Upgrade RAC from 9.2.0.6 to 9.2.0.8

Hello All,
I need to upgrade our oracle RAC from 9.2.0.6 to 9.2.0.8.
is there any document could help me on that?
platform is windows server 2003
Best Regards,

Dear Sayed,
you are right, but the instructions is not in details, i mean it is not specific for rac. What i am looking for some document only for upgrading RAC environments.
Regards,

Similar Messages

Questions in upgrade RAC from 11.2.0.1 to 11.2.0.2

I am new in installing RAC and need help in upgrade RAC from 11.2.0.1 to 11.2.0.2.
We have a 3 node RAC of 11.2.0.1 on refhat 5.2, and are planing to upgrade to 11.2.0.2. We are doing out-of-place upgrade. For our single instance DEV environment, it works pretty well that we install 11.2.0.2 and copy data from the old database, and then shutdown the old one.
On the production RAC, I hope to install 11.2.0.2 on one node, and let it join the RAC with the other two nodes. Then do th same to the 2nd and 3rd node. I have the following questions.
1) For Out-of Place upgrade, should I just follow normal installation to install grid infrastructure and then the RAC?
2) In selecting Installation type should I choose Create and COnfigure database, or Upgrade an Existing Database?
3) What should I do with the ASM? I want to use the existing ASM.
4) Can I out-of place upgrade one node, and make it join the RAC, and then roll to another node, or I have to install 11.2.0.2 on all 3 nodes and configure a new RAC to replace the old RAC.
5) What should I do with ocr and voting disks?
Thanks

We have a 3 node RAC of 11.2.0.1 on refhat 5.2, and are planing to upgrade to 11.2.0.2. We are doing out-of-place upgrade. For our single instance DEV environment, it works pretty well that we install 11.2.0.2 and copy data from the old database, and then shutdown the old one. out of place does it mean you are restoring database on another server then upgrading? why like that any reason..
1) For Out-of Place upgrade, should I just follow normal installation to install grid infrastructure and then the RAC?Yes, You need to build RAC environment
2) In selecting Installation type should I choose Create and COnfigure database, or Upgrade an Existing Database?Upgrade existing database.
3) What should I do with the ASM? I want to use the existing ASM.you need to create an ASM instance on new server..
4) Can I out-of place upgrade one node, and make it join the RAC, and then roll to another node, or I have to install 11.2.0.2 on all 3 nodes and configure a new RAC to replace the old RAC.
readme.html
5) What should I do with ocr and voting disks?at the time of cluster installtion you need to configure , later you need to register database before upgrade.
Thanks

Upgrade RAC from 10.1.0.3 to 10.2.0.2

Hi All,
I need to upgrade my RAC DB from 10 1 0 3 to 10 2 0 2.
I first need to install 10 2 0 1 software.. in different oracle home.. doubt clusterware in diffent home.??
Upgarde Database and Clusterware to 10 2 0 1
Install patchset 10 2 0 2
upgrade database and clusterware
Am I correct..
Can some one guide with exact documentation on metalink.. I am not able to find it.. please help..
Is above mentioned steps correct...
thanks in advance...

The doubt:
step 1 to install 10 2 0 1:
I will install oracle database software in separate oracle home.
my question is what about my CRS installation should I do a separate installation separate home.. or upgarde the exsiting CRS Home..??
Message was edited by:
user497634

11gr2 RAC Upgrade-Spfile from old home.

