Upgrade paranoia revisited

This is an update to my "upgrade paranoia" posted several days ago.
I tried an upgrade installation from 10.3.9 to 10.4 using the DVDs I bought at the Apple store. (Probably should have used archive and restore!)
Installation went smoothly. When I did the restart we got to the apple screen and the spinning "clock" that appears during start up, which spun and spun and eventually I got the international "not" sign (circle with line diagonally). The spinner kept spinning.
I did a restore from my backup on a firewire drive and am now running 10.3.9 again. An interesting morning and nothing accomplished!
So any advice?
I did a macJanitor, disk utility, and DiskWarrior run before the install.
I have a G4 400 with an 800MHz Sonnet upgrade. Sonnet requested that I install a "Sonnetcache" installation for 10.4 which I did prior to the upgrade.
I have a Radeon 9000 Mac edition (not the card the machine came with). I think I have the latest update for their driver, but will check again.
I've got two hard drives.
Any thoughts welcomed.
G4 400Mz 800 MHz upgrade   Mac OS X (10.3.9)   1G memory

Several possibilities. First, if you did not repair the hard drive and permissions prior to your upgrade then that's a likely reason why the upgrade failed.
Further, I would remove your processor and video card, replace them with the originals. Connect only your original keyboard and mouse. Repair the hard drive and permissions then upgrade.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. If all is OK you can proceed with the OS X installation.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now, if it were up to me I would recommend you not do an Upgrade install this time. Instead do an Archive and Install. Select the option to preserve the users and network preferences. Your drive will not be erased and your old system will be archived in a Previous System Folder. A fresh copy of OS X will be installed.

