Upgrade related question

Hello Experts,
We are using sap business one 2005 pl 25. We using Databae sql server 2005 for it.
Now if suppose if we upgrade to sql 2005 to sql 2008 then sap b1 2005 will support or not?
Now second question:-
If suppose we upgrade our SAP B1 2005 to SAP 8.8 then whether it support to SQL 2005 or SQL 2008?
Please guide me.
Regards,

Dear,
Upgrade your SQL server from 2005 to 2008.
and upgrade your SAP B1 2005 b immediately because SAP 2005 B is no longer supportive by SAP.
Before upgrading database and SAP date the backup of your company databases.
SAP 8.8 Supports both SQL 2005 and SQL 2008
but SAP b1 2005b Only supports SQL server 2005
Hope this will help u.
Thanks,
Neetu

Similar Messages

Upgrade related efforts

Hello Friends,
We are planning to upgrade BW 3.5 to 7.0 and I am preparing documentation on upgrade related activities.
I would like to know the conversion related efforts and I would appreciate if you can share some documents.
Do I have attend a demo workshop to learn more on upgrade activities?
Do we loose any data or any queries during upgrade?
What kind of functionality test we would have to perfrom?
What kind of regression testing activities, we would have to perform?
What kind of post upgrade activities to be performed?
I reviewed some threads from SDN, but didn't get a clear picture on above questions.
Thanks
Priya

hi priya,
check out this link....
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
add these too....
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
https://wwwn.sdn.sap.com/irj/sdn/wiki?path=/display/bi/upgrade%2bof%2bbi%2bto%2bsap%2bnetweaver%2b2004s
hope it will help...

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
ible?
(2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
(3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
(4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?

Hi Vishal,
I'll try to answer your questions as best I can.
1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
Ron

In which Board we need to post cRIO related Questions?

sir,
In which board do i need to post cRIO related Questions and doubts regarding my application with cRIO .Please help me previously i have posted in motion control drives as my application is related to motor control using cRIO.bu i am not getting any reply .i couldnt find any cRIO related board in select board option.
Solved!
Go to Solution.

Hi illa,
You can post your query under the Real Time Measurement and Control
http://forums.ni.com/t5/Real-Time-Measurement-and/bd-p/280

Two related questions: ColdFusion 10/Java applications and J2EE supported servers

I have two related questions:
1. CF10 and integration with Java Web applications
We have a couple of Java applications running on JRun and interfacing with CF9 applications. The JRun clusters were created through the JRun Admin and, apart from lack of Axis 2.0 support, have served us well for years now. And, as would be the case, the ColdFusion9/Java/Flash application is a critical public-facing application that the business uses for bidding on projects.
It appears that with ColdFusion 10 on Tomcat, we will not be able to run those Java applications on a Tomcat-CF10 JVM cluster. Is this correct? IF so, what are our options?
2. J2EE Application Servers supported by Adobe for CF10
Which of these is correct?
A. This URL (http://www.adobe.com/products/coldfusion-enterprise/faq.html) states "ColdFusion 10 supports IBM® WebSphere, Oracle® WebLogic, Adobe JRun, Apache Tomcat, and JBoss."
B. This URL (http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/cf1 0/coldfusion10-support-matrix.pdf) states:
"J2EE application servers: WebLogic Server 10.3, 11.1, WebSphere Application Server 7, ND 7 JBoss 5.1, 6.0, 7.1.0"
I *think* "A" above is wrong re. support for Adobe JRun. It does not specify a version of Apache Tomcat unless it is simply referring to the custom version the comes with CF10.
Option "B" above shows no support of Adobe JRun or 'standard' Apache Tomcat.
Thanks,
Scott

Question 1 above was answered: "No support for Java web applications under CF10's custom version of Tomcat"
Question 2: No answer yet: Is Apache Tomcat (NOT Adobe's customized version) supported for CF10 J2EE deployment? I do not see any installation instructions on how to install CF10 on Apache Tomcat 6 or 7.
Is anybody using Apache Tomcat as their J2EE app servers and, again, NOT Adobe's customized/limited version?
Thanks,
Scott

