Upgrade Prep CHECKSYSSTATS - "Dialog Queue info unavailable"

During the prep for migration I'm getting an error stating that the system seems to be in an unsound state.
This can be tested for by running sapcontrol as follows:
sapcontrol -nr 03 -function GetProcessList
28.04.2015 00:38:10
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
disp+work, Dispatcher, YELLOW, Running but Dialog Queue info unavailable, 2015 04 27 16:05:38, 8:32:32, 1273
igswd_mt, IGS Watchdog, GREEN, Running, 2015 04 27 16:05:38, 8:32:32, 1274
I have not seen any system issues, yet the sapcontrol program clearly is having issues.
I have tested this with both the source kernel (721_REL patch 400) and the target kernel from the SUM directory (742 kernel).
Both give the same error.
(NB I've tried the EXT version on the source level too - 721_REL_EXT)
There is some advise that you can just skip this warning (see 1957443 - Check for system status at upgrade preparation (phase CHECKSYSSTATUS)) - however I would prefer to know what is going on here.
I've also found a note suggesting that this could be something that happens when you remove a Java stack from a system (we just have); however it refers to J2EE status as opposed to Dialog queue info.. 1855360 - *ERROR:* Your system appears to be in an unsound state. Correct the following issues before you continue: ...J2EE status info unavailable
I'd be very keen to see if anyone else has seen similar issues with SUM during an upgrade.

Additionally all.
Please note I've seen for some people this can be a problem when sapstartsrv isn't up to date with the rest of the kernel (easily possible esp. if you didn't manually kill all SAP processes during kernel updates).
However I did kill these processes and the binaries all look aligned:
sapcontrol -nr 03 -function GetVersionInfo
28.04.2015 09:48:31
GetVersionInfo
OK
Filename, VersionInfo, Time
/usr/sap/<SID>/DVEBMGS03/exe/sapstartsrv, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 04:14:47), linuxx86_64, 2014 12 11 18:36:31
/usr/sap/<SID>/DVEBMGS03/exe/disp+work, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 00:03:44), linuxx86_64, 2014 12 11 18:26:54
/usr/sap/<SID>/DVEBMGS03/exe/gwrd, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 00:03:44), linuxx86_64, 2014 12 06 04:00:56
/usr/sap/<SID>/DVEBMGS03/exe/msg_server, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 04:14:47), linuxx86_64, 2014 12 06 05:08:17
/usr/sap/<SID>/DVEBMGS03/exe/dboraslib.so, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 00:03:44), linuxx86_64, 2014 12 05 23:32:49
/usr/sap/<SID>/DVEBMGS03/exe/dbmssslib.so, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 00:03:44), linuxx86_64, 2014 12 05 23:55:44
/usr/sap/<SID>/DVEBMGS03/exe/dbdb2slib.so, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 00:03:44), linuxx86_64, 2014 12 05 23:29:38
/usr/sap/<SID>/DVEBMGS03/exe/dbdb4slib.so, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 00:03:44), linuxx86_64, 2014 12 05 23:31:50
/usr/sap/<SID>/DVEBMGS03/exe/dbdb6slib.so, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 00:03:44), linuxx86_64, 2014 12 11 18:08:43
/usr/sap/<SID>/DVEBMGS03/exe/enserver, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 04:14:47), linuxx86_64, 2014 12 06 05:11:52
/usr/sap/<SID>/DVEBMGS03/exe/icman, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 04:14:47), linuxx86_64, 2014 12 06 05:05:12
/usr/sap/<SID>/DVEBMGS03/exe/sapwebdisp, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 04:14:47), linuxx86_64, 2014 12 06 05:05:52
/usr/sap/<SID>/DVEBMGS03/exe/jcontrol, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 04:14:47), linuxx86_64, 2014 12 06 05:27:04
/usr/sap/<SID>/DVEBMGS03/exe/jlaunch, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 04:14:47), linuxx86_64, 2014 12 06 05:27:13
/usr/sap/<SID>/DVEBMGS03/exe/jstart, 721, patch 400, changelist 1542873, opt (Dec  6 2014, 04:14:47), linuxx86_64, 2014 12 06 05:25:50

Similar Messages

  • Dialog Queue Info Unavailable

    Hi,
    I have  a system with NW2004s BI 7.0 installation
    I upgraded the SAP Kernel from 133 to 146.
    After i start SAP in SAP MMC, i see teh message : Dialog Queue info unavailable"  But the server is running on fine
    I have tried the following
    1. Copied the Latest dispatcher (157 patch), R3trans, tp to the kernel but  then the Dispatcher stops
    2. Restarted the machine
    Please let me the reason for this problem any other solutions for the same
    Edited by: Balaji Rajendran on Jun 16, 2008 9:26 PM

    Hi Balagi,
    Please refer the notes 396309 (Dispatcher remains yellow, although the system is running) and you can try by increase the value of rdisp/elem_per_queue=4000.
    If above two did not help then you need to apply the latest kernel, please refer to the note 19466 further information.
    Regards
    Seshu

  • Dispatcher  status: Running but dialog queue info unavailable ... yellow co

    Hi there,
    I just upgraded a SAP Kernel from:
    Old Kernel:  disp+work information
    kernel release                640
    kernel make variant           640_REL
    compiled on                   NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
    compiled for                  64 BIT
    compilation mode              Non-Unicode
    compile time                  Aug 16 2007 21:11:21
    update level                  0
    patch number                  196
    source id                     0.196
    New Kernel:    disp+work information
    kernel release                640
    kernel make variant           640_REL
    compiled on                   NT 5.2 3790 Service Pack 2 x86 MS VC++ 14.00 for "
    NTAMD64"
    compiled for                  64 BIT
    compilation mode              Non-Unicode
    compile time                  Oct 10 2010 21:35:45
    update level                  0
    patch number                  350
    source id                     0.350
    I downloaded the files:
    SAPEXE_347-20001176.SAR
    SAPEXEDB_347-20001172.SAR
    And I extracted them and copied all files to  ...usr\sap\SID\SYS\exe\run and to ...usr\sap\SID\SYS
    exe\nuc\NTAMD64
    But the Dispatcher has the yellow status with the message: Running but dialog queue info unavailable.
    Any Idea?
    Thanks in advance.
    HanseAtik

    Hi,
    I just found out that it works fine now and want to share this with you:
    The solution is:
    I downloaded and extracted the file: dw_350-20001176.sar and copied everything to exe\run and ..exe\nuc\NTADM64.
    I am happy now and evey thing is green and the business must go on. I hope this will help other too...
    Best regards
    Hanseatik

  • PI -Dispatcher - Running but Dialog Queue info unavailable

    Hi,
    In our PI dev server,
    1) We are observing the below warning..
    "Dispatcher - Running but Dialog Queue info unavailable"
    The dispatcher seems to running as well as the system is functioning properly.
    But sometimes we get Java heap size exceeding error. Also the Maintenence_ORA certificate has expired.
    2) Also we have observed the below error during cache refresh
    "Failed to read sld instance name"
    I went through some of the blogs and got to know that Kernel upgrade could be one of the solutions to point 1.
    But our PI server is already 7.1 EHP 1 and at patch level 135. (N-1 available in marketplace).
    Also let me know how relevant Maintenence_ORA certificate is ?
    Kindly suggest solutions for points 1 and 2.

    hi Prit,
    If your PI is a NT server you can read the note Note 72248 - NT: Dispatcher in status 'Yellow',SAP system running.
    kind regards.

