Upgrade Processors from 1.8 ghz to 2.4 ghz of my Windows Hyper V 2012 R2 Host Server

If I get new processors, do I  need to re-install the Host OS, or can we power it down, swap them out, and we’re back in business with out issue on my guest machines?

Hi geoffcgt21,
I assume that the new CPU is same series with the old one .
So , you do not need to re-install the OS .
Also you may refer to the similar thread :
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4f71020e-504d-4a97-8c0f-aee1ca57fac1/windows-2003-server-can-i-change-cpu-without-reinstalling?forum=winservergen
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Can't connect to the Hyper-V manager after upgrading to Windows Hyper-V 2012 R2

    I have some Hyper-V server based on the free version (Windows Hyper-V 2012). I want to upgrade to the new version (Windows Hyper-V 2012 R2). So I begin to test it with
    an already working server (aka I was able to totally manager the server remotely without problem) and so upgrade it to the R2.
    After the upgrade, remote management and Hyper-V manager does not work anymore. So I redo my usual configuration steps (enable remote management, open firewall, uses
    latest hvremote.wsf, etc.). I was able to regain access to Computer Manager but not the Hyper-V manager which still can't connect at all. I can't access the Task Scheduler too without having a lot of XML error like "The task XML contains a value which
    is incorrectly formatted or out of range" (see below for screenshot).
    Is there a new step to do to be able to manage Hyper-V 2012 R2 from a Windows 7 computer?
    It's not a network problem as I can access RDP and MMC Computer Manager.
    To be sure the problem is coming from the R2, I have taken an old computer, install Windows Hyper-V 2012, do my usual configuration step, and
    tada: it works perfectly. I can access the Hyper-V manager from my client.
    Technical details:
    - Client is a Windows 7 SP1 x64 English member of a domain with latest RSAT (Windows6.1-KB958830-x64-RefreshPkg.msu).
    - Servers are in a workgroup (not a domain's member). And no, I can't add them to the same domain as the client.

    HI,
    Can we upgrade HyperV 2012 to hyper v 2012 R2.
    Thanks
    Atul

  • Upgrade Windows Hyper-v 2012 R1 core to windows Hyper-v 2012 R2 Core

    Hi all,
              is it possible to upgrade stand alone hyper-v 2012 R1 core server to hyper-v 2012 R2 core server?could anyone guide me the process of upgrading? I really appreciate your help. Thank u so much in advance.

    Hi D.sree charan,
    "A clean upgrade is safer, if you do not mind exporting and re-importing the VMs, or moving them all to another host, before the upgrade. On the other hand, with the upgrade cycle now faster than before, in-place upgrade makes sense as
    a way of keeping pace with little pain."
    For details please refer to following link  :
    http://www.itwriting.com/blog/7748-upgrading-hyper-v-server-2012-to-2012-r2.html
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Upgrade processor from dualcore to quadcore

    Hi all,
    it is possible to change processor from dualcore to quadcore wihout a change on my installation/configuration?
    It is possible to shutdown, change CPU and restart my server?
    Has anyone done this before?

    user2715945 wrote:
    it is possible to change processor from dualcore to quadcore wihout a change on my installation/configuration?
    It is possible to shutdown, change CPU and restart my server? Yes. However, it is wise to do (and test) a backup before doing any hardware change.
    Has anyone done this before?Yes. No issues. It's a good idea to review the initialization parameters before and after.

  • System crashing randomly after upgrading processor from Phenom 9600BE to 9950BE

    Few days ago I updated my processor from Phenom 9600 BE to 9950 BE. See all details about my system in my sig. Now the system is crashing randomly. I can quite figure out any pattern to it, but I think it may be due to temp. The 9600 was working quite steady at about 35C. The 9950 obviously will run at a higher temp. and it seems like it's running fine when I have my AC on in the room, which makes the processor temp on average about 45C. With the AC off, the room temp and humidity goes up but the processor temp doesn't exceed more than low 50ies C. Which should still be fine for that processor. So is it the board that doesn't handle the load of this processor? Or am I missing something else? The TLB fix in my BIOS is off, since it doesn't apply to this processor.
    Thanks.

