Upgrade path in the future for 10bit monitor(s).

I'm looking HW for my new PC and thats not the problem. Would like get a Quadro graphics card because i'm also updating the monitor later (HP ZR30w).But  GTX-680 has much moregpu power  for the same money.
So my question is. When i get the new monitor can i get a Quadro based graphics card for that 10 bit per color channel for that and have also the another cards GPU in use.
Which card Premiere would use?
Silly questions but bothers me.

Quadro 4000+ or wait for the new K4000+. There is no sense in having a GTX installed too and have it sitting idle in your PC. You should take it out.

Similar Messages

  • Can the flash storage hard drives in the brand new 15inch Macbook Pro Retina Display laptops (10.22.13) be upgraded/replaced in the future?

    Can the flash storage hard drives in the brand new Macbook Pro Retina Display laptops that were just released a few days ago (10.22.13) be upgraded/replaced in the future?  I will need more than the basic 256GB for sample libraries using music software, among other things, but currently larger flash drives from Apple are too expensive.  I ask because I'm in the process of buying one of the new 15inch Macbook Pro Retina Display laptops right now (or at least right after I get an answer to this question). 
    I saw in the Mac store when I started looking at the build options for ordering the Macbook Pro that under Memory it said the memory was built into the computer and therefore could not ever be replaced or upgraded in the future.  So I was wondering if something similiar might be the case with the flash storage drives even though the same wasn't written under the hard drive options?  If these flash drives can be replaced in the future then I would just purchase the starting 256GB drive and suffer through using connected external hard drives, as unwieldy as that would be, until there were potential replacement flash drives with larger storage capacties available on the market or through Apple for more reasonable prices.  But if the hard drives in these laptops can't be replaced/upgraded I would go for the 500GB drive option (even though paying an additional $300, before taxes, for just 244GBs more storage space is absolutely outrageous no matter how great flash drives are with their read/write speeds, no moving parts to break, and lighter weight/thinner builds allowing for an overall thinner laptop).  I would even go for the larger 1TB option, which is really what I need, except that costs an additional $700 which is more than enough to buy me a new 50inch, HD, flatscreen TV from a reputable brand if I were so inclined!  (And yes, I understand the youth of the technology, current limits to flash drive capacities, and the reason for the high prices.  I know I'm not getting bilked...)
    So yeah, does anybody have an answer to this question?  Can the flash hard drives in the new Macbook Pro Retina Display laptops, just released, be upgraded/replaced in the future?  Any answers are greatly appreciated and will save me some much needed cash on my purchase of one of these laptops!  And I should also ask, if so, can they be replaced by the laptop owner with the normal toolset through the normal, easily done methods of hard drive replacement in laptops that has been common, or would I have to bring the laptop to a Apple technician?
    Thanks everybody!

    The modules are proprietary. They are installed in a slot secured with a tiny screw.
    macsales.com has been working on providing aftermarket modules for the older models that were on the SATA Bus.
    These newer ones are likley directly on the PCIe Bus. That will take some time to develop.

  • Function module to get the file path in the system for TEMP folder

    Hi All,
    Is there any function module that I can use to get the file path in the system for TEMP folder.
    I mean, i am supposed to give only TEMP as the input for that function module and I need to get the path of that in the system as the output.
    I am unsing 4.0 version.
    Please advice.
    Regards
    Ramesh

    In Higher versions, we can use the below code:
    call method CL_GUI_FRONTEND_SERVICES=>ENVIRONMENT_GET_VARIABLE
        exporting
          VARIABLE   = 'TEMP'
        importing
          VALUE      = LV_TMP
        exceptions
          CNTL_ERROR = 1
          others     = 2.
      if SY-SUBRC <> 0.
        message id SY-MSGID type SY-MSGTY number SY-MSGNO
        with SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
      call method CL_GUI_CFW=>FLUSH
        exceptions
          CNTL_SYSTEM_ERROR = 1
          CNTL_ERROR        = 2
          others            = 3.
      if SY-SUBRC <> 0.
    Error handling
      endif.
      concatenate lv_tmp '\' into folder_path.
    But need to know in the lower versions like 3.1h and 4.0,

  • What is the path in the filesystem for the deployed Wendynpro application .

    What is the path in the filesystem for the deployed Wendynpro application in the WAB AS
    We have a different version of webdynpro application running in production and non production , what is the process for overwriting the deployed application from one enviorment to another.
    Please help..