  • Running but Dialog Queue info unavailable  - In MMC- CKernel 700 -  SuPK133

    Hi All
    I have reciently upgraded our ECC Kernel to the latest version (SP 133) and now in the SAP MMC the status is yellow and I am getting the following message:
    Running but Dialog Queue info unavailable
    HAs anyone seen this or know how to fix it?
    Thanks in advance
    Phil

    Sorted:
    See this [Dispatcher - Running but Dialog Queue info unavailable;

  • Running but Dialog Queue info unavailable, J2EE: All processes running

    Dear SAP,
    I have start my SAP Solution Manager system. I can login.
    But the process disp+work.exe is in warning (yellow).
    I do have this warning :
    Running but Dialog Queue info unavailable, J2EE: All processes running
    Content of my dev_disp file :
    ================================================================================================
    Thu Sep 09 12:36:13 2010
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4436]
    ERROR => NiIRead: SiRecv failed for hdl 7 / sock 1308
        (SI_ECONN_BROKEN/10054; I4; ST; 192.168.110.71:53609) [nixxi.cpp    4436]
    Network error of client T27, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T27 is 192.168.110.71(neo-l011.lia.local)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (28 BUEHLER 27 lia-l011 ) [dpxxdisp.c   12238]
    RM-T27, U28, 100     BUEHLER , lia-l011, 11:55:32, M1, W1, DSWP, 3/1
    Thu Sep 09 14:07:57 2010
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4436]
    ERROR => NiIRead: SiRecv failed for hdl 7 / sock 1308
        (SI_ECONN_BROKEN/10054; I4; ST; 192.168.110.71:55886) [nixxi.cpp    4436]
    Network error of client T31, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T31 is 192.168.110.71(neo-l011.lia.local)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (1967 31 lia-l011 ) [dpxxdisp.c   12238]
    RM-T31, U1967, 000             , lia-l011, 14:07:54, M0, W0, SESS, 2/0
    Thu Sep 09 16:47:41 2010
    DpHdlDeadWp: restart wp (pid=9220) automatically
    ================================================================================================
    Thanks
    Best regards
    NetAdmin

    Dear SAP,
    It was a kernel problem.
    Best regards

  • Dispatcher is running but dialog queue info unavailable

    R/S All,
    My production system has been recovered after a Windows O.S. crash. SAP application gets started & we are able to
    access the database through T-codes. But at SAP mmt I am gettting "dialog queue info unabailable" in yellow colour with Dispatch (dispwork.exe). My server config. is Win2k3IBMdb2_v.9.1 + ECC 6.0.
    Kindly guide me to reslove this.

    Hi,
    Kindly check through the below links where the same issue has been resolved. Also, kindly if any windows pacthes have been installed during the process of restoration. Update the kernel to the latest level for all i.e. after updating the kernel (DB and DB independent files) update the other latest files also (like R3trans, tp, dw* etc,,)
       disp+work.EXE (Dispatcher) - Running but Dialog Queue info unavailable,...
       Dispatcher  status: Running but dialog queue info unavailable ... yellow co
       Dispatcher - Running but Dialog Queue info unavailable
    Also, please provide the dev_disp log here.
    Regards,
    Sharath Babu M

  • Running but dialog queue info unavailable,j2ee status info unavailable

    HI ,
    We have a solution manager instance.It has both java and abap.  The problem now is     The dispatcher in the processlist    is displaying the error  "  the instance is running but dialog queue info unavailable,j2ee status info unavailable "    and the instance status is staying in yellow color.
    Guys anyone can suggest me regarding this issue..
    Thanks in advance,
    Chandana.

    Hi,
    Please check whether user id SAPJSF is locked or not. If it is not locked the please check below trace files  dev_dispatcher,std_server#.out,dev_jcontrol,std_dispatcher.out.
    Also refer SAP note 723909 - Java VM settings for J2EE 6.40/7.0
    Below thread may help you.
    J2EE status info unavailable
    Thanks,
    Sushil

  • Running but Dialog Queue info unavailable

    Hi friends,
      I installed ECC 5.0 on server2003(sql server).But now when disp+work.exe is started,this message is thrown out in MMC:"Running but Dialog Queue info unavailable".
      Although this message appear,I still can logon ECC.
      Below is developer trace in MMC for disp+work.exe:
    <i>----
    trc file: "dev_disp", trc level: 1, release: "640"
    Tue May 09 06:34:12 2006
    kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
    length of sys_adm_ext is 312 bytes
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    43
    intno      20020600
    make:      multithreaded, ASCII
    pid        192
    ***LOG Q00=> DpSapEnvInit, DPStart (00 192) [dpxxdisp.c   1100]
         shared lib "dw_xml.dll" version 43 successfully loaded
         shared lib "dw_xtc.dll" version 43 successfully loaded
         shared lib "dw_stl.dll" version 43 successfully loaded
         shared lib "dw_gui.dll" version 43 successfully loaded
    Tue May 09 06:34:17 2006
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3886]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: JAVA is not active
    DpShMCreate: sizeof(wp_adm)          6624     (828)
    DpShMCreate: sizeof(tm_adm)          2219848     (11044)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)          192000     (384)
    DpShMCreate: sizeof(vmc_adm)          0     (320)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 03D10040, size: 2505416)
    DpShMCreate: allocated sys_adm at 03D10040
    DpShMCreate: allocated wp_adm at 03D117A8
    DpShMCreate: allocated tm_adm_list at 03D13188
    DpShMCreate: allocated tm_adm at 03D131B0
    DpShMCreate: allocated wp_ca_adm at 03F310F8
    DpShMCreate: allocated appc_ca_adm at 03F35748
    DpShMCreate: allocated comm_adm_list at 03F36EB8
    DpShMCreate: allocated comm_adm at 03F36ED0
    DpShMCreate: allocated vmc_adm_list at 03F65CD0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 03F65CF8
    DpShMCreate: allocated wall_adm at 03F65D00
    MBUF state OFF
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 1126 blocks reserved for free list.
    ES initialized.
    Tue May 09 06:34:19 2006
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( sheccsrv) [dpxxdisp.c   9736]
    Tue May 09 06:34:20 2006
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 43
    Release check o.K.
    Tue May 09 06:34:35 2006
    MBUF state ACTIVE
    Tue May 09 06:34:36 2006
    DpModState: change server state from STARTING to ACTIVE
    </i>
    If anybody can solve this problem,I will be very thankful.

