Upgrade Prime Infra 1.4 to 2.x
Hello,
Is there a timeframe for the Prime Infra 1.4 Version to get upgraded to 2.x?
thanks in advance
Martin
Note: Cisco Prime Infrastructure version 1.4 and 1.4.x cannot be upgraded to version 2.1; upgrade will be available for a future 2.x release.
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/datasheet-c78-731516.html
Similar Messages
-
Upgrade Prime Infra 1.4 to 2.0: is there no way other than fresh install
Hello,
We want to upgrade a Prime Infrastructure from 1.4 to 2.0.
Cisco document says that there is no upgrade path from Prime Infrastructure 1.4 to Prime Infrastructure 2.0.
So how to do if I want to upgrade from 1.4 to 2.0: I have to insert all configuration manually? :'(
Regards,
AntraHI Antra,
There is no upgrade path from Prime Infrastructure 1.4 to Prime Infrastructure 2.0.
as per my knowledge you must start it from scratch.
Info:
Prime Infrastructure 1.4 is a separate software train parallel with Prime Infrastructure 1.3 and 2.0.
The next maintenance release for users of Prime Infrastructure 1.4 will be Prime Infrastructure 2.2, currently targeted for the September/October/November 2014 timeframe.
So if you have 1.4 or 2.2 then you can not upgrade and downgrade.
Regards -
Upgrading Wireless Infra.
Hi Experts,
I am planning to upgarde current Cisco 5508s and Cisco WCS. We have currently 1142n APs (around 400) and we will be adding 3600 APs to existing network.
I am planning to move from current code to the latest code and I would like to know any considerations or if anyone has done similar upgrades and can share their experience, any bugs or issues encountered.
WLCs 5508 upgrade from 6.0.182.0 (current) to 7.0.220.0 (Intermediate) and the to 7.4.100.60 (Final) with FUS upgrade from 1.3 to 1.7
WCS to Prime Infra 1.2 : WCS 6.0.132.0 (current VM) to 7.0.220.0 then install new NCS 1.1.1.24 (VM) and migrate WCS data to NCS 1.1.1.24 and finally upgrade NCS 1.1.1.24 to Prime Infra 1.2.1.12 (VM) and decommision WCS. I will apply license after upgrade to Prime Infra. (WCS to Prime migration license).
Please share your thoughts.
Thanks in advance.
hardik..All sound good, If you want to prepare for down the road technology (if is a big structure) you should think that for every 3 ap keep one as 1142, and two of 3600 then in the future you could add the 802.11ac module and the next Wi-Fi/Micro Cell DAS module for 3600 (Still on the works) that should be available Oct-Dec time frame... By using 7.4 or higher on WLC & MSE with Prime 1.3 or higher you will add some other capabilities to your network (Cisco Connected Mobility Experience CME-CMX http://www.cisco.com/en/US/netsol/ns1205/index.html )
If you have any question, comments or concern please contact me...
Thank you,
Manuel Baez
Sales Eng
Need help ? call Sales Acceleration Center(SAC) at Toll Free (USA) :1-800-225-0905 International +1-408-902-4872 or send email to [email protected] or Live Chat: http://tinyurl.com/sacucs -
Cisco Prime Infra 2.1 Standard Install using OVA File HD Requirements
Hi guys,
I wanna install the Cisco Prime Infra Standard 2.1 using the OVA File but I haven't 900 HD Space continuous in Storage.
Two questions
01) The Virtual Machine allocate this space (900 HD) during the install or allocate dynamically as needed ?
02) There is a option to install the Standard Version using less HD space ?
Thanks
My Best Regards
Andre Gustavo LomonacoInitially we installed medium when Prime 2.0 came out, however about 3 months lately we needed to upgrade to standard/pro. Upgrading the CPU/Core was seamless
Install a smaller OVA with enough cpu/cores for the standard and just add disk space later on
https://supportforums.cisco.com/document/9871606/adding-disk-space-prime-infrastructure
Its not a recommended practice but there are work around... -
Hi All
Trying to do an upgrade prime 2.1.0.0.78 to prime 2.2.
I have saved an app backup off the exisitng prime 2.1.0.0.78
However when i try to restore to the new prime infra 2.2
with the backup from the 2.1.0.0.78 it fails with a database error
My technical support say i should change the new vm server
to match ip addresses etc with the old one but that cant be right
as this is the official blurb for the types of backups ...
Application backups: These contain all Prime Infrastructure application data, but do not include host-specific settings, such as the server hostname and IP address. Application backups are intended for use when Prime Infrastructure is running as an OVA on customer-supplied hardware, as restoring from the backup may need to be to a server with completely different host settings.
