Upgrade Project - 4.7 to ECC 6.0
Hello Gurus,
I am HR Functional consultant and assigned to work on upgrade project (4.7 to ECC 6.0) for the first time. I am new to this environment. Can any one help me with suitable documents to start with. My mail id: [email protected]
Points assured..
Thanks in advance
Regards
kasi
Dear kasi raj,
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details
Similar Messages
-
Impact on Custom / Std IDOC after upgrading from 4.7 to ECC 6.0
I am in Upgrade project (4.7 to ECC 6.0).
What will be the impact of the existing Custom and Std IDOC after upgrading from 4.7 to ECC 6.0 and if any impact, what are precautionary steps to be taken to work as it is.
Will there be any Impact on ALE also ?
Thanks & Regards
Khaleelclosed.
-
New Development project in the middle of ECC EHP7 upgrade project
Hi All,
We are performing ECC EHP7 upgrade project in our project system landscape and i have already started Dev system upgrade.Suddenly our development team wants to perform new project which required to install add-on product from third party application. Installing new add-on will require us to regenerate stack.xml file right? if that is the case do we need to perform re upgrade to Dev right?. As per my knowledge this is not recommended to perform parallel project with upgrade project.
Is there any best practice or recommended method to perform multiple projects with upgrade project at the same time.
Thanks,
RaghuHi Raghu,
First here i would like to suggest you & your development team i.e during an upgrade project dual maintenance is required as per SUM guide,as per SUM guide you need to maintain parallel systems to perform regular activities, for same you could refer SUM guides and follow the standard procedures.
Installing new add-on will require us to regenerate stack.xml file right?
Yes you need to regenerate the stack.xml file .
if that is the case do we need to perform re upgrade to Dev right?
If you are under upgrade phase no need to perform re upgrade,required add on can be installed after completion of an upgrade as per availability for EHP7.
Try to avoid perform multiple projects with upgrade project .
Regards,
Gaurav -
4.6 C to ECC 6.0 Upgrade Project Timeline Sheet in MPP format
Dear all,
We are now proposing our customer for the 4.6c to ECC 6.0 Upgrade.
Our customer is currently in 4.6c/oracle 9i/HPUX 11 i. He wants to move to ECC 6.0.
If you have the project timeline for the above Technical Upgrade, can you pl send it to me.
If you don't have in MPP format atleast send me the Work Breakdown structure with timelines.
I shall modity the same to our customer and submit
Thanks & Regards
Senthil
[email protected]Preparation Phase* 6 days
Kick Off Meeting 1 day
Upgrade Project Procedures Preparation 1 day
Prepare Upgrade Project Plan 1 day
Technical Requirements Assessment 3 days
Assess Training needs of Key-users & End-users 1 day
Prepare Detailed Basis Activity List for DEV, QA & PRD 1 day
Business Blueprint Phase 6 days
Develop System Landscape Upgrade Plan 1 day
Functional Requirement Checklist 1 day
ABAP Development check list 1 day
Develop detailed Training Procedures & Documentation for Key Users & End Users 1 day
Identify Testing Scope & Scenarios 1 day
Identify Authorizations Conversion to Roles for SAP ECC 6.0 2 days
Develop Documents as per Basis Activity List 1 day
Develop Authorization Matrix for Activity Groups to Roles Conversion 2 days
Prepare Upgrade Deliverables Checklist 1 day
Realization Phase 28 days
Installation of Solution Manager 3.2 System 1 day
Creation of New Development System for Upgrade Project (Homogenous System Copy - PRD) 2 days
Upgrade to AIX & Oracle 10g, SAP ECC 6.0 on New Development Server 3 days
Upgrade Frontend Software 4 days
Perform SPAU & SPDD Corrections 5 days
Perform ABAP Development & Corrections 10 days Perform Authorizations Conversions and corrections after upgrade 8 days
Perform Upgrade Testing for each Application Module 7 days
Perform Unit & Integration Testing 6 days
Perform Training to Key Users & End Users (Generic & Specific) 3 days
Upgrade to AIX, Oracle 10g, SAP ECC 6.0 on Quality System 1 day
Homogenous System Copy of PRD to New Quality & Upgrade to AIX, Oracle 10g & SAP ECC 6.0 2 days Perform Testing in Quality System 3 days
Testing by end users on Quality System 1 day
Production Realization & Go-Live Phase 6 days
Upgrade to Production System Operating System to AIX (after close of business hours - 23:00) 1 day
Oracle Upgrade to 10g (after close of business hours - 23:00) 1 day
SAP Release Upgrade to ECC 6.0(Downtime Minimized - Downtime occurs in non-business hours) 2 days
User Acceptance Testing 1 day
Production System Go-Live 1 day
Post Go-Live Support 14 days
Post Go-Live Support 14 days Note: This is high level plan subject to change during Business Blue Print Phase 0 days
This is taken from a post in Ittoolbox, May be this is generic. Hope you can tailor this to meet your requirements. -
Data transfer form 4.7 to ECC 6.0 in upgradation project. How to do?
