Upgrade patch from 12.1.1 to 12.1.3

Hi,
Could you please help me, I have R12.1.1 on my OEL 5 on VM and I want to upgrade to R12.1.3. What is the patch required for this upgrade?
Regards
Muhammad Nehas

Could you please help me, I have R12.1.1 on my OEL 5 on VM and I want to upgrade to R12.1.3. What is the patch required for this upgrade?Oracle E-Business Suite Release 12.1.3 Now Available
http://blogs.oracle.com/stevenChan/2010/08/ebs_1213_available.html
Oracle E-Business Suite Release 12.1.3 Readme (Note 1080973.1)
Thanks,
Hussein

Similar Messages

Upgrade patches from OWB 10.2.0.1 to OWB 11.2.0.3

We are upgrading from OWB 10.2.0.1 to OWB 11.2.0.3
We have upgraded database from 10.2.0.1 to 11.2.0.3
What are the patches that needs to be applied before upgrading the repository?
What are the patches that needs to be applied after upgrading repository?

follow this link
http://www.orafaq.com/forum/t/119954/2/
http://wiki.oracle.com/search/threads/10.2.0.1?contains=10.2.0.1
http://www.oraclealchemist.com/oracle/patching-from-10201-to-10203/
also i assume there is no RAC involved in your case.
Edited by: Darthvader-647181 on Dec 2, 2008 8:13 AM
Edited by: Darthvader-647181 on Dec 2, 2008 8:14 AM

Upgrade patch from Apex 1.6 to 2.2.1

Hi, we are trying to upgrade our Apex installation from 1.6 to 2.2.1. The database version is 10.1.0.3.0
The plan is to install 10g Rel2 database (upgrade to 10.2.0.2) and Apex 2.2.1 on another file system on the server (since we don't have a separate play area) and export the data from 1.6 and import it into the 2.2.1 installation.
Not sure what the gottchas with this plan are. I want to move away from 10.1.0.3.0 database b'coz there are no Oracle CPU patches for that version. Not sure if I should go with 10.1.0.3.0 database for now, get done with the Apex upgrade and then try to upgrade to 10.2 db at a later date or if I can go ahead and try it out with 10.2.0 database right now.
Any inputs are highly appreciated.
Thanks.

Hi:
have you got any response on this ? What's the reason you are planning to upgrade ? The reason I asking this question because I am hearing some security vulnerability with 1.6 which is fixed on 2.2.1.
Any feedback will be appreciated.
cheers

Trex patch upgrade issue from 44 to 50

Hello
I have successfully installed Trex version 7.00.44.00 on windows 2008 server and Now, when I am trying to upgrade patch from 44 to 50 gives the below error at DNS domain name parameter enter stage.
<<Reverse Lookup of address '64.-88.xxx.xxx failed>>>
I have hosts entries maintained correctly as below.Checked the following note but no success.Host is not registered in the domain but as a workgroup.Can please tell me what could be reason for this???
IPaddress hostname.mycomapny.com hostname
1512315 - "Reverse lookup of address <xxx.xxx.xxx.xxx> failed." error during upgrading TREX
Edited by: Khaiserkm on Jun 4, 2011 7:59 AM
Edited by: Khaiserkm on Jun 4, 2011 8:28 AM

Hi
Does anybody has any idea please let me know.Forward and reverse lookup is working fine.
I suspect whether 2008 supports patch 50 or not.any idea???

Need to upgrde db patch from 16.0.00.01 to 02

Hi All,
What are the steps to follow to upgrade patch from 16.0.00.01 to 16.0.00.02.
Regards,
Karthik.

Hello,
I'd say the main SAP Note you have to keep in mind here regarding updating the ASE in a Business Suite environment, is the one Victoria has mentioned above:
SAP Note 1982469 - SYB: Updating SAP ASE with saphostctrl / sapdbctrl
That Note includes links to all Notes related to the update subject (including the SAP Note 1590719 ).
The section "Download the software from the SAP Service Marketplace" point to the link and details how to check and get the latest ASE and DBCLIENT (which includes the ODBC and JDBC drivers) patches available.
Currently , for ASE 15.7:
ASE: Sybase ASE 15.7 FOR BUS. SUITE SP133
DBCLIENT: Sybase ASE 15.7 FOR BUS. SUITE DBCLIENT.SAR SP17 PL0
For ASE 16.0:
ASE: Patch PL01 for ASEBS160 SP01
DBCLIENT: ASEBC1600002 (SP01 PL02)
HTH
Cris

Upgrade Oracle patch from 10.2.0.2 to 10.2.0.4 but 3 Instance on 1 server .