Similar Messages

  • [SOLVED] VAIO brightness no longer working after upgrade

    Hi I used to set brightness on my VAIO VPCCAS1E, via...
    xfce4 -> fn keys
    i3 -> "echo 5 | sudo tee /sys/class/backlight/acpi_video0/brightness"
    none of them are working after having upgraded the system yesterday. I have checked the news and done my -Syu accordingly.
    Upgrade log:
    [2013-06-05 09:49] [PACMAN] Running 'pacman -Syu'
    [2013-06-05 09:49] [PACMAN] synchronizing package lists
    [2013-06-05 09:50] [PACMAN] starting full system upgrade
    [2013-06-05 10:29] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.VTY/foo2zjs-20130530-3-x86_64.pkg.tar.xz'
    [2013-06-05 10:31] [PACMAN] Running 'pacman -U /tmp/yaourt-tmp-szebenyib/foo2zjs-20130530-3-x86_64.pkg.tar.xz'
    [2013-06-05 10:31] [ALPM-SCRIPTLET]
    [2013-06-05 10:31] [ALPM-SCRIPTLET] Restarting cups
    [2013-06-05 10:31] [ALPM-SCRIPTLET]
    [2013-06-05 10:31] [ALPM-SCRIPTLET]
    [2013-06-05 10:31] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 10:31] [ALPM-SCRIPTLET] - -
    [2013-06-05 10:31] [ALPM-SCRIPTLET] -Remember to check for foomatic-db-foo2zjs updates as well-
    [2013-06-05 10:31] [ALPM-SCRIPTLET] - -
    [2013-06-05 10:31] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 10:31] [ALPM-SCRIPTLET]
    [2013-06-05 10:31] [PACMAN] upgraded foo2zjs (20130302-3 -> 20130530-3)
    [2013-06-05 10:34] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.JSV/plymouth-0.8.8-10-x86_64.pkg.tar.xz'
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] ==================================================================================
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 1. To make Plymouth work:
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 1.1. Add "plymouth" to HOOKS after "base" and "udev" in /etc/mkinitcpio.conf
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 1.2. Add 'quiet splash' to the grub command line
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 1.3. Rebuild your initrd image (# mkinitcpio -p [kernel preset name]).
    [2013-06-05 10:34] [ALPM-SCRIPTLET] E.g.: sudo mkinitcpio -p linux
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 2. To enable encryption, replace "encrypt" with "plymouth-encrypt" in
    [2013-06-05 10:34] [ALPM-SCRIPTLET] mkinitcpio.conf and rebuild your initrd image.
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 3. You will also need to rebuild your initrd image every time you change your theme
    [2013-06-05 10:34] [ALPM-SCRIPTLET] (the default is set as 'spinfinity').
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] To list all plymouth themes:
    [2013-06-05 10:34] [ALPM-SCRIPTLET] plymouth-set-default-theme -l
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] To change theme:
    [2013-06-05 10:34] [ALPM-SCRIPTLET] # plymouth-set-default-theme <theme>
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] To rebuild initrd image:
    [2013-06-05 10:34] [ALPM-SCRIPTLET] # mkinitcpio -p linux
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 4. For Smooth Transition to Display Manager you have to:
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 4.1. See the Wiki Page (link in 5) to prepare your Display Manager
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 4.2. Disable your Display Manager Unit
    [2013-06-05 10:34] [ALPM-SCRIPTLET] E.g. : systemctl disable kdm.service
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 4.3. Enable the respective DM-plymouth Unit (GDM,KDM,Lightdm,LXDM units provided)
    [2013-06-05 10:34] [ALPM-SCRIPTLET] E.g. : systemctl enable kdm-plymouth.service
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 5. For more information please visit the Wiki page:
    [2013-06-05 10:34] [ALPM-SCRIPTLET] https://wiki.archlinux.org/index.php/Plymouth
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] OBS. If you have any leftover "kill Plymouth" lines in /etc/rc.local or ~/.xinitrc
    [2013-06-05 10:34] [ALPM-SCRIPTLET] they are no longer required.
    [2013-06-05 10:34] [ALPM-SCRIPTLET] ==================================================================================
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [PACMAN] upgraded plymouth (0.8.8-5 -> 0.8.8-10)
    [2013-06-05 10:36] [PACMAN] Running 'pacman -U tmp/plymouth.tar.gz'
    [2013-06-05 10:36] [PACMAN] Running 'pacman -U plymouth.tar.gz'
    [2013-06-05 10:37] [PACMAN] Running 'pacman -S catalyst-utils'
    [2013-06-05 10:40] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.eGs/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
    [2013-06-05 10:40] [PACMAN] Running 'pacman -S catalyst-dkms lib32-catalyst-utils'
    [2013-06-05 10:41] [PACMAN] Running 'pacman -S catalyst'
    [2013-06-05 10:44] [PACMAN] Running 'pacman --color auto -Sy'
    [2013-06-05 10:44] [PACMAN] synchronizing package lists
    [2013-06-05 10:47] [PACMAN] Running 'pacman -S catalyst catalyst-utils'
    [2013-06-05 10:47] [PACMAN] Running 'pacman -Syu'
    [2013-06-05 10:47] [PACMAN] synchronizing package lists
    [2013-06-05 10:52] [PACMAN] Running 'pacman --color auto -Sy'
    [2013-06-05 10:52] [PACMAN] synchronizing package lists
    [2013-06-05 10:53] [PACMAN] Running 'pacman -Syu'
    [2013-06-05 10:53] [PACMAN] synchronizing package lists
    [2013-06-05 10:53] [PACMAN] Running 'pacman --color auto -Sy'
    [2013-06-05 10:53] [PACMAN] synchronizing package lists
    [2013-06-05 10:55] [PACMAN] Running 'pacman --color auto -Sy'
    [2013-06-05 10:55] [PACMAN] synchronizing package lists
    [2013-06-05 10:58] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.9k2/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:02] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.FaM/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
    [2013-06-05 11:03] [PACMAN] Running 'pacman --color auto -S --asdeps --needed multilib/lib32-libdrm'
    [2013-06-05 11:03] [PACMAN] installed lib32-libpciaccess (0.13.1-1)
    [2013-06-05 11:03] [PACMAN] installed lib32-libdrm (2.4.45-1)
    [2013-06-05 11:09] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.lze/catalyst-total-13.4-3-x86_64.pkg.tar.xz'
    [2013-06-05 11:12] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.QOe/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:14] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.MWT/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:19] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.MKV/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
    [2013-06-05 11:20] [PACMAN] Running 'pacman -U /tmp/yaourt-tmp-szebenyib/catalyst-utils-13.4-2-x86_64.pkg.tar.xz /tmp/yaourt-tmp-szebenyib/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:29] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.3qD/lib32-catalyst-utils-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:31] [PACMAN] Running 'pacman -U /tmp/yaourt-tmp-szebenyib/lib32-catalyst-utils-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:33] [PACMAN] Running 'pacman -U --force /tmp/yaourt-tmp-szebenyib/lib32-catalyst-utils-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:33] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-06-05 11:33] [ALPM-SCRIPTLET] lib32-catalyst-utils works with [multilib] repository
    [2013-06-05 11:33] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-06-05 11:33] [PACMAN] upgraded lib32-catalyst-utils (13.1-2 -> 13.4-1)
    [2013-06-05 11:33] [PACMAN] Running 'pacman -U tmp/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz tmp/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
    [2013-06-05 11:34] [PACMAN] Running 'pacman -U --force tmp/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz tmp/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
    [2013-06-05 11:34] [ALPM-SCRIPTLET] [37;44m[1m---------------- I/O BUG ---------------------------------------[0m
    [2013-06-05 11:34] [ALPM-SCRIPTLET] There's a bug in fglrx found by lano1106 which generates
    [2013-06-05 11:34] [ALPM-SCRIPTLET] great amount of unneeded I/O operations
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] To activate workaround enable systemd service:
    [2013-06-05 11:34] [ALPM-SCRIPTLET] systemctl enable temp-links-catalyst
    [2013-06-05 11:34] [ALPM-SCRIPTLET] systemctl start temp-links-catalyst
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] More infos:
    [2013-06-05 11:34] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1279977#p1279977
    [2013-06-05 11:34] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1280193#p1280193
    [2013-06-05 11:34] [ALPM-SCRIPTLET] [37;44m[1m----------------------------------------------------------------[0m
    [2013-06-05 11:34] [PACMAN] upgraded catalyst-utils (13.1-5 -> 13.4-2)
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] -------- Uninstall Beginning --------
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Module: fglrx
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Version: 13.1-2
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Kernel: 3.8.4-1-ARCH (x86_64)
    [2013-06-05 11:34] [ALPM-SCRIPTLET] -------------------------------------
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Status: Before uninstall, this module version was ACTIVE on this kernel.
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] fglrx.ko:
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Uninstallation
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Deleting from: /usr/lib/modules/3.8.4-1-ARCH/extramodules/
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Original module
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - No original module was found for this module on this kernel.
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Use the dkms install command to reinstall any previous module version.
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] depmod.......
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] DKMS: uninstall completed.
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] ------------------------------
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Deleting module version: 13.1-2
    [2013-06-05 11:34] [ALPM-SCRIPTLET] completely from the DKMS tree.
    [2013-06-05 11:34] [ALPM-SCRIPTLET] ------------------------------
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Done.
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Creating symlink /var/lib/dkms/fglrx/13.4-1/source ->
    [2013-06-05 11:34] [ALPM-SCRIPTLET] /usr/src/fglrx-13.4-1
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] DKMS: add completed.
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Kernel preparation unnecessary for this kernel. Skipping...
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Building module:
    [2013-06-05 11:34] [ALPM-SCRIPTLET] cleaning build area....
    [2013-06-05 11:34] [ALPM-SCRIPTLET] sh make.sh --nohints --uname_r=3.8.4-1-ARCH --norootcheck........
    [2013-06-05 11:34] [ALPM-SCRIPTLET] cleaning build area....
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] DKMS: build completed.
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] fglrx.ko:
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Running module version sanity check.
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Original module
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - No original module exists within this kernel
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Installation
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Installing to /usr/lib/modules/3.8.4-1-ARCH/extramodules/
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] depmod....
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] DKMS: install completed.
    [2013-06-05 11:34] [PACMAN] upgraded catalyst-dkms (13.1-2 -> 13.4-1)
    [2013-06-05 11:36] [PACMAN] Running 'pacman -R fondu'
    [2013-06-05 11:36] [PACMAN] removed fondu (060102-3)
    [2013-06-05 11:50] [PACMAN] Running 'pacman --color auto -U --force /tmp/yaourt-tmp-szebenyib/PKGDEST.nWC/foo2zjs-20130530-3-x86_64.pkg.tar.xz'
    [2013-06-05 11:50] [ALPM-SCRIPTLET]
    [2013-06-05 11:50] [ALPM-SCRIPTLET] Restarting cups
    [2013-06-05 11:50] [ALPM-SCRIPTLET]
    [2013-06-05 11:50] [ALPM-SCRIPTLET]
    [2013-06-05 11:50] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 11:50] [ALPM-SCRIPTLET] - -
    [2013-06-05 11:50] [ALPM-SCRIPTLET] -Remember to check for foomatic-db-foo2zjs updates as well-
    [2013-06-05 11:50] [ALPM-SCRIPTLET] - -
    [2013-06-05 11:50] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 11:50] [ALPM-SCRIPTLET]
    [2013-06-05 11:50] [PACMAN] reinstalled foo2zjs (20130530-3)
    [2013-06-05 11:50] [PACMAN] Running 'pacman -R foomatic-db-foo2zjs'
    [2013-06-05 11:51] [PACMAN] Running 'pacman -R foomatic-db-foo2zjs foo2zjs'
    [2013-06-05 11:51] [ALPM-SCRIPTLET]
    [2013-06-05 11:51] [ALPM-SCRIPTLET] Restarting cups
    [2013-06-05 11:51] [ALPM-SCRIPTLET]
    [2013-06-05 11:51] [ALPM-SCRIPTLET]
    [2013-06-05 11:51] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 11:51] [ALPM-SCRIPTLET] - -
    [2013-06-05 11:51] [ALPM-SCRIPTLET] - Remember to replace foomatic-db-foo2zjs with -
    [2013-06-05 11:51] [ALPM-SCRIPTLET] - foomatic-db from [extra]. -
    [2013-06-05 11:51] [ALPM-SCRIPTLET] - -
    [2013-06-05 11:51] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 11:51] [ALPM-SCRIPTLET]
    [2013-06-05 11:51] [PACMAN] removed foo2zjs (20130530-3)
    [2013-06-05 11:51] [PACMAN] removed foomatic-db-foo2zjs (4.0.17_20120712-2)
    [2013-06-05 11:51] [PACMAN] Running 'pacman --color auto -S --asdeps --needed --noconfirm extra/enscript'
    [2013-06-05 11:51] [PACMAN] installed enscript (1.6.5.2-2)
    [2013-06-05 12:05] [PACMAN] Running 'pacman --color auto -U --asdeps --noconfirm /tmp/yaourt-tmp-szebenyib/PKGDEST.yFz/foomatic-db-foo2zjs-1:4.0.17_20130518-1-x86_64.pkg.tar.xz'
    [2013-06-05 12:05] [PACMAN] installed foomatic-db-foo2zjs (1:4.0.17_20130518-1)
    [2013-06-05 12:13] [PACMAN] Running 'pacman --color auto -U --noconfirm /tmp/yaourt-tmp-szebenyib/PKGDEST.N1v/foo2zjs-20130530-3-x86_64.pkg.tar.xz'
    [2013-06-05 12:13] [ALPM-SCRIPTLET]
    [2013-06-05 12:13] [ALPM-SCRIPTLET] Restarting cups
    [2013-06-05 12:13] [ALPM-SCRIPTLET]
    [2013-06-05 12:13] [ALPM-SCRIPTLET]
    [2013-06-05 12:13] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - You need to add your user to the lp group. -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - Please refer to the table at http://foo2zjs.rkkda.com/ -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - to choose the appropriate driver for your printer. -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 12:13] [ALPM-SCRIPTLET]
    [2013-06-05 12:13] [PACMAN] installed foo2zjs (20130530-3)
    [2013-06-05 12:30] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.omZ/plymouth-0.8.8-10-x86_64.pkg.tar.xz'
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] ==================================================================================
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 1. To make Plymouth work:
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 1.1. Add "plymouth" to HOOKS after "base" and "udev" in /etc/mkinitcpio.conf
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 1.2. Add 'quiet splash' to the grub command line
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 1.3. Rebuild your initrd image (# mkinitcpio -p [kernel preset name]).
    [2013-06-05 12:30] [ALPM-SCRIPTLET] E.g.: sudo mkinitcpio -p linux
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 2. To enable encryption, replace "encrypt" with "plymouth-encrypt" in
    [2013-06-05 12:30] [ALPM-SCRIPTLET] mkinitcpio.conf and rebuild your initrd image.
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 3. You will also need to rebuild your initrd image every time you change your theme
    [2013-06-05 12:30] [ALPM-SCRIPTLET] (the default is set as 'spinfinity').
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] To list all plymouth themes:
    [2013-06-05 12:30] [ALPM-SCRIPTLET] plymouth-set-default-theme -l
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] To change theme:
    [2013-06-05 12:30] [ALPM-SCRIPTLET] # plymouth-set-default-theme <theme>
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] To rebuild initrd image:
    [2013-06-05 12:30] [ALPM-SCRIPTLET] # mkinitcpio -p linux
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 4. For Smooth Transition to Display Manager you have to:
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 4.1. See the Wiki Page (link in 5) to prepare your Display Manager
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 4.2. Disable your Display Manager Unit
    [2013-06-05 12:30] [ALPM-SCRIPTLET] E.g. : systemctl disable kdm.service
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 4.3. Enable the respective DM-plymouth Unit (GDM,KDM,Lightdm,LXDM units provided)
    [2013-06-05 12:30] [ALPM-SCRIPTLET] E.g. : systemctl enable kdm-plymouth.service
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 5. For more information please visit the Wiki page:
    [2013-06-05 12:30] [ALPM-SCRIPTLET] https://wiki.archlinux.org/index.php/Plymouth
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] OBS. If you have any leftover "kill Plymouth" lines in /etc/rc.local or ~/.xinitrc
    [2013-06-05 12:30] [ALPM-SCRIPTLET] they are no longer required.
    [2013-06-05 12:30] [ALPM-SCRIPTLET] ==================================================================================
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [PACMAN] reinstalled plymouth (0.8.8-10)
    [2013-06-05 12:30] [PACMAN] Running 'pacman --color auto -S --asdeps --needed community/audit'
    [2013-06-05 12:30] [PACMAN] installed audit (2.2.3-2)
    [2013-06-05 12:32] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.8WE/e4rat-0.2.3-2-x86_64.pkg.tar.xz'
    [2013-06-05 12:32] [PACMAN] upgraded e4rat (0.2.3-1 -> 0.2.3-2)
    [2013-06-05 12:39] [PACMAN] Running 'pacman -R plymouth'
    [2013-06-05 12:39] [PACMAN] removed plymouth (0.8.8-10)
    [2013-06-05 12:41] [PACMAN] Running 'pacman -Syu --ignore filesystem,bash'
    [2013-06-05 12:41] [PACMAN] synchronizing package lists
    [2013-06-05 12:41] [PACMAN] starting full system upgrade
    [2013-06-05 13:04] [PACMAN] upgraded linux-api-headers (3.7.4-1 -> 3.8.4-1)
    [2013-06-05 13:04] [PACMAN] upgraded tzdata (2013b-1 -> 2013c-1)
    [2013-06-05 13:04] [ALPM-SCRIPTLET] Generating locales...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] en_US.UTF-8... done
    [2013-06-05 13:04] [ALPM-SCRIPTLET] hu_HU.UTF-8... done
    [2013-06-05 13:04] [ALPM-SCRIPTLET] Generation complete.
    [2013-06-05 13:04] [PACMAN] upgraded glibc (2.17-3 -> 2.17-6)
    [2013-06-05 13:04] [PACMAN] upgraded lib32-glibc (2.17-2 -> 2.17-5)
    [2013-06-05 13:04] [PACMAN] upgraded lib32-gcc-libs (4.7.2-4 -> 4.8.1-1)
    [2013-06-05 13:04] [PACMAN] upgraded gcc-libs-multilib (4.7.2-4 -> 4.8.1-1)
    [2013-06-05 13:04] [PACMAN] upgraded pcre (8.32-1 -> 8.33-1)
    [2013-06-05 13:04] [PACMAN] upgraded glib2 (2.34.3-1 -> 2.36.2-1)
    [2013-06-05 13:04] [PACMAN] upgraded zlib (1.2.7-1 -> 1.2.8-1)
    [2013-06-05 13:04] [PACMAN] upgraded cracklib (2.8.22-1 -> 2.8.22-3)
    [2013-06-05 13:04] [PACMAN] upgraded libtirpc (0.2.2-4 -> 0.2.3-1)
    [2013-06-05 13:04] [PACMAN] upgraded pam (1.1.6-1 -> 1.1.6-4)
    [2013-06-05 13:04] [PACMAN] upgraded expat (2.1.0-1 -> 2.1.0-2)
    [2013-06-05 13:04] [PACMAN] upgraded gmp (5.1.1-1 -> 5.1.2-1)
    [2013-06-05 13:04] [PACMAN] upgraded libcap (2.22-3 -> 2.22-5)
    [2013-06-05 13:04] [PACMAN] upgraded coreutils (8.21-1 -> 8.21-2)
    [2013-06-05 13:04] [PACMAN] upgraded dbus (1.6.8-6 -> 1.6.10-1)
    [2013-06-05 13:04] [PACMAN] upgraded kbd (1.15.5-3 -> 1.15.5-4)
    [2013-06-05 13:04] [PACMAN] upgraded kmod (12-1 -> 13-2)
    [2013-06-05 13:04] [PACMAN] upgraded hwids (20130228-1 -> 20130512-1)
    [2013-06-05 13:04] [PACMAN] upgraded libgcrypt (1.5.1-1 -> 1.5.2-1)
    [2013-06-05 13:04] [PACMAN] upgraded shadow (4.1.5.1-5 -> 4.1.5.1-6)
    [2013-06-05 13:04] [PACMAN] upgraded util-linux (2.22.2-2 -> 2.23.1-2)
    [2013-06-05 13:04] [ALPM-SCRIPTLET] ==> The /bin/systemd symlink has been removed. Any references in your
    [2013-06-05 13:04] [ALPM-SCRIPTLET] bootloader (or elsewhere) must be updated to /usr/lib/systemd/systemd.
    [2013-06-05 13:04] [PACMAN] upgraded systemd (198-2 -> 204-3)
    [2013-06-05 13:04] [PACMAN] upgraded nspr (4.9.5-1 -> 4.9.6-1)
    [2013-06-05 13:04] [PACMAN] installed js185 (1.0.0-2)
    [2013-06-05 13:04] [PACMAN] upgraded polkit (0.110-1 -> 0.110-2)
    [2013-06-05 13:04] [PACMAN] upgraded accountsservice (0.6.30-1 -> 0.6.32-1)
    [2013-06-05 13:04] [PACMAN] upgraded acpid (2.0.18-2 -> 2.0.19-1)
    [2013-06-05 13:04] [PACMAN] upgraded alsa-lib (1.0.26-1 -> 1.0.27.1-1)
    [2013-06-05 13:04] [PACMAN] upgraded alsa-plugins (1.0.26-1 -> 1.0.27-1)
    [2013-06-05 13:04] [PACMAN] upgraded dialog (1.2_20121230-1 -> 1.2_20130523-1)
    [2013-06-05 13:04] [PACMAN] upgraded pciutils (3.1.10-1 -> 3.2.0-3)
    [2013-06-05 13:04] [PACMAN] upgraded psmisc (22.19-1 -> 22.20-1)
    [2013-06-05 13:04] [PACMAN] upgraded alsa-utils (1.0.26-1 -> 1.0.27.1-2)
    [2013-06-05 13:04] [PACMAN] upgraded libsasl (2.1.26-2 -> 2.1.26-4)
    [2013-06-05 13:04] [PACMAN] upgraded e2fsprogs (1.42.7-1 -> 1.42.7-2)
    [2013-06-05 13:04] [PACMAN] upgraded libldap (2.4.34-1 -> 2.4.35-4)
    [2013-06-05 13:04] [PACMAN] upgraded apr-util (1.5.1-1 -> 1.5.2-1)
    [2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Kulcsok hozzáfűzése a(z) archlinux.gpg fájlból...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
    [2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: depth: 0 valid: 1 signed: 6 trust: 0-, 0q, 0n, 0m, 0f, 1u
    [2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: depth: 1 valid: 6 signed: 64 trust: 1-, 0q, 0n, 5m, 0f, 0u
    [2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: depth: 2 valid: 63 signed: 3 trust: 63-, 0q, 0n, 0m, 0f, 0u
    [2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: A bizalmi adatbázis következő ellenőrzése: 2014-01-22.
    [2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Megbízható kulcsok aláírása helyileg a kulcstartóban...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> 0E8B644079F599DFC1DDC3973348882F6AC6A4C2 kulcs aláírása helyileg...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> 684148BB25B49E986A4944C55184252D824B18E8 kulcs aláírása helyileg...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> 44D4A033AC140143927397D47EFD567D4C7EA887 kulcs aláírása helyileg...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> 27FFC4769E19F096D41D9265A04F9397CDFD6BB0 kulcs aláírása helyileg...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> AB19265E5D7D20687D303246BA1DFB64FFF979E7 kulcs aláírása helyileg...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Megbízhatósági értékek importálása...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Visszavont kulcsok tiltása a kulcstartóban...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> 1390420191 kulcs tiltása...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> E2539214C6C11350 kulcs tiltása...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> 8544EA82113502DE kulcs tiltása...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Megbízhatósági adatbázis frissítése...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: A bizalmi adatbázis következő ellenőrzése: 2014-01-22.
    [2013-06-05 13:04] [PACMAN] upgraded archlinux-keyring (20130224-1 -> 20130525-1)
    [2013-06-05 13:04] [PACMAN] upgraded libxau (1.0.7-1 -> 1.0.8-1)
    [2013-06-05 13:04] [PACMAN] upgraded libxcb (1.9-3 -> 1.9.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded libx11 (1.5.0-2 -> 1.6.0-1)
    [2013-06-05 13:05] [PACMAN] upgraded libxext (1.3.1-1 -> 1.3.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded libxi (1.7-1 -> 1.7.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded libxfixes (5.0-2 -> 5.0.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded libxtst (1.2.1-1 -> 1.2.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded at-spi2-core (2.6.3-1 -> 2.8.0-1)
    [2013-06-05 13:05] [PACMAN] upgraded atk (2.6.0-1 -> 2.8.0-1)
    [2013-06-05 13:05] [PACMAN] upgraded at-spi2-atk (2.6.2-1 -> 2.8.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded libsigc++ (2.2.11-1 -> 2.3.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded glibmm (2.34.1-1 -> 2.36.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded atkmm (2.22.6-1 -> 2.22.7-1)
    [2013-06-05 13:05] [PACMAN] upgraded perl (5.16.3-1 -> 5.18.0-1)
    [2013-06-05 13:05] [PACMAN] upgraded automake (1.13.1-1 -> 1.13.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded avahi (0.6.31-6 -> 0.6.31-9)
    [2013-06-05 13:05] [PACMAN] upgraded libpng (1.5.14-1 -> 1.6.2-3)
    [2013-06-05 13:05] [ALPM-SCRIPTLET] updating font cache... done.
    [2013-06-05 13:05] [PACMAN] upgraded fontconfig (2.10.2-1 -> 2.10.93-1)
    [2013-06-05 13:05] [PACMAN] upgraded pixman (0.28.2-1 -> 0.30.0-1)
    [2013-06-05 13:05] [PACMAN] upgraded libdrm (2.4.43-1 -> 2.4.45-1)
    [2013-06-05 13:05] [PACMAN] upgraded wayland (1.0.6-1 -> 1.1.0-1)
    [2013-06-05 13:05] [PACMAN] upgraded libxxf86vm (1.1.2-1 -> 1.1.3-1)
    [2013-06-05 13:05] [PACMAN] installed llvm-amdgpu-lib-snapshot (20130403-3)
    [2013-06-05 13:05] [PACMAN] upgraded mesa (9.1.1-1 -> 9.1.3-1)
    [2013-06-05 13:05] [PACMAN] upgraded cairo (1.12.14-3 -> 1.12.14-4)
    [2013-06-05 13:05] [PACMAN] upgraded libjpeg-turbo (1.2.1-1 -> 1.3.0-2)
    [2013-06-05 13:05] [PACMAN] upgraded libtiff (4.0.3-1 -> 4.0.3-2)
    [2013-06-05 13:05] [ALPM-SCRIPTLET] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libpng15.so.15: cannot open shared object file: No such file or directory
    [2013-06-05 13:05] [PACMAN] upgraded gdk-pixbuf2 (2.26.5-2 -> 2.28.1-2)
    [2013-06-05 13:05] [PACMAN] upgraded giflib (4.1.6-5 -> 4.2.1-2)
    [2013-06-05 13:05] [PACMAN] upgraded imlib2 (1.4.5-2 -> 1.4.5-4)
    [2013-06-05 13:05] [PACMAN] upgraded libxcursor (1.1.13-1 -> 1.1.14-1)
    [2013-06-05 13:05] [PACMAN] upgraded lua (5.2.1-3 -> 5.2.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded icu (51.1-1 -> 51.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded graphite (1:1.2.1-1 -> 1:1.2.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded harfbuzz (0.9.14-1 -> 0.9.17-2)
    [2013-06-05 13:05] [ALPM-SCRIPTLET] /tmp/alpm_DTKAFN/.INSTALL: sor: 5: sbin/ldconfig: Nincs ilyen fájl vagy könyvtár
    [2013-06-05 13:05] [PACMAN] upgraded pango (1.32.5-1 -> 1.34.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded awesome (3.5-2 -> 3.5.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded bash-completion (2.0-3 -> 2.1-2)
    [2013-06-05 13:05] [PACMAN] upgraded binutils-multilib (2.23.1-3 -> 2.23.2-2)
    [2013-06-05 13:05] [PACMAN] upgraded m4 (1.4.16-2 -> 1.4.16-3)
    [2013-06-05 13:05] [PACMAN] upgraded bison (2.7-1 -> 2.7.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded sqlite (3.7.16.1-1 -> 3.7.17-1)
    [2013-06-05 13:05] [PACMAN] upgraded python2 (2.7.3-4 -> 2.7.5-1)
    [2013-06-05 13:05] [PACMAN] upgraded bluez (4.101-1 -> 4.101-2)
    [2013-06-05 13:05] [PACMAN] upgraded gtk-update-icon-cache (2.24.17-1 -> 2.24.18-1)
    [2013-06-05 13:05] [PACMAN] upgraded librsvg (2.36.4-1 -> 2.37.0-2)
    [2013-06-05 13:06] [PACMAN] upgraded gnome-icon-theme-symbolic (3.6.2-1 -> 3.8.2.2-1)
    [2013-06-05 13:06] [PACMAN] upgraded gnome-icon-theme (3.6.2-1 -> 3.8.2-1)
    [2013-06-05 13:06] [PACMAN] upgraded libpulse (3.0-2 -> 3.0-3)
    [2013-06-05 13:06] [PACMAN] upgraded libusbx (1.0.14-1 -> 1.0.15-1)
    [2013-06-05 13:06] [PACMAN] upgraded openobex (1.5-3 -> 1.7-5)
    [2013-06-05 13:06] [PACMAN] upgraded libltdl (2.4.2-7 -> 2.4.2-9)
    [2013-06-05 13:06] [PACMAN] upgraded libxt (1.1.3-1 -> 1.1.4-1)
    [2013-06-05 13:06] [PACMAN] upgraded liblqr (0.4.1-3 -> 0.4.2-1)
    [2013-06-05 13:06] [PACMAN] upgraded imagemagick (6.8.4.0-1 -> 6.8.5.7-1)
    [2013-06-05 13:06] [PACMAN] upgraded obex-data-server (0.4.6-5 -> 0.4.6-7)
    [2013-06-05 13:06] [PACMAN] upgraded blueman (1.23-5 -> 1.23-6)
    [2013-06-05 13:06] [PACMAN] upgraded boost-libs (1.52.0-3 -> 1.53.0-2)
    [2013-06-05 13:06] [PACMAN] upgraded boost (1.52.0-3 -> 1.53.0-2)
    [2013-06-05 13:06] [PACMAN] upgraded sed (4.2.2-2 -> 4.2.2-3)