Appliance backups: These contain all application data and host-specific settings, including the hostname, IP address, subnet mask, and default gateway. Appliance backups are intended for use when Prime Infrastructure is running on a Cisco-supplied appliance, and restoration is most likely to be to a server with the same host settings.
I am obviously using the application backups
Kind regards
SteveHere you go ....
Initiating restore. Please wait...
Restore Started at 02/02/15 17:29:54
Stage 1 of 9: Transferring backup file ...
-- completed at 02/02/15 17:30:59
Stage 2 of 9: Decrypting backup file ...
-- completed at 02/02/15 17:34:00
Stage 3 of 9: Unpacking backup file ...
-- completed at 02/02/15 17:34:01
Stopping strongSwan IPsec failed: starter is not running
Stage 4 of 9: Decompressing backup ...
-- completed at 02/02/15 17:34:31
Stage 5 of 9: Restoring Support Files ...
-- completed at 02/02/15 17:34:32
Stage 6 of 9: Restoring Database Files ...
-- completed at 02/02/15 17:34:51
Stage 7 of 9: Recovering Database ...
Error while restoring and recovering database, please check the logs. -
Cisco Prime Infra 1.2 Web server
Hello,
I have installed a version of Cisco Prime Infrastructure 1.2.11 with a kickstart .ova file on my production network.
Everything goes fine and I follow the instructions for installation ; i can ping my Cisco PI server and ssh into it as admin.
However, when I try to reach the web server via https, it does not work. I have reviewed my proxy settings and they are not to blame. The nslookup returns the IP address when I poll it. I have read elsewhere that I would need "NCS" service to be started, but I can't find anything called NCS on my Prime Infra server in CLI mode.
Anyone with a suggestion for this issue ?
Thanks
JeremyActually I know what's happening ; the PnP (plug n play) setup was not configured, and so 443 port was not up.
I configured PnP using "pnp setup" command, but then I have to supply a list of certificates and keys :
Enter absolute pathname of PnP Gateway server key file:
Enter absolute pathname of PnP Gateway server certificate file:
Enter absolute pathname of Prime Infrastructure server certificate file:
I tried to do this with the private key I had for my server. I created it on my Certificate Authentication and got a .key and a .csr (certificate server request).
However when i feed them to my PnP setup I get this error :
Setup is in progress.......
Stop PnP Gateway server
OpenSSL command failed for mycert.csr and mykey.key
any idea as to why this is happening?
I read elswhere again that i need to run commands with "ncs" but I don't have "ncs" commands on my prompt...
Thank you for your time -
Can Cisco Prime Infra 2.1 work as syslog server
Hello all,
Customer want Cisco Prime Infra 2.1 to work as syslog server. they want to query text in syslog and get raw log file from Cisco Prime Infra. but when i see in user interface. I think that it cannot query and search text in syslog. but i am not sure whether we can get raw log file per devices from Cisco Prime Infra. Can anyone know about this.?
thanks
sompojHi Sompoj,
In the prime infrastructure Syslogs are directly read from udp port 514 and then filtered
, the non SEV1 and SEV2 syslogs will be dropped and will not be entered into db . The
syslog messages will not be saved into log files .
Thanks-
Afroz
****Ratings Encourages Contributors **** -
Upgrade Prime 2.0 to Prime 2.1 Software
Which software download (below) is used to upgrade Prime 2.0 to Prime 2.1 in a VM environment?
