Upgrade R11.5.10 to R12.1.3-- please share your experience
Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advance
user13648035 wrote:
Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advancePlease see old threads for similar discussion -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+11+to+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein
Similar Messages
-
Hi,
In our company various versions (V7, R8.1 and R8.3) of Primavera being used in various locations. To bring all the location to a common platform, management has decided to implement / upgrade Primavera EPPM P6 R8.3 and also planned to integrate Primavera P6 R8.3 EPPM with Oracle (EBS) Projects application . Hence, If any of you implemented Primavera P6 EPPM R8.3 or upgraded the earlier versions to Primavera P6 R8.3. Please share your ideas and also the pros and cons of implementing R 8.3 EPPM. For your information we are going to have SQL database since all the existing databases are in SQL.
Please share your ideas and experiences.Hi,
we have done a lot of implementations and migrations to the P6 EPPM R8.3 from different former versions and this is working fine. the dbsetup does a good job.
A good way in my point of view is to set up a new P6 EPPM R8.3 system with a new PMDB Instance which will keep the configurations so that you easily can migrate or exchange the instances. Always remind to have a validated backup of any instance before migrating.
Before migration you should mind the following points:
The source version of the old P6 PMDB instance is:
P6.2.1 or before => first you need to migrate it to P6 V7.0 before you can migrate it to P6 R8.3
P6 V7.0 => check if you have used P6 WebAccess: if not okay, else check if you used jackrabbit (look for migration tool), Workflows (close all before migrating); Check if using Jobservice XER-Export (no longer available); Jobservice Batchreport (only Workaround available see Knowledgebase); Risks in the P6 Client (need to be manually migrated)
P6 R8.0 to R8.2 => Using Extended Schema, Enterprise Reporting Database, own BI Publisher Reports => Check stept to be taken for migration
Other questions are:
Which authentication method will you use (native, LDAP, SSO)? If not using native and you want to connect the BI Publisher then you need also to use that authentication there.
The migration itself is pretty easy if you take care that all sessions are closed (no users or unclosed primavera sessions settings on that instance, stop all Applications, interfaces or Services connected to the instance. Cleanup your refrdel_deletes, logical_deletes and (if used before), extended Schema tables.
Then you can migrate with dbsetup, use additional Service Packs and Fixpacks (actually Service Pack 1) on the instances and then you can connect them into the environment by adding it to the P6 Configuration.
I mentioned you don't want to put all data into one final PMDB-Instance.
Regards,
Daniel -
Upgrading R11.5.10 to R12.1.2 - impact on XML Gateway and OTA
Hello,
We are testing upgrade of R11.5.10 to R12.1.2 and its impact on XML Gateway and OTA. We have all working well, but not the OTA.
Outbound:
The messagess are present in the ECX_OUTBOUND queues but are not send out.
Inbound:
Inbound endpoint https://server.com/servlets/oracle.apps.ecx.oxta.ECXOTAInbound returns not found or R12
Testing https://server.com/OA_HTML/US/ECXOTAPing.htm results in redirection to
https://server.com/webservices/TransportAgentServer and that returns not found
https://server.com/OA_HTML/US/ECXOTAInbound.htm displays only information about redirection and it redirects
to https://server.com/webservices/ECXOTAInbound and it is also not found
Results of:
SQL> @$ECX_TOP/patch/115/sql/ecxver.sql
ECX_UTL_XSLT_DIR Profile :
/usr/tmp
ECX_OAG_LOGICALID Profile :
ECX_SERVER_TIMEZONE Profile:
ECX_SYS_ADMIN_EMAIL Profile:
[email protected]
ECX_XML_VALIDATE_FLAG Profile: Y
ECX_XML_MAXIMUM_SIZE Profile : 2000000
utl_file_dir :
/ORACLE/DB/admin/tmp
Oracle XML Developers Kit 11.1.0.7.0 - Production
Parser Version Ok
XML Gateway Status Summary
XML Parser Version OK
All ECX Objects Valid? OK
All XML Parser Objects Valid? OK
OTA Running? N/A*
Total Messages on Outbound Queue 9
OTA Msgs on Outbound Queue 8
Others Msgs on Outbound Queue 1
Messages on Inbound Queue 0
*Please use the ECXOTAPing.html as described in the Testing Oracle Transport
Agent section of the User's Guide
End of Summary
Service Component Control Event Subscriptions
EVENT_NAME RULE_FUNCTION OUT_AGENT STATUS
oracle.apps.ecx.inbound.message.process [email protected] Not Defined ENABLED
oracle.apps.ecx.inbound.message.process [email protected] Not Defined ENABLED
oracle.apps.ecx.inbound.message.process [email protected] Not Defined ENABLED
oracle.apps.ecx.inbound.message.receive [email protected] Not Defined ENABLED
oracle.apps.ecx.inbound.message.receive [email protected] Not Defined ENABLED
oracle.apps.ecx.inbound.message.receive [email protected] Not Defined ENABLED
oracle.apps.ecx.inbound.message.receive [email protected]COMNot Defined ENABLED
oracle.apps.ecx.inbound.message.receive [email protected]COMNot Defined ENABLED
oracle.apps.ecx.processing.message.callb [email protected] Not Defined ENABLED
ack
oracle.apps.ecx.processing.message.error [email protected] Not Defined ENABLED
oracle.apps.ecx.processing.message.error [email protected] Not Defined ENABLED
oracle.apps.ecx.processing.message.error [email protected] Not Defined ENABLED
oracle.apps.ecx.processing.message.error [email protected]SERVER.COM Not Defined ENABLED
oracle.apps.ecx.processing.notification.send [email protected] Not Defined ENABLED
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Thank you in adavance for your help,Hi,
Run the diagnostics script in (Note: 732295.1 - R12.0.6+ : Oracle Application Object Library XML Gateway Engine Setup Test) and see if it returns any error/warning messages.
