Upgrade Question CS3, (instaled once)

I have located a person who bought a CS3 upgrade, not realizing it was an upgrade. He has said the store would not take it back because he had tried to install it. He now wants to sell it so he can use the money to put towards the full version.
If he tried to install the upgrade, is it registered during that process, even if he had to stop at the point Adobe asked for proof of a previous version?
I'm wondering if I buy this if we will have to go through the whole transfer "transfer of ownership" process?

it registers after the install, where you give it a whole bunch of info like your name and address. if he didn't do that, he probably didn't register. you can call adobe and confirm it by giving them the serial number. if they say it's not registered, there'd be no reason to go through the transfer (imo).

Similar Messages

Simple upgrade question : CS3 to CS5

Which serial number do i pop into the box?...okokok, I'm overtired, maybe this is obvious...
Do I use the one that came on the CS5 upgrade package?...will that read my last version of photoshop and just install?...
Do I use the SN that came on my upgrade version of CS3?...
thanks
M
ps...I'm just trying to avoid the upgrade mini-nightmare I had when I installed CS3...an hour on the phone with people in india, one who had no clue what she was talking about, heavy accents leading to even more difficult communication...I really don't want to go through that again...

Hi,
Do you mean you are trying to upgrade from CS3 to CS5???
1> yes you can upgrade
2> if you have CS5 upgrade cop, in order to install you need to have obviously CS5 Srial Number + CS3 Serial Number and while installing CS5 that will take you to upgrade check as soon as you enter CS5 Serial Number. if you do not have CS3 serial number then you will have to contact Adobe for unlocking your CS5.
Hope this helps..!

Upgrade question CS3 E to CS5 E

Has anyone else noticed that CS3 Extended shows up as an eligibility in the chart for CS5 extended but doesn't show up on a version to select in the pre-order cart?
Here's the question. I know it's eligible but since it's not listed and the documentation says to be sure to pick the correct upgrade path to get the correct installer...would that mean to select Photoshop CS2, CS3, CS4 or go with CS4 Extended since CS3 Extended is placed in the same slot in the upgrade eligibility chart with CS4 Extended. To me it makes sense that it would be CS4 Extended but thought I'd ask if anyone else knows for a certainty.
I checked the cart for Photoshop CS5 standard and CS3 Extended is listed in cart for in the same version slot as CS4 Extended.

I take that to mean that I can check the upgrade that says from Photoshop CS3 to CS5 Extended. The fact that I have CS3 Extended shouldn't matter...same price anyway was just confused that CS4 Extended had it's own upgrade path while CS3 Extended wasn't listed.

Install CS4 upgrade without CS3 installed?

Hello,
I'm moving all my production software from XP pro SP3 to a new Vista Untimate SP1 machine. Nothing is installed on the Vista yet, I just received my CS4 production prem upgrade suite, can I just install CS4 on the Vista machine without installing CS3 first since this is an upgrade version?
thanks.
Don

I have installed the cs4 upgrade but it requested for my cs3 serial #. Now I don't know if the cs3 is still useful or I can' t install it on another coputer again . Or will I still need it in the future parhaps my coputer crached and I want to reinstall all the soft ware. Will I need cs3 again before I can install cs4 upgrade.
Thanks, Emma

Upgrade Question CS3 win to CS4 Mac

With Photoshop CS3 working on the backside of a Mac with Parallels II can it be upgraded to Photoshop CS4 for Mac to operate on the front side (Mac side)

Yes. It is called a cross-grade and as far as I know it must be done directly through Adobe sales. There is a process to go through including a letter of destruction which usually entails you sending back the other copy to them or giving them something back proving the destruction process.
After that you get a full version disc for the upgrade price because you cannot use an upgrade version to cross-grade since the Mac serials are different than Windows serials.
Contact Adobe sales this week when they are back in the office for full details.