Upgrade related syntax errors

What are the Upgrade related syntax errors

Hi Sudheer,
pls go through the upgrade issues and its solutions...
hope it helps u...
Upgrade Tips & Key Learnings
Problem 1:
In DBCHK_PRE phase in PREPARE RUN fails with the message
Error: Shared library path is insufficient
Solution
Before executing Upgrade Assistant server and GUI please append this
environment variable in both shells with following value and also refer SAP Note:
817463
LD_LIBRARY_PATH-->Append with /sapdb/programs/lib/lib64
Problem 2:
In Upload_Request Phase in PREPARE RUN fails with the message
Error: Full access to directory /usr/sap/trans denied
Solution:
Provide chmod 777 permission to the directory /usr/sap/trans
Problem 3:
In SHDINST_SDB_CHK phase in PREPARE RUN fails with message
Error: Error by create user SAP<SID>SHD
Solution:
We need to create this user manually in Database. Please also refer to SAP Note
39439
Problem 4:
In 'Installation Module' of PREPARE RUN it fails to add the shadow instance
port entries in /etc/services
Solution:
50
Manually enter the shadow instance sapmsSHD<SID>, Sapgw<SYSNR>,
sapdp<SYSNR> and repeat the phase.
Problem 5:
In 'General Checks Module' of PREPARE RUN it fails for Permission issue for
files
Solution:
Add the write permission for the files /usr/sap/<SID>/SYS/exe/run/icnbmd and
/usr/sap/<SID>/SYS/exe/run/saposcol
Problem 6:
In ACT_REL phase of SAPUP it fails with message index /table WEB_FILES
couldn't be activated
Solution:
Please refer SAP Note: 847019
Problem 7:
After the completion of NW2004s ABAP upgrade. We found that saposcol was
missing from /usr/sap/<SID>/SYS/exe/run
Solution:
Copy the saposcol from the directory /usr/sap/put/exe
Errors encountered while executing BEX Applications in Portal
Problem 8
You call a Business Explorer (BEx) Web Application (Java) and the system
Displays the following error message instead of the BEx Web Application:
Portal runtime error
Access denied
This problem may arise because of missing authorizations for the
Security zone in which the BEx Web Application is executed in the
Portal,
51
Solution
Please apply the SAP Note 872043
Problem 9
When you execute a Web Application (NetWeaver2004s), the following
Error message appears: Parameter HIERARCHY_DATE does not exist.
Solution
Import Support Package 07 for SAP NetWeaver 2004s BI (BI Patch 07 or
SAPKW70007) into your BI system. Otherwise, you can enter the table entries
manually as mentioned in note 923122
regards,
rudra...
Assign points if useful...

Deafult search engine on a new tab-this thread was closed but I have a related question. Once you put the new url in, what then? Close? When tried, did not work

"deafult search engine on a new tab" - this thread was closed but I have a related question. [the word “default” is spelled as it on the thread] Once you put the new url in, what then? Close it? When tried, it did not work. The closest answer is noted here. Instructing to go to about:fig. Specifically, I installed the accuweather add=on and it took over my tab home page - the one that comes up when you click for a new tab. I didn't like it so I clicked the button to remove it and the page went blank. I searched to see out to restore the tab page, tired the reply at this page :
http://support.mozilla.org/en-US/questions/753256?s=install+search+box+on+new+tabs&r=3&as=s
But it did not work. Can some on help me? Just want to know how to make google or some page open on a new tab.
Many thanks

Thanks so much for your support. As I said I am not a professional, so I by chance saw a friend who is and this is what he suggested and it worked.
We googled for an answer and found this site: http://www.guidingtech.com/8004/have-new-tab-page-open-specific-website-firefox-chrome/
It says to Download and install Download and install''' NewTabURL''' and gives instructions on how to. Now when I open the tab it goes to my preferred search page!