    OSS Note 72248
    Because the SAP service delivered with SAP MMC Snap-In draws considerably more information from the R/3 kernel currently running, identical information regarding various parameters must be available to both the SAP service as well as the R/3 kernel.Because the SAP service only reads the SAP start and default profile, the value changed in the instance profile for 'rdisp/elem_per_queue' cannot be recognized.
    Set 'rdisp/elem_per_queue' with identical value in the start profile too or make sure that this is set.
    You can check the value in ECC with transaction rz11 and look for 'rdisp/elem_per_queue'.
    With the right mouse button, click on the name of the machine in SAP MMC Snap-In and there select 'All tasks--> Restart service'.After a while, the dispatcher switches to the 'Green' status.

  • "Running but Dialog Queue info unavailable"  with MMC "yellow" status

    after I update my SCM server's WAS 620 kernel patch to 1271,this error apears in MMC disp+work.
    and I have check notes ,find note "72248"
    but after follow the note, and add the parameter"rdisp/elem_per_queue"=2000 (default vealue) in profile ,the note do not work.
    Any idea?someone
    Best Regards

    I download latest kernel patch 1773, problem solved

  • Disp+work.exe - Running but dialog queue statistics unavailable

    Hi,
    We have two diferent instances in the same machine. One on them have disp+work.exe in yellow and show message "Running but dialog queue statistics unabailable". This is right, the queue statistics have no item to show, but I can login perfectly in sapgui and see the processes in tx sm50.
    Where sapmmc read from? Instance profiles? Any other file?
    Thanks for all.

    Yes, problem solved.
    I stopped windows instance service and overwrote the exe.
    Thanks for all again

  • J2EE Status info unavailable after upgrade in NW2004s

    Hi
    I was upgrading the BI server. (AS ABAP, AS JAVA, BI-JAVA and EP)
    of NW2004s from SP06 - SP09
    The uprade went on well but anow after rebooting the server I dont see any J2EE processes running. In SAP MMC, next to the process disp+work.EXE the status is Running, Message Server connection ok, dialog queue time 0.0 sec, J2EE Status info unavailable
    The Dev trace file is as follows
    trc file: "G:\usr\sap\SID\DVEBMGS01\work\dev_jcontrol", trc level: 1, release: "700"
    node name   : jcontrol
    pid         : 7084
    system name : SID
    system nr.  : 01
    started at  : Tue Jan 09 16:43:35 2007
    arguments       :
           arg[00] : G:\usr\sap\SID\DVEBMGS01\exe\jcontrol.EXE
           arg[01] : pf=G:\usr\sap\SID\SYS\profile\SID_DVEBMGS01_hostname
           arg[02] : -DSAPSTART=1
           arg[03] : -DCONNECT_PORT=3055
           arg[04] : -DSAPSYSTEM=01
           arg[05] : -DSAPSYSTEMNAME=SID
           arg[06] : -DSAPMYNAME=hostname_SID_01
           arg[07] : -DSAPPROFILE=G:\usr\sap\SID\SYS\profile\SID_DVEBMGS01_hostname
           arg[08] : -DFRFC_FALLBACK=ON
           arg[09] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 5656] Tue Jan 09 16:43:35 2007
    [Thr 5656] *** WARNING => INFO: Unknown property [instance.box.number=SIDDVEBMGS01hostname] [jstartxx.c   841]
    [Thr 5656] *** WARNING => INFO: Unknown property [instance.en.host=hostname] [jstartxx.c   841]
    [Thr 5656] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]
    [Thr 5656] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties;G:\usr\sap\SID\DVEBMGS01\SDM\program\config\sdm_jstartup.properties]
    -> ms host    : hostname
    -> ms port    : 3900
    -> OS libs    : G:\usr\sap\SID\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties
    -> files [01] : G:\usr\sap\SID\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
    Instance properties
    -> ms host    : hostname
    -> ms port    : 3900
    -> os libs    : G:\usr\sap\SID\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID18529600 : G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID18529650 : G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID18529600           : G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID18529650           : G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] sdm                  : G:\usr\sap\SID\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
    [Thr 5656] *** WARNING => JsfOpenShm: ShmCreate (69, 312160, CREATE) failed(rc = 4 SHM segment already exists) [jsfxxshm.c   715]
    [Thr 5656] *** ERROR => JsfOpenShm: Shm version mismatch (shm "JSF-ADM-CORRUPT", code "JSF-ADM-015") [jsfxxshm.c   761]
    [Thr 5656] *** ERROR => Can't create shared memory segment 69 (rc = 8) [jcntrxx.c    1714]
    [Thr 5656] *** ERROR => Can't initialize JControl Administration [jcntrxx.c    271]
    [Thr 5656] JControlCloseProgram: started (exitcode = -1)
    [Thr 5656] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c   1243]
    [Thr 5656] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c   1250]
    [Thr 5656] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c   1257]
    [Thr 5656] JControlCloseProgram: good bye... (exitcode = -1)
    Thanks for your help
    Regards
    SM