    Quote from: Bas on 09-September-08, 22:53:44
    AMD uses JEDEC timings, not the dull EPP timings, those fail a lot (read about all the time) on AMD systems.
    ok, so I read some info on the JEDEC and EPP timings... and now I'm even more confused. So if the processor is not using EPP but JEDEC, then that's why the AUTO settings in BIOS set my timings to 5-5-5-12 right? That makes sense. In that case, it could be running at 1.8V - according to the SPD tab table, right?
    BUT:
    Is the JEDEC#3 comparable in performance to the EPP? Or is the processor using the JEDEC settings just so it's safe? In which case, I should be able to safely run it at 4-4-4-12 at 2.20V since this is manufacturer recommended default? Or is the manufacturer recommended default referring only to EPP, and for JEDEC it should be used as listed in the SPD tab table?
    And if i now decide to overclock the memory to 1066MHz (which I heard is possible), should I leave the settings at Auto or manually set them to 5-5-5-... something?

  • Upgrade Processor from T9400 to [QX9300 or X9100 or Q9100 or Q9000 or T9900]

    hello
    I have MacBook Pro (Fall 2008, Early 2009) - 15-inch with 2.53 GHz Processor Intel T9400 [http://ark.intel.com/Product.aspx?id=35562]
    and I would like to upgrade my processor of my MBP.
    so I have 5 CPUs, which one it will working with, and tell your recommendation
    1- Intel Core 2 Extreme Processor QX9300 [http://ark.intel.com/Product.aspx?id=36727]
    2- Intel Core 2 Extreme Processor X9100 [http://ark.intel.com/Product.aspx?id=35431]
    3- Intel Core 2 Quad Processor Q9100 [http://ark.intel.com/Product.aspx?id=37033]
    4- Intel Core 2 Quad Processor Q9000 [http://ark.intel.com/Product.aspx?id=40480]
    5- Intel Core 2 Duo Processor T9900 [http://ark.intel.com/Product.aspx?id=39312]
    I hope who have an experience and knowledge with a mac please tell what best one I choose.
    thank you...

    The CPU is soldered to the logic board.  As Retired Engineer indicated, there are no sockets.  As such, you would need to unsolder more than 450 pins simultaneously in order to remove the processor... as well as be able to re-solder all those pins.  Basically, it's impossible.

  • Upgrading Lightroom from ver. 5 to ver 6, I am running Windows 7 32-bits but I get Lightroom in a 64-bit version, also the second time I download

    I have just downloadet Lightroom ver. 6 to upgrade from ver. 5 on Windows 7 in 32-bit. The install tells me that it ned a 64-bit system. I have then downloadet ver. 6 again, and it stil demand a 64-bit machine.
    What can I do?
    Torben Aastrup, Denmark

    there is no 32bit version of LR6.
    Mylenium

  • Please help upgrade processor S10

    I have a lenovo s10 . can i upgrade processor from atom N270 to intel dual core 2GHZ ????
    it is not danger may net book  ????

    Hi,
    impossible mission...
    hardsoldered cpu... size...power consumption..
    thats a netbook not a notebook...
    most "books" are not designed to upgrade ... its not a pc, where you can easy change parts (also limited intel/amd/via not compatible) (heatspreader,powerful psu.)...
    many thing depends on each other...heat consumption (cooling system) power consumption...
    chipset...grafics...
    so the only things you can upgrade , and thats easy in case of S10 ... memory up to 2GB, harddrive (or SSD) up to 500GB (or more but bigger harddrive didnt see now) ... and with a little more experience faster wireless card (n) or bluetooth modul...
    sincerely KalvinKlein
    Message Edited by KalvinKlein on 06-24-2009 10:57 AM
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Errors Performing V2V Conversions from ESX 5.5 to Hyper-V 2012 R2 using SCVMM 2012 R2