Hi Experts,
The client is going for an up-gradation from 4.7 to ECC 6.0. The entire data needs to be transferred from 4.7 to ECC 6.0. What is the best possible way to do this?
Please advise.
Regards,
TomeshHi ,
Going for an up-gradation from 4.7 to ECC 6.0. The data needs gets migrated from 4.7 to ECC 6.0.
SAP normally has defined better SAP functionalities in the new system .
In any upgrade project use Tcode SPDD. In this all the dictionary objects u2013 data elements, database tables and structures in the version 4.7 are compared with the upcoming new system.
All you need to do is the check whether the new change is suitable or not.You can make the modifications and then you need to make the migration of data, which can be automate.
the links for your reference.
Link:[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/304b9de6-f84f-2b10-94af-e5ff7461c18c]
link:[http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx]
Thanks & Regards,
link:[Lakshmi Narayana] -
Hi all
Can anyone please provide some guidance, if possible also send some documentation, which I can follow to work on a upgradation project.
Currently system is 4.7, and they want to upgrade to ECC 6.
What are the steps involved, what would be my role as FICO consultant, in such upgradation, because i have never worked on a upgradation project.
Any input will be highly appreciated.
Krishnahttp://solutionbrowser.erp.sap.fmpmedia.com/
http://service.sap.com/releasenotes
http://service.sap.com/upgrade
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
https://websmp104.sap-ag.de/instguides
SAP Business Suite App->SAP ERP -> SAP ERP 6.0 -
Interview questions on upgrades from 4.7 to ECC
Hi,
Can any one please post some potential areas/questions that will be asked for upgrade projects from 4.7 to ECC6.0
Points will be awarded.
ThanksHi Frank,
this is good question, why because sap upgrades from 4.6b to ecc 6.0 is very risky.
take one example , in 4.5b , me21n application having 620 screen where as in ecc 6.0 having 9000 screen . that time we will take care of it.
check the obsolete function modules , 4.5b , having ws_upload, ws_download.... use cl_gui_frontend_services , under these having differnt type of methods.
once you change the code in ecc , go to tranx : SLIN check the error where it is exact. -
How To Use SPDD and SPAU Transaction in An Upgrade Project
Hi Friends,
I will be working in an upgrade project very soon. this is my first experience for Upgrade project. Though I know these two transaction are used for Upgrade.
Can anyone give me a step by step document for using these two transactions and other relevant information.
Also, I have one query where do we use these transactions : On the old system e.g. R/3 4.7 or ECC 6.0
Thanks,
Pradeep
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 10:39 AMHi Pradeep,
For SPDD see this link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/2e/6d66587d9011d396b60000e82de14a/frameset.htm
For SPAU
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c8/61ec66e33611d1954b0000e82de14a/frameset.htm
Why you need this Adjustments
http://help.sap.com/erp2005_ehp_03/helpdata/EN/60/d6ba7bceda11d1953a0000e82de14a/frameset.htm
You use the transactions in the new system.
Regards -
Runtime Error in VL01N after upgrade from 4.6c to ECC 6.0
hi,
We are doing a upgrade project from 4.6c to ECC 6.0 and when we are running the VL01n tcode and as soon as we hit enter in easy access screen its throwing a runtime error as " The key of internal table "XLIPS" contains components of type 'X' or "XSTRING". The "READ TABLE XLIPS" statement is not permitted for such tables in a unicode context'. The xlips is declared as:
DATA: BEGIN OF XLIPS OCCURS 15.
INCLUDE STRUCTURE LIPSVB.
DATA: END OF XLIPS.
so i have checked the lipsvb structure in that i dont find the key fields of type X or XSTRING all are of type CHAR 4. this LIPSVB is the Reference structure for XLIPS and YLIPS.
THANKS IN ADVANCE.Please see the Patch level of the SD, FI ,etc...
and apply it the basis should find it out .... for ECC6.0 then minimum level of patches should be upgraded.
please ,login to help.sap.com ... there in the search see the document of the pateches for the ECC6.0 for SD & FI ... like wise for all Modules ....
Reward points if it is usefulll ...
Girish -
Upgrade -- Sort sequence difference in ECC 6.0 and 4.7
Hello friends,
We are in an upgrade project where the upgrade is from 4.7 version to ECC 6.0 version.
We are facing few problems on sort when testing our Z developments.
Suppose the internal table in the program has fields A, B and C.
We are using the sort statement --> sort itab by A.
In 4.7, the sort statement sorts the internal table first by A and there is no specific sequence followed for B or C.
Whereas in ECC 6.0, the sort happens by A followed by B and C.
So, the final result is, for the user, the output appears different, although the data is the same.
Please let me know how can we make the output in ECC 6.0 appear as in 4.7.
Thanks & Regards
SwapnilHello Swapnil,
Check for the SORT keyword in transaction abapdocu. You may see the changes made to the functionality in the newer versions.