    [2013-06-05 13:06] [PACMAN] upgraded ca-certificates (20130119-1 -> 20130119-2)
    [2013-06-05 13:06] [PACMAN] upgraded ca-certificates-java (20121112+nmu2-1 -> 20121112+nmu2-2)
    [2013-06-05 13:06] [PACMAN] upgraded cairo-perl (1.082-2 -> 1.103-2)
    [2013-06-05 13:06] [PACMAN] upgraded cairomm (1.10.0-2 -> 1.10.0-3)
    [2013-06-05 13:06] [PACMAN] upgraded libxml2 (2.8.0-1 -> 2.9.1-2)
    [2013-06-05 13:06] [PACMAN] upgraded libbluray (0.2.3-1 -> 0.3.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded libva (1.1.0-2 -> 1.1.1-1)
    [2013-06-05 13:06] [PACMAN] upgraded libvpx (1.1.0-1 -> 1.2.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded openjpeg (1.5.0-1 -> 1.5.1-1)
    [2013-06-05 13:06] [PACMAN] upgraded opus (1.0.2-1 -> 1.0.2-2)
    [2013-06-05 13:06] [PACMAN] upgraded rtmpdump (20121203-1 -> 20121203-2)
    [2013-06-05 13:06] [PACMAN] upgraded v4l-utils (0.9.3-2 -> 0.9.5-2)
    [2013-06-05 13:06] [PACMAN] upgraded ffmpeg (1:1.2-1 -> 1:1.2.1-1)
    [2013-06-05 13:06] [PACMAN] upgraded chromaprint (0.7-4 -> 0.7-5)
    [2013-06-05 13:06] [PACMAN] upgraded keyutils (1.5.5-3 -> 1.5.5-5)
    [2013-06-05 13:06] [PACMAN] upgraded krb5 (1.11.1-1 -> 1.11.2-4)
    [2013-06-05 13:06] [PACMAN] installed libbsd (0.4.2-1)
    [2013-06-05 13:06] [PACMAN] upgraded libwbclient (3.6.13-1 -> 4.0.6-1)
    [2013-06-05 13:06] [PACMAN] upgraded cifs-utils (5.9-1 -> 6.0-2)
    [2013-06-05 13:06] [PACMAN] upgraded cogl (1.10.4-1 -> 1.14.0-3)
    [2013-06-05 13:06] [PACMAN] upgraded json-glib (0.15.2-1 -> 0.16.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded xkeyboard-config (2.8-1 -> 2.9-1)
    [2013-06-05 13:06] [PACMAN] upgraded libxkbcommon (0.2.0-3 -> 0.3.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded clutter (1.12.2-1 -> 1.14.4-2)
    [2013-06-05 13:06] [PACMAN] upgraded libtasn1 (3.2-1 -> 3.3-1)
    [2013-06-05 13:06] [PACMAN] upgraded nettle (2.6-1 -> 2.7.1-1)
    [2013-06-05 13:06] [PACMAN] upgraded p11-kit (0.13-1 -> 0.18.2-1)
    [2013-06-05 13:06] [PACMAN] upgraded gnutls (3.1.10-1 -> 3.2.1-1)
    [2013-06-05 13:06] [PACMAN] upgraded libcups (1.6.2-1 -> 1.6.2-2)
    [2013-06-05 13:06] [PACMAN] upgraded libxinerama (1.1.2-1 -> 1.1.3-1)
    [2013-06-05 13:06] [PACMAN] upgraded libxrandr (1.4.0-1 -> 1.4.1-1)
    [2013-06-05 13:06] [PACMAN] upgraded libgusb (0.1.4-1 -> 0.1.6-1)
    [2013-06-05 13:06] [PACMAN] upgraded dconf (0.14.1-1 -> 0.16.0-1)
    [2013-06-05 13:06] [ALPM] warning: /etc/colord.conf installed as /etc/colord.conf.pacnew
    [2013-06-05 13:06] [PACMAN] upgraded colord (0.1.31-1 -> 1.0.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded gtk3 (3.6.4-2 -> 3.8.2-1)
    [2013-06-05 13:06] [PACMAN] upgraded clutter-gtk (1.4.2-1 -> 1.4.4-1)
    [2013-06-05 13:06] [PACMAN] upgraded curl (7.29.0-2 -> 7.30.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded cmake (2.8.10.2-5 -> 2.8.11-2)
    [2013-06-05 13:06] [PACMAN] upgraded cpupower (3.8-1 -> 3.9-3)
    [2013-06-05 13:06] [PACMAN] upgraded cronie (1.4.9-2 -> 1.4.9-4)
    [2013-06-05 13:06] [PACMAN] upgraded device-mapper (2.02.98-3 -> 2.02.98-4)
    [2013-06-05 13:06] [PACMAN] upgraded popt (1.16-5 -> 1.16-6)
    [2013-06-05 13:06] [PACMAN] upgraded cryptsetup (1.6.0-1 -> 1.6.1-2)
    [2013-06-05 13:06] [PACMAN] upgraded poppler (0.22.2-1 -> 0.22.4-1)
    [2013-06-05 13:06] [PACMAN] upgraded qpdf (4.0.1-1 -> 4.1.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded cups-filters (1.0.31-1 -> 1.0.34-4)
    [2013-06-05 13:07] [PACMAN] upgraded cups (1.6.2-1 -> 1.6.2-2)
    [2013-06-05 13:07] [PACMAN] upgraded dash (0.5.7-3 -> 0.5.7-4)
    [2013-06-05 13:07] [PACMAN] upgraded iptables (1.4.18-1 -> 1.4.19.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded iproute2 (3.8.0-1 -> 3.9.0-2)
    [2013-06-05 13:07] [PACMAN] upgraded dhclient (4.2.5-1 -> 4.2.5.p1-2)
    [2013-06-05 13:07] [PACMAN] upgraded dhcpcd (5.6.7-1 -> 5.6.8-3)
    [2013-06-05 13:07] [PACMAN] upgraded libksba (1.2.0-3 -> 1.3.0-1)
    [2013-06-05 13:07] [PACMAN] upgraded dirmngr (1.1.0-4 -> 1.1.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded gcc-multilib (4.7.2-4 -> 4.8.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded dkms (2.2.0.3-13 -> 2.2.0.3-14)
    [2013-06-05 13:07] [PACMAN] upgraded libxslt (1.1.26-3 -> 1.1.28-1)
    [2013-06-05 13:07] [PACMAN] upgraded docbook-xsl (1.78.0-1 -> 1.78.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded gtk2 (2.24.17-1 -> 2.24.18-1)
    [2013-06-05 13:07] [PACMAN] upgraded dropbox (1.6.16-1 -> 2.0.16-1)
    [2013-06-05 13:07] [ALPM-SCRIPTLET] /tmp/alpm_NMeaOd/.INSTALL: sor: 9: sbin/ldconfig: Nincs ilyen fájl vagy könyvtár
    [2013-06-05 13:07] [PACMAN] upgraded fakeroot (1.18.4-1 -> 1.19-1)
    [2013-06-05 13:07] [PACMAN] upgraded file-roller (3.6.3-2 -> 3.8.2-1)
    [2013-06-05 13:07] [PACMAN] upgraded wxgtk (2.8.12.1-4 -> 2.8.12.1-5)
    [2013-06-05 13:07] [PACMAN] upgraded filezilla (3.6.0.2-1 -> 3.7.0.2-1)
    [2013-06-05 13:07] [PACMAN] upgraded nss (3.14.3-2 -> 3.14.3-3)
    [2013-06-05 13:07] [PACMAN] upgraded firefox (19.0.2-1 -> 21.0-1)
    [2013-06-05 13:07] [PACMAN] upgraded libogg (1.3.0-1 -> 1.3.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded flac (1.2.1-3 -> 1.3.0-1)
    [2013-06-05 13:07] [PACMAN] upgraded flashplugin (11.2.202.275-1 -> 11.2.202.285-1)
    [2013-06-05 13:07] [PACMAN] upgraded foomatic-filters (1:4.0.17_20120712-1 -> 1:4.0.17_20130518-1)
    [2013-06-05 13:07] [PACMAN] upgraded foomatic-db-engine (1:4.0.17_20120712-1 -> 1:4.0.17_20130518-1)
    [2013-06-05 13:07] [PACMAN] upgraded freeglut (2.8.0-2 -> 2.8.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded fuse (2.9.2-1 -> 2.9.2-3)
    [2013-06-05 13:07] [PACMAN] upgraded libxfce4util (4.10.0-1 -> 4.10.1-2)
    [2013-06-05 13:07] [PACMAN] upgraded garcon (0.2.0-1 -> 0.2.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded gawk (4.0.2-1 -> 4.1.0-1)
    [2013-06-05 13:07] [PACMAN] upgraded gconf (3.2.6-1 -> 3.2.6-2)
    [2013-06-05 13:07] [PACMAN] upgraded gcr (3.6.2-2 -> 3.8.2-1)
    [2013-06-05 13:07] [PACMAN] upgraded gd (2.0.36RC1-5 -> 2.0.36RC1-6)
    [2013-06-05 13:07] [PACMAN] upgraded geany (1.23-1 -> 1.23.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded geoip-database (20130206-1 -> 20130514-1)
    [2013-06-05 13:07] [PACMAN] upgraded geoip (1.4.8-2 -> 1.5.0-1)
    [2013-06-05 13:07] [PACMAN] upgraded ghostscript (9.07-1 -> 9.07-2)
    [2013-06-05 13:07] [PACMAN] upgraded perl-error (0.17019-1 -> 0.17020-1)
    [2013-06-05 13:07] [PACMAN] upgraded git (1.8.2-1 -> 1.8.3-1)
    [2013-06-05 13:07] [PACMAN] upgraded libproxy (0.4.11-1 -> 0.4.11-2)
    [2013-06-05 13:07] [PACMAN] upgraded gsettings-desktop-schemas (3.6.1-1 -> 3.8.2-1)
    [2013-06-05 13:07] [PACMAN] upgraded glib-networking (2.34.2-1 -> 2.36.2-1)
    [2013-06-05 13:07] [PACMAN] upgraded glib-perl (1.260-1 -> 1.280-3)
    [2013-06-05 13:07] [PACMAN] upgraded gmtk (1.0.7-1 -> 1.0.8-1)
    [2013-06-05 13:07] [PACMAN] upgraded libatasmart (0.19-1 -> 0.19-2)
    [2013-06-05 13:07] [PACMAN] upgraded udisks2 (2.0.1-1 -> 2.1.0-3)
    [2013-06-05 13:07] [PACMAN] upgraded libsecret (0.14-1 -> 0.15-1)
    [2013-06-05 13:08] [PACMAN] upgraded gnome-disk-utility (3.6.1-1 -> 3.8.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded lirc-utils (1:0.9.0-39 -> 1:0.9.0-46)
    [2013-06-05 13:08] [PACMAN] installed tevent (0.9.18-1)
    [2013-06-05 13:08] [PACMAN] installed ldb (1.1.15-1)
    [2013-06-05 13:08] [PACMAN] upgraded smbclient (3.6.13-1 -> 4.0.6-1)
    [2013-06-05 13:08] [PACMAN] upgraded libxxf86dga (1.1.3-1 -> 1.1.4-1)
    [2013-06-05 13:08] [PACMAN] upgraded mpg123 (1.15.1-1 -> 1.15.4-1)
    [2013-06-05 13:08] [PACMAN] upgraded libcdio-paranoia (10.2+0.90-1 -> 10.2+0.90+1-1)
    [2013-06-05 13:08] [PACMAN] upgraded mplayer (35920-1 -> 36285-1)
    [2013-06-05 13:08] [PACMAN] upgraded gnome-mplayer (1.0.7-2 -> 1.0.8-1)
    [2013-06-05 13:08] [PACMAN] upgraded pango-perl (1.223-2 -> 1.224-2)
    [2013-06-05 13:08] [PACMAN] upgraded gtk2-perl (1.244-1 -> 1.247-2)
    [2013-06-05 13:08] [PACMAN] upgraded gnome-vfs-perl (1.081-6 -> 1.081-7)
    [2013-06-05 13:08] [PACMAN] upgraded gnomecanvas-perl (1.002-10 -> 1.002-11)
    [2013-06-05 13:08] [PACMAN] upgraded pinentry (0.8.2-2 -> 0.8.3-1)
    [2013-06-05 13:08] [PACMAN] upgraded gnupg (2.0.19-6 -> 2.0.20-2)
    [2013-06-05 13:08] [PACMAN] upgraded python2-mako (0.7.3-1 -> 0.8.1-1)
    [2013-06-05 13:08] [PACMAN] upgraded gobject-introspection (1.34.2-1 -> 1.36.0-1)
    [2013-06-05 13:08] [PACMAN] upgraded parted (3.1-1 -> 3.1-2)
    [2013-06-05 13:08] [PACMAN] upgraded pangomm (2.28.4-1 -> 2.34.0-1)
    [2013-06-05 13:08] [PACMAN] upgraded gtkmm (2.24.2-2 -> 2.24.3-1)
    [2013-06-05 13:08] [PACMAN] upgraded gparted (0.15.0-1 -> 0.16.1-5)
    [2013-06-05 13:08] [PACMAN] upgraded gpgme (1.3.2-1 -> 1.4.1-1)
    [2013-06-05 13:08] [PACMAN] upgraded gpm (1.20.7-1 -> 1.20.7-3)
    [2013-06-05 13:08] [PACMAN] upgraded groff (1.22.2-2 -> 1.22.2-3)
    [2013-06-05 13:08] [PACMAN] upgraded gstreamer0.10 (0.10.36-1 -> 0.10.36-2)
    [2013-06-05 13:08] [PACMAN] upgraded gstreamer0.10-good (0.10.31-1 -> 0.10.31-3)
    [2013-06-05 13:08] [ALPM-SCRIPTLET] /tmp/alpm_i2PHDJ/.INSTALL: sor: 18: usr/sbin/gconfpkg: Nincs ilyen fájl vagy könyvtár
    [2013-06-05 13:08] [ALPM-SCRIPTLET] /tmp/alpm_EvtktN/.INSTALL: sor: 4: usr/sbin/gconfpkg: Nincs ilyen fájl vagy könyvtár
    [2013-06-05 13:08] [PACMAN] upgraded gstreamer0.10-good-plugins (0.10.31-1 -> 0.10.31-3)
    [2013-06-05 13:08] [PACMAN] installed gstreamer (1.0.7-1)
    [2013-06-05 13:08] [PACMAN] upgraded orc (0.4.16-1 -> 0.4.17-1)
    [2013-06-05 13:08] [PACMAN] upgraded libxv (1.0.7-1 -> 1.0.8-1)
    [2013-06-05 13:08] [PACMAN] installed gst-plugins-base-libs (1.0.7-1)
    [2013-06-05 13:08] [PACMAN] upgraded libwebp (0.2.1-1 -> 0.3.0-3)
    [2013-06-05 13:08] [PACMAN] installed geoclue (0.12.99-1)
    [2013-06-05 13:08] [PACMAN] installed webkitgtk3 (2.0.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded gthumb (3.1.2-1 -> 3.2.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded gtkmm3 (3.6.0-1 -> 3.8.1-1)
    [2013-06-05 13:08] [PACMAN] upgraded gvfs (1.14.2-4 -> 1.16.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded gvfs-smb (1.14.2-4 -> 1.16.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded vim-runtime (7.3.875-1 -> 7.3.918-2)
    [2013-06-05 13:08] [PACMAN] upgraded ruby (2.0.0_p0-1 -> 2.0.0_p195-1)
    [2013-06-05 13:08] [PACMAN] upgraded gvim (7.3.875-1 -> 7.3.918-2)
    [2013-06-05 13:08] [PACMAN] upgraded hddtemp (0.3.beta15.52-1 -> 0.3.beta15.52-2)
    [2013-06-05 13:08] [PACMAN] upgraded hdparm (9.43-1 -> 9.43-2)
    [2013-06-05 13:08] [PACMAN] upgraded pygobject-devel (3.4.2-1 -> 3.8.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded python2-gobject (3.4.2-1 -> 3.8.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded ibus (1.5.1-1 -> 1.5.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded jre7-openjdk-headless (7.u17_2.3.8-1 -> 7.u21_2.3.9-4)
    [2013-06-05 13:08] [PACMAN] upgraded jre7-openjdk (7.u17_2.3.8-1 -> 7.u21_2.3.9-4)
    [2013-06-05 13:08] [PACMAN] upgraded icedtea-web-java7 (1.3.1-2 -> 1.4-1)
    [2013-06-05 13:08] [PACMAN] upgraded ilmbase (1.0.3-1 -> 2.0.0-1)
    [2013-06-05 13:08] [PACMAN] upgraded inetutils (1.9.1-4 -> 1.9.1-6)
    [2013-06-05 13:08] [PACMAN] upgraded python (3.3.0-3 -> 3.3.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded iotop (0.5-1 -> 0.5-2)
    [2013-06-05 13:08] [PACMAN] upgraded iputils (20121221-1 -> 20121221-2)
    [2013-06-05 13:08] [PACMAN] upgraded isl (0.11.1-1 -> 0.11.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded jbig2dec (0.11-5 -> 0.11-6)
    [2013-06-05 13:08] [PACMAN] upgraded jdk7-openjdk (7.u17_2.3.8-1 -> 7.u21_2.3.9-4)
    [2013-06-05 13:08] [PACMAN] upgraded jfsutils (1.1.15-3 -> 1.1.15-4)
    [2013-06-05 13:08] [PACMAN] upgraded js (1.8.5-3 -> 17.0.0-1)
    [2013-06-05 13:08] [PACMAN] upgraded strigi (0.7.8-2 -> 0.7.8-3)
    [2013-06-05 13:09] [PACMAN] upgraded qt4 (4.8.4-16 -> 4.8.4-18)
    [2013-06-05 13:09] [PACMAN] upgraded virtuoso-base (6.1.6-1 -> 6.1.6-2)
    [2013-06-05 13:09] [PACMAN] upgraded soprano (2.9.0-2 -> 2.9.2-1)
    [2013-06-05 13:09] [PACMAN] upgraded openexr (1.7.1-2 -> 2.0.0-1)
    [2013-06-05 13:09] [PACMAN] upgraded procps-ng (3.3.7-1 -> 3.3.8-1)
    [2013-06-05 13:09] [PACMAN] upgraded pm-utils (1.4.1-5 -> 1.4.1-6)
    [2013-06-05 13:09] [PACMAN] upgraded libplist (1.8-2 -> 1.10-1)
    [2013-06-05 13:09] [PACMAN] upgraded usbmuxd (1.0.8-1 -> 1.0.8-2)
    [2013-06-05 13:09] [PACMAN] upgraded libimobiledevice (1.1.4-2 -> 1.1.5-1)
    [2013-06-05 13:09] [PACMAN] upgraded upower (0.9.20-1 -> 0.9.20-2)
    [2013-06-05 13:09] [PACMAN] upgraded qtwebkit (2.3.0-1 -> 2.3.1-2)
    [2013-06-05 13:09] [PACMAN] upgraded kdelibs (4.10.1-2 -> 4.10.3-3)
    [2013-06-05 13:09] [ALPM-SCRIPTLET] gtk-update-icon-cache: Cache file created successfully.
    [2013-06-05 13:09] [PACMAN] upgraded klavaro (1.9.6-1 -> 1.9.7-1)
    [2013-06-05 13:09] [PACMAN] upgraded laptop-mode-tools (1.63-1 -> 1.63-2)
    [2013-06-05 13:09] [PACMAN] upgraded less (451-1 -> 458-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-alsa-lib (1.0.26-1 -> 1.0.27.1-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-dbus-core (1.6.8-1 -> 1.6.10-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-fontconfig (2.10.2-1 -> 2.10.93-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-zlib (1.2.7-1 -> 1.2.8-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-glib2 (2.34.3-1 -> 2.36.2-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-glu (9.0.0-1 -> 9.0.0-2)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libjpeg-turbo (1.2.1-1 -> 1.3.0-2)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libpng (1.5.14-1 -> 1.6.2-1)
    [2013-06-05 13:09] [PACMAN] installed lib32-xz (5.0.4-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libtiff (4.0.3-1 -> 4.0.3-2)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxau (1.0.7-1 -> 1.0.8-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxcb (1.9-2 -> 1.9.1-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxfixes (5.0-1 -> 5.0.1-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxcursor (1.1.13-1 -> 1.1.14-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxext (1.3.1-1 -> 1.3.2-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxi (1.7-1 -> 1.7.1-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxrandr (1.4.0-1 -> 1.4.1-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxv (1.0.7-1 -> 1.0.8-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-sqlite (3.7.16-1 -> 3.7.17-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-qt4 (4.8.4-4 -> 4.8.4-5)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-util-linux (2.22.2-1 -> 2.23.1-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-v4l-utils (0.9.3-1 -> 0.9.5-1)
    [2013-06-05 13:09] [PACMAN] upgraded libbonobo (2.32.1-3 -> 2.32.1-4)
    [2013-06-05 13:09] [PACMAN] upgraded libburn (1.2.8-1 -> 1.3.0.pl01-1)
    [2013-06-05 13:09] [PACMAN] upgraded libdmx (1.1.2-1 -> 1.1.3-1)
    [2013-06-05 13:09] [PACMAN] upgraded libdvbpsi (0.2.2-1 -> 1:0.2.2-1)
    [2013-06-05 13:09] [PACMAN] upgraded libfontenc (1.1.1-1 -> 1.1.2-1)
    [2013-06-05 13:09] [PACMAN] upgraded libgnome-keyring (3.6.0-2 -> 3.8.0-1)
    [2013-06-05 13:09] [PACMAN] upgraded libgpod (0.8.2-6 -> 0.8.2-7)
    [2013-06-05 13:09] [PACMAN] upgraded libgxps (0.2.2-2 -> 0.2.2-3)
    [2013-06-05 13:09] [PACMAN] upgraded libical (0.48-1 -> 1.0-2)
    [2013-06-05 13:09] [PACMAN] upgraded libisofs (1.2.8-1 -> 1.3.0-1)
    [2013-06-05 13:09] [PACMAN] upgraded libkate (0.4.1-3 -> 0.4.1-4)
    [2013-06-05 13:09] [PACMAN] upgraded liblastfm (1.0.6-2 -> 1.0.7-1)
    [2013-06-05 13:09] [PACMAN] upgraded libmicrohttpd (0.9.25-1 -> 0.9.27-1)
    [2013-06-05 13:09] [PACMAN] upgraded libnfs (1.3.0-1 -> 1.5.0-1)
    [2013-06-05 13:09] [PACMAN] upgraded libpcap (1.3.0-3 -> 1.4.0-1)
    [2013-06-05 13:09] [PACMAN] upgraded libpipeline (1.2.2-1 -> 1.2.3-1)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-hu (4.0.1-1 -> 4.0.3-1)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-common (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-base (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-calc (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-draw (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-gnome (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-impress (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-kde4 (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-math (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded postgresql-libs (9.2.3-1 -> 9.2.4-2)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-postgresql-connector (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-sdk (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:10] [PACMAN] upgraded libreoffice-sdk-doc (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:10] [PACMAN] upgraded libwpd (0.9.4-1 -> 0.9.6-1)
    [2013-06-05 13:10] [PACMAN] upgraded libwps (0.2.7-1 -> 0.2.9-1)
    [2013-06-05 13:10] [PACMAN] upgraded libreoffice-writer (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:10] [PACMAN] upgraded libshairport (1.2.1-2 -> 1.2.1.20121215-1)
    [2013-06-05 13:10] [PACMAN] upgraded tar (1.26-2 -> 1.26-4)
    [2013-06-05 13:10] [PACMAN] upgraded libtool (2.4.2-7 -> 2.4.2-9)
    [2013-06-05 13:10] [PACMAN] upgraded libtorrent-rasterbar (1:0.16.9-1 -> 1:0.16.10-1)
    [2013-06-05 13:10] [PACMAN] upgraded libxres (1.0.6-1 -> 1.0.7-1)
    [2013-06-05 13:10] [PACMAN] upgraded linux-firmware (20121118-1 -> 20130528-1)
    [2013-06-05 13:10] [PACMAN] upgraded mkinitcpio (0.13.0-1 -> 0.14.0-1)
    [2013-06-05 13:10] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-06-05 13:10] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Starting build: 3.9.4-1-ARCH
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [v86d]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: Hook 'plymouth' cannot be found
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: Hook 'plymouth-encrypt' cannot be found
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: file not found: `/usr/sbin/dmsetup'
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [resume]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> WARNING: errors were encountered during the build. The image may not be complete.
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Starting build: 3.9.4-1-ARCH
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [v86d]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: Hook 'plymouth' cannot be found
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: Hook 'plymouth-encrypt' cannot be found
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: file not found: `/usr/sbin/dmsetup'
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [resume]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> WARNING: errors were encountered during the build. The image may not be complete.
    [2013-06-05 13:10] [PACMAN] upgraded linux (3.8.4-1 -> 3.9.4-1)
    [2013-06-05 13:10] [PACMAN] upgraded linux-headers (3.8.4-1 -> 3.9.4-1)
    [2013-06-05 13:10] [PACMAN] upgraded linux-lts-headers (3.0.71-1 -> 3.0.80-1)
    [2013-06-05 13:10] [PACMAN] upgraded lm_sensors (3.3.3-1 -> 3.3.4-1)
    [2013-06-05 13:10] [PACMAN] upgraded logrotate (3.8.3-1 -> 3.8.4-2)
    [2013-06-05 13:10] [PACMAN] upgraded lsof (4.87-1 -> 4.87-2)
    [2013-06-05 13:10] [PACMAN] upgraded lvm2 (2.02.98-3 -> 2.02.98-4)
    [2013-06-05 13:10] [PACMAN] upgraded man-db (2.6.3-1 -> 2.6.3-3)
    [2013-06-05 13:11] [PACMAN] upgraded man-pages (3.50-1 -> 3.51-1)
    [2013-06-05 13:11] [PACMAN] upgraded mdadm (3.2.6-3 -> 3.2.6-4)
    [2013-06-05 13:11] [PACMAN] upgraded meld (1.7.1-1 -> 1.7.3-1)
    [2013-06-05 13:11] [PACMAN] upgraded mercurial (2.5.2-1 -> 2.6.2-1)
    [2013-06-05 13:11] [PACMAN] upgraded zenity (3.6.0-1 -> 3.8.0-1)
    [2013-06-05 13:11] [PACMAN] upgraded metacity (2.34.13-1 -> 2.34.13-5)
    [2013-06-05 13:11] [PACMAN] upgraded mjpegtools (2.0.0-2 -> 2.0.0-3)
    [2013-06-05 13:11] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2013-06-05 13:11] [PACMAN] upgraded pacman-mirrorlist (20130323-1 -> 20130601-1)
    [2013-06-05 13:11] [PACMAN] upgraded pacman (4.1.0-2 -> 4.1.1-1)
    [2013-06-05 13:11] [PACMAN] upgraded pyalpm (0.5.3-2 -> 0.6.1-1)
    [2013-06-05 13:11] [PACMAN] upgraded namcap (3.2.4-2 -> 3.2.5-1)
    [2013-06-05 13:11] [PACMAN] upgraded net-tools (1.60.20120804git-2 -> 1.60.20130531git-1)
    [2013-06-05 13:11] [PACMAN] upgraded xinetd (2.3.15-2 -> 2.3.15-3)
    [2013-06-05 13:11] [PACMAN] upgraded netkit-bsd-finger (0.17-7 -> 0.17-8)
    [2013-06-05 13:11] [PACMAN] upgraded wpa_supplicant (2.0-3 -> 2.0-4)
    [2013-06-05 13:11] [PACMAN] upgraded ppp (2.4.5-5 -> 2.4.5-6)
    [2013-06-05 13:11] [PACMAN] installed libqmi (1.2.0-2)
    [2013-06-05 13:11] [PACMAN] installed libmbim (1.0.0-1)
    [2013-06-05 13:11] [PACMAN] installed modemmanager (0.7.990-5)
    [2013-06-05 13:11] [PACMAN] upgraded networkmanager (0.9.8.0-2 -> 0.9.8.0-4)
    [2013-06-05 13:11] [PACMAN] upgraded network-manager-applet (0.9.8.0-1 -> 0.9.8.0-3)
    [2013-06-05 13:11] [PACMAN] upgraded python2-distribute (0.6.34-1 -> 0.6.40-1)
    [2013-06-05 13:11] [PACMAN] upgraded sip (4.14.5-1 -> 4.14.6-1)
    [2013-06-05 13:11] [PACMAN] upgraded python2-sip (4.14.5-1 -> 4.14.6-1)
    [2013-06-05 13:11] [PACMAN] upgraded pyqt-common (4.10-1 -> 4.10.1-1)
    [2013-06-05 13:11] [PACMAN] upgraded python2-pyqt (4.10-1 -> 4.10.1-1)
    [2013-06-05 13:11] [PACMAN] upgraded ninja-ide (2.1.1-1 -> 2.2-1)
    [2013-06-05 13:11] [PACMAN] upgraded ntfs-3g (2013.1.13-2 -> 2013.1.13-3)
    [2013-06-05 13:11] [PACMAN] upgraded ntp (4.2.6.p5-13 -> 4.2.6.p5-14)
    [2013-06-05 13:11] [ALPM-SCRIPTLET]
    [2013-06-05 13:11] [ALPM-SCRIPTLET] ==> The sshd daemon has been moved to /usr/bin alongside all binaries.
    [2013-06-05 13:11] [ALPM-SCRIPTLET] ==> Please update this path in your scripts if applicable.
    [2013-06-05 13:11] [ALPM-SCRIPTLET]
    [2013-06-05 13:11] [PACMAN] upgraded openssh (6.2p1-1 -> 6.2p2-1)
    [2013-06-05 13:11] [PACMAN] upgraded opera (12.14.1738-1 -> 12.15.1748-1)
    [2013-06-05 13:11] [PACMAN] upgraded xfce4-panel (4.10.0-1 -> 4.10.1-1)
    [2013-06-05 13:11] [PACMAN] upgraded orage (4.8.4-1 -> 4.8.4-2)
    [2013-06-05 13:11] [PACMAN] upgraded pcmciautils (018-6 -> 018-7)
    [2013-06-05 13:11] [PACMAN] upgraded perl-bit-vector (7.2-2 -> 7.2-3)
    [2013-06-05 13:11] [PACMAN] upgraded perl-digest-sha1 (2.13-3 -> 2.13-4)
    [2013-06-05 13:11] [PACMAN] upgraded perl-gd (2.49-1 -> 2.49-2)
    [2013-06-05 13:11] [PACMAN] upgraded perl-html-parser (3.69-2 -> 3.71-2)
    [2013-06-05 13:11] [PACMAN] upgraded perl-image-exiftool (9.13-1 -> 9.27-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-net-ssleay (1.52-1 -> 1.54-2)
    [2013-06-05 13:11] [PACMAN] upgraded perl-io-socket-ssl (1.81-1 -> 1.94-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-json (2.53-2 -> 2.58-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-json-xs (2.33-1 -> 2.33-2)
    [2013-06-05 13:11] [PACMAN] upgraded perl-libwww (6.04-1 -> 6.05-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-locale-gettext (1.05-9 -> 1.05-10)
    [2013-06-05 13:11] [PACMAN] upgraded perl-lwp-protocol-https (6.03-1 -> 6.04-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-net-dbus (1.0.0-2 -> 1.0.0-3)
    [2013-06-05 13:11] [PACMAN] upgraded perl-test-pod (1.46-1 -> 1.48-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-text-iconv (1.7-7 -> 1.7-8)
    [2013-06-05 13:11] [PACMAN] upgraded perl-tree-dag-node (1.07-1 -> 1.11-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-xml-parser (2.41-3 -> 2.41-4)
    [2013-06-05 13:11] [PACMAN] upgraded perl-yaml-syck (1.22-1 -> 1.27-1)
    [2013-06-05 13:11] [PACMAN] upgraded poppler-glib (0.22.2-1 -> 0.22.4-1)
    [2013-06-05 13:11] [PACMAN] upgraded poppler-qt (0.22.2-1 -> 0.22.4-1)
    [2013-06-05 13:11] [PACMAN] upgraded pptpclient (1.7.2-4 -> 1.7.2-5)
    [2013-06-05 13:11] [PACMAN] upgraded protobuf (2.5.0-1 -> 2.5.0-3)
    [2013-06-05 13:11] [PACMAN] upgraded rtkit (0.11-1 -> 0.11-2)
    [2013-06-05 13:11] [PACMAN] upgraded sbc (1.0-1 -> 1.1-1)
    [2013-06-05 13:11] [ALPM-SCRIPTLET] >>> If you have per-user copies of configuration files (such as client.conf,
    [2013-06-05 13:11] [ALPM-SCRIPTLET] daemon.conf or default.pa) in ~/.pulse/, make sure you keep them in sync
    [2013-06-05 13:11] [ALPM-SCRIPTLET] with changes to the packaged files in /etc/pulse/. Otherwise, PulseAudio
    [2013-06-05 13:11] [ALPM-SCRIPTLET] may refuse to start due to configuration errors.
    [2013-06-05 13:11] [ALPM-SCRIPTLET]
    [2013-06-05 13:11] [ALPM-SCRIPTLET] >>> Autospawn is now disabled by default. If you need to run PulseAudio outside
    [2013-06-05 13:11] [ALPM-SCRIPTLET] of an X session, either:
    [2013-06-05 13:11] [ALPM-SCRIPTLET] - Enable autospawn in client.conf, or
    [2013-06-05 13:11] [ALPM-SCRIPTLET] - Start it manually by executing 'pulseaudio --start'
    [2013-06-05 13:11] [PACMAN] upgraded pulseaudio (3.0-2 -> 3.0-3)
    [2013-06-05 13:11] [PACMAN] upgraded python2-zope-interface (4.0.3-1 -> 4.0.5-1)
    [2013-06-05 13:11] [PACMAN] upgraded reiserfsprogs (3.6.22-1 -> 3.6.22-2)
    [2013-06-05 13:11] [PACMAN] upgraded rfkill (0.4-7 -> 0.5-1)
    [2013-06-05 13:11] [PACMAN] upgraded rsync (3.0.9-5 -> 3.0.9-6)
    [2013-06-05 13:11] [PACMAN] upgraded rxvt-unicode (9.18-1 -> 9.18-5)
    [2013-06-05 13:11] [PACMAN] upgraded sdl_image (1.2.12-2 -> 1.2.12-3)
    [2013-06-05 13:11] [PACMAN] upgraded seahorse (3.6.3-1 -> 3.8.2-1)
    [2013-06-05 13:11] [PACMAN] upgraded skype (4.1.0.20-6 -> 4.2.0.11-1)
    [2013-06-05 13:11] [PACMAN] upgraded slim (1.3.5-2 -> 1.3.5-3)
    [2013-06-05 13:11] [PACMAN] upgraded subversion (1.7.8-1 -> 1.7.9-6)
    [2013-06-05 13:11] [PACMAN] upgraded sudo (1.8.6.p7-2 -> 1.8.6.p8-2)
    [2013-06-05 13:11] [PACMAN] upgraded sysvinit-tools (2.88-9 -> 2.88-11)
    [2013-06-05 13:11] [PACMAN] upgraded systemd-sysvcompat (198-2 -> 204-3)
    [2013-06-05 13:11] [PACMAN] upgraded terminator (0.96-4 -> 0.97-1)
    [2013-06-05 13:11] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:12] [ALPM-SCRIPTLET] recreating all formats... done.
    [2013-06-05 13:12] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
    [2013-06-05 13:12] [PACMAN] upgraded texlive-bin (2012.0-8 -> 2012.0-12)
    [2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.BkYRWYLQwd...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
    [2013-06-05 13:13] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
    [2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] done.
    [2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: recreating all formats...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] done.
    [2013-06-05 13:13] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
    [2013-06-05 13:13] [ALPM-SCRIPTLET] NB: To setup ConTeXt and the lua(la)tex font db,
    [2013-06-05 13:13] [ALPM-SCRIPTLET] see http://wiki.archlinux.org/index.php/TeX_Live
    [2013-06-05 13:13] [PACMAN] upgraded texlive-core (2012.28273-1 -> 2012.29661-1)
    [2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:13] [PACMAN] upgraded texlive-bibtexextra (2012.28244-1 -> 2012.29663-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.PCRnjpu2LX...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
    [2013-06-05 13:14] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-fontsextra (2012.28268-1 -> 2012.29646-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-formatsextra (2012.26689-1 -> 2012.29110-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.wUzwlpN7S4...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
    [2013-06-05 13:14] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-games (2012.28243-1 -> 2012.29679-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-genericextra (2012.28210-1 -> 2012.29501-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-htmlxml (2012.28273-1 -> 2012.29474-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.OUUwjPH5PT...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
    [2013-06-05 13:14] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-latexextra (2012.28272-1 -> 2012.29701-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-humanities (2012.28280-1 -> 2012.29347-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: saving u