Instaling upgrade for CS3 and adobe RAW

Real newbie question here:
I have CS3 installed on my windows XP computer. It is notinternet capable, have second online computer for that purpose. I only have RAW version 4.0 on my PS3 program purchased several years ago. I have downloaded the upgrade for RAW 4.6 on my internet computer and with a CF card have moved the file over to my other computer where PS3 resides. The file has been unzipped and is on my desktop in that computer at the moment. Now what do I do with the file? Where do I put this upgrade so that it will be put into effect with my PS and adobe RAW program. Obviously I have a very limited knowledge of computers and this is the first time I have ever downloaded any sort of plug in to be put into practise. Any help that someone could give me would be very much appreciated.
Thanks, in advance
Mike Hannam

On the Camera Raw 4.6 downloads page there's a link to Camera Raw 4.6 ReadMe pdf file that provides manual installation instructions. Camera Raw 4.6 page: <www.adobe.com/support/downloads/detail.jsp?ftpID=4040> Here's the part you need: Manual installation Windows 1. Exit Photoshop CS3 and Adobe Bridge. 2. Open My Computer. 3. Double-click Local Disk (C:). 4. Navigate to Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats. 5. Move the existing Camera Raw.8bi plug-in to another location (for example, a new folder on your desktop). Ensure you keep this version in case you need to revert back. 6. Copy the Camera Raw plug-in, Camera Raw.8bi, from the download into the same folder as Step 4. 7. Launch Photoshop CS3 or Adobe Bridge. There is a separate Camera Raw forum, should you have more questions after installing 4.6.

CS2, CS3 & CS4 upgrade questions

Is it possible to have both CS2 and CS3 installed and functional on the same Windows machine at the same time? Same question with CS3 and CS4 and, if it can be done, are there any known issues that result?
I need to migrate our graphics station to the newer CS3 (and eventually CS4 ... probably around the time CS10 is released), but I can't afford to lose access to projects during the much slower than normal process of getting the newer version fully ready to go (i.e., all plugins and the many custom files they use within my projects accessible by the newer version). Sorry for the 101 question ... I work in corporate video now and our facilities are way behind the curve so I have now become that way too.

As Navarro said: Should be no problem. Be aware, though, that several of the "Edit original" and "Open in Bridge" type functions will always resort to the most modern version and these functions thus will not work fully in older versions. If e.g. you chose to "Browse Presets" in AE CS3 with CS4 already on your system, it would open Bridge CS4 and you would be able to view the presets, but could not apply them with a double-click as you would otherwise. Also expect some confusion when working with MPEG stuff. You may get warnings about missing CoDecs in Encore and Premiere or weird licensing warnings ("not included in trial version" and such...)
Mylenium

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?\

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data? How can I fix the problem? Thanks

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

Getting really frustrated! I bought Photoshop 7, upgaded to CS2 then upgraded to CS3, now I have had computer problems and looks like both are now gone, they were not de-installed. I have limited bandwidth (I live int he country) and need a new box versio

I bought Photoshop 7, upgraded to CS2 then upgraded to CS3. I live in the country and have limited bandwidth for my internet, therefore, the cloud will not work and I must have a box version. In Jan Best Buy did work on my laptop and did not de-install CS3, now my desktop has died and believe CS3 on it is also gone. I have the serial numbers and can not find how to contact Adobe.
I only use it for photography and do not want CS6, so I need help, can anyone help me. Thanks a million.

Why on Earth are you getting frustrated? ?? !!
You don't even need to "contact Adobe", unless you need to activate that old deleted version. You are entitled to two activations.
Just download the CS3 trial version and input your serial numbers (the installer might prompt you for the previous serial number since your CS3 probably has an update s/n).
Download CS3 products <=== click on link
Anytime you want to look for something on the Adobe site, just do a Google search and add "site:adobe.com" (without the quotes) at the end of the string of keywords, for instance, this what to type in Google to find the CS3 downloads:
download Photoshop cs3 site:adobe.com
Just change "CS3" for whatever version you want.
Using the Adobe web site search function is futile.
Now, if you had two activations already, just call customer service and they will deactivate one or both for you—after quickly verifying your registration.. No big deal.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option.
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

Question: Upgrade from CS3 to CS5 with license from diff country

Hi all,
I'm thinking of upgrading my CS3 to CS5, but the CS3 license is bought from another country. So am I able to upgrade my CS3 to CS5 where CS3 is purchase in Asia Pacific and CS5 is purchase in US?
Hope can get answer soon, I'm urgently need to upgrade it but I dont want to purchase upgrade that wont work.
Thanks!
-- SU

Please contact Adobe Customer Support directly by phone. This is a User-to-User forum and no one here is qualified to authoritatively answer your question.
- Dov

CS3 to CS5 upgrade - can't install CS3 on new mac first

I originally purchased CS3 years ago, then upgraded to CS5. Today, I purchased a new Mac OS X 10.10 and it says I need to first install the CS3 and then go through the upgrade again. Problem is that it will not install CS3 because it is not supported on the new operating system. So what to do?