    Hi,
    What is the path in the filesystem for the deployed Wendynpro application in the WAB AS
    If you search for your component under the /usr/<SID> folder
    We have a different version of webdynpro application running in production and non production , what is the process for overwriting the deployed application from one enviorment to another.
    If you have NWDI in place CTS would help in this, else you can deploy your application using sdm.
    in CE you can deploy the application from NWDS.
    Regards
    Ayyapparaj

  • Does Apple make a monitor that looks like the iMac27, for dual monitor setup?

    I'm thinking about buying an iMac, but I'm used to a multiple monitor setup. Does Apple make a monitor that looks like the iMac27, for dual monitor setup?

    Look at these links.
    http://store.apple.com/us/product/MC914LL/B/apple-thunderbolt-display-27-inch?fn ode=53
    http://store.apple.com/us/product/MC007LL/A/apple-led-cinema-display-(27%22-flat -panel)?fnode=53
    Allan

  • I have a CC for individuals membership on annual plan paid monthly. How do i upgrade this to the CC for teams plan so that I can add my first employee licence?

    I have a CC for individuals membership on annual plan paid monthly. How do i upgrade this to the CC for teams plan so that I can add my first employee licence?

    Hi Alexalloy,
    This should help. Cancel your membership or subscription | Creative Cloud
    Cheers!
    ~ Arpit

  • Are web/cloud-based dev and apps dist the future for LV?

    The direction of software companies such as Microsoft and Adobe is that they are no longer distributing media for standalone PCs.  (we all know that if we didn't need to dist the hefty LV RTE life would be a bit easier)
    You no longer purchase specific versions of their software instead you subcribe and login to have access to the latest versions from any location.
    Examples are Office 365 and Adobe Creative Cloud.  Presumably the subscription arrangement for them is more profitable.
    Will this (a) be the future for LV development environment; and (b) will this make it possible for developers to adopt similar strategies for distributing their own apps?
    Currently is this something that the webservices features of LV can deal with to some degree?  I understand this is limited to a small number of concurrent users at a time?  I also understand that web-based are not exactly the same as cloud-based applications.
    Is this something NI is not moving toward since LV has traditionally been tied to fixed hardware (i.e. data acquisition) applications?
    Anyway, I'd be interested in hearing people's opinions..

    I can't speak for NI's future plans.  But I don't think a move like this would benefit much of the LabVIEW community.  I'm sure there are some that would fine a clound or web based distribution system convinient but for me many of the system I install LabVIEW, TestStand, DAQmx, XNET, and many other NI tools are offline perminently.  These computers don't get future Windows updates, or NI updates unless I make an effort to put them on the network, or bring over DVDs and external drives with updates on them.
    So as for distributing NI applications I don't think this is a good move.  They already have a subscription based approach with things like the VLA, Enterprise solutions, and SSP.  Having the user go NI.com and download the tools you want has worked, and moving to a cloud application won't really work because NI users are quite diverse.  Office 365 works because if you use office, you use the same office.  But with LabVIEW there are so many 3rd party tools and libraries that the LabVIEW you use can be very different from the one I use.
    As for distributing your own built applications I think this would be neat, but again not right for me.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • What is the future for the enterprise server line from Apple?

    Hi.
    I work at a company that is looking at several choices for our services. We've had a Xserve G5 for quite a while and we've been very pleased with it. Although it hasn't been a smooth ride, there haven't been any major issues that have blocked the evaluation.
    However, now we are currently comming to an end of our evaluation period of different systems, and now we have to decide. The Xserve/MacOSX have it's advantages, but one issue that currently is a major questionmark is the future for the Apple enterprise line.
    I'd really apreciate feedback regarding what you think will be the future for Apple's enterprise line, will it die slowly or get a new boost with the Intel switch, as I've read that Steve has stated time upon time that Apple is not an enterprise based business. Is it worth investing in Xserve/Xraid hardware or should one steer clear of Apple and choose other enterprise platforms such as Sun products based on Solaris for example.
    Thx,
    /Mysteron

    Unfortunately, speculation pertaining Apple's future directions and unannounced products are forbidden here, as is discussion of their policies and procedures.
    Also, it's hard to really give you a solid answer without knowing more about your particular situation.

  • "Could not retrieve the settings for endpoint monitoring."

    So my VMs are hosed because suddenly Azure cannot retrieve the settings for endpoint monitoring.  If I try to start the VMs, it fails for this reason.  If I try to configure the VMs, it fails for this reason.  When I look at ENDPOINT MONITORING
    under CONFIGURE it constantly says "Loading..."  This all began when today I tried to switch a VM from STANDARD to BASIC configuration.  Now I can't start any VM.