    It has solved itself today. After making a -Syu today and installing a newer kernel then reinstalling catalyst-dkms from AUR it is working again!! )))) Marking as solved.
    Kernel: 3.9.5-1-ARCH
    Catalyst-dkms: 13.1-2 (instead of newest 13.4-1)
    Last edited by szebenyib (2013-06-14 12:02:42)

  • [S]Systemd can't start Load Kernel Modules after upgrade to Linux 4.0

    After upgrading from linux 3.19.3-3 to 4.0.1-1 I've been having a bit of an issue. At that same time I upgraded readline (6.3.006-1 → 6.3.008-1), linux-firmware (20150206.17657c3-1 → 20150410.ec89525-1), nvidia (349.16-1 → 349.16-2) , wpa_suplican (2.4-1 → 1:2.3-1), and  arpack (3.1.5-1 → 3.2.0-1). There may be some typos there since I'm copying by hand. Normally this wouldn't be much of a problem because I have been, priory to a few weeks ago, really good about back ups and would just roll my OS back 15 minutes. But things like that tend to fly out the window when the semester gets heavy. My last snapshot was on May 22nd, which I could still use, but would rather not. Also, it seems like a good idea to try to actual fix things for a change.
    [edit] I should mention that this upgrade was run April 30th.[/edit]
    When I finished booting the system after the upgrade, I got an error message during boot “systemd[1]: Failed to start Load Kernel Modules.” When it finished booting I run “dmesg -l err” to confirm that I'm not having a bad day dream or something. I'm also still seeing the errors that I described in this thread. Don't know if the two are related. I also noticed, when I was logging in, that it said that my stystem was still using the old kernel. Indeed, according to “uname -r” I'm still using 3.19.3-3-ARCH.
    The closest thing to experience I have with this is when I forget to mount /boot before upgrading linux, so I made sure /boot was mounted and rand “sudo pacman -S linux” to reinstall, but this didn't help. Just to check I ran “ls /lib/modules” and see the directorys “4.0.1-1-ARCH” and “extramodules-4.0-ARCH” as I would expect after a succesful upgrade of the kernel.
    Running “systemctl –failed, shows that in addition to systemd-modules-load.service, lm_sensors.service has also failed. I somehow expect lm_sensors depends on systemd-modules-load. I tried “systemctl restart systemd-modules-load”, but was rewarded with a message telling me that it failed. The “journalctl -xe” log has the lines
    systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
    systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
    Looking at the Wiki for Systemd under troubleshooting it actually has an example of trying to work through this exact issue. Following that I tried
    journalctl _PID=1799
    systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
    systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
    which I already mentioned. At this point that bit of the Wiki stopped being useful.
    Looking up on Google Failed to look up alias 'nfs': Function not implemented returned this thread from two years ago. Running “lsmod |grep sg” or $lsmod |grep nfs” returns nothing, but it also returns nothing on this laptop I'm using as well, so I don't imagine that is useful. Also, “# grep nfs /lib/modules/4.0.1-1-ARCH/modules.alias” returns a “Nosuch file or directory” error.
    Searching for something on 'sg' turned up https://bbs.archlinux.org/viewtopic.php?id=165361, which was also not useful.
    As a sort of last resort I tried https://wiki.archlinux.org/index.php/Do … the_kernel
    I reboot and boot into my fallback installation, running 3.19.3-3, mount the partition with my main Arch on it, and arch-chroot into it.
    I downgraded linux, and nvidia, exited chroot, and rebooted hoping to the Great Bacon that I didn't do anything too damaging. After all, my back ups are more than a week out of date.
    This worked. I'm still getting those annyoing (they are only annoying right?) error messages I mentioned earlier. My system seems fine, if somewhat out of date.
    Still, the question remains, “why did that happen, and how do I actually fix it?”
    [edit2=solution]
    There were two problems. First, my grub.cfg entry was pointing to the wrong UUID. I fixed this by regenerating it. Then I noticed the UUID in the grub menu itself (during the boot prosses) did not match what was in grub.cfg. To fix this I reinstalled grub.
    Last edited by nstgc (2015-05-05 12:07:30)