    I've successfully added my vSphere server and 2 ESXi 5.5 hosts to my SCVMM 2012 R2 server.
    I have also added my 2 Hyper-V 2012 R2 hosts as well.
    When I attempt to do a V2V conversion of a VM from 1 of my ESX hosts to Hyper-V, I receive - "Error (2901) The operation did not complete successfully because of a parameter or call sequence that is not valid. The parameter is incorrect."
    When I go into the details of the job in VMM it shows "1.4 Convert VMDK to virtual hard disk - Failed" and "1.4.1 Deploy file (using HTTP) - Failed"
    Any help resolving this would be appreciated.
    Also, I can do V2V conversions using the same ESX and Hyper-V hosts without any issues using Microsoft Virtual Machine Converter 2.0, but my manager wants me to use VMM.
    Thanks!

    Quite honestly, building fresh on the platform and migrating the apps / services is always the best way to go
    PlateSpin was the last product I knew that had a Linux conversion utility.   Even found this:
    http://blogs.technet.com/b/enterprise_admin/archive/2010/04/26/hyper-v-linux-p2v-with-platespin.aspx
    No idea the current status of PlateSpin.  They were the gold standard back in 2008.
    But honestly, it can be painful.  It all depends on the hardware now.
    With Hyper-V the end boot device is IDE - so if the machine now runs on SCSI, the boot loader pointers need to be modified (if you can find a tool to bring the disk forward).
    Now, that said.  Hyper-V can convert a physical disk to VHD.  That is a stealth feature that has been there from the beginning.  I can't recall if it is block by block, or if the file system must be known for the copy to succeed.
    You mount the disk on the Hyper-V Server and create a new VHD from a physical disk.
    The biggest issue with the conversion utilities is that Windows does not know the Linux file systems.  So you need some Linux tool to do it.
    I know that VMware had a converter that handled Linux - but again, you have to manually fixup the hardware in the boot menu.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • Just upgraded an iMac with 4GB Memory and Intel Processor from 10.6.8 to Mavericks and Quicktime plays m4v files with stuttering audio

    I just upgraded an iMac with 4GB Memory and 3.33 Ghz  Intel Core Duo Processor from 10.6.8 to Mavericks.  I now have Quicktime 10.3 which plays m4v files with stuttering audio.  This is a nightmare as I use Quicktime a lot in my research.  I have seen similar threads but so far only reporting the problem.  For now I have installed Quicktime Player 10.7 (which appears in utilities, leaving Quicktime 10.3 in the main applications list) which plays the same videos with no problem, but it would be good to know if anyone has managed to find a workaround at all, or know if Apple have plans to do anything about it?

    Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
    Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.

  • Can I upgrade to an Intel core 2 Duo processor from my Intel core duo processor ? If so, what all must be replaced.

    Can I upgrade to an Intel core 2 Duo processor from my Intel core duo processor ? If so, what all must be replaced. imac
    <Edited by Host>

    No CPU upgrades possible.
    You should not post your serial number or other personal information in this forum.

  • HT1338 How do I update my macbook pro with 2.33 GHz Intel Core 2 Duo processors from OSX 10.5.8 to 10.7?

    How do I update my macbook pro with 2.33 GHz Intel Core 2 Duo processors from OSX 10.5.8 to 10.7?

    Firefox 16.0.2 was the last to work on the old Mac OSX 10.5.x as Firefox 17.0 to current has required OSX 10.6+
    https://www.mozilla.org/en-US/firefox/16.0/system-requirements/
    https://www.mozilla.org/en-US/firefox/17.0/system-requirements/

  • Upgrading L3000 N500 processor from PentiumDC to Core 2 or higher

    hello,
    Is it possible to upgrade or change the processor from Pentium Dual core to Core 2 or any with even faster processing speed?
    I have a L3000 N500 model of lenovo this time..
    Thanks!