    Dear all,
    We are setting up Diaster recover  (DR ) where we are doing the mirror copy of the Source System to Target System.
    After mounting all the files in Target DR System, i made the following changes in Target System.
    OS: AIX
    Dual stack System(ABAP +JAVA)
    Instance number used :
    00--ASCS00
    02-- DVEBMGS02
    01--SCS01
    03--D03 -------------------------------------------------------------------------->  It is maintained in another DR Server
    Database Used: Oracle
    a)renamed the Profiles (/usr/sap/KBP/SYS/profile).
    b)Changed the dbenv files (/home/kbpadm)  and (/home/orakbp)
    c)set right permissions in all files and folders in /usr/sap.
    d)Oracle is running and DB is also up
    e)Started the profiles using sapcpe
    e)After switching user (sidadm), Started the SAP Applications and SAP applications are up.
    When i checked the GetProcess list according to instance wise, i am getting below output.
    kbpadm>  sapcontrol -nr 02 -function GetProcessList
    31.07.2013 13:16:55
    GetProcessList
    OK
    name, description, dispstatus, textstatus, starttime, elapsedtime, pid
    disp+work, Dispatcher, YELLOW, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable, 2013 07 31 11:26:41, 1:50:14, 14549078
    rslgcoll, Central Syslog Collector, GREEN, Running, 2013 07 31 11:26:41, 1:50:14, 11141296
    rslgsend, Central Syslog Sender, GREEN, Running, 2013 07 31 11:26:41, 1:50:14, 11862158
    igswd_mt, IGS Watchdog, GRAY, Stopped, , , 13631708.
    kbpadm> sapcontrol -nr 01 -function GetProcessList
    31.07.2013 14:41:22
    GetProcessList
    OK
    name, description, dispstatus, textstatus, starttime, elapsedtime, pid
    msg_server, MessageServer, GREEN, Running, 2013 07 31 11:25:53, 3:15:29, 14614568
    enserver, EnqueueServer, GRAY, Stopped, , , 14483586
    kbpadm> sapcontrol -nr 00  -function GetProcessList
    31.07.2013 14:41:55
    GetProcessList
    OK
    name, description, dispstatus, textstatus, starttime, elapsedtime, pid
    msg_server, MessageServer, GREEN, Running, 2013 07 31 11:26:17, 3:15:38, 10879188
    enserver, EnqueueServer, GRAY, Stopped, , , 13041698
    J2EE is not coming up. ALSO plz tel where to update 'system/type'  .
    There is a warning msg :
    J2ee Startup: profile parameter 'system/type' not correctly set to start J2EE; use 'J2EE' for Java only and 'DS' for double stack instance
    Server0 is not running.
    Kindly Assist.
    Regards.
    Gayathri.K

  • Running, MS conn ok, Dia Queue time: 0.00 sec, J2EE status info unavailable

    hi all,
    I have installed solution manager and was running fine but now when i start it then getting below issue in sapmmc
    Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable
    while log of disp+work and dev_jcontrol having issue...
    DpMsgAdmin: Set patchno for this platform to 254
    Release check o.K.
    Fri Oct 29 12:46:57 2010
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 4372
      argv[0] = F:\usr\sap\SOL\SYS\exe\uc\NTAMD64\jcontrol.exe
      argv[1] = F:\usr\sap\SOL\SYS\exe\uc\NTAMD64\jcontrol.exe
      argv[2] = pf=F:\usr\sap\SOL\SYS\profile\SOL_DVEBMGS00_solman4
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=64995
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=SOL
      argv[7] = -DSAPMYNAME=solman4_SOL_00
      argv[8] = -DSAPPROFILE=F:\usr\sap\SOL\SYS\profile\SOL_DVEBMGS00_solman4
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    DpJ2eeLogin: j2ee state = CONNECTED
    Fri Oct 29 12:47:00 2010
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    *** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 568
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2480) [nixxi.cpp    4424]
    *** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c   1212]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    Fri Oct 29 12:47:17 2010
    DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
    Fri Oct 29 12:47:37 2010
    DpEnvCheckJ2ee: switch off j2ee start flag
    DpEnvCheckJ2ee: switch off j2ee start flag
    dev_jcontrol
    trc file: "F:\usr\sap\SOL\DVEBMGS00\work\dev_jcontrol", trc level: 1, release: "700"
    node name   : jcontrol
    pid         : 4372
    system name : SOL
    system nr.  : 00
    started at  : Fri Oct 29 12:46:57 2010
    arguments       :
           arg[00] : F:\usr\sap\SOL\SYS\exe\uc\NTAMD64\jcontrol.exe
           arg[01] : pf=F:\usr\sap\SOL\SYS\profile\SOL_DVEBMGS00_solman4
           arg[02] : -DSAPSTART=1
           arg[03] : -DCONNECT_PORT=64995
           arg[04] : -DSAPSYSTEM=00
           arg[05] : -DSAPSYSTEMNAME=SOL
           arg[06] : -DSAPMYNAME=solman4_SOL_00
           arg[07] : -DSAPPROFILE=F:\usr\sap\SOL\SYS\profile\SOL_DVEBMGS00_solman4
           arg[08] : -DFRFC_FALLBACK=ON
           arg[09] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 2864] Fri Oct 29 12:46:57 2010
    [Thr 2864] *** WARNING => INFO: Unknown property [instance.box.number=SOLDVEBMGS00solman4] [jstartxx.c   841]
    [Thr 2864] *** WARNING => INFO: Unknown property [instance.en.host=solman4] [jstartxx.c   841]
    [Thr 2864] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
    [Thr 2864] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    thanks in advance
    Diya Chopra

    Dear all,
    Even i am also facing same problem.
    We are setting up Diaster recover  (DR ) where we are doing the mirror copy of the Source System to Target System.
    After mounting all the files in Target DR System, i made the following changes in Target System.
    OS: AIX
    Dual stack System(ABAP +JAVA)
    Instance number used :
    00--ASCS00
    02-- DVEBMGS02
    01--SCS01
    03--D03 -------------------------------------------------------------------------->  It is maintained in another DR Server
    Database Used: Oracle
    a)renamed the Profiles (/usr/sap/KBP/SYS/profile).
    b)Changed the dbenv files (/home/kbpadm)  and (/home/orakbp)
    c)set right permissions in all files and folders in /usr/sap.
    d)Oracle is running and DB is also up
    e)Started the profiles using sapcpe
    e)After switching user (sidadm), Started the SAP Applications and SAP applications are up.
    When i checked the GetProcess list according to instance wise, i am getting below output.
    kbpadm>  sapcontrol -nr 02 -function GetProcessList
    31.07.2013 13:16:55
    GetProcessList
    OK
    name, description, dispstatus, textstatus, starttime, elapsedtime, pid
    disp+work, Dispatcher, YELLOW, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable, 2013 07 31 11:26:41, 1:50:14, 14549078
    rslgcoll, Central Syslog Collector, GREEN, Running, 2013 07 31 11:26:41, 1:50:14, 11141296
    rslgsend, Central Syslog Sender, GREEN, Running, 2013 07 31 11:26:41, 1:50:14, 11862158
    igswd_mt, IGS Watchdog, GRAY, Stopped, , , 13631708.
    kbpadm> sapcontrol -nr 01 -function GetProcessList
    31.07.2013 14:41:22
    GetProcessList
    OK
    name, description, dispstatus, textstatus, starttime, elapsedtime, pid
    msg_server, MessageServer, GREEN, Running, 2013 07 31 11:25:53, 3:15:29, 14614568
    enserver, EnqueueServer, GRAY, Stopped, , , 14483586
    kbpadm> sapcontrol -nr 00  -function GetProcessList
    31.07.2013 14:41:55
    GetProcessList
    OK
    name, description, dispstatus, textstatus, starttime, elapsedtime, pid
    msg_server, MessageServer, GREEN, Running, 2013 07 31 11:26:17, 3:15:38, 10879188
    enserver, EnqueueServer, GRAY, Stopped, , , 13041698
    J2EE is not coming up. ALSO plz tel where to update 'system/type'  .
    There is a warning msg :
    J2ee Startup: profile parameter 'system/type' not correctly set to start J2EE; use 'J2EE' for Java only and 'DS' for double stack instance
    Server0 is not running.
    Kindly Assist.
    Regards.
    Gayathri.K