    Well, I took snapshots, not back ups but they work well enough for this, and rsynced /boot/ to where it use to be, moved/renamed the subvolume boot, and commented out the appropriate line in fstab. I also deleted that other /boot from before. I unmount /boot, and regenerate my grub.cfg. If my machine still boots, I'll try for an upgrade.
    grub.cfg now looks like
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    if [ "${next_entry}" ] ; then
    set default="${next_entry}"
    set next_entry=
    save_env next_entry
    set boot_once=true
    else
    set default="0"
    fi
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_msdos
    insmod part_msdos
    insmod part_msdos
    insmod btrfs
    set root='hd4,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
    else
    search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
    fi
    font="/arch/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=en_US
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=5
    # Fallback normal timeout code in case the timeout_style feature is
    # unavailable.
    else
    set timeout=5
    fi
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod part_msdos
    insmod part_msdos
    insmod btrfs
    set root='hd4,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
    else
    search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
    fi
    echo 'Loading Linux linux ...'
    linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
    echo 'Loading initial ramdisk ...'
    initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
    submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
    menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod part_msdos
    insmod part_msdos
    insmod btrfs
    set root='hd4,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
    else
    search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
    fi
    echo 'Loading Linux linux ...'
    linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
    echo 'Loading initial ramdisk ...'
    initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
    menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod part_msdos
    insmod part_msdos
    insmod btrfs
    set root='hd4,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
    else
    search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
    fi
    echo 'Loading Linux linux ...'
    linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
    echo 'Loading initial ramdisk ...'
    initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    menuentry 'Windows Vista (loader) (on /dev/sdd2)' --class windows --class os $menuentry_id_option 'osprober-chain-30F403F0F403B75E' {
    insmod part_gpt
    insmod ntfs
    set root='hd3,gpt2'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt2 --hint-efi=hd3,gpt2 --hint-baremetal=ahci3,gpt2 30F403F0F403B75E
    else
    search --no-floppy --fs-uuid --set=root 30F403F0F403B75E
    fi
    chainloader +1
    menuentry 'Windows Vista (loader) (on /dev/sdd4)' --class windows --class os $menuentry_id_option 'osprober-chain-FE2648382647EFE7' {
    insmod part_gpt
    insmod ntfs
    set root='hd3,gpt4'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt4 --hint-efi=hd3,gpt4 --hint-baremetal=ahci3,gpt4 FE2648382647EFE7
    else
    search --no-floppy --fs-uuid --set=root FE2648382647EFE7
    fi
    chainloader +1
    menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
    insmod part_gpt
    insmod ext2
    set root='hd3,gpt5'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
    else
    search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
    fi
    linux /boot/vmlinuz-linux root=/dev/sdd5
    initrd /boot/initramfs-linux.img
    submenu 'Advanced options for Arch (on /dev/sdd5)' $menuentry_id_option 'osprober-gnulinux-advanced-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
    menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-linux--832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
    insmod part_gpt
    insmod ext2
    set root='hd3,gpt5'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
    else
    search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
    fi
    linux /boot/vmlinuz-linux root=/dev/sdd5
    initrd /boot/initramfs-linux.img
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    ### BEGIN /etc/grub.d/60_memtest86+ ###
    if [ "${grub_platform}" == "pc" ]; then
    menuentry "Memory Tester (memtest86+)" --class memtest86 --class gnu --class tool {
    search --fs-uuid --no-floppy --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
    linux16 /arch/boot/memtest86+/memtest.bin
    fi
    ### END /etc/grub.d/60_memtest86+ ###
    It seems as if the lines you mentioned, Scimmia, have changed. I'll take that as a good sign.
    [edit] System still boots. Trying for the upgrade.
    [edit2] Still can't use Linux 4.0. I'm getting the same errors as before.
    [edit3] Successfully downgraded.
    [edit4] I looked through /etc/mkinitcpio.conf and there isn't anything in there that isn't in my laptop's. I don't know if this will help, but here is the output of "pacman -Q"
    a52dec 0.7.4-8
    aalib 1.4rc5-10
    abs 2.4.4-2
    accountsservice 0.6.40-1
    acl 2.2.52-2
    adobe-source-han-sans-jp-fonts 1.002-1
    adwaita-icon-theme 3.16.0-1
    alsa-lib 1.0.29-1
    alsa-plugins 1.0.29-2
    alsa-utils 1.0.29-1
    alsi 0.4.7-1
    arch-install-scripts 15-1
    arch-wiki-docs 20150219-1
    arch-wiki-lite 20150219-2
    archlinux-keyring 20150212-1
    arpack 3.2.0-1
    aspell 0.60.6.1-2
    asunder 2.7-1
    at-spi2-atk 2.16.0-1
    at-spi2-core 2.16.0-1
    atk 2.16.0-1
    atkmm 2.22.7-1
    attr 2.4.47-1
    autoconf 2.69-2
    automake 1.15-1
    avahi 0.6.31-15
    awesome 3.5.6-1
    bash 4.3.033-1
    bash-completion 2.1-5
    bc 1.06.95-1
    bcache-tools 1.0.8-1
    bigpkg 0.4.0-2
    binutils 2.25-2
    bison 3.0.4-1
    blas 3.5.0-1
    bluez 5.30-1
    bluez-libs 5.30-1
    bonnie++ 1.97-1
    boost 1.58.0-1
    boost-libs 1.58.0-1
    btrfs-progs 3.19.1-1
    bullet 2.82-1
    bzip2 1.0.6-5
    ca-certificates 20150402-1
    ca-certificates-cacert 20140824-2
    ca-certificates-mozilla 3.18-3
    ca-certificates-utils 20150402-1
    cabextract 1.4-3
    cairo 1.14.2-1
    cairo-clock 0.3.4-4
    cairo-dock 3.4.1-1
    cairo-dock-plug-ins 3.4.1-1
    cairomm 1.10.0-3
    calibre 2.27.0-1
    cantarell-fonts 0.0.16-2
    caribou 0.4.18.1-1
    cddb-py 1.4-7
    cdparanoia 10.2-5
    cdrdao 1.2.3-7
    cdrtools 3.01a28-1
    celt 0.11.3-2
    cfv 1.18.3-6
    cheese 3.16.1-1
    chmlib 0.40-4
    chromaprint 1.1-2
    chromium 42.0.2311.135-1
    chromium-pepper-flash 1:17.0.0.169-3
    cifs-utils 6.4-1
    cinnamon-desktop 2.4.2-1
    cinnamon-translations 2.4.4-1
    clementine 1.2.3-5
    clucene 2.3.3.4-8
    clutter 1.22.0-2
    clutter-gst2 2.0.14-1
    clutter-gtk 1.6.0-2
    cmus 2.6.0-4
    cogl 1.20.0-1
    colord 1.2.9-2
    colord-gtk 0.1.26-2
    compositeproto 0.4.2-3
    confuse 2.7-3
    coreutils 8.23-1
    cracklib 2.9.4-1
    cryptsetup 1.6.6-1
    cups 2.0.2-4
    cups-filters 1.0.68-1
    cups-pk-helper 0.2.5-1
    curl 7.42.0-1
    damageproto 1.2.1-3
    db 5.3.28-2
    dbus 1.8.16-2
    dbus-glib 0.102-2
    dconf 0.24.0-1
    desktop-file-utils 0.22-1
    device-mapper 2.02.116-1
    dhclient 4.3.2-1
    dhcpcd 6.8.1-1
    dia 0.97.3-1
    dialog 1:1.2_20150225-1
    dictd 1.12.1-4
    diffutils 3.3-2
    ding-libs 0.4.0-3
    djvulibre 3.5.27-1
    dnssec-anchors 20150403-1
    dotconf 1.3-4
    dri2proto 2.8-2
    dri3proto 1.0-1
    dvd+rw-tools 7.1-5
    dvdisaster 0.72.6-1
    e2fsprogs 1.42.12-2
    ecryptfs-utils 106-1
    ed 1.11-1
    efl 1.13.2-1
    elementary 1.13.2-1
    elfutils 0.161-3
    enca 1.16-1
    enchant 1.6.0-5
    enlightenment 0.19.4-1
    evas_generic_loaders 1.13.2-1
    evince 3.16.0-1
    exempi 2.2.2-1
    exfat-utils 1.1.1-1
    exif-py 1.2.0-1
    exiv2 0.24-1
    expac 4-3
    expat 2.1.0-4
    extcalc 0.9.3_1-3
    faac 1.28-5
    faad2 2.7-4
    fakeroot 1.20.2-1
    fbreader 0.99.4-4
    ffmpeg 1:2.6.2-1
    fftw 3.3.4-1
    file 5.22-1
    file-roller 3.16.1-1
    filesystem 2015.02-1
    findutils 4.4.2-6
    firefox 37.0.2-1
    fixesproto 5.0-3
    flac 1.3.1-1
    flashplugin 11.2.202.457-1
    flex 2.5.39-1
    fltk 1.3.3-4
    fluidsynth 1.1.6-4
    fontconfig 2.11.1-1
    fontsproto 2.1.3-1
    foomatic-db 3:20150308-1
    foomatic-db-engine 3:20150308-1
    freetype2 2.5.5-1
    fribidi 0.19.6-2
    fsarchiver 0.6.19-1
    fuse 2.9.3-2
    fuse-exfat 1.1.0-1
    gawk 4.1.2-1
    gc 7.4.2-2
    gcc-fortran 4.9.2-4
    gcc-libs-multilib 4.9.2-4
    gcc-multilib 4.9.2-4
    gconf 3.2.6-3
    gcr 3.15.92-1
    gd 2.1.1-2
    gdb 7.9-1
    gdbm 1.11-1
    gdk-pixbuf2 2.31.3-1
    geany 1.24.1-1
    gemrb 0.8.2-1
    geoclue 0.12.99-2
    geoclue2 2.2.0-2
    geocode-glib 3.16.0-1
    gettext 0.19.4-1
    ghostscript 9.16-1
    giflib 5.1.1-1
    git 2.3.7-1
    gjs 1.43.3-1
    glew 1.12.0-1
    glib-networking 2.44.0-2
    glib2 2.44.0-1
    glibc 2.21-3
    glibmm 2.44.0-1
    glproto 1.4.17-1
    glu 9.0.0-3
    gmime 2.6.20-2
    gmp 6.0.0-2
    gnome-bluetooth 3.16.1-1
    gnome-color-manager 3.16.0-1
    gnome-control-center 3.16.1-2
    gnome-desktop 1:3.16.1-1
    gnome-dictionary 3.16.1-1
    gnome-disk-utility 3.16.0-1
    gnome-menus 3.13.3-1
    gnome-online-accounts 3.16.0-2
    gnome-session 3.16.0-1
    gnome-settings-daemon 3.16.1-1
    gnome-shell 3.16.1-2
    gnome-shell-extensions 3.16.1-1
    gnome-system-monitor 3.16.0-1
    gnome-themes-standard 3.16.0-1
    gnome-tweak-tool 3.16.1-1
    gnome-video-effects 0.4.1-1
    gnupg 2.1.3-3
    gnuplot 5.0.0-2
    gnutls 3.4.0-1
    gobject-introspection 1.44.0-1
    gobject-introspection-runtime 1.44.0-1
    google-chrome 42.0.2311.135-1
    gparted 0.22.0-1
    gpgme 1.5.4-1
    gpm 1.20.7-4
    graphite 1:1.2.4-1
    grep 2.21-2
    grilo 0.2.12-1
    groff 1.22.3-3
    grsync 1.2.5-1
    grub 1:2.02.beta2-5
    gsettings-desktop-schemas 3.16.1-1
    gsfonts 20150122-1
    gsm 1.0.13-8
    gssproxy 0.4.1-1
    gst-libav 1.4.5-1
    gst-plugins-bad 1.4.5-2
    gst-plugins-base 1.4.5-1
    gst-plugins-base-libs 1.4.5-1
    gst-plugins-good 1.4.5-2
    gst-plugins-ugly 1.4.5-2
    gstreamer 1.4.5-1
    gstreamer0.10 0.10.36-4
    gstreamer0.10-base 0.10.36-3
    gstreamer0.10-base-plugins 0.10.36-3
    gstreamer0.10-good 0.10.31-6
    gstreamer0.10-good-plugins 0.10.31-6
    gstreamer0.10-python 0.10.22-2
    gstreamer0.10-ugly 0.10.19-14
    gstreamer0.10-ugly-plugins 0.10.19-14
    gthumb 3.4.0-1
    gtk-update-icon-cache 2.24.27-1
    gtk2 2.24.27-1
    gtk3 3.16.2-1
    gtkmm 2.24.4-1
    gtkmm3 3.16.0-1
    guile 2.0.11-2
    gvfs 1.24.1-1
    gvfs-mtp 1.24.1-1
    gzip 1.6-1
    hal-info 0.20091130-2
    harfbuzz 0.9.40-2
    harfbuzz-icu 0.9.40-2
    haveged 1.9.1-2
    hdparm 9.45-1
    hdsentinel 0.8-2
    help2man 1.46.4-1
    hicolor-icon-theme 0.13-1
    hplip 3.15.4-1
    hspell 1.2-2
    htmlcxx 0.85-4
    htop 1.0.3-2
    hunspell 1.3.3-1
    hwids 20150129-1
    hwinfo 21.10.1.1-1
    hwloc 1.10.1-1
    hyphen 2.8.8-1
    i3-wm 4.10.2-1
    i3lock 2.6-1
    i3status 2.9-1
    i7z 0.27.2.git1-1
    iana-etc 2.30-4
    icedtea-web 1.5.2-1
    icu 55.1-1
    imagemagick 6.9.1.0-1
    imagewriter 1.10.1420800585.134a9b3-1
    imlib2 1.4.7-1
    inetutils 1.9.2-2
    innoextract 1.4-0
    inputproto 2.3.1-1
    intel-tbb 4.3_20150209-1
    intel-ucode 20150121-1
    inxi 2.2.19-1
    iproute2 3.19.0-1
    iptables 1.4.21-3
    iputils 20121221-3
    ipython 3.1.0-1
    iso-codes 3.57-1
    jack 0.124.1-3
    jansson 2.7-1
    jasper 1.900.1-13
    java-environment-common 2-2
    java-runtime-common 2-2
    jdk7-openjdk 7.u79_2.5.5-1
    jfsutils 1.1.15-4
    jmtpfs 0.5-1
    jre7-openjdk 7.u79_2.5.5-1
    jre7-openjdk-headless 7.u79_2.5.5-1
    js 24.2.0-1
    js17 17.0.0-1
    json-c 0.12-2
    json-glib 1.0.2-1
    jsoncpp 1.4.4-1
    julia 2:0.3.7-1
    julia-docs 2:0.3.7-1
    kbd 2.0.2-1
    kbproto 1.0.7-1
    keyutils 1.5.9-1
    kmod 20-1
    krb5 1.13.1-1
    kvirc 4.2.0-4
    lame 3.99.5-2
    lapack 3.5.0-1
    lcms 1.19-5
    lcms2 2.6-1
    ldb 1.1.20-1
    ldns 1.6.17-2
    less 471-1
    lgogdownloader-git 20150310-1
    lib32-acl 2.2.52-2
    lib32-alsa-lib 1.0.29-1
    lib32-alsa-plugins 1.0.29-2
    lib32-atk 2.16.0-1
    lib32-attr 2.4.47-1
    lib32-bzip2 1.0.6-2
    lib32-cairo 1.14.2-1
    lib32-curl 7.41.0-1
    lib32-db 5.3.28-2
    lib32-e2fsprogs 1.42.12-1
    lib32-elfutils 0.161-2
    lib32-expat 2.1.0-2
    lib32-fakeroot 1.20.2-1
    lib32-flac 1.3.1-1
    lib32-flashplugin 11.2.202.457-1
    lib32-fontconfig 2.11.1-1
    lib32-freetype2 2.5.5-1
    lib32-gcc-libs 4.9.2-4
    lib32-gdk-pixbuf2 2.31.3-2
    lib32-gettext 0.19.4-1
    lib32-giflib 5.1.1-1
    lib32-glew 1.12.0-1
    lib32-glib2 2.44.0-1
    lib32-glibc 2.21-2
    lib32-glu 9.0.0-2
    lib32-gmp 6.0.0-1
    lib32-gnutls 3.4.0-2
    lib32-gsm 1.0.13-9
    lib32-gtk2 2.24.27-1
    lib32-harfbuzz 0.9.40-2
    lib32-icu 55.1-1
    lib32-jack 0.124.1-1
    lib32-json-c 0.12-1
    lib32-keyutils 1.5.9-1
    lib32-krb5 1.13.1-1
    lib32-lcms2 2.6-1
    lib32-libaio 0.3.110-1
    lib32-libasyncns 0.8-7
    lib32-libcanberra 0.30-4
    lib32-libcap 2.24-1
    lib32-libcl 1.1-1
    lib32-libcups 2.0.2-2
    lib32-libdbus 1.8.16-1
    lib32-libdrm 2.4.60-1
    lib32-libffi 3.2.1-1
    lib32-libgcrypt 1.6.3-1
    lib32-libgpg-error 1.18-1
    lib32-libice 1.0.9-1
    lib32-libidn 1.30-1
    lib32-libjpeg-turbo 1.4.0-1
    lib32-libldap 2.4.40-1
    lib32-libltdl 2.4.5-1
    lib32-libnl 3.2.25-1
    lib32-libogg 1.3.2-1
    lib32-libpcap 1.6.2-1
    lib32-libpciaccess 0.13.4-1
    lib32-libpng 1.6.16-1
    lib32-libpulse 6.0-1
    lib32-libsamplerate 0.1.8-2
    lib32-libsm 1.2.2-1
    lib32-libsndfile 1.0.25-3
    lib32-libssh2 1.5.0-1
    lib32-libtasn1 4.4-1
    lib32-libtiff 4.0.3-3
    lib32-libtxc_dxtn 1.0.1-5
    lib32-libusb 1.0.19-1
    lib32-libvorbis 1.3.5-1
    lib32-libx11 1.6.3-1
    lib32-libxau 1.0.8-1
    lib32-libxcb 1.11-1
    lib32-libxcomposite 0.4.4-2
    lib32-libxcursor 1.1.14-1
    lib32-libxdamage 1.1.4-2
    lib32-libxdmcp 1.1.2-1
    lib32-libxext 1.3.3-1
    lib32-libxfixes 5.0.1-1
    lib32-libxft 2.3.2-1
    lib32-libxi 1.7.4-1
    lib32-libxinerama 1.1.3-1
    lib32-libxml2 2.9.2-1
    lib32-libxmu 1.1.2-1
    lib32-libxrandr 1.4.2-1
    lib32-libxrender 0.9.8-1
    lib32-libxshmfence 1.2-1
    lib32-libxslt 1.1.28-2
    lib32-libxt 1.1.4-1
    lib32-libxtst 1.2.2-1
    lib32-libxxf86vm 1.1.4-1
    lib32-llvm-libs 3.6.0-1
    lib32-mesa 10.5.4-1
    lib32-mpg123 1.22.1-1
    lib32-ncurses 5.9-3
    lib32-nettle 3.1.1-1
    lib32-nspr 4.10.8-1
    lib32-nss 3.18-1
    lib32-nvidia-libgl 349.16-1
    lib32-nvidia-utils 349.16-1
    lib32-openal 1.16.0-1
    lib32-openssl 1.0.2.a-1
    lib32-p11-kit 0.23.1-2
    lib32-pango 1.36.8-1
    lib32-pcre 8.36-1
    lib32-pixman 0.32.6-1
    lib32-portaudio 19_20140130-1
    lib32-readline 6.3.008-1
    lib32-sdl 1.2.15-6
    lib32-soundtouch 1.8.0-1
    lib32-sqlite 3.8.9-1
    lib32-systemd 219-1
    lib32-tdb 1.3.4-1
    lib32-util-linux 2.26.1-1
    lib32-v4l-utils 1.6.0-1
    lib32-wayland 1.7.0-1
    lib32-wxgtk 3.0.2-4
    lib32-xz 5.2.1-1
    lib32-zlib 1.2.8-1
    libabw 0.1.1-1
    libaio 0.3.110-1
    libao 1.2.0-1
    libarchive 3.1.2-8
    libart-lgpl 2.3.21-3
    libass 0.12.1-1
    libassuan 2.2.0-1
    libasyncns 0.8-5
    libatasmart 0.19-3
    libatomic_ops 7.4.2-1
    libavc1394 0.5.4-2
    libbluray 0.8.0-1
    libbsd 0.7.0-1
    libcaca 0.99.beta18-2
    libcanberra 0.30-5
    libcanberra-pulse 0.30-5
    libcap 2.24-2
    libcap-ng 0.7.4-1
    libcddb 1.3.2-4
    libcdio 0.93-1
    libcdio-paranoia 10.2+0.93+1-1
    libcdr 0.1.1-2
    libcl 1.1-4
    libcroco 0.6.8-2
    libcue 1.4.0-4
    libcups 2.0.2-4
    libdaemon 0.14-3
    libdatrie 0.2.8-1
    libdbus 1.8.16-2
    libdca 0.0.5-4
    libdrm 2.4.60-2
    libdv 1.0.0-6
    libdvbpsi 1:1.1.2-1
    libdvdcss 1.3.0-1
    libdvdnav 5.0.2-1
    libdvdread 5.0.1-1
    libe-book 0.1.2-2
    libebml 1.3.1-1
    libedit 20150325_3.1-1
    libepoxy 1.2-2
    libetonyek 0.1.1-1
    libev 4.19-1
    libevdev 1.4.2-1
    libevent 2.0.22-1
    libexif 0.6.21-2
    libffi 3.2.1-1
    libfontenc 1.1.3-1
    libftdi-compat 0.20-1
    libgcrypt 1.6.3-2
    libgcrypt15 1.5.4-4
    libgdm 3.16.1.1-1
    libgee 0.18.0-1
    libglade 2.6.4-5
    libgme 0.6.0-3
    libgnome-keyring 3.12.0-2
    libgnomekbd 3.6.0-2
    libgpg-error 1.19-1
    libgpod 0.8.3-4
    libgssglue 0.4-2
    libgsystem 2015.1-1
    libgtop 2.30.0-1
    libgusb 0.2.4-1
    libgweather 3.16.1-1
    libgxps 0.2.2-3
    libibus 1.5.10-1
    libical 1.0.1-2
    libice 1.0.9-1
    libid3tag 0.15.1b-8
    libidn 1.30-1
    libiec61883 1.2.0-4
    libimobiledevice 1.2.0-1
    libinput 0.14.1-1
    libirman 0.4.5-4
    libjpeg-turbo 1.4.0-1
    libkate 0.4.1-5
    libksba 1.3.3-1
    liblastfm 1.0.9-1
    libldap 2.4.40-2
    liblqr 0.4.2-1
    libmaa 1.3.2-2
    libmad 0.15.1b-7
    libmatroska 1.4.2-1
    libmediainfo 0.7.73-1
    libmikmod 3.3.7-1
    libmm-glib 1.4.6-1
    libmms 0.6.4-1
    libmng 2.0.2-3
    libmodplug 0.8.8.5-1
    libmp4v2 2.0.0-3
    libmpc 1.0.3-1
    libmpcdec 1.2.6-4
    libmpeg2 0.5.1-5
    libmspub 0.1.2-2
    libmtp 1.1.8-1
    libmwaw 0.3.4-1
    libmygpo-qt 1.0.8-1
    libndp 1.4-1
    libnewt 0.52.18-2
    libnl 3.2.25-1
    libnm-glib 1.0.0-2
    libnotify 0.7.6-1
    liboauth 1.0.3-1
    libodfgen 0.1.3-1
    libofa 0.9.3-5
    libogg 1.3.2-1
    libomxil-bellagio 0.9.3-1
    libpagemaker 0.0.2-1
    libpaper 1.1.24-7
    libpcap 1.6.2-1
    libpciaccess 0.13.4-1
    libpipeline 1.4.0-1
    libplist 1.12-1
    libpng 1.6.16-1
    libproxy 0.4.11-5
    libpulse 6.0-1
    libpwquality 1.2.3-1
    libquvi 0.9.4-3
    libquvi-scripts 0.9.20131130-2
    libqzeitgeist 0.8.0-4
    libraw 0.16.0-3
    libraw1394 2.1.0-2
    libreoffice-fresh 4.4.2-1
    librevenge 0.0.2-1
    librpcsecgss 0.19-8
    librsvg 1:2.40.9-1
    libsamplerate 0.1.8-3
    libsasl 2.1.26-7
    libseccomp 2.2.0-1
    libsecret 0.18-1
    libshout 1:2.3.1-2
    libsidplay 1.36.59-6
    libsigc++ 2.4.1-1
    libsigsegv 2.10-2
    libsm 1.2.2-2
    libsndfile 1.0.25-3
    libsodium 1.0.2-1
    libsoup 2.50.0-1
    libspectre 0.2.7-2
    libsrtp 15.1c9bd90-3
    libssh 0.6.5-1
    libssh2 1.5.0-1
    libsystemd 219-6
    libtar 1.2.20-2
    libtasn1 4.4-1
    libteam 1.14-2
    libthai 0.1.21-1
    libtheora 1.1.1-3
    libtiff 4.0.3-5
    libtiger 0.3.4-4
    libtirpc 0.2.5-1
    libtool 2.4.6-1
    libtxc_dxtn 1.0.1-6
    libunibreak 1.1-1
    libunistring 0.9.5-1
    libunwind 1.1-2
    libupnp 1.6.19-1
    libusb 1.0.19-1
    libusb-compat 0.1.5-1
    libusbmuxd 1.0.10-1
    libutempter 1.1.6-2
    libutil-linux 2.26.1-3
    libva 1.5.1-1
    libvdpau 1.1-1
    libvisio 0.1.1-2
    libvisual 0.4.0-5
    libvorbis 1.3.5-1
    libvpx 1.4.0-2
    libwacom 0.11-1
    libwbclient 4.2.1-1
    libwebp 0.4.3-1
    libwmf 0.2.8.4-12
    libwpd 0.10.0-1
    libwpg 0.3.0-1
    libwps 0.3.1-1
    libx11 1.6.3-1
    libx264 2:144.20150223-1
    libx86 1.1-4
    libx86emu 1.1.23.1-1
    libxau 1.0.8-2
    libxaw 1.0.13-1
    libxcb 1.11-1
    libxcomposite 0.4.4-2
    libxcursor 1.1.14-2
    libxdamage 1.1.4-2
    libxdg-basedir 1.2.0-3
    libxdmcp 1.1.2-1
    libxext 1.3.3-1
    libxfixes 5.0.1-1
    libxfont 1.5.1-1
    libxft 2.3.2-1
    libxi 1.7.4-1
    libxinerama 1.1.3-2
    libxkbcommon 0.5.0-1
    libxkbcommon-x11 0.5.0-1
    libxkbfile 1.0.9-1
    libxklavier 5.4-1
    libxml2 2.9.2-2
    libxmu 1.1.2-1
    libxp 1.0.3-1
    libxpm 3.5.11-1
    libxrandr 1.4.2-2
    libxrender 0.9.9-1
    libxshmfence 1.2-1
    libxslt 1.1.28-3
    libxss 1.2.2-2
    libxt 1.1.5-1
    libxtst 1.2.2-1
    libxv 1.0.10-1
    libxvmc 1.0.9-1
    libxxf86dga 1.1.4-1
    libxxf86vm 1.1.4-1
    libyaml 0.1.6-1
    libzen 0.4.31-1
    libzip 0.11.2-1
    licenses 20140629-1
    links 2.9-1
    linux 3.19.3-3
    linux-api-headers 3.18.5-1
    linux-firmware 20150410.ec89525-1
    lirc 1:0.9.2.a-1
    llvm-libs 3.6.0-5
    lm_sensors 3.3.5-1
    logrotate 3.8.9-1
    lpsolve 5.5.2.0-3
    lrzip 0.621-1
    lua 5.2.4-1
    lua-bitop 1.0.2-5
    lua-expat 1.3.0-1
    lua-lgi 0.8.0-2
    lua-socket 3.0rc1-4
    lua51 5.1.5-4
    luajit 2.0.3-3
    lvm2 2.02.116-1
    lxdream 0.9.1-3
    lz4 128-1
    lzo 2.09-1
    m4 1.4.17-1
    make 4.1-1
    man-db 2.7.1-1
    man-pages 3.83-1
    mcomix 1.01-1
    mcpp 2.7.2-5
    mdadm 3.3.2-1
    memtest86+ 5.01-1
    mencoder 37379-3
    mesa 10.5.4-1
    metamorphose2 0.8.3-2
    mime-types 9-1
    minitube 2.4-1
    mjpegtools 2.1.0-1
    mkinitcpio 18-2
    mkinitcpio-busybox 1.21.1-2
    mkvtoolnix-cli 7.8.0-3
    mobile-broadband-provider-info 20120614-2
    morituri-git 0.2.3.r3.gb1d685f-1
    mozilla-common 1.4-4
    mpfr 3.1.2.p11-1
    mpg123 1.22.1-1
    mplayer 37379-3
    mtdev 1.1.5-1
    mutagen 1.28-1
    mutter 3.16.1.1-1
    ncurses 5.9-7
    nemo 2.4.5-1
    neon 0.30.1-1
    net-snmp 5.7.3-1
    netctl 1.10-2
    nettle 3.1.1-1
    network-manager-applet 1.0.0-2
    networkmanager 1.0.0-2
    nfs-utils 1.3.2-6
    nfsidmap 0.26-1
    nm-connection-editor 1.0.0-2
    npth 1.2-1
    nspr 4.10.8-1
    nss 3.18-3
    ntfs-3g 2015.3.14-1
    nvidia 349.16-1
    nvidia-libgl 349.16-1
    nvidia-utils 349.16-1
    ogmtools 1.5-5
    openal 1.16.0-1
    opencore-amr 0.1.3-2
    openjpeg 1.5.2-1
    openmpi 1.8.4-1
    openresolv 3.6.1-1
    openssh 6.8p1-2
    openssl 1.0.2.a-1
    opus 1.1-1
    orc 0.4.23-1
    os-prober 1.64-1
    p11-kit 0.23.1-2
    p7zip 9.38.1-3
    package-query 1.5-2
    pacman 4.2.1-1
    pacman-mirrorlist 20150315-1
    pacmatic 20150126-1
    pam 1.1.8-5
    pambase 20130928-1
    pango 1.36.8-1
    pangomm 2.36.0-1
    par2cmdline-tbb 20141125-1
    parallel 20150322-1
    parted 3.2-2
    patch 2.7.5-1
    pciutils 3.3.1-1
    pcmciautils 018-7
    pcre 8.36-2
    pcsx2-git 1.3.1.r978.1aebca3-1
    perl 5.20.2-1
    perl-clone 0.37-2
    perl-data-dump 1.22-1
    perl-dbi 1.633-1
    perl-encode-locale 1.04-1
    perl-error 0.17023-1
    perl-file-basedir 0.07-1
    perl-file-listing 6.04-2
    perl-file-which 1.09-4
    perl-html-parser 3.71-3
    perl-html-tagset 3.20-4
    perl-http-cookies 6.01-2
    perl-http-daemon 6.01-2
    perl-http-date 6.02-2
    perl-http-message 6.06-2
    perl-http-negotiate 6.01-2
    perl-ipc-system-simple 1.25-1
    perl-libwww 6.08-1
    perl-locale-gettext 1.05-11
    perl-lwp-mediatypes 6.02-2
    perl-net-http 6.07-1
    perl-uri 1.67-1
    perl-www-robotrules 6.02-2
    perl-xml-libxml 2.0121-1
    perl-xml-namespacesupport 1.11-3
    perl-xml-sax 0.99-4
    perl-xml-sax-base 1.08-3
    phonon-qt4 4.8.3-1
    phonon-qt4-gstreamer 4.8.2-1
    phoronix-test-suite 5.6.0-1
    php 5.6.8-2
    pinentry 0.9.1-1
    pixman 0.32.6-1
    pkg-config 0.28-2
    pkgfile 15-1
    pms 1.90.1-1
    podofo 0.9.3-1
    polkit 0.112-2
    poppler 0.32.0-1
    poppler-glib 0.32.0-1
    poppler-qt5 0.32.0-1
    popt 1.16-7
    portaudio 19_20140130-1
    presentproto 1.0-1
    printproto 1.0.5-3
    procps-ng 3.3.10-2
    protobuf 2.6.1-1
    psmisc 22.21-2
    pth 2.0.7-5
    pulseaudio 6.0-1
    pulseaudio-alsa 2-3
    pv 1.6.0-1
    pygobject-devel 3.16.1-1
    pygobject2-devel 2.28.6-11
    pygtk 2.24.0-5
    pyqt4-common 4.11.3-4
    pyqt5-common 5.4.1-2
    python 3.4.3-2
    python-dateutil 2.4.1-1
    python-dbus 1.2.0-4
    python-dbus-common 1.2.0-4
    python-gmpy2 2.0.5-2
    python-gobject 3.16.1-1
    python-html2text 2015.4.14-1
    python-matplotlib 1.4.3-2
    python-mpmath 0.19-1
    python-nose 1.3.6-1
    python-numexpr 2.4.3-1
    python-numpy 1.9.2-2
    python-pandas 0.16.0-2
    python-pygments 2.0.2-2
    python-pyparsing 2.0.3-1
    python-pyqt4 4.11.3-4
    python-pyqt5 5.4.1-2
    python-pytz 2015.2-1
    python-pyzmq 14.5.0-2
    python-scipy 0.15.1-2
    python-setuptools 1:15.2-1
    python-sip 4.16.7-1
    python-six 1.9.0-1
    python-sympy 0.7.6-2
    python-tornado 4.1.0-2
    python-xdg 0.25-2
    python2 2.7.9-1
    python2-apsw 3.8.9-1
    python2-atspi 2.16.0-1
    python2-beaker 1.7.0-1
    python2-cairo 1.10.0-2
    python2-chardet 2.3.0-1
    python2-cherrypy 3.6.0-1
    python2-cssselect 0.9.1-2
    python2-cssutils 1.0-2
    python2-dateutil 2.4.1-1
    python2-dbus 1.2.0-4
    python2-dnspython 1.12.0-1
    python2-gobject 3.16.1-1
    python2-gobject2 2.28.6-11
    python2-html5lib 0.999-5
    python2-lxml 3.4.4-1
    python2-mako 1.0.1-1
    python2-markupsafe 0.23-2
    python2-mechanize 0.2.5-4
    python2-netifaces 0.10.4-1
    python2-pillow 2.8.1-1
    python2-psutil 2.2.1-2
    python2-pycdio 0.20-3
    python2-pygments 2.0.2-2
    python2-pyqt5 5.4.1-2
    python2-setuptools 1:15.2-1
    python2-sip 4.16.7-1
    python2-six 1.9.0-1
    python2-xdg 0.25-2
    qca 2.0.3-5
    qca-ossl 2.0.0-7
    qjson 0.8.1-3
    qpdf 5.1.2-1
    qt4 4.8.6-5
    qt5-base 5.4.1-4
    qt5-declarative 5.4.1-4
    qt5-location 5.4.1-4
    qt5-script 5.4.1-4
    qt5-sensors 5.4.1-4
    qt5-svg 5.4.1-4
    qt5-tools 5.4.1-4
    qt5-translations 5.4.1-4
    qt5-webchannel 5.4.1-4
    qt5-webkit 5.4.1-4
    qt5-xmlpatterns 5.4.1-4
    qtchooser 48-1
    qtwebkit 2.3.4-1
    randrproto 1.4.1-1
    raptor 2.0.15-2
    rasqal 1:0.9.32-1
    readline 6.3.008-1
    recode 3.6-8
    recordproto 1.14.2-2
    redland 1:1.0.17-2
    reflector 2014.11-1
    reiserfsprogs 3.6.24-1
    renderproto 0.11.1-3
    resourceproto 1.2.0-3
    rest 0.7.93-1
    rhash 1.3.3-1
    rng-tools 5-3
    rpcbind 0.2.3-1
    rsync 3.1.1-2
    rtkit 0.11-5
    rtmpdump 20140918-2
    ruby 2.2.2-1
    s-nail 14.8.0-1
    sbc 1.3-1
    schroedinger 1.0.11-2
    scrnsaverproto 1.2.2-2
    sdcv 0.4.2-8
    sdl 1.2.15-7
    sdl_image 1.2.12-3
    sdl_mixer 1.2.12-4
    sdl_net 1.2.8-2
    sdl_ttf 2.0.11-3
    sed 4.2.2-3
    sg3_utils 1.40-1
    shadow 4.2.1-3
    shared-color-targets 0.1.5-1
    shared-mime-info 1.4-1
    sip 4.16.7-1
    slang 2.3.0-1
    smartmontools 6.3-2
    smbclient 4.2.1-1
    smpeg 0.4.5-1
    snappy 1.1.1-1
    sound-theme-freedesktop 0.8-2
    soundtouch 1.8.0-1
    spandsp 0.0.6-1
    speech-dispatcher 0.8.1-1
    speedtest-cli 0.3.1-1
    speex 1.2rc2-1
    speexdsp 1.2rc3-1
    spotify 0.9.17.1-1
    spotify-gnome-git 20141010-1
    sqlite 3.8.9-1
    startup-notification 0.12-4
    steam 1.0.0.49-3
    sudo 1.8.13-1
    suitesparse 4.4.4-1
    sysfsutils 2.1.0-9
    systemd 219-6
    systemd-sysvcompat 219-6
    t1lib 5.1.2-5
    taglib 1.9.1-1
    talloc 2.1.2-1
    tar 1.28-1
    tdb 1.3.4-1
    telepathy-glib 0.24.1-1
    telepathy-logger 0.8.1-1
    telepathy-mission-control 5.16.3-1
    terminology 0.8.0-1
    tevent 0.9.24-1
    texinfo 5.2-3
    texlive-bin 2014.34260-7
    texlive-core 2014.36709-1
    texlive-langchinese 2014.35921-1
    texlive-langcjk 2014.0-1
    texlive-langjapanese 2014.36466-1
    texlive-langkorean 2014.36573-1
    texlive-latexextra 2014.36706-1
    texlive-pictures 2014.36605-1
    texlive-science 2014.36659-1
    texmaker 4.4.1-1
    thin-provisioning-tools 0.4.1-1
    thunderbird 31.6.0-2
    tinyxml 2.6.2-3
    tmux 1.9_a-2
    totem-plparser 3.10.4-1
    transmission-gtk 2.84-1
    tsmuxer 1.10.6-14
    ttf-dejavu 2.34-2
    ttf-ms-fonts 2.0-10
    tzdata 2015d-1
    udisks2 2.1.5-1
    unrar 1:5.2.7-1
    unzip 6.0-10
    upower 0.99.2-2
    usbutils 008-1
    util-linux 2.26.1-3
    v4l-utils 1.6.2-1
    vi 1:050325-4
    videoproto 2.3.2-1
    vim 7.4.712-1
    vim-latexsuite 20130126-2
    vim-runtime 7.4.712-1
    vlc 2.2.1-2
    vte-common 0.40.0-2
    vte3 0.40.0-2
    wavpack 4.70.0-2
    wayland 1.7.0-1
    webkit2gtk 2.8.1-1
    webkitgtk 2.4.8-2
    webrtc-audio-processing 0.1-2
    wesnoth 1.12.2-2
    wesnoth-data 1.12.2-1
    wget 1.16.3-1
    which 2.21-1
    wildmidi 0.3.8-1
    wine 1.7.42-2
    winetricks 20141130-1
    wireless_tools 30.pre9-1
    wpa_supplicant 1:2.3-1
    wxgtk 3.0.2-4
    wxgtk2.8 2.8.12.1-3
    wxpython 3.0.2.0-1
    wxpython2.8 2.8.12.1-1
    x265 1.6-1
    xboxdrv 0.8.5-3
    xcb-proto 1.11-1
    xcb-util 0.4.0-1
    xcb-util-cursor 0.1.2-1
    xcb-util-image 0.4.0-1
    xcb-util-keysyms 0.4.0-1
    xcb-util-renderutil 0.3.9-1
    xcb-util-wm 0.4.1-1
    xdg-su 1.2.3-1
    xdg-utils 1.1.0.git20150323-1
    xdiskusage 1.51-1
    xextproto 7.3.0-1
    xf86-input-evdev 2.9.2-1
    xf86dgaproto 2.1-3
    xf86driproto 2.1.1-3
    xf86vidmodeproto 2.3.1-3
    xfsprogs 3.2.2-1
    xineramaproto 1.2.1-3
    xkeyboard-config 2.14-1
    xorg-appres 1.0.4-1
    xorg-bdftopcf 1.0.5-1
    xorg-font-util 1.3.1-1
    xorg-font-utils 7.6-4
    xorg-fonts-alias 1.0.3-1
    xorg-fonts-encodings 1.0.4-4
    xorg-fonts-misc 1.0.3-3
    xorg-iceauth 1.0.7-1
    xorg-mkfontdir 1.0.7-2
    xorg-mkfontscale 1.1.2-1
    xorg-server 1.17.1-5
    xorg-server-common 1.17.1-5
    xorg-server-devel 1.17.1-5
    xorg-server-utils 7.6-4
    xorg-sessreg 1.1.0-1
    xorg-setxkbmap 1.3.1-1
    xorg-util-macros 1.19.0-1
    xorg-xauth 1.0.9-1
    xorg-xbacklight 1.2.1-1
    xorg-xcmsdb 1.0.5-1
    xorg-xgamma 1.0.6-1
    xorg-xhost 1.0.7-1
    xorg-xinit 1.3.4-2
    xorg-xinput 1.6.1-1
    xorg-xkbcomp 1.3.0-1
    xorg-xmessage 1.0.4-2
    xorg-xmodmap 1.0.9-1
    xorg-xrandr 1.4.3-1
    xorg-xrdb 1.1.0-1
    xorg-xrefresh 1.0.5-1
    xorg-xset 1.2.3-1
    xorg-xsetroot 1.1.1-2
    xproto 7.0.27-1
    xscreensaver 5.32-1
    xvidcore 1.3.3-1
    xz 5.2.1-1
    yajl 2.1.0-1
    yaourt 1.5-1
    zenity 3.14.0-1
    zeromq 4.0.5-1
    zita-alsa-pcmi 0.2.0-2
    zita-resampler 1.3.0-3
    zlib 1.2.8-3
    zvbi 0.2.35-1
    zziplib 0.13.62-2
    [edit5] My /etc/modules-load.d directory is empty by the way, and "sudo /usr/lib/systemd/systemd-modules-load" returns nothing. Note, this is all while running Linux 3.19, but I believe it should demonstrate that I don't have any special modules running. Or so I believe.
    Last edited by nstgc (2015-05-04 13:16:09)