PM/EAM related questions posted in PLM forum

Hi,
I was going through some of the threads available in PLM forum, but to my surprise, most of the threads posted are related to PM, which should have been posted in EAM forum. It was clearly mentioned by the moderator in one of the sticky thread [PLM-Forumsplit - Please ensure you are using the right forum|PLM-Forumsplit - Please ensure you are using the right forum;
Questions regarding Plant Maintenance (PM) or Customer Service (CS) are discussed in the Enterprise Asset Management (EAM) forum
forums - posts will be moved to the right forum.
Please ensure your are opening a new thread in the right forum
Despite the clear instructions given my the moderator, PM related questions are still posted to PLM forum and some of the active participant of EAM forum answers these questions in PLM forum. It would be nice if those threads are moved to appropriate forum, so that the relevant informations are available under one forum, also, PLM forum should be monitored regularly and inappropriate threads are to be moved to their respective forum.
Few PM related threads posted recently in PLM forum:
[Change PR for External order|Change PR for External order;
[BAPI or Function Module to Complete Maintenance calls in IP10|BAPI or Function Module to Complete Maintenance calls in IP10;
[delete material from PM order|delete material from PM order;
[Message no. IW056 Work center change --> default data redefined|Message no. IW056 Work center change --> default data redefined;
[Component in Task list not reflecting in maintenance order|Component in Task list not reflecting in maintenance order;
[Deleted functional location/equipments|Deleted functional location/equipments;
[PM orders not listing components from material BOM|PM orders not listing components from material BOM;
[Completion date in Maintenance Plans in IP10|Completion date in Maintenance Plans in IP10;
I had used abuse reports for some, but numbers of such posts are many.

I hate to say this, but I often see the same thing, and I've never been able to figure out exactly what triggers selectability vs. non-selectability, but I suspect some of it has to do with tranparency flattening in particular, and possibly text wrap in cases where that comes into play. ID optimizes the PDF it creates, I think, and that might cause text, or even images, to be broken into chunks in funny ways. It occurs to me that turning off optimzing for fast web view might help in this regard.

Please post documentation-related questions or comments on the

Please post documentation-related questions or comments on the Performance Management Applications {forum:id=1318} forum
http://forums.oracle.com/forums/forum.jspa?forumID=1318

I just got a call today that I reached my 300GB limit for the month. I called and got a pretty rude response from the security and data usage department. The guy told me in so many words that if I do not like or agree with the policy that I should feel free to find another service provider.!!! I tried to explain that we watch Netflix and XFinity on-demand alot and I was told that that can not be anywhere close to the data usage. I checked my router and watching a "super HD, dolby 5.1" TV show on Netflix will average about 5-6 GB per hour (1.6MB/s) ... sp this means that I can only watch no more than 1-2 Super HD TV shows a day via Netflix before I run out of my data usage. This seems a bit redicilous doesn't it? Maybe the TV ads about the higher speed than the competition should be accompanied with "as long as you don't use it too often" Not a good experience ...

Where do I post my CRM related questions

Where do I post my CRM related questions.
thanks
siva
Message was edited by:
sivapara

Hi Siva,
You can select the module of CRM from the category and post your question there. You can even search for CRM and Post your question.
Regards,
[email protected]

Online Help Related Questions

Hi
FYI there is no longer a dedicated place on Microsoft.com for online help related questions.
We are told that VS General (here) is the best place for help questions.
Note that these sites are a good place to get help on help (Microsoft and MVP presence):
http://groups.yahoo.com/group/hatt/ -- for WinHelp & HTML Help & general help discussion
http://tech.groups.yahoo.com/group/MSHelpViewer/ -- For HelpViewer help (VS 2010/2012 help; Windows 8 help)
http://tech.groups.yahoo.com/group/MSHelp2/ -- For MS Help 2.x help (VS 2002/2003/2005/2008 help)
Feel free to ask questions on this thread if you need to. At least then we can find your post.
You can also email the VS/MSDN help team directly -- [email protected]
Please let them know how you feel about the lack of support for Online Help in the forums.
Rob
www.helpmvp.com -- Various Help resources
Rob Chandler Help MVP www.helpwareGroup.com | mshcmigrate.helpmvp.com | hv2.helpmvp.com