  • J2ee status info unavailable

    hi all,
    we are doing kernel upgradation from 6.40 to 7.00.we followed the below procedure for upgradation:
    1. run directory backup
    2. stopped services (saposcol and sap<sid>_instance no)
    3. stored the extracted files into new run folder.
    4. strated services.
    now my problem is when i start sap through MMC disp+work is showing "dialog info o.k and <b>J2EE status info unavailable</b>"
    please help me where i went wrong.
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        SPS
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    52
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        4832
    Tue Apr 24 22:39:35 2007
    kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
    length of sys_adm_ext is 572 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 4832) [dpxxdisp.c   1231]
         shared lib "dw_xml.dll" version 52 successfully loaded
         shared lib "dw_xtc.dll" version 52 successfully loaded
         shared lib "dw_stl.dll" version 52 successfully loaded
         shared lib "dw_gui.dll" version 52 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    Tue Apr 24 22:39:40 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5233]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >saptharishi_SPS_00                      <
    DpShMCreate: sizeof(wp_adm)          18304     (1408)
    DpShMCreate: sizeof(tm_adm)          3954072     (19672)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1452)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06F40040, size: 4613144)
    DpShMCreate: allocated sys_adm at 06F40040
    DpShMCreate: allocated wp_adm at 06F41E28
    DpShMCreate: allocated tm_adm_list at 06F465A8
    DpShMCreate: allocated tm_adm at 06F465D8
    DpShMCreate: allocated wp_ca_adm at 0730BB70
    DpShMCreate: allocated appc_ca_adm at 07311930
    DpShMCreate: allocated comm_adm at 07313870
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 07394730
    DpShMCreate: allocated gw_adm at 07394770
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 073947A0
    DpShMCreate: allocated wall_adm at 073947A8
    MBUF state OFF
    EmInit: MmSetImplementation( 2 ).
    MM diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 1697 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 5532
      argv[0] = D:\usr\sap\SPS\DVEBMGS00\j2ee\os_libs\jcontrol.exe
      argv[1] = D:\usr\sap\SPS\DVEBMGS00\j2ee\os_libs\jcontrol.exe
      argv[2] = pf=D:\usr\sap\SPS\SYS\profile\SPS_DVEBMGS00_saptharishi
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1135
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=SPS
      argv[7] = -DSAPMYNAME=saptharishi_SPS_00
      argv[8] = -DSAPPROFILE=D:\usr\sap\SPS\SYS\profile\SPS_DVEBMGS00_saptharishi
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1617]
    Tue Apr 24 22:39:41 2007
    ***LOG Q0K=> DpMsAttach, mscon ( saptharishi) [dpxxdisp.c   11414]
    DpStartStopMsg: send start message (myname is >saptharishi_SPS_00                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Tue Apr 24 22:39:42 2007
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 52
    Release check o.K.
    Tue Apr 24 22:40:11 2007
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    Tue Apr 24 22:40:41 2007
    ERROR => W11 (pid 5628) died [dpxxdisp.c   14021]
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Tue Apr 24 22:39:41 2007
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\SPS\SYS\exe\run\dbmssslib.dll' ...
    B  Library 'D:\usr\sap\SPS\SYS\exe\run\dbmssslib.dll' loaded
    B  Version of 'D:\usr\sap\SPS\SYS\exe\run\dbmssslib.dll' is "700.08", patchlevel (0.52)
    B  New connection 0 created
    M sysno      00
    M sid        SPS
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    52
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        5540
    M
    M  kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
    M  length of sys_adm_ext is 572 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5540) [dpxxdisp.c   1293]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          18304     (1408)
    M  DpShMCreate: sizeof(tm_adm)          3954072     (19672)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1452)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 07740040, size: 4613144)
    M  DpShMCreate: allocated sys_adm at 07740040
    M  DpShMCreate: allocated wp_adm at 07741E28
    M  DpShMCreate: allocated tm_adm_list at 077465A8
    M  DpShMCreate: allocated tm_adm at 077465D8
    M  DpShMCreate: allocated wp_ca_adm at 07B0BB70
    M  DpShMCreate: allocated appc_ca_adm at 07B11930
    M  DpShMCreate: allocated comm_adm at 07B13870
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 07B94730
    M  DpShMCreate: allocated gw_adm at 07B94770
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 07B947A0
    M  DpShMCreate: allocated wall_adm at 07B947A8
    X  EmInit: MmSetImplementation( 2 ).
    X  MM diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Tue Apr 24 22:39:42 2007
    M  ThInit: running on host saptharishi
    M 
    M Tue Apr 24 22:39:43 2007
    M  calling db_connect ...
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'D:\usr\sap\SPS\SYS\exe\run\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      52
    C    patchcomment MSSQL: Avoid cursor on sap_ procs, ABINDEX (935477)
    C  np:(local) connection used on SAPTHARISHI
    C  CopyLocalParameters: dbuser is 'sps'
    C 
    C Tue Apr 24 22:39:44 2007
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Provider Release:9.00.2047.00
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  CheckCodepageType: line 24099. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
    C  sloledb.cpp [CheckCodepageType,line 24099]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
    C  Procname: [CheckCodepageType -- no proc]
    C  Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 500 dynamic statements (2836000 bytes), total 34356068 bytes
    C  Using shared procedure name cache SAPTHARISHI_SPSSPS_SPS_MEM initialized by another process.
    C  Connected to db server : [SAPTHARISHI] server_used : [np:(local)], dbname: SPS, dbuser: sps
    C  pn_id:SAPTHARISHI_SPSSPS_SPS
    C  Using MARS (on sql 9.0)
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20070424 223943 SAPTHARISHI    
    C 
    C Tue Apr 24 22:39:45 2007
    C  The IRow interface is supported by this OLEDB provider
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I 
    I Tue Apr 24 22:40:02 2007
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 0CA70040, size: 5280000)
    M  SHM_ROLL_AREA          (addr: 62B00040, size: 251658240)
    M  SHM_PAGING_AREA          (addr: 103C0040, size: 109051904)
    M  SHM_ROLL_ADM               (addr: 09DF0040, size: 2512114)
    M  SHM_PAGING_ADM          (addr: 0A060040, size: 525344)
    M  ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0A0F0040
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 12160 bytes (50 server) at 09C80040
    X  EmInit: MmSetImplementation( 2 ).
    X  MM diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 18C400C8, size: 30000128, end: 1A8DC4C8)
    B  dbtbxbuf: Buffer TABLP (addr: 1A8E00C8, size: 10240000, end: 1B2A40C8)
    B  dbexpbuf: Buffer EIBUF (addr: 1B2B00D0, size: 4194304, end: 1B6B00D0)
    B  dbexpbuf: Buffer ESM   (addr: 1B6C00D0, size: 4194304, end: 1BAC00D0)
    B  dbexpbuf: Buffer CUA   (addr: 1BAD00D0, size: 3686400, end: 1BE540D0)
    B  dbexpbuf: Buffer OTR   (addr: 1BE600D0, size: 4194304, end: 1C2600D0)
    M 
    M Tue Apr 24 22:40:03 2007
    M  rdisp/reinitialize_code_page -> 0
    M  icm/accept_remote_trace_level -> 0