Regards,
Hussein -
If you've "upgraded" from EA6500 to EA6900 please share your results
I have have had EA6500 Version 1 for 15 months. It is getting a bit long in the tooth. (Hardware reset button no longer works, software UI reboot function does not work), unit will stop working once a week or two and require a 30 minute power disconnect to reset.)
Any pros, cons, happiness or regrets?
Thanks.I have have had EA6500 Version 1 for 15 months. It is getting a bit long in the tooth. (Hardware reset button no longer works, software UI reboot function does not work), unit will stop working once a week or two and require a 30 minute power disconnect to reset.)
Any pros, cons, happiness or regrets?
Thanks. -
Need to share the experience of upgrading to win 7
Does anyone successfully upgrade your system from Vista to Win 7? I really need your help to share your experience on that. The instruction came with upgrade CD is too complicated for me. It requires me to uninstall some applications, but I couldn't find the drivers of those app from lenovo website.
SOS!Hi,
http://gnanamax.com/Documents/BI%207.0%20Functional%20Upgrade%20-%20Migration%20points.pdf
http://vinaysapbw.blogspot.com/2007/11/differences-between-bw-35-and-bi-70.html
https://wiki.sdn.sap.com/wiki/x/JYk
http://www.service.sap.com/instguides
https://forums.sdn.sap.com/click.jspa?searchID=6084944&messageID=3148221
https://forums.sdn.sap.com/click.jspa?searchID=6084944&messageID=3592560
Hope this helps you
Reward if it useful,
Regards,
Jack -
R12 upgrade issue:Not able to login using forms:Please help****urgent
We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
Any help to resolve this issue will be appreciated.Duplicate thread ...
R12 upgrade issue:Not able to login to forms**please help
Re: R12 upgrade issue:Not able to login to forms**please help -
OBIEE 11G Implemented - Upgrading Oracle EBS 11g to R12
We have OBIEE 11G implemented and are currently sourcing the data from Oracle EBS 11g. We are upgrading our source database to R12 and need to know the impact on our Informatica mappings. Can anyone point me to some documentation, or have leave some helpful hints on how to proceed with this project. Thanks.
Hello,
I assume you are using BI APPS, there shouldn't be any impact on informatica mappings. Informatica comes with prebuit adapters for EBS 12 version, you need to use ORAR12 adapter. -
HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.
I suggest you try the very clean and very forceful AutoLoader method:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.
The first one, my private home email, works fine. With the other 3, I get the message "Cannot get mail: The connection to the server failed"
All were working fine before the 8.3 upgrade. I did try the old trick of making one minor change on the account and resaving, but that did not change anything. I even deleted my work account and re-entered it from scratch, but again, sadly, no luck. For the time being, I am successfully getting the email via IMAP, but this ***** compared to exchange. Anyone have any idea what is happening or if a fix is in the works?Well, the one set up on exchange 2k3 is now working fine, although no changes were made on either the iPhone or the exchange side, so that's fun, but it still is throwing errors when connecting to the other 2 exchange accounts. The common elements are that both non-functioning exchange accounts are google apps for business accounts. So is one of the ones that's working, by the way. The settings on both accounts are the same as the one that's working, and both worked fine before the 8.3 upgrade. I have no issue accessing both of these accounts on my ipad which is currently on 8.2.x. If it's not the iphone OS at fault, I'm at a loss as to what it could be.
-
Unable to find bootcamp after upgrade tp Mac OS X 10.6.8, please help.
you problem is in OS X (guessing here)
Guess #2: you use an NTFS driver in Mac OS X
Try OS X forum? No?
When you do reboot into Windows - use Option key for one - and go to Windows Control Panel: Boot Camp: the Startup Disk section to change the default OS is there and works.
It isn't "boot camp" it is Windows. Boot Camp are drivers, control panel, program to partition. What you wanted to see was "Windows" OS to change the default.