Thank You,
Sai -
Runtime Error in MIGO after upgrade from 4.6c to ECC 6.0
hi,
We are doing a upgrade project from 4.6c to ECC 6.0 and when we are posting the MIGO a runtime error is occuring from the method
"IF_EX_MB_DOCUMENT_BADI~MB_DOCUMENT_BEFORE_UPDATE" which is
in the class "ZCL_IM_MMIM_STK_TRANSFER".
The error is as follows :
method IF_EX_MB_DOCUMENT_BADI~MB_DOCUMENT_BEFORE_UPDATE
>>>>>CALL FUNCTION 'Z_MM_STK_TSFR'
TABLES
T_XMKPF = XMKPF
T_XMSEG = XMSEG.
END METHOD.
the errror is showing at function 'Z_MM_STK_TSFR' .
I would be happy if anyone could give any inputs i hav also put chek in unicode in attributes in main program however still the error is arising.
thanks in advancehi,
thanks for the inputs i have done the syntax check on the main program and the FM the error which is coming is Field "ENJPREVIEW" is unknown. its neither in one of the specified tables nor defined by a DATA 'statement' . THis error is showing in the include LMEDRUCKF1K.
Thanks in advance -
Upgradation from 4.6C to ECC 6.0
Dear All,
I have worked on a upgrade project from 4.6C to ECC 6.0.
I am in the process of maintaining documents for the project. I am just planning to maintain a repository for all the relevant documents.
I feel that it will act as a useful document for all the consultants involved in upgradation.
Right now I am engaged in documenting the issues involved with upgradation- Technical and Functional.
I will collate all the docs and send a copy to all the major contributors. Your contribution is solicited
Regards,
RakeshDear Rakesh,
Hi, I am Albert from Philippines, and is involved in the 4.6C to ECC6 upgrade as of this writing.
I am new to SAP--my first two posts here might sound silly to most SAP gurus
I would appreciate if you could send your documents on the upgrade. Those will really help me.
Thank you very much in advance.
Regards,
Albert
Edited by: Albert Joseph Canceran on Feb 8, 2008 12:24 PM
Edited by: Albert Joseph Canceran on Feb 8, 2008 12:25 PM
Pls email them to me at [email protected] -
Upgrade from 4.0B to ECC 6.0
Hi
I have few questions related to upgradation from 4.0B to ECC 6.0 (wrt HR)
To wat extent it is possible, if yes then how simple or difficult it is ?
Time Factor (Duration)? ?(assuming the size of the company close to 1000)
Do we have any set of standard procedures and guidelines that are to be followed ?
any helpfull documents to understand the process?
Thanks in advance..
Regards
RaoRao,
My new project is upgrade project from 4.0B to ECC 6.0 in MM/IM/WM area,
I have to give an estimate of duration to complete this project.
Have you started your project. how is it going? how long the project? and any other useful documents please pass on "[email protected]" -
Text Determination Error in Upgrade Project
Hi All,
I am working on Upgrade Project from 4.6C to ECC 6
I encountered the error like the Text Determination is missing in all the Documents like Sales Order, Delviery and Billing Documents in ECC6.
But the same is appearing in 4.6 C.
I am getting the error " Error in Text Formating ".
Message No.VX201.
Could you please give your valuable inputs on this.Hi,
Check the settings again in 6.0. Follow the path IMG-sales and distBasic Func--Text Control. It may that while migrating the data certain tax type is found missing in the new system.
Regards,
Saurabh -
Cutover Activities for Upgrade Project
Experts
What are the cutover support activities for the administration of the ECC 6.0 (SAP) upgrade project. Also please do let me know how to prepare cutover strategy , and how do we develp cutover plans.
Regards,
MaheshHi,
Check this thread.
CutOver activities in BI7.0 while doing production upgrade BI7.0 FromBW3.x
Regards.
Maybe you are looking for
-
Downloading podcast error message
I am unable to download any free podcasts. I subscribe successfully, but when I click "Get" a grey exclamation point appears immediately. The error message is "There was a problem downloading "the podcast" . The required folder cannot be found. Pleas
-
Trying to gt my computer to move faster i deleted microsoft internet explorer an in order to get my computer to let me on the internet i had to download firefox when i did this i started receiving a message that said Extentsion helper has encountered
-
[SOLVED]CUDA Toolkit and SDK
Hey All, I've been working with CUDA on arch for quite a while now and maybe I'm slow or impatient, but I have a few simple questions. I CANNOT for the life of me find the Visual Profiler (which is claimed to be in 3.1 which is in the AUR). Can anyon
-
How do I view mov files in my iPad2
I have taken some hd videos and have some mov files that I want to view on my iPad2. I downloaded the files in my ipad2 and the file shows as a mov file but I can not open them. What is the best option to view these files in the ipad2.
-
Téléchargement impossible à partir d'ADOBE LWS
Bonjour, Ayant reçu des mails m'informant de mises à jour, je me suis connecté à ADOBE LWS. Je souhaite télécharger les produits dont j'ai les licences. Ok pour Lightroom et pour CS6 Mac, j'ai pu télécharger. Par contre, pour CS6 Win ou pour Première