    M  rdisp/no_hooks_for_sqlbreak -> 0
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 216337B0
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 21F600A8
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 21F60430
    S    using messages for server info
    S  size of spec char cache entry: 297028 bytes (timeout 100 sec)
    S  size of open spool request entry: 2132 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  PXA: Fragment Size too small: 195 MB, reducing # of fragments
    A  System page size: 4kb, total admin_size: 13000kb, dir_size: 12944kb.
    A  Attached to PXA (address 24640040, size 400000K)
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    B 
    B Tue Apr 24 22:40:04 2007
    B  dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
    B   max_blocking_factor =  50,  max_in_blocking_factor      = 255,
    B   min_blocking_factor =   5,  min_in_blocking_factor      =  10,
    B   prefer_union_all    =   1,  prefer_join                 =   1,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   0,
    B   convert AVG         =   1,  alias table FUPD            =   0,
    B   escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,
    B   select *            =0x00,  character encoding          = STD / []:X,
    B   use_hints           = abap->1, dbif->0x1, upto->0, rule_in->0,
    B                         rule_fae->0, concat_fae->0, concat_fae_or->0
    A 
    A Tue Apr 24 22:40:05 2007
    A  ABAP ShmAdm attached (addr=54444000 leng=20955136 end=55840000)
    A  >> Shm MMADM area (addr=548B9E58 leng=126176 end=548D8B38)
    A  >> Shm MMDAT area (addr=548D9000 leng=16150528 end=55840000)
    A  RFC Destination> destination saptharishi_SPS_00 host saptharishi system SPS systnr 0 (saptharishi_SPS_00)
    A 
    A Tue Apr 24 22:40:06 2007
    A  RFC Options> H=saptharishi,S=00,d=2,
    B  table logging switched off for all clients
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M  ThrCreateShObjects          allocated 13730 bytes at 0FFD0040
    N 
    N Tue Apr 24 22:40:07 2007
    N  SsfSapSecin: putenv(SECUDIR=D:\usr\sap\SPS\DVEBMGS00\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is D:\usr\sap\SPS\SYS\exe\run\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N 
    N Tue Apr 24 22:40:08 2007
    N  ===...sucessfully completed.
    N  =================================================
    M 
    M Tue Apr 24 22:40:09 2007
    M  *** ERROR => SlicLikeyGetAllRecords: RS_OPEN failed rc=32 [sliclikey.c  988]
    M  *** ERROR => likey_init: likeyche_fill_buffer: couldn't get the list of all records from the persistence. [sliclikey.c  1269]
    M  *** ERROR => SlicLikeyInit: likey_init failed: 1 [sliclikey.c  261]
    M  *** ERROR => SAPlicense: LIKEY initialisation failed! [slicshm.c    268]
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 700, [7000.0.52.20050900]
    W    ITS Plugin: Int.version, [32]
    W    ITS Plugin: Feature set: [10]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    E  Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume saptharishi_SPS_00
    E 
    E Tue Apr 24 22:40:10 2007
    E  Replication is disabled
    E 
    E Tue Apr 24 22:40:11 2007
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    M  ThAdXStartStop: handle startup from saptharishi_SPS_01    1 saptharishi        
    M  *** ERROR => R/3 release 640 is not supported with this kernel (700) [thxxsick.c   237]
    A  *** ERROR => R/3 release 640 is not supported with this kernel (700) [sapicc.c     1082]
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A 
    A Tue Apr 24 22:40:21 2007
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A 
    A Tue Apr 24 22:40:22 2007
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 24 22:40:22 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#11 $ SAP.
    A  Function ab_isyst Line 1397.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A 
    A Tue Apr 24 22:40:53 2007
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A 
    A Tue Apr 24 22:40:54 2007
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 24 22:40:54 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#11 $ SAP.
    A  Function ab_isyst Line 1397.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A 
    A Tue Apr 24 22:41:01 2007
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 24 22:41:01 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#11 $ SAP.
    A  Function ab_isyst Line 1397.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_BTCHLOG|RX_VBLOG
    A  Error when initializing the work area SYST..
    A 
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A 
    A Tue Apr 24 22:41:23 2007
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 24 22:41:23 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#11 $ SAP.
    A  Function ab_isyst Line 1397.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_SAPDEXT
    A  Error when initializing the work area SYST..
    A 
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A 
    A Tue Apr 24 22:41:25 2007
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 24 22:41:25 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#11 $ SAP.
    A  Function ab_isyst Line 1397.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A 
    A Tue Apr 24 22:41:26 2007
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_RABAX
    A  Error when initializing the work area SYST..
    A 
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A 
    A Tue Apr 24 22:41:27 2007
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 24 22:41:27 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#11 $ SAP.
    A  Function ab_isyst Line 1397.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_SAPDEXT
    A  Error when initializing the work area SYST..
    A 
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A 
    A Tue Apr 24 22:41:28 2007
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 24 22:41:28 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#11 $ SAP.
    A  Function ab_isyst Line 1397.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_RABAX
    A  Error when initializing the work area SYST..
    A 
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A 
    A Tue Apr 24 22:41:29 2007
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 24 22:41:29 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#11 $ SAP.
    A  Function ab_isyst Line 1397.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_SAPDEXT
    A  Error when initializing the work area SYST..
    A 
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A 
    A Tue Apr 24 22:41:30 2007
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 24 22:41:30 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#11 $ SAP.
    A  Function ab_isyst Line 1397.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_RABAX
    A  Error when initializing the work area SYST..
    A 
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A 
    A Tue Apr 24 22:41:31 2007
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 24 22:41:31 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#11 $ SAP.
    A  Function ab_isyst Line 1397.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_SAPDEXT
    A  Error when initializing the work area SYST..
    A 
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13002]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A 
    A Tue Apr 24 22:41:32 2007
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 24 22:41:32 2007
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code SYSTEM_CANT_CLEAR.
    A  Module  $Id: //bas/700_REL/src/krn/runt/abinit.c#11 $ SAP.
    A  Function ab_isyst Line 1397.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RAB