    Once I powered off the VM there was no starting it again, even after switching back to STANDARD config.  Same "Could not retrieve the settings for endpoint monitoring" error every time.  I gave up, duplicated the disk, and created a
    new VM from scratch, which has no issue with endpoint monitoring.  Ridiculous that I had to do that.  Azure continues to be as brittle and unreliable as a drunk monkey.

  • When I upgraded my Mac Pro HDs I lost the capcity for 2 monitors.  One monitor works fine but the second one is not "seen" by the Mac Pro.  Help?

    My MacPro is a dual quad core 2.8 intell processor system with 6 gig of RAM and 4 HDs.  I recently upgraded the HDs from 500 gig each to 2 TB each.  I did that by copying each existing hard drive to a new hard drive and then inserting the new hard drive where the copied drive had been.  I followed all of the instructions for the OX system that came after copying and replacing the drive with the OX on it.  Unfortunately now I can no longer use the 2 monitors that I used to use on the system.  One monitor works fine, the second on is not found by the OX system and simply won't respond or receive a signal from the computer.  Any ideas?

    Have you tried a NVRAM / PRAM reset?
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Perpetual license upgrades in the future for Audition CS6 users?

    I notice that Adobe is now offering Photoshop CS6 users perpetual license upgrades withjout having to join the CC perpetual rental program.
    I wonder if Adobe will eventually do the same for us Audition CC6 users.
    Ray Edwards

    Unfortunately on re-reading I found the announcement read "update" (bug fixes), not upgrades. I guess I read what I wanted to see.
    http://blogs.adobe.com/photoshopdotcom/2013/11/photoshop-cs6-13-0-5mac-13-0-1-2win-perpetu al-license-updates-now-available.html
    Ray

  • What is the Future for MAEMO 5 Ahead ?

    Hello Everyone, Greetings from India !!
    I know for the fact that this forum is mostly for people who have already bought the N900 and who may have some technical queries about their product. But with the N900 just been launched in this part of the world, people here have just started to understand, explore and use it. So I am one person who is just about to, on the verge of buying the N900 but have some concerns...
    Maybe this question would have been discussed here a lot of time, but since I am new to this community, I thought I will try to know this from you guys. With Meego already been announced as Nokia's new OS for Tablets and smart phones. What is the Future left for MAEMO 5. Will there be no future support, Firmware updates for MAEMO as Nokia now, has decided to Abandon MAEMO. Will there be any Upgrade in Version for MAEMO. If some one like me who has liked the N900 in its current state also, but is worried about the MAEMO 5 Future in terms of version upgrade and firmware update. when compared to Android, which keeps coming out with improvised versions...Ver 1.6, 2.1 and now 2.2 slated to release... How should one look at this entire thing..
    Thanks in Advance. 

    Hi,
    I will be purchasing this handset next month too.
    My opinion is that due to the fast moving technology of this market new handsets,o.s and software will always be round the corner.
    To hold off to see whats round the corner would make you end up not getting anything new for fear of not getting the next new thing.
    The beauty of the n900 is that it wide open for software etc with someone always out there providing newly written stuff.
    My advice is to do your homework and read up on all the info , ends users views and if the fone/internet tablet still ticks all the boxes you need then buy it.
    Just remember its an internet tablet with making calls technology added on so it wont have all the usual options you would get on a standard handset.
    Perform a search on here and you will see lots of interesting threads what will answer most of your questions you could have with the n900.
    Nokia Lumia 520
     iphone 6 Plus.
    Be happy !!

  • 4.6C to ERP6.0 Upgrade - what are the recommendations for Unicode and Java

    Hi All,
    Forgive such a basic question.
    We are just beginning to look at our ERP6.0 upgrade and am unclear whether we should convert to unicode at the same time, and also what are the uses for the Java stack.
    Unicode?
    We are a single language Latin-1 site so don't need Unicode. However will it become mandatory eventually? Are we better, if we have the opportunity now, just to convert. Also I believe the Java stack is only Unicode. Does ASCII ABAP and Java Unicode complicate things?
    Java?
    Will we need it? We are proposing a technical upgrade from our 4.6c Javaless environment. Where does Java come in to play in ERP6.0? Doesn't it increase greatly the iSeries HW requirements? (I'm looking at a 2 way 550 at the moment)
    Look forward to hearing your views.
    Regards
    Steve