Hi Team,
We have sucessfully upgraded database from 11.2.0.1 to 11.2.02 in RAC , But one database is coming from OLD ORACLEHOME
the spfile location is show ing as old ORALCE home ,at ASM in +DATADG spfile is there but still when we use srvctl start database database name ..
its getting statted from old oracle home and only one instance is getting started..another instance is not coming up..!
oracle@HDB1:/oracle11R2/app/11.2.2/dbs $srvctl start database -d FCTS1
PRCR-1079 : Failed to start resource ora.fcts1fcr.db
CRS-5017: The resource action "ora.fcts1fcr.db start" encountered the following error:
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '/oracle/app/product/11.2.0/dbs/spfileFCTS1.ora'
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3
CRS-2674: Start of 'ora.fcts1fcr.db' on 'hbfcstgdb2' failed
CRS-2632: There are no more servers to try to place resource 'ora.fcts1fcr.db' on that would satisfy its placement policy
oracle@HBFC:/oracle11R2/app/11.2.2/dbs $cd /oracle/app/product/11.2.0/dbs/
SQL> show parameter spfile
NAME TYPE VALUE
spfile string /oracle/app/product/11.2.0/dbs
/spfileFCTS1FCR.ora
SQL> show parameter database
NAME TYPE VALUE
cluster_database boolean TRUE
cluster_database_instances integer 2
Thanks
MAnohar.

Hi,
can you do an
srvctl config database -d <dbname>
and print the output here.
Regards
Sebastian

Upgrade patches from OWB 10.2.0.1 to OWB 11.2.0.3

We are upgrading from OWB 10.2.0.1 to OWB 11.2.0.3
We have upgraded database from 10.2.0.1 to 11.2.0.3
What are the patches that needs to be applied before upgrading the repository?
What are the patches that needs to be applied after upgrading repository?

follow this link
http://www.orafaq.com/forum/t/119954/2/
http://wiki.oracle.com/search/threads/10.2.0.1?contains=10.2.0.1
http://www.oraclealchemist.com/oracle/patching-from-10201-to-10203/
also i assume there is no RAC involved in your case.
Edited by: Darthvader-647181 on Dec 2, 2008 8:13 AM
Edited by: Darthvader-647181 on Dec 2, 2008 8:14 AM

Migrate EBS(12.1.1) DB (10.2.0.4) RAC from linux itanium to HP-UX Itanium

Dear Friends,
We've a migration project to move oracle EBS database(10.2.0.4) 2 node RAC from linux itanium to hpux itanium and later upgrade to 11.2.0.2.
Could you please send me a document which explain the steps to proceed.
EBSVesrion (12.1.1)
Current DB Linux Version RHEL 5.2 Itanium , (10.2.0.4)
Future DB : HP-UX 11iV3 Itanium. (11.2.0.2)
Regards,

Duplicate post ? - 10g to 11g upgrade and platform migration from linux to hp unix
Pl post EBS questions in the EBS forums - http://forums.oracle.com/forums/category.jspa?categoryID=3
HTH
Srini

Want to upgrade RAC 10.2.0.2 database (2 instances) to 10.2.0.5. DB size is 4 TB. Contains mostly .pdf files, reports. I do not have test/upgrade environment. How much time I can expect it will take?

Want to upgrade RAC 10.2.0.2 database (2 instances) to 10.2.0.5. DB size is 4 TB. Contains mostly .pdf files, reports. I do not have test/upgrade environment. How much time I can expect it will take?
How much the upgrade process depends of database size, in this case?
I have fast boxes IBM AIX 5.3 , 64 b.

Appreciate your comments ...
Yes, sound stupid, regarding test environment, but in reality, is not that much:
-I do have "preprod" environment, (2 instances RAC) same releases of OS, OCW,RAC ... but DB size is 40 GB!!! It has all the objects as production, but (again but) it does not have physical standby, as production has. This is not that unusual, knowing that production DB grows very fast, and very large, and business do not want to keep preprod, dev, test databases same HUGE size as production is. Savings ...
-My DB upgrade depends if application running on top of it is certified for higher RDBMS release ... looks like they have some problems.
-Very encouraging sounds comment that DB upgrade does not depend that much of the DB size ...
- i do not recall from where this info came, but I have heard that R 11.* treats PDF files in different way that R10 did it ... and because of that, process of upgrading big databases which have many items of that type (pdf) can take very long. Any idea about this?
-Brian, thx ... I'm trying hard to provide DB simmilar size in UPG environment and face all possible pitfalls before I go in production...thx for youe advice. I'm relly interested in how upgrade to 11.* from 10.* traets my pdf-s ... All my TBs comming from pdfs. Everi advice will be wellcome ...