    Hi,
    This is because your ABAP system has come up but your java instance is still down.
    Hope you have your kernel files right. Do compare it your old kernel files. Do have the most important files.
    Since java is not coming up. so under J2ee process table look for the problem in MMC. That is if dispatcher has the problem or the server nodes.
    revert back with the answers.
    Hope this helps you to know how to troubleshoot.
    regards and do reward for helpful answers.

  • Disp+work info unavailable

    Hi all,
    I am Applying the kernel patches from 43 to 175.after applying the patch (i followed same as kernel upgradation) i started MMC and services.but problem is in MMC disp+work is showing below status.
    <b>Dialog info unavailable</b>
    please find the trace files.
    trc file: "dev_w0", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    B 
    B Thu Apr 26 19:27:11 2007
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\SPS\SYS\exe\run\dbmssslib.dll' ...
    B  Library 'D:\usr\sap\SPS\SYS\exe\run\dbmssslib.dll' loaded
    B  Version of 'D:\usr\sap\SPS\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.152)
    B  New connection 0 created
    M sysno      00
    M sid        SPS
    M systemid   560 (PC with Windows NT)
    M relno      6400
    M patchlevel 0
    M patchno    175
    M intno      20020600
    M make:      multithreaded, Unicode
    M pid        5560
    M
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5560) [dpxxdisp.c   1162]
    I  MtxInit: -2 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpShMCreate: sizeof(wp_adm)          17112     (1316)
    M  DpShMCreate: sizeof(tm_adm)          2969176     (14772)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpShMCreate: sizeof(comm_adm)          290000     (580)
    M  DpShMCreate: sizeof(vmc_adm)          0     (424)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 07750040, size: 3388264)
    M  DpShMCreate: allocated sys_adm at 07750040
    M  DpShMCreate: allocated wp_adm at 07751B88
    M  DpShMCreate: allocated tm_adm_list at 07755E60
    M  DpShMCreate: allocated tm_adm at 07755E88
    M  DpShMCreate: allocated wp_ca_adm at 07A2ACE0
    M  DpShMCreate: allocated appc_ca_adm at 07A30AA0
    M  DpShMCreate: allocated comm_adm_list at 07A329E0
    M  DpShMCreate: allocated comm_adm at 07A329F8
    M  DpShMCreate: allocated vmc_adm_list at 07A796C8
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 07A796F0
    M  DpShMCreate: allocated wall_adm at 07A796F8
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Thu Apr 26 19:27:13 2007
    M  calling db_connect ...
    C  Thread ID:5572
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'D:\usr\sap\SPS\SYS\exe\run\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      152
    C    patchcomment Connection check on (0,0) (988711)
    C  np:(local) connection used on SAPTHARISHI
    C  CopyLocalParameters: dbuser is 'sps'
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Provider Release:9.00.2047.00
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Apr 26 19:27:16 2007
    C  Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5688000 bytes), total 37208068 bytes
    C  Using shared procedure name cache SAPTHARISHI_SPSSPS_SPS_MEM initialized by another process.
    C  Connected to db server : [SAPTHARISHI] server_used : [np:(local)], dbname: SPS, dbuser: sps
    C  pn_id:SAPTHARISHI_SPSSPS_SPS
    C  Using MARS (on sql 9.0)
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20070426 192713 SAPTHARISHI    
    C  The IRow interface is supported by this OLEDB provider
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I 
    I Thu Apr 26 19:27:22 2007
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 0CB20040, size: 5280000)
    M  SHM_ROLL_AREA          (addr: 62B00040, size: 251658240)
    M  SHM_PAGING_AREA          (addr: 104E0040, size: 109051904)
    M  SHM_ROLL_ADM               (addr: 09BF0040, size: 2512114)
    M  SHM_PAGING_ADM          (addr: 09E60040, size: 525344)
    M  ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 09EF0040
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 12160 bytes (50 server) at 09A80040
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 18D600C8, size: 30000128, end: 1A9FC4C8)
    B  dbtbxbuf: Buffer TABLP (addr: 1AA000C8, size: 10240000, end: 1B3C40C8)
    B  dbexpbuf: Buffer EIBUF (addr: 1B3D00D0, size: 4194304, end: 1B7D00D0)
    B  dbexpbuf: Buffer ESM   (addr: 1B7E00D0, size: 4194304, end: 1BBE00D0)
    B  dbexpbuf: Buffer CUA   (addr: 1BBF00D0, size: 3686400, end: 1BF740D0)
    B  dbexpbuf: Buffer OTR   (addr: 1BF800D0, size: 4194304, end: 1C3800D0)
    M 
    M Thu Apr 26 19:27:23 2007
    M  rdisp/reinitialize_code_page -> 0
    M  icm/accept_remote_trace_level -> 0
    M  rdisp/no_hooks_for_sqlbreak -> 0
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S 
    S Thu Apr 26 19:27:24 2007
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 0598C700
    C  The IRow interface is supported by this OLEDB provider
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 220D00A8
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 220D0430
    S    using messages for server info
    S  size of spec char cache entry: 297028 bytes (timeout 100 sec)
    S  size of open spool request entry: 2140 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  System page size: 4kb, total admin_size: 12980kb, dir_size: 12944kb.
    A  PXA allocated (address 24640040, size 400000K)
    A  System name
    A  MSSQL............................SPS........saptharishi........................................
    A  is used for RFC security.
    A  Sharedbuffer token: 41534050...33 (len: 111)====== 8d778282e0ce9b4afe2e0217...
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A 
    A Thu Apr 26 19:27:25 2007
    A  ABAP ShmAdm attached (addr=543F4000 leng=20955136 end=557F0000)
    A  >> Shm MMADM area (addr=54869E50 leng=126176 end=54888B30)
    A  >> Shm MMDAT area (addr=54889000 leng=16150528 end=557F0000)
    A  RFC Destination> destination saptharishi_SPS_00 host saptharishi system SPS systnr 0 (saptharishi_SPS_00)
