

Upgrade packages are not sent to all mobile clients even though there are
subscriptions assigned. There are 3 sites(A,B,C) with these
subscriptions. Only one site(A) receives the package. The other two
sites(B and C) doesnt receive the package and their outbound queue doesnt
show the messages.
The subscriptions were earlier removed for these sites (B and C) and then
added back.
Generated all the bdocs in smoggen, gnrwb and sent the package again but in vain.

the generation did the trick. the queue has been stopped in between and that is the reason why the packages were not sent after the bdocs were generated.

Similar Messages

  • Package Services are not working in APP-V Client

    Hi Guys,
    As  Virtualizing iPhone Config Utility 3.6 in APP-V 5.0  Publishing in APP-V Client.
    After launching shortcut, it is throwing error like "Apple Mobile service" is not working  and service is also not installing in client machine while it is automatic. it is running through local System".
    can any say that APP-V 5.0 is having ay limitations that it will not capture service which it running through Local Service" 
    i have tested some packages which is having services in Local service not capturing.
    can any one explain.
    Thanks in advance

    The limitation is that only services running as LocalSystem are captured and supported.
    More information about virtual services here .

  • Why is it that free games are usually require to purchased the upgrades or full version not free at all?

    Why is it that free games are usually require to purchased the upgrades or full version not free at all?

    Cause the people that developed them didn't do it out of the goodness of their hearts, they did it to make money.
    I don't go for many games, but one thing to look for is a lot of 'top in app purchases' then read the reviews.
    they kinda fall under a technicality, the shell of the game IS free, but content isnt'. Just like the app to read a magazine is free, but the actual magazines aren't.
    And i'm sure the app store loves to see so many 'free' signs on the cover, so they can advertise taht there are tons of free apps...which technically there are and they're not lying. Not until you did into it do you see that free app  is not the same as free app with free content.

  • How to Show All Packages, That are not required by any other package

    I need a way to see al the installed packages thar are not required by any other package
    Thanks in advance ...

    You probably want pacman -Qt or pacman -Qdt
    Check out man pacman.

  • How do i get my photos to stream to my iPad in the events that were oringally created.  Right now they are streaming as photos and are not grouped at all.  I would like to get them back into the events that were originally created

    how do i get my photos to stream to my iPad in the events that were oringally created.  Right now they are streaming as photos and are not grouped at all.  I would like to get them back into the events that were originally created

    Hi..
    Thanks for the reply..
    My original I Phone 5 was running IOS 6.12
    My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
    Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
    I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
    So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
    I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
    but it doesn't help me..
    Steve

  • It seems I am installing add-ons ie, ebay sidebar, tweetbeat firsthand, they look installed in the add-on box but are not working at all?

    I can go to tools, add ons and choose the add on I want and install it, then restart firefox but although the new add ons show up in the add on list nothing is there, they are not working at all, I am able to click on and change the options but apart from the new add ons do not appear to be there?

    Hi,
    I actually have the same exact problem with southwest.com. I think they use AJAX to load the airport cities when you're choosing a flight, perhaps. Normally, when you click the box (or start to type a city) in the "From" box, it pops up a list of airports in a floating box (not a separate browser window). Since upgrading to Firefox 3.6.15, this just doesn't work, and it also keeps me from using southwest.com in general. The calendar links for the departure and return dates are similarly busted.
    I tried restarting in Safe Mode, and it is still broken in Safe Mode.
    I downloaded the FF4 RC, and that version had no problem. If I switch back to 3.6.15 though, it is still broken. I tried it in Chrome and IE7, and southwest.com works fine. It appears to only be broken in FF 3.6.15.
    Thanks!

  • Wf mails are not sent

    Hi
    Workflow mails are not sent.
    The global preference was set as Do not send emails, we changed the same to mail with attachments. After that we ran resend failed or undelivered messages request. Even then the messages are not sent.
    mail_status is null in wf_notifications table for all of these messages.
    None of the activities are errored.
    I appreciate if any body faced similar situation and can point me where things are going wrong.
    Thanks
    Prasad

    The notifications that were sent when the preference was set to "Do not send mail" are not considered failed or undelivered. Those notifications at the time they were sent were not supposed to be sent as e-mail.. so not sent. If you want them to sent as e-mail, you will have to manually update the MAIL_STATUS to MAIL, run $FND_TOP/sql/wfntfqup.sql to rebuild the mailer queue. This will take care of sending all those e-mails.

  • Some POs are not sent to supplier via email

    Hello all,
    During the PO ordering to supplier via email, some POs are not sent to the supplier.
    the document output status is in incorrectly processed in the table PPFTTRIGG.
    Pls help me with any standard job is available to execute this incorrectly processed PO outputs.
    Regards
    Madhan

    Hello Maddan,
    If some of your action status have errors occured during processing, you cannot re-process PO edition: you have first to identify what was the error.
    So, get the application keys (PO number) from table PPFTTRIGG for which status is "2". Then, check in transactional what is exactly the error for each PO concerned.
    Regards.
    Laurent.