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

Facing Parse Errors after upgrading database from 10g to 11g

Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        30 anonymous block
319e277050        57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
Suresh

Hi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards,

Unable to Sign in analytics After Upgraded obiee from 10g to 11g

Hi all,
I have problem when upgrading catalog from 10g to 11g.
The error is:" Unable to Sign In . An invalid User Name or Password was entered. "
I upgraded following the steps like this:
1.Login EM and check BI server is running successfully.
2.Started the UA.bat.
Select the operation:Upgrade Oracle BI RPD and Web Catalog.
Step by Step,and the upgrade completed successfully.
3.Open the RPD online using the Admintool succefully.
4.But when I Login the BI and view the dashboard with the 10g's user (Administrator),the page appear the error "*Unable to Sign In . An invalid User Name or Password was entered.* "
5.Then I Try to Regenerating User GUIDs
1. Update the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI:
a. Open NQSConfig.INI for editing at:
b. ORACLE_INSTANCE/config/OracleBIServerComponent/coreapplication_obisn
c. Locate the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter and set it to YES, as follows:
d. FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES;
e. Save and close the file.
2. Update the Catalog element in instanceconfig.xml:
a. Open instanceconfig.xml for editing at:
b. ORACLE_INSTANCE/config/OracleBIPresentationServicesComponent/
c. coreapplication_obipsn
d. Locate the Catalog element and update it as follows:
e. <Catalog>
f. <UpgradeAndExit>false</UpgradeAndExit>
g. <UpdateAccountGUIDs>UpdateAndExit</UpdateAccountGUIDs>
h. </Catalog>
i. Save and close the file.
3. Restart the Oracle Business Intelligence system components using opmnctl:
4. cd ORACLE_HOME/admin/instancen/bin
5. ./opmnctl stopall
6. ./opmnctl startall
7. Set the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI back to NO.
Important: You must perform this step to ensure that your system is secure.
8. Update the Catalog element in instanceconfig.xml to remove the UpdateAccount GUIDs entry.
9. Restart the Oracle Business Intelligence system components again using opmnctl:
10. cd ORACLE_HOME/admin/instancen/bin
11. ./opmnctl stopall
12. ./opmnctl startall
BUT THE ERROR ALSO EXISTING!
So,waiting for the help,thanks!

Hi,
if your using oracle db please make sure your db settings and tnsnames.oRA settings
also try you please try below troubleshooting steps:
1) please check latest error message and find the root cause,
presentation catalog log path:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIPresentationServicesComponent\coreapplication_obips1\sawlog0.txt file
also check it nqserver.log file
oracle bi server log path ref:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\nqserver.log
2)can you try to login RPD,EM and console by using your weblogic a/c then try to login with some other user.
if its not working then try to delete that users from catlog and check it Check OPMN services are running state.
e.x:
C:\Oracle\Middleware\instances\instance1\bin>opmnctl startall
opmnctl startall: starting opmn and all managed processes...
C:\Oracle\Middleware\instances\instance1\bin>opmnctl status
Processes in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 4992 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 2420 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 1856 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 5684 | Alive
coreapplication_obis1 | OracleBIServerCom~ | 5232 | Alive
3) Refresh GUIDs and Restart WebLogic and OPMN Services then try it again...still if your getting same issues then try to
check DB(try to login and confirm) and check it RPD --> physical layer connection pool setting and try to
view physical data.
also paste it your latest error log message (nqserver.log and sawlog01.log message) here
THanks
Deva

Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?

Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?
For those who have done this,
1. What quirks did you find that you had to overcome in your installation (I know that everyone's environment is different and produces differest results)?
2. What part of your code broke for which you had to find fixes?
Tips and suggestions for a smooth installation, besides following the installation document.
Thanks!