Do you 'see' Windows volume on the Desktop as being physically there?
Opened Disk Utility and look at the drives and volumes: Windows volumne is still present. -
Adobe flash player doesn't support OSX10.5.8 , and i can't watch any video. Please advice? Do i need to upgrade ? or any application to replace?
Please HELP.... million thanks!Do you have a PPC G5 Mac or an Intel Mac?
-
What has been your experience upgrading from Mac OS X 10.6.8 ti 10.7 or 10.8?
my story was indeed a horror story
Mavericks is not an upgrade of previous OSes, but rather a port of iOS
If you want your computer to function like an iPad, go for it.
Snow Leopard on the other hand is a full-featured and stable OS - the best of them in my opinion.
Mavericks makes it easier to port Pages and Numbers documents back and forth between your computer and your iPad - but this portability comes at the price of many, many lost features in both programs. Over 100 lost features in Pages. Don't know how many for Numbers, but because of lost functionality you risk losing data (if you used Footers and Headers, Page View, etc.).
It is possible to use the older version of iWork under Mavericks, but it is a real pain as Mavericks keeps trying to default you to the newer versions. Even accidentally opening with the newer version and not saving changes can cause the file identifier to be altered making it no longer open under the older version (I did find a way to force open) Deleting the newer versions from your system results in Mavericks nagging you on a daily basis to reinstall them. There is no option to say No, only the option to postpone for one day.
the OS itself is much less customizable, I found it much harder to use with older eyesight because I couldn't highlight my scroll bars, or change the colour of certain files in a list, etc. Anywhere I went to Preferences I was struck by how few of them there were - less than half as many as Snow Leopard, in some cases less than 25%. Again, I had used those missing Preferences.
Mavericks also takes away many of the abilities of iTunes to sync with your iPad or iPhone and forces you to use iCloud to do much of the synching. If you don't want to use iCloud, or if you have confidentiality issues that prevent you from using it - you are out of luck.
In the end I found Mavericks unusable. The process of reverting back to Snow Leopard required 5 hours with 2 different geniuses at the Apple Store, 2 deep wipes of my computer and fresh install of Snow Leopard. And some loss of settings and data.
If you choose to go for it, then make a bootable backup first. Some sources suggest making 2 backups.
There are people who are happy with Mavericks, but I am not one of them.
Since I had my misadventure they have made some improvements to Mavericks, but not nearly enough of them to tempt me back. For example, you cannot set your old Pages and Numbers documents to 'always open' with the older version of the software ... or rather you can set them to, but Mavericks will immediately revert it back to the new version. -
Hello, I have iphone 4. After upgrade ios 7.0.2 lost vibro. Please, can you help me?
RichardRicardo wrote:
I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.
Sorry... But... The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.
There is No Workaroud for Activation Lock. -
iPhoto v9.3.2 => v9.4.2
I feel it unfair and unjustifiable to charge for an upgrade of a pre-installed iphoto programme. Please refer to the above version.
This will result in payment on your very bad App Store of £10+
Extremely unhappy loyal Mac user!!!!!!iPhoto v9.3.2 => v9.4.2
Thank you for your response but in App Store it shows a price of £10+ for this down load.
(This is a free update. Contact with Mac App Store support > http://www.apple.com/support/mac/app-store/contact)
Perhaps you are correct but this is not made clear in the update window of this App Store. -
Is there an upgrade on 4.2.1 on G3? Please!
My son gave me his G3 when He went to latest iphone. Any tips on wifi that will not allow 25 ft away from great router after all apple directions done?
dennisfromok wote:
Is there an upgrade on 4.2.1 on G3? Please!
No, iOS 4.2.1 is the end of the line for the iPhone 3G.
Maybe you are looking for
-
How can i get the path to config folder placed inside the jar file?
Hi i have developed an RCP application using eclipse. In my application config directory is there. When i export my RCP application as JNLP Project the jar file is created which contains config folder inside it. When i download the application using
-
I'm having trouble with Mail.app crashing when I try to set it up to use my gmail account. It is able to do the little mail wizard dialog, is able to log into gmail fine, and sets up the account. Then mail crashes. So, I tried setting it up on a diff
-
Connecting my iPod to my Car's 30-pin Dock but Being Able to Control It from Within the iPod?
I have a 5th Generation iPod nano. I own a 2008 VW Eos which has a 30-pin dock. It functions but, my car's UI for iPod is nefastous. I wanted to know if there was a way to control the music within the iPod.
-
Hi ! We have this user SAP_WSRT in our PI system. Our PI system is connected to CUA. This particular user has somehow been created as a local user in PI & refuses to move to CUA (even after deleting & re-connecting CUA). SCUG does not show this user
-
We have extended classic scenario in the system. The SC is approved but not converting to PO. Error in SC: 286 Purchase order does not correspond to setting for extended class.scenario Also, when we try to convert the PO using FM: BBP_REQREQ_TRANSFER