  • SUS - MM Scenario: notification mail not sent to all Supplier Users

    Hi,
    we're in a SUS-MM scenario and we publish Purchasing documents (PO and/or SAR) to SUS portal.
    The notification mail for new published documents are sent only to the e-mail address of the Supplier (imported from SAP to SUS) which is in the SAP Supplier Master data. But if the Admin supplier creates other users for the supplier (F1 / F2 / F3), the notification mail for new published PO/SAR are not sent to the mail address of F1 / F2 / F3 users. Is it the standard behavior or is there some missing customizing setting missing?
    Our customer wants that notification mail are sent to all the mail addresses of the Supplier Users.
    Has someone had this kind of requirement? and, if it is not achievable via standard customizing, which could be the right solution to meet this requirement?
    Thanks in advance

    Hi,
    This is a standard SAP process which SAP has provided,
    The other way is to develop a custom program,
    1) Select the Supplier.
    2) Check the available contact persons of the Supplier.
    3) When a document is created in ECC (Hope you are in MM-SUS), select the list of contact persons for Supplier. (I assume need a RFC FM to develop to SUS)
    4) Send a e-mail to all users linked with this Supplier.
    You can find the linked Contact persons in BP transaction and Table BUT000.
    Please change the Status of the Issue once your problem solved, other will get benefitted. If possible post the soulution.
    Thank you,
    Anil

  • Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g.  I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service".  How do I fix it?

    Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g.  I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service".  How do I fix it?
    I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
    Any help appreciated.
    Thanks,
    Louisa

    Hi, l have the same problem, were you able to resolve?

  • Few POs are not sent to supplier via email

    Hello all,
    During the PO ordering to supplier via email, some POs are not sent to the supplier may be due to object lock (temporary isue).
    The document output status (2) is in incorrectly processed in the table PPFTTRIGG.
    Pls help me with the parameter to be filled in the report "RSPPFPROCESS" so that i can create a variant and schedule daily.
    Regards
    Madhan

    Hello Maddan,
    If some of your action status have errors occured during processing, you cannot re-process PO edition: you have first to identify what was the error.
    So, get the application keys (PO number) from table PPFTTRIGG for which status is "2". Then, check in transactional what is exactly the error for each PO concerned.
    Regards.
    Laurent.

  • I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

  • In PHotoshop CC, my blenidng options are not working at all.  A window comes up with the message "

    In PHotoshop CC, my blenidng options are not working at all.  A window comes up with the message "Could not complete your reequest because of a program error.  "
    Linda

    In Photoshop CC whenever I try to apply blending options to a layer, an error message comes up.. In my error message log, this is what comes up
      2013:07:12 16:17:16 : tracked key 0000000000000238 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:12 16:17:16 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:07:18 19:20:19 : tracked key 0000000000000100 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:18 19:20:19 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:09:05 22:42:22 : ..\..\sources\USheetRendererCommands.cpp : 556 : REQUIRE failed 2013:09:16 17:22:13 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:16 17:22:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:37 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:25:58 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:28:01 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:34:51 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:19 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:30 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:55 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:43:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:25 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:42 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:14:16 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:25 22:04:18 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 16:58:46 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:46:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:32 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:05 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:12 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:57:02 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:03 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:40 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:49 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:17 :
    ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:53 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed

  • The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I have!

    The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I just got!

    First off, I would STRONGLY suggest that a external hard drive would make you life much easier by at least being able to back up your songs on the external drive for when you need them. Even if you don't want them in the iTunes library, you can have them all ready on the external to be re-added as needed. You can get 100's of gigs for under $100 shipped.
    Anyway, since you used Yamipod, are all the songs back on the computer? If so, I would go ahead and restore the iPod, let iTunes then resync everything back to the iPod, then switch it back to manual and see if the restore and resync clears up the issue.
    Patrick

  • After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

    After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

    Have you run it in a debugger? That will show you exactly what is happening and why.

Maybe you are looking for

  • Parallels vs. Boot Camp

    Unfortunately we find ourselves in need of Internet Explorer as a site required for work has been built for that browser only. Therefore we're trying to decide whether Parallels or Boot Camp is best for us. Accordingly I have spent hours over the las

  • IOS Game Center Integration?

    Director 12 supports iOS Game Center integration but there is no documentation.  The only documentation I have seen is this in 'Director Help / What's new for Director 12' http://helpx.adobe.com/director/using/whats-new-director-12.html "Game Center:

  • HT4721 how do you make the thesaurus present for three finger tap?

    http://support.apple.com/kb/HT4721 makes reference to thesaurs, apple and wikipedia useage if presnt.  how do yo make presnt.  rightn now only dictionary comes up.

  • How to create a Links page

    I am a new user of DW-8-on a Mac. I am working on my site: http://www.naturephotostudio.com I want to make a Links page that will allow me to add links to other sites - and maybe have it update automatically. My hope is to increase my visibility. So

  • Canon 30D and iPhoto 6

    I just switched to a Canon 30D from a Nikon D70S. When I plug the Canon in there is no recognition of it on my desktop screen. I can, however, import into iPhoto no problem but can't "safely" eject the camera. Do I just yank the USB wire when finishe