  • Kichat: How do I get iChat 3 working ? Upgrade hints, FAQ

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    How do I get iChat 3 working ? Upgrade hints:FAQ
    Trouble Shooting Revisited
    Ok We will start with loading Tiger and iChat version 3.0
    From Panther
    There are or were serveral Add-ons and applications avaiblable to Panther users of iChat that are not compatible with iChat 3.
    These following need to be deleted.
    iCAR - An Add-on that posts an Auto response Away message (produces a 1 fps result in a Video chat)
    Virex for Panther - An Anti Virus app avialable to @mac account users (Produces the 1 fsp problem)
    iChatUSBCam for Panther/iChat2.x - A Add-on utility for using iSight or USB cam with iChat2.x (Incompatible with Tiger/iChat 3)
    iProfile - An Add-on for producing a profile on the AIM server that ichat 2.x could not do (not proven to be a problem but now not needed).
    A clean install of Tiger (not Archive and Install) produces the best results.
    But any install should also check these Tiger settings.
    First, UPGRADE to 10.4.3 as this gets past many Connection issues that became apparent with the basic Tiger (10.4) and iChat 3.0 It updates iChat to version 3.1
    Check Settings
    Don't be complacent that you have not set anything different.
    There are several new things in Tiger that may trip you up.
    These are worth looking at:
    Mac Firewall. Now includes the ability to Block all UDP traffic in the Advanced button (System Preferences > Sharing >Firewall tab then the Advanced Button).
    Also can now open UDP protocol for ports where as the Panther one only did TCP (Check any old Panther settings you Added to the presets).
    The ports should be:
    TCP -5190
    UDP -5060, 5190, 5678, 16384-16403
    There are more ports for Bonjour 5297, 5298, 5353 UDP and 5298 TCP and Jabber, 5220, 5222, 5223 on TCP)
    (Table View see 7th Sept)
    QuickTime. This has a change in the name of the Connection Speed tab to Streaming (System Preferences > QuickTime) Check this is set to be equal to your connection speed (the download one if this is faster). See Apple Doc 301641 Dated 9th November 2005.
    Date & Time. Not conclusively involved but worth eliminating. Set a Network Server and the correct Time Zone.
    Apple Remote Desktop. If this is active in System Preferences > Sharing > Services tab it causes problems for iChat.
    Next, test the actual speed you are getting from your ISP.
    http://www.dslreports.com/stest
    There is a table here of the speeds you need:
    http://docs.info.apple.com/article.html?artnum=301050
    The one you get linked to in the Help menu is wrong.
    Other Known Problems
    There are several other applications that iChat 3 does not seem to like.
    folding@home This is a application that uses spare processor time to help find protein chains for a University.
    PostgreSQL This is a data base application that can be reset to allow more processor time for iChat. See here http://www.murraywilliams.com/blog/archives/000046.html
    Lotus Notes Some people have reported problems with this.
    Make sure any Add-on Video cards or input PCI cards have up to date Firmware
    IF you are still having problems I would do Routine Maintenance Tasks as laid out here.
    Lastly, some routers/modems are SIP aware and give different results in iChat 3 compared to iChat 2.
    This is due to the Operating System changing (like a new computer connecting to the modem) rather than iChat.
    See My web pages: page4 at the SIP Text in a Box section.
    Also for the above try some housekeeping particularly if you do not keep your Computer on 24/7 Gulliver, "kmosx3: Mac OS X 10.3/10.4: System maintenance"
    Ralph
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    i think apple needs to keep up with the jones here, so far i read at LOGIC PRO FORUMS many saying cubase and pro tools left logic in the dust, 1 year ago already, sad, but true
    in anycase, trye starting one app before the other to see which combination works., other wise i think more apps will fall out of sync with old logic pro

  • How can I upgrade my G3, 640 Ram, 500 MHz, with OS 10.2.8

    Hi all,
    I'm revisiting my old iBook, described above in Subject line. (Wow, it's been a while. Now use an iMac and MacBookPro. This little lovely is so slow!)
    1. What is the newest OS that I might upgrade it to?
    2. Right now, the wireless icon in upper right shows black rings--meaning it is picking up a signal--but it won't connect to the internet. I get an error message that says it can't find the particular server (no matter what address I insert). For example, it can't find http://www.apple.com.
    Can anyone help out with these two issues?
    Thanks!

    Roam and Ronda, thank you so much for getting back so quickly.
    Ronda, your post really hit the nail on the head for me. Trying to think out the problem, I thought it might be that I'm using an Airport Extreme now. I will look at the documentation or the app and see how to allow earlier cards to make contact via mixed mode.
    Also Roam--long ago, I bought 10.4.1 for an earlier upgrade. I tried to upgrade my dual USB but can't get there. Upon clicking the restart button to proceed (as it requests at the initial screen when just opened), it restarts and I get a dark grey screen with a lot of confusing text (some overlayed). Some about kernal, some in various languages telling me it can't find a driver and I must reboot . . . .
    But no way to get out except to shut down. Then found a way to eject the disk on startup. Yikes.
    Per your thought, I don't have to upgrade if I can get wireless to work. I'd like to give this iBook to my sister-in-law who simply wants to do research on the web. I'm hoping Safari will work fast enough to be of use to her. But I have a feeling things will be slow. We've come so far over the past 9 years! I worry this may be more painful than useful to her . . . .
    Thanks again, both of you!! Enjoy this day.

  • [SOLVED] No sound anymore after latest upgrade

    Hello,
    i did the following upgrade
    [2014-01-25 16:06] [PACMAN] starting full system upgrade
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Füge Schlüssel aus archlinux.gpg hinzu ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: 3 marginal-needed, 1 complete-needed, PGP Vertrauensmodell
    [2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: Tiefe: 0 gültig: 1 signiert: 5 Vertrauen: 0-, 0q, 0n, 0m, 0f, 1u
    [2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: Tiefe: 1 gültig: 5 signiert: 59 Vertrauen: 0-, 0q, 0n, 5m, 0f, 0u
    [2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: Tiefe: 2 gültig: 59 signiert: 4 Vertrauen: 59-, 0q, 0n, 0m, 0f, 0u
    [2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: nächste "Trust-DB"-Pflichtüberprüfung am 2016-01-22
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Signiere die vertrauenswürdigen Schlüssel im Schlüsselbund lokal ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 0E8B644079F599DFC1DDC3973348882F6AC6A4C2 lokal ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 684148BB25B49E986A4944C55184252D824B18E8 lokal ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 44D4A033AC140143927397D47EFD567D4C7EA887 lokal ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 27FFC4769E19F096D41D9265A04F9397CDFD6BB0 lokal ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel AB19265E5D7D20687D303246BA1DFB64FFF979E7 lokal ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Importiere die Vertrauenswerte des Benutzers ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Mache widerrufene Schlüssel im Schlüsselbund unbrauchbar ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6 unbrauchbar ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 7FA647CD89891DEDC060287BB9113D1ED21E1A55 unbrauchbar ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel BC1FBE4D2826A0B51E47ED62E2539214C6C11350 unbrauchbar ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2 unbrauchbar ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 63F395DE2D6398BBE458F281F2DBB4931985A992 unbrauchbar ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196 unbrauchbar ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 8F76BEEA0289F9E1D3E229C05F946DED983D4366 unbrauchbar ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 66BD74A036D522F51DD70A3C7F2A16726521E06D unbrauchbar ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 81D7F8241DB38BC759C80FCE3A726C6170E80477 unbrauchbar ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel E7210A59715F6940CF9A4E36A001876699AD6E84 unbrauchbar ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Aktualisiere Trust-Datenbank ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: nächste "Trust-DB"-Pflichtüberprüfung am 2016-01-22
    [2014-01-25 17:38] [PACMAN] upgraded archlinux-keyring (20140108-1 -> 20140124-1)
    [2014-01-25 17:38] [PACMAN] upgraded libdrm (2.4.51-1 -> 2.4.52-1)
    [2014-01-25 17:38] [PACMAN] upgraded wayland (1.3.0-1 -> 1.4.0-1)
    [2014-01-25 17:38] [PACMAN] upgraded libdbus (1.6.18-3 -> 1.8.0-1)
    [2014-01-25 17:38] [PACMAN] upgraded dbus (1.6.18-3 -> 1.8.0-1)
    [2014-01-25 17:38] [PACMAN] upgraded libgcrypt (1.5.3-1 -> 1.6.0-2)
    [2014-01-25 17:38] [PACMAN] upgraded systemd (208-3 -> 208-10)
    [2014-01-25 17:38] [PACMAN] upgraded llvm-libs (3.3-1 -> 3.4-1)
    [2014-01-25 17:38] [PACMAN] upgraded mesa (10.0.1-2 -> 10.0.2-1)
    [2014-01-25 17:38] [PACMAN] upgraded mesa-libgl (10.0.1-2 -> 10.0.2-1)
    [2014-01-25 17:38] [PACMAN] upgraded ati-dri (10.0.1-2 -> 10.0.2-1)
    [2014-01-25 17:38] [PACMAN] upgraded bluez (5.13-1 -> 5.14-1)
    [2014-01-25 17:38] [PACMAN] upgraded xdg-utils (1.1.0.git20130520-1 -> 1.1.0.git20140109-1)
    [2014-01-25 17:38] [PACMAN] upgraded chromium (31.0.1650.63-1 -> 32.0.1700.77-1)
    [2014-01-25 17:38] [PACMAN] upgraded gdk-pixbuf2 (2.30.2-1 -> 2.30.3-1)
    [2014-01-25 17:38] [PACMAN] upgraded cogl (1.16.0-3 -> 1.16.2-1)
    [2014-01-25 17:38] [PACMAN] upgraded clutter (1.16.2-1 -> 1.16.4-1)
    [2014-01-25 17:38] [PACMAN] upgraded device-mapper (2.02.104-1 -> 2.02.105-1)
    [2014-01-25 17:38] [PACMAN] upgraded cryptsetup (1.6.3-1 -> 1.6.3-2)
    [2014-01-25 17:38] [PACMAN] upgraded curl (7.34.0-2 -> 7.34.0-3)
    [2014-01-25 17:38] [PACMAN] upgraded cython (0.19.2-1 -> 0.20-1)
    [2014-01-25 17:38] [PACMAN] upgraded pth (2.0.7-4 -> 2.0.7-5)
    [2014-01-25 17:38] [PACMAN] upgraded dirmngr (1.1.1-1 -> 1.1.1-2)
    [2014-01-25 17:38] [PACMAN] upgraded gnutls (3.2.8-1 -> 3.2.9-1)
    [2014-01-25 17:38] [PACMAN] upgraded libvorbis (1.3.3-1 -> 1.3.4-1)
    [2014-01-25 17:38] [PACMAN] upgraded ffmpeg (1:2.1.1-3 -> 1:2.1.3-1)
    [2014-01-25 17:38] [PACMAN] upgraded gcr (3.10.1-1 -> 3.10.1-2)
    [2014-01-25 17:38] [PACMAN] upgraded gdbm (1.10-3 -> 1.11-1)
    [2014-01-25 17:38] [PACMAN] upgraded gedit (3.10.3-1 -> 3.10.4-1)
    [2014-01-25 17:38] [PACMAN] upgraded gettext (0.18.3.1-2 -> 0.18.3.2-1)
    [2014-01-25 17:38] [PACMAN] upgraded libcups (1.7.0-2 -> 1.7.1-3)
    [2014-01-25 17:38] [PACMAN] installed libpaper (1.1.24-7)
    [2014-01-25 17:38] [PACMAN] upgraded ghostscript (9.10-1 -> 9.10-3)
    [2014-01-25 17:38] [PACMAN] upgraded glamor-egl (0.5.1-1 -> 0.5.1.r258-1)
    [2014-01-25 17:38] [PACMAN] upgraded gnome-chess (3.10.2-2 -> 3.10.3-1)
    [2014-01-25 17:38] [PACMAN] upgraded gnome-desktop (1:3.10.1-2 -> 1:3.10.2-1)
    [2014-01-25 17:38] [PACMAN] upgraded gnome-keyring (3.10.1-1 -> 3.10.1-2)
    [2014-01-25 17:38] [PACMAN] upgraded gnome-online-miners (3.10.2-1 -> 3.10.3-1)
    [2014-01-25 17:38] [PACMAN] upgraded libsecret (0.16-1 -> 0.16-2)
    [2014-01-25 17:38] [PACMAN] upgraded mutter (3.10.2-2 -> 3.10.3-1)
    [2014-01-25 17:38] [PACMAN] upgraded gnome-shell (3.10.2.1-4 -> 3.10.3-1)
    [2014-01-25 17:38] [PACMAN] upgraded gnupg (2.0.22-1 -> 2.0.22-2)
    [2014-01-25 17:38] [PACMAN] upgraded grilo-plugins (0.2.9-2 -> 0.2.9-3)
    [2014-01-25 17:38] [PACMAN] upgraded gstreamer0.10-ugly (0.10.19-8 -> 0.10.19-9)
    [2014-01-25 17:38] [PACMAN] upgraded libcdio (0.90-2 -> 0.92-1)
    [2014-01-25 17:38] [PACMAN] upgraded gstreamer0.10-ugly-plugins (0.10.19-8 -> 0.10.19-9)
    [2014-01-25 17:38] [PACMAN] upgraded gtk-vnc (0.5.3-1 -> 0.5.3-3)
    [2014-01-25 17:38] [PACMAN] upgraded libcdio-paranoia (10.2+0.90+1-1 -> 10.2+0.90+1-2)
    [2014-01-25 17:38] [PACMAN] upgraded gvfs (1.18.3-1 -> 1.18.3-3)
    [2014-01-25 17:38] [PACMAN] upgraded python-dbus-common (1.2.0-1 -> 1.2.0-2)
    [2014-01-25 17:38] [PACMAN] upgraded python2-dbus (1.2.0-1 -> 1.2.0-2)
    [2014-01-25 17:38] [PACMAN] upgraded libibus (1.5.4-3 -> 1.5.5-1)
    [2014-01-25 17:38] [PACMAN] upgraded ibus (1.5.4-3 -> 1.5.5-1)
    [2014-01-25 17:38] [PACMAN] upgraded inetutils (1.9.1.341-2 -> 1.9.2-1)
    [2014-01-25 17:38] [PACMAN] upgraded iptables (1.4.20-1 -> 1.4.21-1)
    [2014-01-25 17:38] [PACMAN] upgraded iproute2 (3.11.0-1 -> 3.12.0-1)
    [2014-01-25 17:38] [PACMAN] upgraded isl (0.12.1-2 -> 0.12.2-1)
    [2014-01-25 17:38] [PACMAN] upgraded jack (0.121.3-7 -> 0.124.1-1)
    [2014-01-25 17:38] [PACMAN] upgraded lib32-dbus (1.6.18-1 -> 1.8.0-1)
    [2014-01-25 17:38] [PACMAN] upgraded lib32-gettext (0.18.3.1-1 -> 0.18.3.2-1)
    [2014-01-25 17:38] [PACMAN] upgraded lib32-libcap (2.22-2 -> 2.24-1)
    [2014-01-25 17:38] [PACMAN] upgraded lib32-libdrm (2.4.51-1 -> 2.4.52-1)
    [2014-01-25 17:38] [PACMAN] upgraded lib32-libgcrypt (1.5.3-1 -> 1.6.0-1)
    [2014-01-25 17:38] [PACMAN] upgraded lib32-llvm-libs (3.3-1 -> 3.4-1)
    [2014-01-25 17:38] [PACMAN] upgraded lib32-systemd (208-1 -> 208-2)
    [2014-01-25 17:38] [PACMAN] upgraded lib32-mesa (10.0.1-1 -> 10.0.2-1)
    [2014-01-25 17:38] [PACMAN] upgraded lib32-mesa-libgl (10.0.1-1 -> 10.0.2-1)
    [2014-01-25 17:38] [PACMAN] upgraded libxslt (1.1.28-2 -> 1.1.28-3)
    [2014-01-25 17:38] [PACMAN] upgraded libgda (5.2.1-1 -> 5.2.1-2)
    [2014-01-25 17:38] [PACMAN] upgraded libgnome-keyring (3.10.1-1 -> 3.10.1-2)
    [2014-01-25 17:38] [PACMAN] upgraded libraw (0.15.4-3 -> 0.16.0-1)
    [2014-01-25 17:38] [PACMAN] upgraded rasqal (1:0.9.30-3 -> 1:0.9.30-4)
    [2014-01-25 17:38] [PACMAN] upgraded redland (1:1.0.16-2 -> 1:1.0.17-1)
    [2014-01-25 17:38] [PACMAN] upgraded libreoffice-common (4.1.4-1 -> 4.1.4-3)
    [2014-01-25 17:38] [PACMAN] upgraded libreoffice-base (4.1.4-1 -> 4.1.4-3)
    [2014-01-25 17:38] [PACMAN] upgraded libreoffice-calc (4.1.4-1 -> 4.1.4-3)
    [2014-01-25 17:38] [PACMAN] upgraded libreoffice-draw (4.1.4-1 -> 4.1.4-3)
    [2014-01-25 17:38] [PACMAN] upgraded libreoffice-gnome (4.1.4-1 -> 4.1.4-3)
    [2014-01-25 17:38] [PACMAN] upgraded libreoffice-impress (4.1.4-1 -> 4.1.4-3)
    [2014-01-25 17:38] [PACMAN] upgraded libreoffice-math (4.1.4-1 -> 4.1.4-3)
    [2014-01-25 17:38] [PACMAN] upgraded libreoffice-writer (4.1.4-1 -> 4.1.4-3)
    [2014-01-25 17:38] [PACMAN] upgraded libwbclient (4.1.3-1 -> 4.1.4-1)
    [2014-01-25 17:38] [PACMAN] upgraded linux-firmware (20131013.7d0c7a8-1 -> 20140123.418320b-1)
    [2014-01-25 17:38] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Starting build: 3.12.8-1-ARCH
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Starting build: 3.12.8-1-ARCH
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-01-25 17:38] [PACMAN] upgraded linux (3.12.7-1 -> 3.12.8-1)
    [2014-01-25 17:38] [PACMAN] upgraded lvm2 (2.02.104-1 -> 2.02.105-1)
    [2014-01-25 17:38] [PACMAN] upgraded man-pages (3.55-1 -> 3.56-1)
    [2014-01-25 17:38] [PACMAN] upgraded pcre (8.34-1 -> 8.34-2)
    [2014-01-25 17:38] [PACMAN] upgraded perl (5.18.1-1 -> 5.18.2-2)
    [2014-01-25 17:38] [PACMAN] upgraded procps-ng (3.3.9-1 -> 3.3.9-2)
    [2014-01-25 17:38] [PACMAN] upgraded python-dbus (1.2.0-1 -> 1.2.0-2)
    [2014-01-25 17:38] [PACMAN] upgraded s-nail (14.5.1-1 -> 14.5.2-1)
    [2014-01-25 17:39] [PACMAN] upgraded webkitgtk (2.2.3-1 -> 2.2.4-1)
    [2014-01-25 17:39] [PACMAN] upgraded shotwell (0.15.1-1 -> 0.15.1-2)
    [2014-01-25 17:39] [PACMAN] upgraded smbclient (4.1.3-1 -> 4.1.4-1)
    [2014-01-25 17:39] [PACMAN] upgraded sudo (1.8.8-1 -> 1.8.9.p4-1)
    [2014-01-25 17:39] [PACMAN] upgraded systemd-sysvcompat (208-3 -> 208-10)
    [2014-01-25 17:39] [PACMAN] upgraded totem-plparser (3.10.0-3 -> 3.10.0-4)
    [2014-01-25 17:39] [PACMAN] upgraded vino (3.10.1-1 -> 3.10.1-2)
    [2014-01-25 17:39] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
    [2014-01-25 17:39] [PACMAN] upgraded virtualbox-host-modules (4.3.6-3 -> 4.3.6-4)
    [2014-01-25 17:39] [PACMAN] upgraded virtualbox (4.3.6-2 -> 4.3.6-3)
    [2014-01-25 17:39] [PACMAN] upgraded vlc (2.1.2-2 -> 2.1.2-3)
    [2014-01-25 17:39] [PACMAN] upgraded wine (1.7.10-1 -> 1.7.11-1)
    [2014-01-25 17:39] [PACMAN] upgraded xextproto (7.2.1-1 -> 7.3.0-1)
    [2014-01-25 17:39] [PACMAN] upgraded xf86-input-evdev (2.8.2-1 -> 2.8.2-2)
    [2014-01-25 17:39] [PACMAN] upgraded xf86-video-ati (1:7.2.0-1 -> 1:7.2.0-2)
    [2014-01-25 17:39] [PACMAN] upgraded xorg-server-common (1.14.5-2 -> 1.15.0-5)
    [2014-01-25 17:39] [PACMAN] installed libxshmfence (1.1-1)
    [2014-01-25 17:39] [PACMAN] upgraded xorg-server (1.14.5-2 -> 1.15.0-5)
    [2014-01-25 17:39] [PACMAN] upgraded yelp (3.10.1-1 -> 3.10.1-2)
    [2014-01-25 17:39] [PACMAN] upgraded youtube-dl (2014.01.17.2-1 -> 2014.01.23.4-1)
    And dont have any sound anymore, nowhere. PulseAudio is just ignoring my sound-card completely and KDE/GNOME System settings tell me that i do not even have any soundcard
    Alsamixer detects the soundcard fine and if i unmute the soundcard there, it works. But its not really comfortable to change the volume with Alsamixer. Also i have no ability to change between HDMI and Analog.
    Any idea what could have cause this? As you can see in the logs, there havent been any major kernel update nor pulseaudio update.
    This is the Soundcard: Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
    Kernel Module is snd_hda_intel which is loaded and working
    Seems like Pulseaudio is not running at all, it also does not start with the message "E: [pulseaudio] core-util.c: Home directory not accessible: Permission denied" which is not true
    Last edited by Vamp898 (2014-01-26 15:29:22)

    Ok, found out it was true.
    Seems like whatever reason i have to find out reset some files (not all) to root, so i was no longer the owner of some random files for whatever reason.
    Works now.