Dear all ,
AIX , Oracle , ECC6.0 and SAP Netweaver 7.0 .
we have 3 instances are Installed on same server .
SAP DEV , SAP QA , BIW-DEV .
Seperate Oracle home and SID .
I required to apply Oracle patch to all 3 Instance .
I have already Upgraded Oracle patch from 10.2.0.2 to 10.2.0.4 in my Sand Box server (Windows) .
Kindl y suggest how to upgrade Oracle patch to all the Instance .
or i have to upgrade oracle patch to one by one instance .
Is there any precaution ...
Regards

Dear Mitra,
Yesterday i have tried to upgrade Oracle patch on DEV server , i got error ,
Pls check the below ,
SAPDEVQA:oraird 7> ls -l
total 3592
-rwxrwxrwx    1 oraird   dba         1626654 Aug 01 18:07 10204_buglist.htm
drwxrwxrwx    4 oraird   dba            4096 Aug 01 18:07 install
-rwxrwxrwx    1 oraird   dba          195843 Aug 01 18:07 patch_note.htm
drwxrwxrwx    2 oraird   dba             256 Aug 01 18:07 response
-rwxrwxrwx    1 oraird   dba            3495 Aug 01 18:07 runInstaller
drwxrwxrwx   12 oraird   dba            4096 Aug 01 18:25 stage
SAPDEVQA:oraird 8> ./runInstaller
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should execute '/usr/sbin/slibclean' on all the nodes before
you proceed with Patchset Installation.
Answer 'y' if root has run '/usr/sbin/slibclean' so you can proceed with Oracle
Patchset installation.
Answer 'n' to abort installation and then ask root to run '/usr/sbin/slibclean'.
Has '/usr/sbin/slibclean' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5200, 5300 or 6100
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-08-18_11-42-54AM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                      % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:         $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
        echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
        echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
        % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/bin/X11/xclock
SAPDEVQA:oraird 9>
Dear Mitra ,
I can resolve the xclock issue ... no problem ..........
but my doubt was Ora log was storing tmp directory ....... Kindly advise .......
Regards
Sathies

How to upgrade eSourcing from version 5.1.8 Patch 3 to 5.1.8 Patch 4

Please some one can guide me How to upgrade eSourcing from version 5.1.8 Patch 3 to 5.1.8 Patch 4 since i am new in CLM.

Hello Gadewar,
First of all make sure you read all the details given in the Upgrade Guide located at "Installation and Upgrade Guide"->SAP SRM->SAP E-Sourcing 5.1/SAP CLM 2.0->E-Sourcing 5.1/CLM 2.0 Component Upgrade Guide PDF at service.sap.com/support website.
Note you need to have the support account to login to that website.
How ever I am listing down basic steps required for upgrade below.
1) Download the installables from the website I did mention above, have DB jar, have custom jar (optional).
2) Take backup of the DB.
3) Take backup of Config folder. Also take backup of the <home Dir>/Lib if you have some customizations in the form of JARS.
3) Make sure the userid which is used for connection to DB have the required permission like CONNECT, RESOURCE, UNLIMITED TABLESPACE etc. It is given in the guide I mentioned above in section 4.1 Verify Privileges of Oracle Service Account.
4) Stop ESO instance and run the setup and then upgrade scripts.
5) Undeploy the old ESO application from App server and then deploy new .EAR from new <home dir>/fsapp on the app server.
6) Start the app server and your ESO will be ready. You may need to use Workbooks to upload Localized Resources. This is the case if you have modified some OOTB localized resources in the past as a part of customization and have not used the overrides to give new resource values. If you have used overrides for localized resources in the past then you are good and need not to load the workbook.
Again usage of Workbook depends on the requirement to requirement. You may need to use workbook based upon your business needs.
Make sure you have not modified any OOTB query definitions as a part of customizations, if that is the case you will loose those query definitions as upgrade scripts overrides OOTB queries and then you should backup those as well before upgrade and then you may re-pull them after upgrade.
Regards,
Jagjeet Singh
Edited by: ESO123 on Feb 2, 2011 8:54 PM