    A  RFC Options> H=saptharishi,S=00,d=2
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC abap/SIGCHILD_default not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    A  Hotpackage version: 11
    M  ThrCreateShObjects          allocated 13730 bytes at 22240040
    N 
    N Thu Apr 26 19:27:26 2007
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is D:\usr\sap\SPS\SYS\exe\run\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N 
    N Thu Apr 26 19:27:27 2007
    N  ===...sucessfully completed.
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    W  =================================================
    W  === ipl_Init() called
    B    dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
    B     max_blocking_factor =  50,  max_in_blocking_factor      = 255,
    B     min_blocking_factor =   5,  min_in_blocking_factor      =  10,
    B     prefer_union_all    =   1,  prefer_union_for_select_all =   0,
    B     prefer_fix_blocking =   0,  prefer_in_itab_opt          =   0,
    B     convert AVG         =   1,  alias table FUPD            =   0,
    B     escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,
    B     select *            =0x00,  character encoding          = STD / []:X,
    B     use_hints           = abap->1, dbif->0x1, upto->0, rule_in->0,
    B                           rule_fae->0, concat_fae->0, concat_fae_or->0
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 640, [6400.0.175.20020600]
    W    ITS Plugin: Int.version, [32]
    W    ITS Plugin: Feature set: [15]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    E  Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume saptharishi_SPS_00
    E 
    E Thu Apr 26 19:27:29 2007
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    M  ThAdXStartStop: handle startup from saptharishi_SPS_01    1 saptharishi        
    S  server @>SSRV:saptharishi_SPS_00@< appears or changes (state 1)
    N 
    N Thu Apr 26 19:28:53 2007
    N  login/password_change_for_SSO : 1 -> 1
    M  SecAudit(RsauShmInit): WP attached to existing shared memory.
    M  SecAudit(RsauShmInit): addr of SCSA........... = 05F30040
    M  SecAudit(RsauShmInit): addr of RSAUSHM........ = 05F307A8
    M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05F307E0
    M  SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05F307EC
    M 
    M Thu Apr 26 19:35:42 2007
    M  in_ThErrHandle: 1
    M  ThIErrHandle: new stat of W0 is WP_SHUTDOWN   
    M  ThIErrHandle: I'm during shutdown
    M  PfStatDisconnect: disconnect statistics
    M  Entering ThSetStatError
    C  SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 1
    M  ThIErrHandle: don't try rollback again
    M  ThShutDownServer: shutdown server
    M  PfStatIndInit: Initializing Index-Record
    M  PfWriteIntoFile: copied shared buf (0 bytes) to local buf
    M  PfTimeFactor: new value: 19800
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    B  Disconnecting from ALL connections:
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 INACTIVE     NO  YES NO  000 255 255 20070426 192713 SAPTHARISHI    
    B  Disconnected from connection 0
    B  statistics db_con_commit (com_total=84, com_tx=18)
    B  statistics db_con_rollback (roll_total=7, roll_tx=0)
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 5560) [dpnttool.c   357]
    trc file: "dev_ms", trc level: 1, release: "640"
    [Thr 7416] Thu Apr 26 19:27:04 2007
    [Thr 7416] MsSSetTrcLog: trc logging not active
    [Thr 7416] systemid   560 (PC with Windows NT)
    [Thr 7416] relno      6400
    [Thr 7416] patchlevel 0
    [Thr 7416] patchno    171
    [Thr 7416] intno      20020600
    [Thr 7416] pid        7400
    [Thr 7416] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 7400) [msxxserv.c   1680]
    [Thr 7416] MsHttpInit: full qualified hostname = saptharishi
    [Thr 7416] HTTP logging is switch off
    [Thr 7416] set HTTP state to LISTEN
    [Thr 7416] *** I listen to port sapmsSPS (3600) ***
    [Thr 7416] *** HTTP port 8100 state LISTEN ***
    [Thr 7416] CUSTOMER KEY: >G1021470092<
    [Thr 7416] Thu Apr 26 19:27:35 2007
    [Thr 7416] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
    [Thr 7416] Thu Apr 26 19:28:02 2007
    [Thr 7416] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
    [Thr 3468] Thu Apr 26 19:37:45 2007
    [Thr 3468] MsSExit: received SIGINT (2)
    [Thr 3468] ***LOG Q02=> MsSHalt, MSStop (Msg Server 7400) [msxxserv.c   5413]
    Regards,
    Rajender.J

    Hi,
    would you please publish the dev_disp file.
    Dimitry Haritonov
    Message was edited by:
            Dimitry Haritonov

Maybe you are looking for

  • How to send email using SPUtility.SendEmail method

    hi all,          I am using SPUtility.SendEmail method to send email to list of users. but i am unable to send it. Code is not throwing any kind of error. Can anyone guide me steps to send email programmatically . Regards, Milan C.

  • Return PO scenario.

    Hello Experts, Currently we are using the Return PO facility for sending the Materials back to vendor. But all these material are stockable materials. I wanted to know whether it is possible to use return PO for the consumables which are taken in the

  • Radar Charts SSRS

    Hi All, I have requirement to develop a report like below image. Is to possible to develop this kind of reports in SQL Server Reporting services 2008 r2. I have tried with one example but the major grid lines shows only circle it is not changing to b

  • Finished Goods Report

    Dear Experts, In our legacy Inventory Managment system we have develop following layout for Finished goods periodic report. (From date to Date) Materiral Description,     UOM,   Opening ,  Receipt , Return , Transfer, Dispatch , Reprocess, Repack, Re

  • Imessage and Itunes account question.

    I have an iphone 5s with my own separate Imessage account but my kids all share my itunes account. I notice that when I'm going to send a text it will attempt to autocomplete and shows me all my kids contacts on their phones. Why is this if my imessa