  • 9.2 Client Upgrade Necessary?

    Hello all,
    I'm working in a large group, and a decsion has been made to upgrade the SERVER from 9.0 to 9.2. Is it absoluetely necessary (from a JDBC standpoint) to upgrade the CLIENTs on all the dev machines?
    In the past, the upgrades haven't mattered all that much... I just wnated to make sure.
    Thanks,
    Stu

    My understanding is that you need to upgrade at least the version of the JDBC driver (which may or may not entail an Oracle client upgrade). The JDBC drivers are backwards compatible, but not necessarily forward compatible as I understand it.
    Realistically, you probably won't have any problems running 9.0 JDBC drivers against a 9.2 database, but I tend to err on the side of paranoia.
    Justin

  • Database performance is poor after upgrading to 9i

    hi Guys
    My system was upgraded to 9i by the third party after that I took over from that and I am getting the continuous complaints regarding performance of Database.
    there are 150 Users who connects using citrix , from different locations and DB size is 20 GB.
    this is my Init Ora file
    # Cache and I/O
    db_block_size = 4096
    db_cache_size=591396864
    db_file_multiblock_read_count=16
    # Cursors and Library cache
    open_cursors=3000
    # Database Identification
    db_domain=""
    db_name=db_live
    # Diagnostics and Statistics
    background_dump_dest=D:\oracle\admin\db_live\bdump
    core_dump_dest=D:\oracle\admin\db_live\cdump
    timed_statistics=TRUE
    user_dump_dest=D:\oracle\admin\db_live\udump
    # File Configuration
    control_files=("D:\oracle\oradata\db_live\control01.ctl","D:\oracle\oradata\db_live\control02.ctl","D:\oracle\oradata\db_live\control03.ctl")
    # Instance Identification
    instance_name = live
    # Job Queues
    job_queue_processes=10
    # MTS
    dispatchers = "(PROTOCOL=TCP)"
    # Miscellaneous
    aq_tm_processes = 1
    compatible=9.2.0.0.0
    # Optimizer
    hash_join_enabled=TRUE
    query_rewrite_enabled=FALSE
    star_transfformation_enabled=FALSE
    # Pools
    java_pool_size=0
    large_pool_size=145752064
    shared_pool_size=197132288
    # Processes and Sessions
    processes=400
    # Redo Log and Recovery
    fast_start_mttr_target=300
    # Security and Auditing
    remote_login_passwordfile=EXCLUSIVE
    # SORT, HASH Joins, Bitmap Indexes
    pga_aggregate_target=525336576
    sort_area_size=524288
    # System Managed Undo and Rollback Segments
    undo_management=AUTO
    undo_retention=10800
    undo_tablespace=UNDOTBS1
    I feel SGA size and Sort area size are not correct if we increase the value of both will it solve some my problem
    Abhi

    I have run the some scripts to check the performance
    Here is the ouput :
    Hit Ratio Section
    =========================
    BUFFER HIT RATIO
    =========================
    (should be > 70, else increase db_block_buffers in init.ora)
    Buffer Hit Ratio
    77
    logical_reads phys_reads phy_writes BUFFER HIT RATIO
    89,127,477 20,013,061 1,556,989 78
    =========================
    DATA DICT HIT RATIO
    =========================
    (should be higher than 90 else increase shared_pool_size in init.ora)
    Data Dict. Gets Data Dict. cache misses DATA DICT CACHE HIT RATIO
    11,785,386 40,955 99
    =========================
    LIBRARY CACHE MISS RATIO
    =========================
    (If > .1, i.e., more than 1% of the pins resulted in reloads, then
    increase the shared_pool_size in init.ora)
    executions Cache misses while executing LIBRARY CACHE MISS RATIO
    9,845,481 11,831 .0012
    =========================
    Library Cache Section
    =========================
    hit ratio should be > 70, and pin ratio > 70 ...
    NAMESPACE Hit ratio pin hit ratio reloads
    SQL AREA 70 94 7,293
    TABLE/PROCEDURE 99 98 4,529
    BODY 87 68 9
    TRIGGER 99 99 0
    INDEX 98 98 0
    CLUSTER 98 98 0
    OBJECT 100 100 0
    PIPE 100 100 0
    JAVA SOURCE 100 100 0
    JAVA RESOURCE 100 100 0
    JAVA DATA 100 100 0
    =========================
    REDO LOG BUFFER
    =========================
    redo log space requests 37
    Pool's Free Memory
    POOL NAME BYTES
    shared pool free memory 8,075,760
    large pool free memory 127,547,048
    SQL Summary Section
    Tot SQL run since startup SQL executing now
    4,727,276 3,833
    Lock Section
    =========================
    SYSTEM-WIDE LOCKS - all requests for locks or latches
    =========================
    Processing Locks and Latches, please standby...
    User Lock Type Mode Held
    XR Null
    Temp Segment Row-X (SX)
    SYNTECH Transaction Exclusive
    SYNTECH DML Row-S (SS)
    SYNTECH Transaction Exclusive
    SYNTECH DML Row-X (SX)
    SYNTECH DML Row-X (SX)
    SYNTECH DML Row-X (SX)
    SYNTECH Transaction Exclusive
    SYNTECH DML Row-S (SS)
    =========================
    DDL LOCKS - These are usually triggers or other DDL
    =========================
    User Owner Name Type Mode held
    SYNTECH SYS DBMS_TRANSACTIO Table/Procedure/Type Null
    SYNTECH SYS DBMS_TRANSACTIO Table/Procedure/Type Null
    SYNTECH SYNTECH SW_LUC_SEQ Table/Procedure/Type Null
    SYNTECH SYS DBMS_UTILITY Body Null
    SYNTECH SYS DBMS_UTILITY Body Null
    SYSTEM SYSTEM SYSTEM 18 Null
    SYNTECH SYS DBMS_UTILITY Table/Procedure/Type Null
    SYNTECH SYS DBMS_UTILITY Table/Procedure/Type Null
    SYSTEM SYS DBMS_OUTPUT Body Null
    SUMMIT SUMMIT SUMMIT 18 Null
    SUMMIT SUMMIT SUMMIT 18 Null
    User Owner Name Type Mode held
    SUMMIT SUMMIT SUMMIT 18 Null
    SUMMIT SUMMIT SUMMIT 18 Null
    SUMMIT SUMMIT SUMMIT 18 Null
    SUMMIT SUMMIT SUMMIT 18 Null
    SUMMIT SUMMIT SUMMIT 18 Null
    SUMMIT SUMMIT SUMMIT 18 Null
    SUMMIT SUMMIT SUMMIT 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    User Owner Name Type Mode held
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    User Owner Name Type Mode held
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    User Owner Name Type Mode held
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    User Owner Name Type Mode held
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    User Owner Name Type Mode held
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    User Owner Name Type Mode held
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYNTECH SYNTECH 18 Null
    SYNTECH SYS DBMS_TRANSACTIO Body Null
    User Owner Name Type Mode held
    SYNTECH SYS DBMS_TRANSACTIO Body Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    User Owner Name Type Mode held
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SUMMIT SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SUMMIT SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    User Owner Name Type Mode held
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    User Owner Name Type Mode held
    SUMMIT SYS DATABASE 18 Null
    SUMMIT SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    User Owner Name Type Mode held
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYSTEM SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    User Owner Name Type Mode held
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    User Owner Name Type Mode held
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SUMMIT SYS DATABASE 18 Null
    SUMMIT SYS DATABASE 18 Null
    SUMMIT SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SUMMIT SYS DATABASE 18 Null
    SUMMIT SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    User Owner Name Type Mode held
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYNTECH SYS DATABASE 18 Null
    SYSTEM SYS DBMS_OUTPUT Table/Procedure/Type Null
    SYNTECH SYS DBMS_APPLICATIO Table/Procedure/Type Null
    SYNTECH SYS DBMS_APPLICATIO Table/Procedure/Type Null
    SYSTEM SYS DBMS_APPLICATIO Table/Procedure/Type Null
    SYNTECH SYS DBMS_APPLICATIO Body Null
    SYNTECH SYS DBMS_APPLICATIO Body Null
    SYSTEM SYS DBMS_APPLICATIO Body Null
    =========================
    DML LOCKS - These are table and row locks...
    =========================
    User Owner Name Mode held
    SYNTECH SYNTECH SYJOBTRN Row-S (SS)
    SYNTECH SYNTECH JCINVTRN Row-X (SX)
    SYNTECH SYNTECH JCBATCH Row-S (SS)
    SYNTECH SYNTECH JCIVBK Row-X (SX)
    SYNTECH SYNTECH JCWSTG Row-S (SS)
    SYNTECH SYNTECH JCINVC Row-X (SX)
    Latch Section
    if miss_ratio or immediate_miss_ratio > 1 then latch
    contention exists, decrease LOG_SMALL_ENTRY_MAX_SIZE in init.ora
    NAME miss_ratio immediate_miss_ratio
    library cache .04 .24
    virtual circuit queues .42 .00
    Rollback Segment Section
    if any count below is > 1% of the total number of requests for data
    then more rollback segments are needed
    CLASS COUNT
    free list 0
    undo block 1
    undo header 201
    system undo block 0
    system undo header 0
    Tot # of Requests for Data
    89,163,600
    =========================
    ROLLBACK SEGMENT CONTENTION
    =========================
    If any ratio is > .01 then more rollback segments are needed
    NAME WAITS GETS Ratio
    SYSTEM 0 625 .00000
    _SYSSMU1$                              31      67196    .00046                 
    _SYSSMU2$                               0      30118    .00000                 
    _SYSSMU3$                              18      75372    .00024                 
    _SYSSMU4$                               9      36534    .00025                 
    _SYSSMU5$                              28     173253    .00016                 
    _SYSSMU6$                               0      31350    .00000                 
    _SYSSMU7$                               0      28957    .00000                 
    _SYSSMU8$                              10      62721    .00016                 
    _SYSSMU9$                               3      44480    .00007                 
    _SYSSMU10$                             37      42719    .00087                 
    NAME WAITS GETS Ratio
    _SYSSMU11$                              0      20228    .00000                 
    _SYSSMU12$                              1      19168    .00005                 
    Session Event Section
    if average-wait > 20 then contention might exists
    EVENT TOTAL_WAITS TOTAL_TIMEOUTS AVERAGE_WAIT
    latch free 5 1 1
    latch free 2 0 1
    buffer busy waits 362 0 1
    buffer busy waits 1 0 25
    buffer busy waits 217 0 1
    log buffer space 4 0 5
    log file switch completion 4 0 3
    log file switch completion 7 0 3
    log file sync 253 0 1
    log file sync 12 1 11
    log file sync 307 1 1
    EVENT TOTAL_WAITS TOTAL_TIMEOUTS AVERAGE_WAIT
    db file sequential read 776 0 1
    db file sequential read 53 0 3
    db file sequential read 2,791 0 1
    db file sequential read 2,125 0 1
    db file sequential read 728 0 1
    db file sequential read 12 0 1
    db file sequential read 1,710 0 1
    db file sequential read 237 0 1
    db file sequential read 1 0 1
    db file sequential read 404 0 1
    db file sequential read 731 0 1
    EVENT TOTAL_WAITS TOTAL_TIMEOUTS AVERAGE_WAIT
    db file sequential read 1 0 1
    db file sequential read 18 0 1
    db file sequential read 11 0 3
    db file sequential read 4 0 1
    db file sequential read 64 0 4
    db file sequential read 119 0 1
    db file sequential read 1 0 1
    db file sequential read 3 0 2
    db file sequential read 511 0 2
    db file sequential read 608 0 1
    db file sequential read 2 0 1
    EVENT TOTAL_WAITS TOTAL_TIMEOUTS AVERAGE_WAIT
    db file sequential read 6 0 1
    db file sequential read 5 0 1
    db file sequential read 80 0 1
    db file sequential read 74 0 2
    db file sequential read 40 0 3
    db file sequential read 876 0 1
    db file sequential read 2,791 0 1
    db file sequential read 5 0 1
    db file sequential read 2 0 1
    db file sequential read 315 0 1
    db file scattered read 7 0 1
    EVENT TOTAL_WAITS TOTAL_TIMEOUTS AVERAGE_WAIT
    db file scattered read 15 0 1
    db file scattered read 5 0 4
    db file scattered read 8 0 1
    db file scattered read 2 0 1
    db file scattered read 1 0 1
    db file scattered read 8 0 1
    db file scattered read 129 0 1
    db file scattered read 7 0 5
    db file scattered read 1 0 1
    db file scattered read 6 0 1
    db file scattered read 4 0 1
    EVENT TOTAL_WAITS TOTAL_TIMEOUTS AVERAGE_WAIT
    db file scattered read 2 0 1
    db file scattered read 5 0 4
    db file scattered read 4 0 3
    db file scattered read 4 0 1
    db file scattered read 10,487 0 1
    db file scattered read 2 0 1
    db file scattered read 3 0 1
    db file scattered read 2 0 1
    db file scattered read 3 0 1
    db file scattered read 13 0 2
    db file scattered read 17 0 1
    EVENT TOTAL_WAITS TOTAL_TIMEOUTS AVERAGE_WAIT
    db file scattered read 2 0 1
    db file scattered read 3 0 1
    db file parallel read 32 0 1
    db file parallel read 1 0 2
    db file parallel read 29 0 2
    db file parallel read 38 0 1
    db file parallel read 24 0 2
    db file parallel read 52 0 1
    db file parallel read 33 0 1
    undo segment extension 9 9 2
    76 rows selected.
    Queue Section
    average wait for queues should be near zero ...
    PADDR Queue type # queued WAIT TOTALQ AVG WAIT
    00 COMMON 0 3195556 10,273,816 .311038858
    1DCB67CC DISPATCHER 0 14654 10,649,458 .001376032
    2 rows selected.
    Multi-threaded Server Section
    If the following number is > 1
    then increase MTS_MAX_SERVERS parm in init.ora
    Avg wait per request queue
    .311037586853935493365783330857794608413 hundredths of seconds
    1 row selected.
    If the following number increases, consider adding dispatcher processes
    Avg wait per response queue
    .001376211356617059142626710087687462551 hundredths of seconds
    =========================
    DISPATCHER USAGE
    =========================
    (If Time Busy > 50, then change
    MTS_MAX_DISPATCHERS in init.ora)
    NAME STATUS IDLE BUSY Time Busy
    D000 WAIT 3,506,156 89,948 2.501
    Shared Server Processes
    0
    high-water mark for the multi-threaded server
    MAXIMUM_CONNECTIONS MAXIMUM_SESSIONS SERVERS_STARTED SERVERS_TERMINATED
    SERVERS_HIGHWATER
    157 157 1721 1721
    17
    file i/o should be evenly distributed across drives.
    # Name STATUS BYTES PHYRDS PHYWRTS
    1 F:\ORACLE\ORADATA\DB_LIVE\SYST SYSTEM 262,144,000 16239 735
    2 F:\ORACLE\ORADATA\DB_LIVE\UNDO ONLINE 2,222,981,120 1962 191422
    3 F:\ORACLE\ORADATA\DB_LIVE\CONQ ONLINE 17,179,860,992 2361254 111110
    4 F:\ORACLE\ORADATA\DB_LIVE\INDX ONLINE 26,214,400 20 18
    5 F:\ORACLE\ORADATA\DB_LIVE\SUMM ONLINE 162,529,280 303 60
    6 F:\ORACLE\ORADATA\DB_LIVE\TOOL ONLINE 10,485,760 20 18
    7 F:\ORACLE\ORADATA\DB_LIVE\USER ONLINE 26,214,400 20 18
    8 F:\ORACLE\ORADATA\DB_LIVE\CONQ ONLINE 1,263,534,080 2254864 123356
    SYSTEM_STATISTIC VALUE
    CPU used by this session 639,861
    CPU used when call started 639,807
    CR blocks created 27,293
    Cached Commit SCN referenced 0
    Commit SCN cached 0
    DBWR buffers scanned 1,494,581
    DBWR checkpoint buffers written 240,048
    DBWR checkpoints 18
    DBWR cross instance writes 0
    DBWR free buffers found 1,319,309
    DBWR fusion writes 0
    SYSTEM_STATISTIC VALUE
    DBWR lru scans 1,210
    DBWR make free requests 1,210
    DBWR revisited being-written buffer 0
    DBWR summed scan depth 1,494,581
    DBWR transaction table writes 271
    DBWR undo block writes 191,098
    DDL statements parallelized 0
    DFO trees parallelized 0
    DML statements parallelized 0
    OTC commit optimization attempts 0
    OTC commit optimization failure - setup 0
    SYSTEM_STATISTIC VALUE
    OTC commit optimization hits 0
    PX local messages recv'd 0
    PX local messages sent 0
    PX remote messages recv'd 0
    PX remote messages sent 0
    Parallel operations downgraded 1 to 25 pct 0
    Parallel operations downgraded 25 to 50 pct 0
    Parallel operations downgraded 50 to 75 pct 0
    Parallel operations downgraded 75 to 99 pct 0
    Parallel operations downgraded to serial 0
    Parallel operations not downgraded 0
    SYSTEM_STATISTIC VALUE
    RowCR - row contention 0
    RowCR attempts 0
    RowCR hits 0
    SQL*Net roundtrips to/from client 20,533,267
    SQL*Net roundtrips to/from dblink 0
    Unnecesary process cleanup for SCN batching 0
    active txn count during cleanout 82,931
    background checkpoints completed 17
    background checkpoints started 18
    background timeouts 42,216
    branch node splits 222
    SYSTEM_STATISTIC VALUE
    buffer is not pinned count 58,473,081
    buffer is pinned count 58,622,335
    bytes received via SQL*Net from client 690,006,487
    bytes received via SQL*Net from dblink 0
    bytes sent via SQL*Net to client 102,210,355,400
    bytes sent via SQL*Net to dblink 0
    calls to get snapshot scn: kcmgss 8,092,887
    calls to kcmgas 130,839
    calls to kcmgcs 87,223
    calls to kcmgrs 0
    change write time 16,834
    SYSTEM_STATISTIC VALUE
    cleanout - number of ktugct calls 91,022
    cleanouts and rollbacks - consistent read gets 15,130
    cleanouts only - consistent read gets 16,490
    cluster key scan block gets 126,689
    cluster key scans 74,722
    cold recycle reads 0
    commit cleanout failures: block lost 708
    commit cleanout failures: buffer being written 59
    commit cleanout failures: callback failure 49
    commit cleanout failures: cannot pin 0
    commit cleanout failures: hot backup in progress 0
    SYSTEM_STATISTIC VALUE
    commit cleanout failures: write disabled 0
    commit cleanouts 488,120
    commit cleanouts successfully completed 487,304
    commit txn count during cleanout 36,303
    consistent changes 155,131
    consistent gets 74,645,555
    consistent gets - examination 16,776,826
    current blocks converted for CR 4
    cursor authentications 55,278
    data blocks consistent reads - undo records applied 154,868
    db block changes 12,976,485
    SYSTEM_STATISTIC VALUE
    db block gets 14,531,153
    deferred (CURRENT) block cleanout applications 137,895
    deferred CUR cleanouts (index blocks) 0
    dirty buffers inspected 9,671
    enqueue conversions 11,684
    enqueue deadlocks 0
    enqueue releases 184,564
    enqueue requests 184,686
    enqueue timeouts 94
    enqueue waits 1
    exchange deadlocks 0
    SYSTEM_STATISTIC VALUE
    execute count 7,319,198
    free buffer inspected 10,181
    free buffer requested 19,253,045
    gcs messages sent 0
    ges messages sent 0
    global cache blocks corrupt 0
    global cache blocks lost 0
    global cache claim blocks lost 0
    global cache convert time 0
    global cache convert timeouts 0
    global cache converts 0
    SYSTEM_STATISTIC VALUE
    global cache cr block build time 0
    global cache cr block flush time 0
    global cache cr block receive time 0
    global cache cr block send time 0
    global cache cr blocks received 0
    global cache cr blocks served 0
    global cache current block flush time 0
    global cache current block pin time 0
    global cache current block receive time 0
    global cache current block send time 0
    global cache current blocks received 0
    SYSTEM_STATISTIC VALUE
    global cache current blocks served 0
    global cache defers 0
    global cache freelist waits 0
    global cache get time 0
    global cache gets 0
    global cache prepare failures 0
    global cache skip prepare failures 0
    global lock async converts 0
    global lock async gets 0
    global lock convert time 0
    global lock get time 0
    SYSTEM_STATISTIC VALUE
    global lock releases 0
    global lock sync converts 0
    global lock sync gets 0
    hot buffers moved to head of LRU 1,334,001
    immediate (CR) block cleanout applications 31,620
    immediate (CURRENT) block cleanout applications 256,895
    immediate CR cleanouts (index blocks) 0
    index fast full scans (direct read) 0
    index fast full scans (full) 6,363
    index fast full scans (rowid ranges) 0
    index fetch by key 7,199,288
    SYSTEM_STATISTIC VALUE
    index scans kdiixs1 2,173,768
    instance recovery database freeze count 0
    kcmccs called get current scn 0
    kcmgss read scn without going to GES 0
    kcmgss waited for batching 0
    leaf node 90-10 splits 137
    leaf node splits 20,302
    logons cumulative 2,347
    logons current 86
    messages received 60,379
    messages sent 60,378
    SYSTEM_STATISTIC VALUE
    native hash arithmetic execute 0
    native hash arithmetic fail 0
    next scns gotten without going to GES 0
    no buffer to keep pinned count 5
    no work - consistent read gets 55,487,127
    number of map misses 0
    number of map operations 0
    opened cursors cumulative 692,633
    opened cursors current 11,134
    opens of replaced files 0
    opens requiring cache replacement 0
    SYSTEM_STATISTIC VALUE
    parse count (failures) 35
    parse count (hard) 222,131
    parse count (total) 740,269
    parse time cpu 71,868
    parse time elapsed 79,481
    physical reads 20,026,636
    physical reads direct 1,052,614
    physical reads direct (lob) 0
    physical writes 1,557,017
    physical writes direct 1,130,421
    physical writes direct (lob) 0
    SYSTEM_STATISTIC VALUE
    physical writes non checkpoint 1,477,234
    pinned buffers inspected 344
    prefetch clients - 16k 0
    prefetch clients - 2k 0
    prefetch clients - 32k 0
    prefetch clients - 4k 0
    prefetch clients - 8k 0
    prefetch clients - default 223
    prefetch clients - keep 0
    prefetch clients - recycle 0
    prefetched blocks 14,445,041
    SYSTEM_STATISTIC VALUE
    prefetched blocks aged out before use 2,636
    process last non-idle time ################
    queries parallelized 0
    recovery array read time 0
    recovery array reads 0
    recovery blocks read 0
    recursive calls 1,911,332
    recursive cpu usage 4,012
    redo blocks written 3,597,536
    redo buffer allocation retries 337
    redo entries 6,634,895
    SYSTEM_STATISTIC VALUE
    redo log space requests 37
    redo log space wait time 284
    redo log switch interrupts 0
    redo ordering marks 3
    redo size 1,772,883,980
    redo synch time 6,781
    redo synch writes 27,527
    redo wastage 11,115,384
    redo write time 16,597
    redo writer latching time 5
    redo writes 51,171
    SYSTEM_STATISTIC VALUE
    remote instance undo block writes 0
    remote instance undo header writes 0
    rollback changes - undo records applied 88,835
    rollbacks only - consistent read gets 12,179
    rows fetched via callback 3,423,058
    serializable aborts 0
    session connect time ################
    session cursor cache count 0
    session cursor cache hits 0
    session logical reads 89,176,705
    session pga memory 35,556,660
    SYSTEM_STATISTIC VALUE
    session pga memory max 132,532,528
    session stored procedure space 0
    session uga memory 50,817,520
    session uga memory max 497,741,936
    shared hash latch upgrades - no wait 2,566,917
    shared hash latch upgrades - wait 32
    sorts (disk) 130
    sorts (memory) 196,268
    sorts (rows) 18,962,940
    summed dirty queue length 376,151
    switch current to new buffer 33,449
    SYSTEM_STATISTIC VALUE
    table fetch by rowid 39,128,298
    table fetch continued row 556,214
    table lookup prefetch client count 0
    table scan blocks gotten 32,208,464
    table scan rows gotten 2,455,389,745
    table scans (cache partitions) 0
    table scans (direct read) 0
    table scans (long tables) 3,754
    table scans (rowid ranges) 0
    table scans (short tables) 124,879
    total file opens 0
    SYSTEM_STATISTIC VALUE
    total number of slots 0
    transaction lock background get time 0
    transaction lock background gets 0
    transaction lock foreground requests 0
    transaction lock foreground wait time 0
    transaction rollbacks 366
    transaction tables consistent read rollbacks 1
    transaction tables consistent reads - undo records appl 260
    user calls 10,869,191
    user commits 27,014
    user rollbacks 411
    SYSTEM_STATISTIC VALUE
    workarea executions - multipass 36
    workarea executions - onepass 218
    workarea executions - optimal 131,726
    workarea memory allocated 888
    write clones created in background 1
    write clones created in foreground 48