Two Fundamental questions on UPGRADE/Patch

Question 1.
If i upgrade from 10.2.0.1.0 to 10.2.0.3.0, should i call this as an Upgrade or Patching?
Question 2.
If i upgrade(or patch) from 10.2.0.1.0 to 10.2.0.3.0, can i reverse theses changes and go back to 10.2.0.1.0?

james_p wrote:
You cannot downgrade the instance/databaseThanks Maran. But according to the following link (which Ying has suggested) 10gR2 can be downgraded back to 9.2.0.6.0
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/downgrade.htm#i1010243
Just for clarification: You can only downgrade your database (without using a backup) if your COMPATIBLE setting is less than the default of "10.2". If it has been set to "10.2" there is no way of downgrading directly, then you need to restore from backup.
If the COMPATIBLE parameter is still e.g. "9.2" then you can follow the instructions and basically - after performing the described steps - open the same physical database using a 9.2 instance.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Upgrade IDSM2 from 4.1(5)S225 to 5,1 using application partition

can i upgrade an IDSM2 (WS-SVC-IDSM2-BUN)in a 6513 from 4.1(5)S225 to 5.1 by copying the 5.1 application partition to the sensor
[from the cisco userguide]
Chapter 10 Configuring the Sensor Using the CLI
Reimaging Appliances and Modules
Reimaging the IDSM-2
This section contains the following topics:
Catalyst Software, page 10-124
Cisco IOS Software, page 10-126
Catalyst Software
To reimage the application partition, follow these steps:
Step 1 Obtain the application partition file from Software Center on Cisco.com and copy
it to an FTP server.
Step 2 Log in to the switch CLI.
Step 3 Boot the IDSM-2 to the maintenance partition:
cat6k> (enable) reset module_number cf:1
Step 4 Log in to the maintenance partition CLI:
login: guest
Password: cisco
Step 5 Reimage the application partition:
[email protected]# upgrade ftp://user@ftp server IP/directory
path/image file
Step 6 Specify the FTP server password.
After the application partition file has been downloaded, you are asked if you
want to proceed:
Upgrading will wipe out the contents on the hard disk. Do you want to
proceed installing it [y|n]:
Step 7 Type y to continue.
When the application partition file has been installed, you are returned to the
maintenance partition CLI.
Step 8 Exit the maintenance partition CLI and return to the switch CLI.
Step 9 Reboot the IDSM-2 to the application partition:
cat6k> (enable) reset module_number hdd:1
Step 10 When the IDSM-2 has rebooted, check the software version.
Step 11 Log in to the application partition CLI and initialize the IDSM-2.
See Initializing the Sensor, page 10-2, for the procedure.
IF NOT, THEN IS THERE A SHORT CUT FROM 4.1 to 5.1 ?