Cisco_Prime_LMS_4_2_500.iso
PMEDIA; DL-DVD, Prime LMS - Small Config
Cisco_Prime_LMS_4_2_1500.iso
PMEDIA; DL-DVD, Prime LMS - Medium Config
Cisco_Prime_LMS_4_2_5000.iso
PMEDIA; DL-DVD, Prime LMS - Large Config
Cisco_Prime_LAN_Management_Solution_4_2.iso
PMEDIA; DL-DVD, Prime LMS - Physical Appliance
Cisco_Prime_LAN_Management_Solution_4_2.iso
PMEDIA; DVD, Prime LMS - Windows
LMS4_2_SOL.iso
PMEDIA; DVD, Prime LMS - Remote Syslog Collector, ISO
Remote_Syslog_Collector_5_2.iso
PMEDIA; DVD, Prime LMS - Remote Syslog Collector, OVA
Cisco_Prime_RSAC_5_2_500.iso
PMEDIA; DL-DVD, Prime LMS - Upgrade Installer for LMS 4.2.2
LMS422.iso
PMEDIA;DL-DVD, Prime Infrastructure 2.0- PnP Gateway
PNP-GATEWAY-VM-2.0.0.28.ova
PMEDIA;DL-DVD, Cisco Plug and Play Application
isco-prime-pnp-app-k9-2.0.0.28.zip
PMEDIA;DL-DVD, Cisco Plug and Play Application
PI-VA-2.1.0.0.87-Express.ova
PMEDIA;DL-DVD, Prime Infrastructure 2.1 - Express Config
PI-VA-2.1.0.0.87-Standard.ova
PMEDIA;DL-DVD, Prime Infrastructure 2.1 - Standard Config
PI-VA-2.1.0.0.87-Pro.ova
PMEDIA;DL-DVD, Prime Infrastructure 2.1 - Pro Config
PI-Upgrade-2.1.0.0.87.tar.gz
PMEDIA;DL-DVD, Prime Infrastructure 2.1 - Upgrade Physical and Virtual
PI-APL-2.1.0.0.87-1-K9.iso
PMEDIA;DL-DVD, Prime Infrastructure 2.1 - Physical ApplianceHi ,
you can download any one of the below as per your network and hardware specification of the server::
PI-VA-2.1.0.0.87-Express.ova PMEDIA;DL-DVD, Prime Infrastructure 2.1 - Express Config
PI-VA-2.1.0.0.87-Standard.ova PMEDIA;DL-DVD, Prime Infrastructure 2.1 - Standard Config
PI-VA-2.1.0.0.87-Pro.ova PMEDIA;DL-DVD, Prime Infrastructure 2.1 - Pro Config
check the below link for more deatils:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/quickstart/guide/cpi_qsg.html#pgfId-46865
Thanks-
Afroz
***Ratings Encourages Contributors *** -
Cisco Prime Infra and SMS gateway integration
Hello,
Can anyone point me to right documents or resources to integrate cisco prime infra 2.x with SMS gateway?
Is there any way I can get SMS alerts for critical events in Cisco Prime Infra 2.x?
Any suggestion is highly appreciated.
Regards,
GirishNot directly.
If you configure PI to email you on alerts, many carriers allow you receive SMS via an email address - i.e. <your_number>@<your_carrier> -
ISE ( Idendity Service Engine ) & MSE (Mobility Service Engine ) & Prime Infra
What is the difference between ISE ( Idendity Service Engine ) & MSE (Mobility Service Engine ) & Prime Infra .
How this will be used along with WLC & AP & wireless Users.The Cisco Identity Services Engine (ISE) is an all-in-one enterprise policy control product that enables comprehensive secure wired, wireless, and VPN access, leading to more productive workers and lower operations costs. When operating in a network, ISE provides the following key features: 1.Rigorous identity enforcement 2. Extensive policy enforcement 3.
Security compliance 4. Automated onboarding whereas Cisco Mobility Services Engine supports RTLS and WIPS and Cisco Prime is centralize wireless and wired Monitoring and management solution. ISE and MSE both can be integrated with Cisco Prime. For more deatil over these products you can see the below links.
http://www.cisco.com/en/US/prod/netmgtsw/prime.html
http://www.cisco.com/en/US/prod/collateral/wireless/ps9733/ps9742/data_sheet_c78-475378.html
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11637/ps11195/data_sheet_c78-656174.html -
Prime Infra 2.0 alert when syslog message received
Dear member,
May I know did prime infra 1.3, 2.0 can support alerted user when received a syslog message?
if yes, and configiuration guide for reference?
RegardsHi Russ,
PI does not actually keep a record of the raw syslog messages it receives, and there is no report for syslogs. When PI receives a syslog, it will immediately process the message and convert it to an event/alarm.
Also, note that PI only processes severity 1 and 2 syslogs. The closest thing you can get to a syslog report
would be to run anadvanced search for events
For other alarms and events you can go to Operate > Alarms
& Events > Email Notification page. Make sure that the alarm categories that you
want to have notifications for also has the Enable checkbox checked.