  • Trouble Shooting Revisited.

    Trouble Shooting Revisited
    Ok We will start with loading Tiger and iChat version 3.0
    From Panther
    There are or were serveral Add-ons and applications avaiblable to Panther users of iChat that are not compatible with iChat 3.
    These following need to be deleted.
    iCAR - An Add-on that posts an Auto response Away message (produces a 1 fps result in a Video chat)
    Virex for Panther - An Anti Virus app avialable to @mac account users (Produces the 1 fsp problem)
    iChatUSBCam for Panther/iChat2.x - A Add-on utility for using iSight or USB cam with iChat2.x (Incompatible with Tiger/iChat 3)
    iProfile - An Add-on for producing a profile on the AIM server that ichat 2.x could not do (not proven to be a problem but now not needed).
    A clean install of Tiger (not Archive and Install) produces the best results.
    But any install should also check these Tiger settings.
    First, UPGRADE to 10.4.2 as this gets past many Connection issues that became apparent with the basic Tiger (10.4) and iChat 3.0 It updates iChat to version 3.0.1
    Check Settings
    Don't be complacent that you have not set anything different.
    There are several new things in Tiger that may trip you up.
    These are worth looking at:
    Mac Firewall. Now includes the ability to Block all UDP traffic in the Advanced button (System Preferences > Sharing >Firewall tab then the Advanced Button).
    Also can now open UDP protocol for ports where as the Panther one only did TCP (Check any old Panther settings you Added to the presets).
    The ports should be:
    <table border=1; cellpadding=5><Tr><td colspan=3; align=center>Tiger TCP and UDP Ports For Mac Firewall</td></tr><tr><td align=center>Method</td><td align=center>TCP Ports</td><td align=center>UDP Ports</td></Tr><tr><td>iChat over AIM</td><td>5190</td><td>5060, 5190, 5678, 16384-16403</td></tr><tr><td>Bonjou</td><td>5298</td><td>5297, 5298, 5353</td></tr><tr><td>Jabber</td><td>5220, 5222, 5223</td><td></td></tr><tr><td>All Ports</td><td>5190, 5220, 5222, 5223, 5298</td><td>5060, 5297, 5298, 5298, 5353, 5678, 16384-16403</td></tr></table>
    QuickTime. This has a change in the name of the Connection Speed tab to Streaming (System Preferences > QuickTime) Check this is set to be equal to your connection speed (the download one if this is faster).
    Date & Time. Not conclusively involved but worth eliminating. Set a Network Server and the correct Time Zone.
    Apple Remote Desktop. If this is active in System Preferences > Sharing > Services tab it causes problems for iChat.
    Next, test the actual speed you are getting from your ISP.
    http://www.dslreports.com/stest
    There is a table here of the speeds you need:
    http://docs.info.apple.com/article.html?artnum=301050
    The one you get linked to in the Help menu is wrong.
    Other Known Problems
    There are several other applications that iChat 3 does not seem to like.
    folding@home This is a application that uses spare processor time to help find protein chains for a University.
    PostgreSQL This is a data base application that can be reset to allow more processor time for iChat. See here http://www.murraywilliams.com/blog/archives/000046.html
    Lotus Notes Some people have reported problems with this.
    Make sure any Add-on Video cards or input PCI cards have up to date Firmware
    Thread on Miglia.
    IF you are still having problems I would do Routine Maintenance Tasks as laid out here.
    Lastly, some routers/modems are SIP aware and give different results in iChat 3 compared to iChat 2.
    This is due to the Operating System changing (like a new computer connecting to the modem) rather than iChat.
    See www.ralphjohnsuk.dsl.pipex.com/page4

    Trouble Shooting Revisited
    Ok We will start with loading Tiger and iChat version 3.0
    From Panther
    There are or were serveral Add-ons and applications avaiblable to Panther users of iChat that are not compatible with iChat 3.
    These following need to be deleted.
    iCAR - An Add-on that posts an Auto response Away message (produces a 1 fps result in a Video chat)
    Virex for Panther - An Anti Virus app avialable to @mac account users (Produces the 1 fsp problem)
    iChatUSBCam for Panther/iChat2.x - A Add-on utility for using iSight or USB cam with iChat2.x (Incompatible with Tiger/iChat 3)
    iProfile - An Add-on for producing a profile on the AIM server that ichat 2.x could not do (not proven to be a problem but now not needed).
    A clean install of Tiger (not Archive and Install) produces the best results.
    But any install should also check these Tiger settings.
    First, UPGRADE to 10.4.2 as this gets past many Connection issues that became apparent with the basic Tiger (10.4) and iChat 3.0 It updates iChat to version 3.0.1
    Check Settings
    Don't be complacent that you have not set anything different.
    There are several new things in Tiger that may trip you up.
    These are worth looking at:
    Mac Firewall. Now includes the ability to Block all UDP traffic in the Advanced button (System Preferences > Sharing >Firewall tab then the Advanced Button).
    Also can now open UDP protocol for ports where as the Panther one only did TCP (Check any old Panther settings you Added to the presets).
    The ports should be:
    Tiger TCP and UDP Ports For Mac FirewallUDP Ports for iChat over AIM:- 5060, 5190, 5678, 16384-16403
    TCP:- 5190 (this is an As well setting)
    Bonjour:_ 5297, 5298, 5353 on UDP
    TCP:- 5298 (This is an As well setting)
    Jabber:- 5220, 5222, 5223 TCP
    All Ports for TCP:- 5190, 5220, 5222, 5223, 5298
    For UDP:- 5060, 5297, 5298, 5298, 5353, 5678, 16384-16403
    QuickTime. This has a change in the name of the Connection Speed tab to Streaming (System Preferences > QuickTime) Check this is set to be equal to your connection speed (the download one if this is faster).
    Date & Time. Not conclusively involved but worth eliminating. Set a Network Server and the correct Time Zone.
    Apple Remote Desktop. If this is active in System Preferences > Sharing > Services tab it causes problems for iChat.
    Next, test the actual speed you are getting from your ISP.
    http://www.dslreports.com/stest
    There is a table here of the speeds you need:
    http://docs.info.apple.com/article.html?artnum=301050
    The one you get linked to in the Help menu is wrong.
    Other Known Problems
    There are several other applications that iChat 3 does not seem to like.
    folding@home This is a application that uses spare processor time to help find protein chains for a University.
    PostgreSQL This is a data base application that can be reset to allow more processor time for iChat. See here http://www.murraywilliams.com/blog/archives/000046.html
    Lotus Notes Some people have reported problems with this.
    Make sure any Add-on Video cards or input PCI cards have up to date Firmware
    Thread on Miglia.
    IF you are still having problems I would do Routine Maintenance Tasks as laid out here.
    Lastly, some routers/modems are SIP aware and give different results in iChat 3 compared to iChat 2.
    This is due to the Operating System changing (like a new computer connecting to the modem) rather than iChat.
    See www.ralphjohnsuk.dsl.pipex.com/page4

  • Continual errors in log since 10.5.5 upgrade

    I'm seeing the following in my error logs on an OD Master with no replicas:
    +9/18/08 9:42:03 PM org.openldap.slurpd[9448] No replicas in slapd.conf file "/etc/openldap/slapd.conf"!+
    +9/18/08 9:42:03 PM com.apple.launchd[1] (org.openldap.slurpd[9448]) Exited with exit code: 1+
    +9/18/08 9:42:03 PM com.apple.launchd[1] (org.openldap.slurpd) Throttling respawn: Will start in 10 seconds+
    +9/18/08 9:42:14 PM org.openldap.slurpd[9459] No replicas in slapd.conf file "/etc/openldap/slapd.conf"!+
    +9/18/08 9:42:14 PM com.apple.launchd[1] (org.openldap.slurpd[9459]) Exited with exit code: 1+
    +9/18/08 9:42:14 PM com.apple.launchd[1] (org.openldap.slurpd) Throttling respawn: Will start in 10 seconds+
    The cycle repeats every 11 seconds or so. This has only started since a 10.5.5 upgrade. Any ideas?

    I've revisited my setup, this is a production server for a small business so I don't get much opportunity to access it, to check that it is still configured as originally set up. The server is configured as master, it does not replicate with any other servers, though I did enable replication for a backup server some time ago this should not still be in place. Can anyone give me some pointers as to which config files I should look at to find potential replicas?

  • Library upgraded from 1.5 2.0 not fully functional?

    after installing 2.0 (prior to the 2.0.1 patch) i reset the library path to one of my old 1.5 libraries. restarted and it asked if i wanted to upgrade. i said sure and let it do its thing. when all was done and referenced images were tied back to their masters (had done some reorganization while still in 1.5 when i left Aperture for Lightroom). i started going through the library and revisiting some of the photos i hadn't seen in awhile. this was an old library that i was more testing 2.0 with since i had read all the horror stories about people losing full libraries.
    most of the functionality is available for my images in 2.0. i say most because i opened one of my images and decided to open the exposure a little and i knew that i could save the blown out bits that i knew would come in with the recovery slider BUT... the recovery slider was greyed out so was the black point slider. this is the same on all the images. all of the images are linked to their master RAW file referenced on an external drive.
    i do have some images that i loaded directly from card to AP 2.0 and they do have recovery and black point. thought this was a little strange. anyone else running into this? is there a way around it?

    Sure. You're using the old RAW conversion algorithm... 1.1 or 1.0. You can't use the new adjustments with these photos.
    Change the RAW conversion to 2.0... it's in the top box under RAW conversion settings. You can bulk convert images with the "migrate" command -- be aware this may substantially change how the images look as it's a totally different RAW pipeline. But once you've done that, the new adjustments will be available.

  • When to upgrade an IOS

    I have two 6509's each with an RSM. The RSM is running IOS 12.1, 121-2.E to be exact. The supervisor (Sup1a) is running version 6.1(4).
    Should these be upgraded as a matter of course, or, are they fine as is ?

    For any network infrastructure, one should baseline and periodically evaluate the running software. Consistency across like platforms and being on a supported current release are two good criterion one should meet (besides the obvious of having a release that meets your needs). Any inconsistency should be for validated reasons that are documented and revisited at the next review cycle.
    New releases include not just bug fixes, but also features (the whole purpose of Cisco "T" (technology) train software releases).
    One other thing to consider in the specific situation you describe is the possibility of moving off of hybrid (CatOS on the Sup + IOS on the MSFC) to a native IOS image. Many folks find the native integration of the switchs layer 2 and layer 3 functionality to be a more intuitive configuration.

  • Firewire is gone after upgrading!

    I updated OSX Panther on my Powermac G5 to Tiger today and after that I upgraded FCP4.5 to FCP5. But now FCP can't play back any video through firewire and iTunes doesn't recognize my iPod (an oldie with firewire). I tried everything in FCP but it doesn't 'see' my camera connected with Firewire.
    Any thoughts anyone?
    Thanks!

    Hi juiceNL, and a Warm Welcome to the Power Mac G5 Forum! and the Final Cut Pro & Final Cut Pro HD Forum! and the Mac OS X v10.4 Tiger Forum!
    Unless you get a better answer elsewhere, you could try a firewire reset -
    from Mike Mihalik, LaCie
    "Seems like the FireWire issue needs to be revisited quite often. Here is my often repeated suggestion which appears to clear up many FireWire issues: reset the FireWire ports. Panther has a Finder Preference to show mounted volumes on the Desktop. You must set this for mounted drives to be visible. Please follow these instructions to reset your FireWire port.
    http://docs.info.apple.com/article.html?artnum=88338
    Here is a summary:
    * shut down and disconnect all external drives and peripherals ; make sure nothing is connected to the FireWire ports
    * use Apple Disk Utility to repair permissions on your internal boot drive
    * shut down and disconnect the AC power from the computer as well as the drives; if laptop, also remove battery
    * let sit unpowered and unconnected for 15 minutes
    * reconnect AC power to only the computer (battery too if laptop)
    * restart computer
    * verify that FireWire ports are visible within Apple System Profiler
    * reconnect FireWire drive (only one); refresh window within Apple System Profiler to rescan the FireWire bus; confirm that drive is visible
    * confirm drive is OK by using Apple Disk Utility and apply First Aid
    * repeat for other drives, one at a time"

  • My WD elements external hard drive has slowed down so much since upgrading - PLEASE HELP ME!!!

    I am in external hard drive **** - someone please help!
    I use my external hard drive as my music drive, and since upgrading to mountain lion something has gone wrong, and I have no idea what.
    Basically it is incredibly slow at everything - appearing in finder, showing its contents, and copying from or to it. This is a problem that has only happened since my upgrade. I have tried to verify and repair it, but each time this happens it simply tells me every thing is OK! The only message I get is
    'Updating boot support partitions as required.'
    But this happens each time! I have no idea what this means (i am happy in my ignorance about computers most of the time)
    I dont think that there is a problem with my hard drive, because I have seen the speed of my USB memory stick reduce in this time too, and if I leave it connected for long enough, it eventually finds all my files and folders and I can use them just fine. Its as if my USB ports speeds have all degraded very fast, for no particular reason. It has to be something to do with mountain lion...
    Anyway, any ideas guys and gals? Please help me!

    Basically I thought that mackeeper would keep everything nice and clean...
    That's what the con-artist developer wants you to think, and it's the exact opposite of the truth.
    How to maintain a Mac
    1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
    2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
    3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
    The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
    As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.
    The free anti-malware application ClamXav is not crap, and although it’s not routinely needed, it may be useful in some environments, such as a mixed Mac-Windows enterprise network.
    4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
    There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
    Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
    Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most users don't.
    5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Mac notebooks that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
    Use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
    6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” “running periodic scripts,” “deleting log files,” “scanning for viruses,” or “repairing permissions.” Such measures are for solving problems as they arise, not for maintenance.
    The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

  • Upgrading from 10.3 on my iBook G4 800mhz

    Hi all,
    I would like to be able to use Flash 10 on my iBook, so I need to upgrade to 10.4 or 10.5. I'm having trouble getting either installed from the disks I have.
    I have a 10.5 retail install disk, but it refuses to install on the iBook (it's apparently 67 mhz too slow).
    I also have a set of Mac mini system install disks with 10.4 on them. (I bought a mini with 10.4 on it, then got a 10.5 upgrade for it.)
    When I boot the iBook from the mini install disks, I get a kernel panic ("Can't find <something> for Powerbook6,3"). Not really surprising.
    The next thing I tried was to put the iBook in disk target mode and hook it up to the mini via FireWire. It shows up on the desktop just fine. However, the 10.4 installer says it can't install the OS to that drive. It doesn't say why, it just shows a stop sign badge on the iBook's drive.
    I guess I have a couple of questions.
    1) Can anyone come up with some suggestions for getting either 10.4 or 10.5 installed on the iBook G4 with this setup? I also have a 30 gig iPod with Firewire and an external Firewire 250gb drive that might be helpful. There's also a 500gb USB drive on the mini which I use for Time Machine, but it doesn't work on the iBook (the iBook thinks it isn't formatted).
    2) Are there any licensing issues? I know I shouldn't run 10.5 on the iBook without a second copy of the software, but what about the 10.4 software? I'm not running a copy of that on any machines anywhere, so it seems like I should be able to legally put it on the iBook. Can anyone confirm or deny?
    Thanks,
    Doug

    Information about singular models among the iBook and other Macs
    available in MacTracker as a free downloadable database, shows
    the different processor and bus speeds, supported OSX versions and
    details on what kinds of optical drives were available for each series
    run. These were often package or configuration dependent options.
    MacTracker: http://mactracker.ca
    So, not having a Combo or Superdrive in an early iBook may limit
    the ability for it to have Tiger 10.4.11 or Leopard 10.5.x installed.
    Limited availability of Tiger 4-CD installer sets as part of Apple's
    exchange program keeps some demand on the few out there high;
    but a bootable FireWire optical superdrive could be used to install.
    This would require a full retail installer; not a machine specific one.
    And some machines which shipped with a Combo drive, but did not
    have their original OS on DVD won't boot from OS X installer DVDs.
    This is a limited occurrence, but I have found it to be true in some.
    Or the later system may require a superdrive to burn featured content
    to DVD media, such as some iLife & other apps need to for support.
    Another issue, a machine specific installer is a limited version of the
    OSX in question and can't adaptively put the correct parts into another
    computer series or model than the one it was intended for.
    Depending on the iBook's specifications, and those of the Mac Mini,
    you could use an optical DVD drive to put a correct full retail install
    of Tiger on the iBook, that has been documented online, where a
    PPC machine has been able to install to a FireWire TDM PPC from
    a PPC, by using correct full retail install discs. Not machine-specific.
    Some of the hack-type of blogs and web sites out there have noted
    some workarounds where the appropriate software installers were
    used and correctly among suitable hardware configurations; many
    of these kinds of articles would be fairly old, unless revisited by new
    questions by those attempting these same steps three years later.
    In any event...
    Good luck & happy computing!

Maybe you are looking for

  • HT5114 How do you change the Apple ID that is already hooked up to the iCloud?

    My family got all new iPhones for Christmas and I got one last year so I am keeping mine. We have a plan for iCloud that we all share the same data. But we found out that if you have multiple Apple ID's then everyone will have their own iCloud. But t

  • My mac pro early 2009 keeps restarting with an unknown error

    CPU will start up and stay in log-in mode with no issues. Once you log in the CPU will stay on for a few minutes and then restart itself for no apparent reason.

  • Navigation button not working

    I can enter my SIM card pin to unlcok the phone and that is as far as I can go. The centre navigation button is not working, can't browse the phone, can't access any apps, bbm sms or any emails. Any suggestions?

  • Reading EAN128 Barcodes

    I'm trying to read barcode from some LTxx or LM (rf) transaction. That barcode has the EAN application identifyer 10 (batch) plus the batch number: (10)1234123412. I did setup in SPRO>Logist.Exec>Mobile data Entry>Barcode> Assign barcode types to WH,

  • Deleting pictures from iPhone/iPhoto

    I'd like to permanently delete pictures from my iPhone and iPhoto with one operation. Is there any way to do that? Thanks