Just wanted to clarify some things.
As Scott has already confirmed you can re-image using the method described and following Scott's advice on what additional updates to install.
BUT understand that any configuration you have your 4.1 sensor will be lost during that method of re-imaging to 5.1.
Another alternative is to first upgrade from 4.1(5)S225 to 5.0(1), and then to upgrade to 5.1(1).
The upgrade to 5.0(1) will convert the 4.1 configuration into a compatible 5.0 format.
I saw another post you made implying that you had to downgrade back to 4.1(5)S189 to do the 5.0(1) upgrade. This is not the case. You can upgrade directly from your current 4.1(5)S225 to 5.0(1).
You can install the IPS-K9-maj-5.0-1-S149.rpm.pkg file directly on your current 4.1(5)S225 sensor.
When S225 was installed on your 4.1(5) sensor, it also placed in storage the corresponding S225 update for your 5.0 sensor.
So when IPS-K9-maj-5.0-1-S149.rpm.pkg is installed on the sensor it will detect that stored off S225 for 5.0 and install it at the same time.
So once installed you will be immediately at 5.0(1)S225.
Once at 5.0(1)S225, then you can upgrade directly to 5.1(1) using the IPS-K9-min-5.1-1d.pkg upgrade.
(NOTE: 5.1-1d file was created to fix some upgrade bugs, but still installs the same 5.1(1) files as the original 5.1(1) upgrade package).
So you will wind up at 5.1(1)S225.
Now at this point I would recommend installing at least one later signature update (S226 or higher in your case) BEFORE installing the 5.1(1p1) patch.
And AFTER the signature update, then install the 5.1(1p1) Engineering Patch (contact the TAC for this patch).
Because of this specific upgrade path, the best way to avoid some issues is to install at least one signature update before installing the 5.1(1p1) patch. The signature update helps to ensure the sensor is ready for the 5.1(1p1) upgrade. Some of the files needed for the 5.1(1p1) upgrade have been seen to not get carried forward properly in the upgrade from 5.0(1) to 5.1(1), but a signature update corrects those issues.
NOTE: This precaution of installing the signature update BEFORE the 5.1(1p1) is only needed when upgrading from 5.0(1) to 5.1(1). If imaging directly to 5.1(1) using the maintenance partition, then the 5.1(1p1) can be installed before a signature update without an issue.
Once 5.1(1p1) is up and running and monitoring packets and generating alarms, then additional signature updates can be installed afterwards.

There are some form errors after upgrading ebs from 12.1.1 to 12.1.3

Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan Ling

Hi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling

Error while upgrading Portal from 10.1.2 to 10.1.4

This is the error message I am getting when I try to upgrade portal from 10.1.2 to 10.1.4 by applying the patch.
NOTIFICATION:1 Framework: Error: Component upgrade failed PORTAL
NOTIFICATION:1 Framework: Error: PORTAL component version is: 10.1.2.0.2 INVALID.
Please let me know if any has has a solution?
==========================================
D:\Software\Oracle\IDM\as_windows_x86_portal_1014\mrua_051020\mrua>mrua.bat -ora
cle_home D:\Software_Installations\OraHome_Infra_01 -oid_host <hostname> -oid_ssl_port 636
Executing mrua.pl
Running on Windows
OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.0
Enter the password for SYS:
Enter the password for cn=orcladmin:
Enter the password for cn=orcladmin:
Upgrading the OracleAS Metadata Repository to release 10.1.4.0.0
Calling upgrade plugin for MRUA
Component has already been upgraded MRUA
Calling upgrade plugin for PORTAL
Error: Component upgrade failed PORTAL
Error: PORTAL component version is: 10.1.2.0.2 INVALID
Calling upgrade plugin for MRC
Component has already been upgraded MRC
FAILURE: Some OracleAS plug-ins report failure during upgrade.
Log file: D:\Software_Installations\OraHome_Infra_01\upgrade\logs\mrua2007-07-1
3_02-07-15PM.log
Finished mrua.pl