    Fortunately IBM / Levovo are particularly helpful sharing info and you will be able to find the exploded views and assembly / dissassembly instructions on the support sites.  Some of the more basic core-2 chips are now very affordable, in the GBP20 range second hand, but there are many varients and you need to be sure of the socket (478 or 479), the power needs and BIOS support.
    You may find more help at Notebook Forums (http://www.notebookforums.com/forum144.html).
    As said it's a pretty tricky job and it might be easier to address other areas.  I've found the combination of Windows 7, Scorpio hard disk and 4GB DDR2 RAM gives very acceptble general performance on a Celeron M430 based 3000 C200.  Obviously it depends what you're doing!
    HTH
    Message Edited by pearce_jj on 02-16-2009 03:46 AM

  • HP Pavilion dv7t-7000 CTO Entertainment Notebook PC - Upgrade Processor

    Hello,
    Any help would be appreciated.
    I have an HP Pavilion dv7t-7000 CTO Entertainment Notebook PC.  Because of a new job I need to update my processor from the current 2.30 GHz (see exact specs below, please) to at least 3.0 GHz.
    Is there a 3.0GHz processor out there that is compatible with this particular computer? I've called technical support and was told they don't know. I really don't know who else to ask.
    This computer was just purchased a few months ago (before I got the new job). I would really like to avoid purchasing a new computer, if at all possible, if I can upgrade the processor in this one.
    Here are the specs of the current processor:
    Intel Core i7 3610QM
    Code Name    Ivy Bridge
    Package    Socket 988B rPGA
    Technology    22nm
    Specification    Intel Core i7-3610QM CPU @ 2.30GHz
    Thanks in advance.
    This question was solved.
    View Solution.

    Well, there appears to be just one (that I've found) 3.0 GHz processor that Intel makes for my chipset  (HM77 Express Chipset) and it's the i7-3940XM Extreme edition (http://ark.intel.com/products/71096/)
    At a retail price of $1,000+ it looks like I'm going shopping for a new computer. 
    Not sure if anyone from HP read the peer forums, however, I will not be purchasing another HP product.
    This machine has had issues outside of me needing to upgrade the processor for my own personal reasons. Your support is grossly lacking in all areas Your techscannot even pull up the model number with the serial number.
    Customers should not have to go out on the Internet to research questions like this.

  • I7 2.0GHz upto 3.2GHz or i7 2.9 Ghz upto 3.6 GHz processor

    2.9GHz Dual-core Intel Core i7, Turbo Boost up to 3.6GHz
    8GB 1600MHz DDR3 SDRAM — 2x4GB
    2.0GHz Intel Dual-Core Core i7, Turbo Boost up to 3.2GHz
    8GB 1600MHz DDR3L SDRAM
    The first one is a MacBook Pro. The second set of configurations is MacBook Air. I am personally not a fan of MacBook Pro. How much difference will these two processors make? 2.0 Ghz or 2.9 Ghz? All the other configuration is the same, so is the price. The only difference is these two processors. How much of an impact will the GHz make in this case?
     

    Well, I have a 2012 13 Inch Macbook Air with the 1.8GHz/4GB/128GB configuration and a 2011 13 Inch 2.4GHz Macbook Pro.
    I've always felt the Macbook Air being a faster machine because of the flash storage.  Once i've upgraded the the 13 Inch Macbook Pro to 16GB of RAM and 240GB Kingston Hyper X SSD - it's now up to par to my Macbook Air.
    You might not see a significant speed difference - the 2.0GHz Macbook Air might seem to be faster because of the flash storage as opposed to the 5400RPM hard drive of the Macbook Pro.
    If however, you check out everymac.com, you will see the difference between the two. the 2.9GHz is 1000 points ahead of the 2.0GHz Macbook Air.
    Click on either the Macbook Air or Macbook Pro and compare the geekbench scores and decide from there.
    As for myself - I prefer the Macbook Air for it's portability when I travel and when i'm not traveling, I use my Macbook Pro for the processing power.
    In any event, just make sure if you decide to go for the Macbook Air - just make sure you max it out if you're planning to keep it for a few years since RAM is not user upgreadable.
    Good luck

Maybe you are looking for