Thanks-
Afroz
[Do rate the useful post] -
Poblem after upgrade Prime NCS to Infrastructure
Hi,
I just upgrade Prime NCS 1.1.1.24 to 2.0 becuase we had several problem with NCS Aplication, after this upgrade I can´t longer see the Access Point on the floor maps, the APs are still assigned to the map and if I try to edit the location or asign APs to a new map, the aplication keeps loading but doesn´t do anything. I follow the quick installation guide for upgrading and installed the ncs_1_1_1_24-Update.13.4.tar.gz patch.
thanks for your helpYou should be able to, but your best bet is to bring up a new VM on PI 1.3, and rehost the license. Then you can export the map's and import the map's on your new VM PI 1.3. If you try to downgrade, make sure you take a snapshot of the VM, so you can revert in case it doesn't work.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered" -
Issue with Prime Infra 2.1.1 and Nexus 7K
We have recently migrated from our NCS to Prime Infra 2.1.1. Since doing this we have started to import or switching gear into PI in addition to our WLC and MSE appliances. Discovery and inventory of the 3750X and 4500-X switches has been without issue. When we point PI 2.1.1 to a Nexus 7K running a VDC, the switch discovers as a Nexus 9500 instead of a 7K. Anyone else seen this happen? Any work arounds or suggestion on what might be going on? My thought was its discovering a VDC on the 7K and its not the admin VDC. That said our Admin VDC is not configured for SNMP and we wanted to discover the VDC's that we actually use for client traffic. I should note we have loaded the lastest available device pack to PI as well.
Please advise - any help would be greatly appreciated.
Thanks,
JeffWe ran a discovery of all our Nexus switching last night. Once we did that the patter was easy to see. Any 9 or 10 slot Nexus was fine, any 4-slot Nexus appears as a Nexus 9500 instead of a 7K. I checked the compatibility matrix (latest release through DP 6.0) and support for the 9/10/18 slot is listed. No mention of support for the 4 slot. I believe that is our issue.
Jeff -
Prime Infra: Add guest user to all WLC's
Hi all,
I have prime infra 2 running, with 2 WLC's v7.4
1 WLC has all the AP's, the other one sits in the same mobility group in case the first one fails (it has no joind AP's when acting as standby).
When I create a guest user in Prime Infra, it only gets created on the WLC with the AP's joined.
So WLC1 has the AP's WLC2 has none -> I create a guest user and it is added to WLC1
I do a failover, WLC1 has no AP's WLC2 has all the AP's, I create a new guest user, it is added only to WLC2
Is there a way that I can add a guest user, and it adds it to the 2 WLC's?
Thanks in advance!Did you install the application in /Applications? If so, then it's available to all users on that machine and they can add it to their Dock, or you can login to each account and add it to their Dock.
When creating new accounts, the template used is the one you get when you first create an account on a new Mac, and that was specified by Apple.
Mulder
If my answer helped solve your problem, please consider awarding some points. Why Reward Points?
iMac G4 700Mhz Mac OS X (10.3.9) -
Upgrading Prime system (Card Management System)
we have project for upgrading Prime system (Card Management System). As part of the business requirement, Prime system should update online Base24 with any cards updates (e.g. if new card is issued in prime, prime is to send this record to Base24 system at the same moment of the creation. If card status is changed in Prime to be lost or stolen, prime is to send this update to Base24).
Current version of Prime in QIB is working on Informix database. The upgraded version will work on Oracle database. TSYS (the vendor of prime) told that Prime is a back office application. It cannot and is not supposed to interface with any other systems. Hence, they told that there aren’t any way to online update any other system.
As new prime is working on Oracle database, we need your consultation if this online updates can be achieved through oracle by maybe triggering services or calls to Middleware services or API’s which can in turn update Base24 system.
Regards
IMTEYAZRAID won't be of a benefit unless you have two identical hard drives. It is possible to use two different ones, but there are performance/size issues.
The IDE2 and IDE3 ports support drives in a non-raid configuration.
Maybe you are looking for
-
Apple tv 3 airplay doesn't work properly on Itunes 10.6.1
So me and my dad recently bought the new apple tv and everything works fine except for a few things, he doesn't connect properly with Itunes so I can't use Airplay and Homesharing. Is there a solution for this? I've seen more discussions on the commu
-
Problem with installing Oracle 10g on Suse Linux
Hi everybody! I downloaded Oracle 10g Express from this url: http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html it is free version for developers. I copied it into computer where was installed Suse Linux Enterpris
-
Smart form printing issue with LOCL and SAP printer
Hi, The issues are as follows: 1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL) 2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when u
-
12 v 16 bit audio in same project
Despite my yelling and screaming, a couple of shooters I used for a recent project set their audio to 12 bit instead of the 16 bit I wanted. What do I do when it comes to importing the material and then trying to use it in a project where 90% is 16 b
-
CFmapItem "markerwindowcontent" how to add URL?
I'am using dynamic data from DB, but notice that unable to add hyperlink for my URL... <cfoutput query = "GetMapsData"> <cfmapitem address="#Latitude_ID#, #Longitude_ID#" markericon="markers/#category#.png" marke