That didn't help for me....
I have those things shut down already and you can see below what I'm getting on the re-run:
-bash-3.00$ /app/oracleas/as1012portal/bin/emctl stop iasconsole
Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://asdev:1811/emd/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Application Server Control ...
Cannot determine Oracle Enterprise Manager 10g Application Server Control process; /app/oracleas/as1012portal/bin/emctl.pid does not exist.
Oracle Enterprise Manager 10g Application Server Control may not be running.
-bash-3.00$ /app/oracleas/as1012portal/opmn/bin/opmnctl stopall
opmnctl: opmn is not running
-bash-3.00$ mrua/mrua.sh -oracle_home /app/oracleas/as1014metadatarepository -oid_host asdev -oid_ssl_port 636
Executing mrua.pl
Running on UNIX
OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.0
Enter the password for SYS:
Enter the password for cn=orcladmin:
Upgrading the OracleAS Metadata Repository to release 10.1.4.0.0
Calling upgrade plugin for MRUA
Component has already been upgraded MRUA
Calling upgrade plugin for PORTAL
Error: Component upgrade failed PORTAL
Error: PORTAL component version is: 10.1.2.0.2 INVALID
Calling upgrade plugin for MRC
Component has already been upgraded MRC
FAILURE: Some OracleAS plug-ins report failure during upgrade.
Log file: /app/oracleas/as1014metadatarepository/upgrade/logs/mrua2007-10-23_00-42-55PM.log
Finished mrua.pl
-bash-3.00$ grep PORTAL /app/oracleas/as1014metadatarepository/upgrade/logs/mrua2007-10-23_00-42-55PM.log
2007/10/23 12:43:06.236 CST NOTIFICATION:1 Framework: Calling upgrade plugin for PORTAL
2007/10/23 12:43:28.203 CST NOTIFICATION:1 Framework: Error: Component upgrade failed PORTAL
2007/10/23 12:43:28.209 CST NOTIFICATION:1 Framework: Error: PORTAL component version is: 10.1.2.0.2 INVALID
There is another oracle instance we have, the one that is hosting the LDAP server, and after the above I also tried doing a stopall there, then bringing up only the ldap server which is required for the upgrade, and then shutting down the iasconsole for that instance too so that only the ldap server remained, then re-running the portal upgrade. It didn't help.
Any ideas?

9.0.2.6 Portal Repository Upgrade Patch problems.

We got some problem with Portal when tryed to apply
9.0.2.6 Upgrade. Could anybody give advice on this issue:
Initial configuration:
Solaris8, Portal 9.0.2.2.14, Oracle 9iAS R2 v.9.0.2.0, RDBMS 9.0.1.3. The infrastructure and midtier work on different SPARC-servers.
Accordingly upgrade procedure we succesfully applied:
a) Infrastructure: 9.0.1.4 Patchset for Oracle RDBMS server, 9.0.2.2 Patchset for OID, Oracle 9iAS SSO-server
migration to 9.0.2.5, 9.0.2.2 Patchset for 9iAS Core.
b) 9.0.1.4 Patchset for Oracle RDBMS server, 9.0.2.2 Patchset for OID, Oracle 9iAS SSO-server migration to 9.0.2.5, 9.0.2.2 Patchset for 9iAS Core, Portal 9.0.2.6
patch.
After this we needed to make just one last step:
Portal 9.0.2.6 Repository Upgrade Patch (2981297) for
changing Portal's repository schemes. It worked but
like a result we got the next errors after patch upgrade
was done:
a) "The following invalid non-Portal objects exist in the Portal Schema: INDEX ABC (the name of portal object), PACKAGE BODY WWMON_REP_REPOSITORY, PACKAGE BODY WWMON_REP_REPOSIT_DTL, PLS-00103: Encountered the symbol "," when expecting one of the following: (-+case mod not null <an identifier>,...) The symbol "null" was substituted for "," to continue.)" See upgtmp/nonportal.log
b) "ERROR: 1 invalid objects remain; ERROR: Failed while updating the new portlet IDS..."
c) "ERROR: ORA-01407: cannot update ("PORTAL"."WWSBR_URL$"."URL") to NULL.
d) Two package body of packages at PORTAL scheme became invalid: WWMON_REP_REPOSITORY, WWMON_REP_REPOSIT_DTL. About 20 package body of packages at PORTAL_DEMO became invalid (It seems like initial portlet ID's disappeared
and except of pportlet_id there is nothing:
Example:
inital statement at body:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
PORTAL.wwpro_api_invalidation.invalidate_cache(
p_provider_id => p_provider_id,
p_portletid => 1065753336,
p_instance_id => p_reference_path,
p_subscriber_id => PORTAL.wwctx_api.get_subscriber_id ,
p_user => PORTAL.wwctx_api.get_user);
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
after upgrade repository patch:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
PORTAL.wwpro_api_invalidation.invalidate_cache(
p_provider_id => p_provider_id,
p_portletid => ,
p_instance_id => p_reference_path,
p_subscriber_id => PORTAL.wwctx_api.get_subscriber_id ,
p_user => PORTAL.wwctx_api.get_user);
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Like a result after 9.0.2.6 Portal Repository Upgrade Patch application we lost the possibility to edit user's
profiles at Portal and other nesessary features. It seems
like some portlet ID's just dissapeared from Portal scheme. Could anybody had the same problem with Portal Upgrade 9.0.2.6? Quite possible that we missed some important element at during upgrade but ,really, we didn't wait so unlucky result. Advice something, please...
Regards. Igor.