    Hi Stephen,
    at the moment, in a latin-1 environment Unicode is for old customers not a requrirement. This might change in 5-10 years ...
    Java: No problem at all with ASCII (in latin-1 environments)
    => there is no need for you, but you could go for it. We did several Unicode conversions already and these Latin-1 conversions are pretty easy and simple especially on iSeries, because of the special InPlace Unicode Conversion.
    ... but this can be done at any time ...
    Regards
    Volker Gueldenpfennig, consolut.gmbh
    http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

  • Advice on using Flash in the future for Android VS. Air VS. Web Development

    First, I am not trolling and I see that other similar questions have been asked recently, though I am looking for specific info to meet the needs of our program (that is why I am posting this now).
    We've been teaching Flash at a community college for many years. After Adobe stopped development of the Flash Player for browsers, I'm left wondering what the future of Flash in the web will be? Data shows that a majority of web browsing will take place from mobile devices over the next several years, and if you are not going to be able to view Flash web content in a browser from a mobile device, I am concerned about whether it makes sense to continue teaching Flash to students for web design/development. I know Flash can also be used for developing applications, Air, etc., and we do some of that currently, I'm just wondering how Adobe can expect developers to commit to the platform for web development without supporting mobile web browsers. Am I missing something? Do developers see this differently? I appreciate any insight from Flash developers or Adobe employees. FYI - I just did a similar analysis with our video editing program and asked similar questions in an Apple Final Cut Pro forum and we are moving away from Apple's Final Cut Pro after they changed direction with their latest release and we are now going to start teaching Adobe Premiere. Should we focus teaching Flash for Android and Air development and back off from using it for web development?
    Thanks in advance.

    I'd like an answer for this one too.  Thank you, "Media Kat" for posting the question.  I am a prototyper with a background in art and design, who has worked exclusively with Flash for nearly 13 years.  I'm currently working with AIR for Android, but my superiors and associates think AIR is going to die (along with the rest of Flash) and don't understand that simply "switching to HTML5" is not a very palatable answer.  It would be helpful to hear from someone "in the know" about the future of Flash.
    Thanks.
    P.S.  If someone from Adobe answers this, please don't BS me like they did at the last forum I attended at Adobe headquarters in San Jose.  We asked specifically if Flash and/oir Flex were dying and were assured that they had a long future... Three weeks before the announcement to kill it!  :-(

  • I hear that apps are the way to go in the future for launching web sites. Where do I go to find a good app writer? and How difficult is it to merge a website with an app application. My website will be written in microsoft.

    I hear that having an app for my future website is the way to go in the future. It will help to even the playing field for small business such as mine.THere will great ways to feel out the personal preferences of prospective clients. My site will be written in microsoft. It will have a blogg, store, database, and a community forum. What are the pros and cons to having an app. What are the possible expences to expect with building,launching, hosting and maintaining an app compared to advertising on a deskop. I hear PCC and SEO can often add up to over $5000 a month. Hosting will cost at least a couple thousand a year.
    ANy advice will be greatly appreciated.

    Sounds like you really do not understand what you are talking about.  Not trying to be judgemental, but nothing is written in "Microsoft" unless it's a Microsoft Operating System, application, or website.
    Microsoft is a company, not a programming language.
    I would also recommend you do some reasearch on HTML5 so that there is no need to create an app for each platform, but rather have a single site that will run on multiple platforms.
    Maybe look into contracting/hiring a good web designer.

Maybe you are looking for

  • Automatic excise invoice creation in STO scenario

    Hi All, This is related to stock transfer from Depot to manufacturing plant. I have done the replenishment delivery at Depot. Now my requirement is automatic excise invoice creation. For that i have done the required settings like excise and series g

  • AV cable from ipod touch to TV

    I have a 1st generation ipod touch with the version 2.2 software. When I use my AV cable connection to my TV and play a video or view photo's the images are always black & white, but the audio is fine. This is my second cable & the same thing happens

  • Java application communicate with java card applet without java card

    Can I write java application to communicate with java card applet without using java card? Can I send APDU to java card applet on computer(not install in java card)? If it's not, how can I write? Best Regard, Thanawan

  • Portal admin tasks / Portal Monitoring

    Hi, I am new for EPP, and I would like to know tasks list for Basis person at EPP level. If any idea please let me know. Also if possible please tell me performance & monitoring areas in EP. Regards RP

  • Cant lookup created queue

    I have a problem looking up queues that I'm creating with: com.sun.messaging.Queue myDQueue = new com.sun.messaging.Queue(); as per the documentation. I can see the nwly created queues in my message queue Admin Console but can find them again with :