There is no need to re-install CS3.
All installers (full and upgrades) contain the full program code. The serial number tells the installer if it's a full version or an upgrade.
Just install CS5, enter the CS5 upgrade serial number then the CS3 serial number when prompted.

Upgrade from cs3 to 6 do we need a full install?

do we need a full install or can we use an upgrade

can you point me in the right direction for pricing / upgrade options?
Date: Tue, 26 Jun 2012 08:33:14 -0600
From: [email protected]
To: [email protected]
Subject: upgrade from cs3 to 6 do we need a full install?
Re: upgrade from cs3 to 6 do we need a full install? created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
No, you only need the upgrade package. It will ask for the previous serial and then install the full version.
Mylenium
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4521187#4521187
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4521187#4521187. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Can't install cs5 upgrade to cs3 on mavericks

I have cc subscription on my mbp2.5ghi5 2011 16gb/750SSD with 420 free. I tried to put my cs5 upgrade on the machine so that I could work with a new client who needs work in cs5. I couldn't install so I put cs3 back on the machine to give the upgrade software to " find". Still can't upgrade. I am running 10.9.2. CS3 installed fine, works ok, just put it there to get the cs5 on, and I can't get the upgrade installer to work. I can't wipe the 750SSd just for the sake of putting cs5 on temporarily, I need all the cs6 and cc software to keep working. I can't use the cleaner because it will damage the software I now have on there. Any ideas?

I am posting a screenshot.
Now matter how many times I restart, I get this message. i am in the administrator account. As a test, I tried installing on a 2009 mac pro with a traditional sata drive, and it installed without incident. Remember, I can't wipe my 750 ssd drive, I have too much invested in it and on it and I can't take the weeks to get the adobe cc suite working again.
Is there a reason it won't install on an ssd drive?

How install premiere cs6 upgrade with premiere cs3 installed and not recognized

I have a Windows 7 integrale 64bits computer.
I installed Premiere pro CS3 (upgrade from cs2)
It run OK but refused activation (the Adobe Support told me this is due to CS3 uncompatibility with Windows 7).
Then I tried to install Premiere C6 as upgrade from CS3.
But the install program doesn't recognize the CS3 previous install and asks for old serial number. I check "upgrade from cs3" then enter the previous CS3 serial number. CS6 install refuses it. So I can't install it.Thanks for help.

Premiere never "looks" for an older version on the system when installing an upgrade, and in fact, the best thing to do is completely uninstall any old version before upgrading. Also, you should run the "Adobe Cleaner" utility to remove any remnants of old software before new install. Only an older serial is needed for an upgrade, but of course must meet version requirements.
http://www.adobe.com/support/contact/cscleanertool.html
If you cannot get Premiere to install, please contact Adobe support as recommended
Thanks
Jeff Pulera
Safe Harbor Computers

Question about CS5 Upgrade from CS3

Hi everyone,
I have Adobe CS3 and want to upgrade to CS5. I noticed Staples are selling the CS5 upgrade version for a decent price.
But it doesn't state if it's for CS4 or CS3/CS2. I contacted them, but they said they are both the same.... but I don't know if I can believe them.
Is the upgrade version for CS4 and CS3/CS2 the same thing in retail outlets? (i.e. you can enter in a CS4, CS3, and CS2 serial number for the same disc or is there separate products for each previous version - i.e. CS4 upgrade is different than a CS3 upgrade?)
I noticed when you buy it from the Adobe Store or even other sites like Newegg, they are marked as 'CS4 Upgrade' and 'CS3/CS2 Upgrade'... but on Staples its only 'Upgrade' and they told me it 'probably works for CS3 as well'.
Link to product on Staples site: http://www.staples.ca/ENG/Catalog/cat_sku.asp?CatIds=&webid=885931&affixedcode=WWhttp://www.staples.ca/ENG/Catalog/cat_sku.asp?webid=885938&CatIds=&AffixedCode=WW
Your help is greatly appeciated!
Thanks!
J

The upgrades are different in that they require different serial numbers for the upgrade. I don't believe you can use the CS 4 upgrade if you only have CS3. Call Customer Service to get an official response.

Upgrade Question CS3, (instaled once)

Similar Messages

Maybe you are looking for