Create a car (archive file) in CF 9 enterprise which will capture all CF 9 settings like Data sources, Web services etc. Make sure when you are doing this, pop up blocker is disabled.
NOTE : While creating the archive file, give the full name with the absolute path in the package name. For example C:\Test\mypackage.car
Then move this car file into the server where you want to install CF 11. Install CF 11 and then deploy this archive (car) file. All CF 9 settings will be migrated to CF 11 enterprise.
Else, if you want to install CF 11 on the same server where CF 11 is installed, then remove the connector for all the websites which are configured with CF 9, make sure the CF 9 services are running and then run the CF 11 installer and at the end of CF 11 installation, you will get a dialogue box which will ask you to migrate CF 9 settings in CF 11.
Run the Code Analyzer in CF 11 Administrator to check whether any the CF 9 code used in your application is breaking in CF 11 or not
HTH
VJ

R12 Upgrade Report from 11i Getting Error

Hi everyone,
We are currently working an R12 upgrade project from 11.5.10 to 12.1.3. I am currently converting a report from 11i to R12 but it is erroring out when I run it in R12. Below is the log. Any help would be greatly appreciated. Thanks.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXHH_APXNACHA_CHASE module: XXHH: NACHA Payment Format Chase (HHG)
Current system time is 06-DEC-2011 15:52:03
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PAYMENT_BATCH='JRG120111b'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 6 15:52:04 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3660174.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 06-DEC-2011 15:52:06
---------------------------------------------------------------------------

It looks as though its failing in your beforereport trigger.
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.I dont believe payment batches are used anymore as they need to be done via Payment profiles and therefore you will need to use Payment Instruction ids instead. Also the setup at R12 is Mosaic
try including this. as the first statement in the Beforereport trigger. All the banks tables payment tables has changed so unless you have changed these to you will need to adjust these correctly to the R12 tables.
BEGIN
MO_GLOBAL.INIT ('SQLAP');
MO_GLOBAL.SET_POLICY_CONTEXT('S',FND_PROFILE.VALUE('ORG_ID'));
END;

Oracle Forms & Report Upgrade/Migrate from 6i to 11g

Hi All,
We are planning to upgrade/Migrate from Oracle Froms and Reports 6i to 11g. Can some one please give me an high level steps to upgrade and migrate from 6i to 11g version.
Many thanks in advance.
Kind Regards,
Mohan

hi ,
use below steps for Eliminate this issue
To start the wizard version of the Forms Migration Assistant:
1. On Windows systems, set the environment variable FORMS_PATH:
SET FORMS_PATH=%ORACLE_HOME%\forms
On UNIX systems, set the variable FORMS_PATH as in the example below:
setenv FORMS_PATH $ORACLE_HOME/forms
2.
In Windows, from the Start menu, select ORACLE_HOME | Forms Developer |Oracle Forms Migration Assistant (GUI Mode), or at the command line, start the conversion utility by entering: frmplsqlconv.bat mode=wizard.
or
in UNIX, enter frmplsqlconv.sh mode=wizard.
The Conversion Wizard Welcome dialog displays.
Regards,
Babu

Upgrade IDSM2 from 4.1(5)S225 to 5,1 using application partition

can i upgrade an IDSM2 (WS-SVC-IDSM2-BUN)in a 6513 from 4.1(5)S225 to 5.1 by copying the 5.1 application partition to the sensor
[from the cisco userguide]
Chapter 10 Configuring the Sensor Using the CLI
Reimaging Appliances and Modules
Reimaging the IDSM-2
This section contains the following topics:
Catalyst Software, page 10-124
Cisco IOS Software, page 10-126
Catalyst Software
To reimage the application partition, follow these steps:
Step 1 Obtain the application partition file from Software Center on Cisco.com and copy
it to an FTP server.
Step 2 Log in to the switch CLI.
Step 3 Boot the IDSM-2 to the maintenance partition:
cat6k> (enable) reset module_number cf:1
Step 4 Log in to the maintenance partition CLI:
login: guest
Password: cisco
Step 5 Reimage the application partition:
[email protected]# upgrade ftp://user@ftp server IP/directory
path/image file
Step 6 Specify the FTP server password.
After the application partition file has been downloaded, you are asked if you
want to proceed:
Upgrading will wipe out the contents on the hard disk. Do you want to
proceed installing it [y|n]:
Step 7 Type y to continue.
When the application partition file has been installed, you are returned to the
maintenance partition CLI.
Step 8 Exit the maintenance partition CLI and return to the switch CLI.
Step 9 Reboot the IDSM-2 to the application partition:
cat6k> (enable) reset module_number hdd:1
Step 10 When the IDSM-2 has rebooted, check the software version.
Step 11 Log in to the application partition CLI and initialize the IDSM-2.
See Initializing the Sensor, page 10-2, for the procedure.
IF NOT, THEN IS THERE A SHORT CUT FROM 4.1 to 5.1 ?