Igor,
Since you've encountered undocumented errors, your repository upgrade has failed. You'll want to leave the repository as is for troublshooting, if at all possible, and log a TAR with support if you haven't already. They'll ask you to upload your upgrade log file and your upgrade tmp directory.
Regards

The mis-mapping problem when upgrading OWB from 11.1 to 11.2.0.2.

Hi all,
Our OWB ETL program was developed initially on OWB 11.1 platform.
Then after upgrading it from 11.1 to 11.2.0.2, several mappings are mismatched in the deployment PL/SQL package as below:
CREATE OR REPLACE PACKAGE BODY "MAP_PRODUCT_LIFE_CRT" AS
CURSOR "T_T_PRODUCT_LIFE_c" IS
SELECT
/* T_PRODUCT_LIFE.T_T_PRODUCT_LIFE.INOUTGRP1 */
"T_T_PRODUCT_LIFE"."INS_TYPE" "ORGAN_ID$1",
"T_T_PRODUCT_LIFE"."START_DATE" "HOSPITAL_TYPE$1",
"T_T_PRODUCT_LIFE"."END_DATE" "UNIT_FLAG$1",
"T_T_PRODUCT_LIFE"."LIFE_RATE" "INS_TYPE",
You can see that the field mapping is wrong! We have about 100 mappings, but only some of them go wrong.
We have tried the Metadata Loader and Repository Assistant for the upgrading, but the results are the same.
We have released all OWB patches on 11.2.0.2, but the results are the same.
Please help on it!

Hi David,
Besides the mega patch 10185523, we also have applied other tens of patches, e.g. 10225308, 11671955, 11705023, 1768535, etc.
Now we find that the wrong field mapping just appears in the row-based part of the mapping package. So if the set-based mode works well for the mapping execution, no error will happen. That's why we just found the problems in several mappings.
And one thing is even worse. In the patched OWB 11.2.0.2 env., we tried creating totally new mapping. The result is the same: the wrong field mapping still appears in the row-based part of the mapping package.
So this problem seems not related to the upgrading.
Regards.

Failing BPEL,ESB upgrade scripts from 10.1.3.1 to 10.1.3.4

Hi All,
I happened to upgrade 10.1.3.1. to 10.1.3.4 and have applied upgrade scripts at
soa_10134patch\Disk1\install\soa_schema_upgrade\bpel\scripts\upgrade_10131_10134_oracle.sql
I see 'table does not exist ' message for all instructions in the script file.
When trying to creating new domain in BPEL , coming across the error that BPEL schema has not been upgraded.
Kinldy let me know the procedure how to apply the upgrade patches..
I have logged in f:> sqlplus "orabpel\orabpel as sysadmin" and executed the script.
Database is Oracle XE 10g
Edited by: user8285104 on May 9, 2009 9:49 AM

you just use sqlplus orabple/orabpel, there is not need for the as sysadmin.
It is fast (seconds) but you should see lots of SQL statements being applied.
This script actually call 2 other scripts which may be an issue when running on windows as if you login to SQLPlus from a command prompt and the directory you are in is c:\ and the scripts are on f:\ then windows has trouble changing drives. This has caught me out many times.
You can look at this file and call the 2 scripts individually.
cheers
James

Upgrade database from 10.0.2 to 11.2.0.2 .

I want to upgrade database from 10.0.2 to 11.2.0.2 . Can i go for direct upgrade?
Or i need to apply the patch bring the database to 10.2.0.2 and then upgrade to 11.2.0.2.
Please suggest me on this ...

Are you sure about that minor release number? Possibly 10.1? Release 10.2.0.2 is the minimum R2 version that can be upgraded directly to 11gR2, if its 10.1, that requires 10.1.0.5 or higher.
The upgrade forum may offer better help, see Database Upgrade

Upgrade patch from 12.1.1 to 12.1.3

Similar Messages

Maybe you are looking for