Just wanted to clarify some things.
As Scott has already confirmed you can re-image using the method described and following Scott's advice on what additional updates to install.
BUT understand that any configuration you have your 4.1 sensor will be lost during that method of re-imaging to 5.1.
Another alternative is to first upgrade from 4.1(5)S225 to 5.0(1), and then to upgrade to 5.1(1).
The upgrade to 5.0(1) will convert the 4.1 configuration into a compatible 5.0 format.
I saw another post you made implying that you had to downgrade back to 4.1(5)S189 to do the 5.0(1) upgrade. This is not the case. You can upgrade directly from your current 4.1(5)S225 to 5.0(1).
You can install the IPS-K9-maj-5.0-1-S149.rpm.pkg file directly on your current 4.1(5)S225 sensor.
When S225 was installed on your 4.1(5) sensor, it also placed in storage the corresponding S225 update for your 5.0 sensor.
So when IPS-K9-maj-5.0-1-S149.rpm.pkg is installed on the sensor it will detect that stored off S225 for 5.0 and install it at the same time.
So once installed you will be immediately at 5.0(1)S225.
Once at 5.0(1)S225, then you can upgrade directly to 5.1(1) using the IPS-K9-min-5.1-1d.pkg upgrade.
(NOTE: 5.1-1d file was created to fix some upgrade bugs, but still installs the same 5.1(1) files as the original 5.1(1) upgrade package).
So you will wind up at 5.1(1)S225.
Now at this point I would recommend installing at least one later signature update (S226 or higher in your case) BEFORE installing the 5.1(1p1) patch.
And AFTER the signature update, then install the 5.1(1p1) Engineering Patch (contact the TAC for this patch).
Because of this specific upgrade path, the best way to avoid some issues is to install at least one signature update before installing the 5.1(1p1) patch. The signature update helps to ensure the sensor is ready for the 5.1(1p1) upgrade. Some of the files needed for the 5.1(1p1) upgrade have been seen to not get carried forward properly in the upgrade from 5.0(1) to 5.1(1), but a signature update corrects those issues.
NOTE: This precaution of installing the signature update BEFORE the 5.1(1p1) is only needed when upgrading from 5.0(1) to 5.1(1). If imaging directly to 5.1(1) using the maintenance partition, then the 5.1(1p1) can be installed before a signature update without an issue.
Once 5.1(1p1) is up and running and monitoring packets and generating alarms, then additional signature updates can be installed afterwards.

Upgrade 4240 from 4.1 to 5.0

Salam
i want to upgrade 4240 from 4.1 to 5.0
when i am in romon mode and i give ip address to managment Interface of IDS and Tftp Server Address. After giving address i am not able to ping in romon mode to tftp server. i have use cross cable between IDS and TFTP Server and also droping straight cable from IDS and tftp server on switch. But when i am in configuration mode then i can ping. So please tell me what i do to upgrade 5.0. also tell me if any other method to upgrade . Thanks in advance

If you are truly attempting to upgrade from 4.1 to 5.0 (versus a re-image), the correct approach is to install the 5.0(1) Major update file using the CLI upgrade command. This will retain any configuration settings on the sensor.
The steps you describe above are to re-image your sensor using the 5.0(2) system image. I am not sure why your settings are not working. Have you assigned an IP address to the gateway? Depending on your network topology, this may be necessary. You should also try pinging your gateway or another active address on your network to see if you are even getting out of the sensor.
-Rusty

Upgrade RAC from 9.2.0.6 to 9.2.0.8

Similar Messages

Maybe you are looking for