Actually, we cannot (at least anymore) directly email the team. I tried and got a reject from the mail server. So, I'm going to post here so I can feel better knowing I said something and then I can get back to programming :-)
Ok, I’ve been developing Windows apps since Win 3.1 (yeah, a long time) and have always admired the Microsoft attitude towards Developers and it’s desire to educate and empower R&D.
So, I’m wondering what’s going on? Why am I being asked to have an account to develop anything for MY own PC? Why am I being asked for my Microsoft account password, repeatedly, when I’m just looking up documentation on UserControl or C3 keywords…
repeatedly? This is nothing short of annoying and it gives me pause and concern about the ecosystem. Is the plan to lock down programmer’s capabilities, knowledge and tools?
I’m involved in the TAP program for Windows 10 and have voiced concerns in the same category with regard to installation and deployment of Universal Apps. Security is not a reasonable excuse. Some of us love to program and actually
control their PCs. We are not planning to sell everything we write on the Windows Store. What happened to programming something cool for your home network or just for friends? We need, and used to have, Microsoft’s support in doing
this sort of thing. Documentation and tools are more important now than ever. I’m saddened to see the direction things are heading…
If there is a sane reason I’m being badgered to ‘log in’ to read .NET documentation every hour, please share. If not, please consider lobbying to get things back on track.
Thanks

Button, or other panel related question

so, if any of you have read my previous topic about painting rectangles in a panel, that worked great, but now i need to mkae those rectangles components so that when someone hovers over it or clicks on it it displays information at a certain area. I know how to make listeners and how to add buttons in a panel, BUT how do I add buttons at a specific coordinate. This program graphs data on a specific scale and therefore adding a button in the approximate area using a grid layout will not be good enough. Is there anyway for me to place the the button/component/object at the extact location that I want?
thanks in advance

In future GUI related questions should be posted in the appropriate GUI forum (likely Swing).
so, if any of you have read my previous topic about
painting rectangles in a panel, that worked great,
but now i need to mkae those rectangles components so
that when someone hovers over it or clicks on it it
displays information at a certain area. What?

IPhoto '08 to iPhoto '11 Upgrade PROBLEM & Questions

Despite all the negative reviews at the App Store about iPhoto '11, I decided upgrade from iPhoto '08 so I could conveniently upload photos to FaceBook from iPhoto. (The FaceBook Uploader for iPhoto never worked for me.) I thought the ratio of negative reviews were unbalanced because people who are satisfied with the product have less motivation to write a review. Maybe I was wrong.
My problem:
I only bought iPhoto '11, not the iLife package, from the App Store. When I first opened iPhoto '11, I was warned that my library would no longer be readable by earlier iPhoto versions. No problem, I expected that. As I had somewhat over 15,000 photos in my iPhoto '08 Library, I was also notified that that it would take an hour or longer to rewrite the library. No problem, I expected that too. iPhoto first read my old library, then started rewriting. When the rewriting progress bar was just past halfway, iPhoto '11 suddenly quit and sent an "iPhoto Problem Report" to Apple. This has happened about 5 times now, both before and after restarting my computer. It might seem related to free disk space, but I just put in a new 750Gb hard drive with over 400Gb free. All my other specs also meet or exceed iLife's requirements.
My Questions:
1. Can anyone suggest what they think the problem is and how to proceed? I couldn't find a similar problem in the Apple Support Community.
2. If I can't upgrade, how do I go back to iPhoto '08? I backed up everything to an external drive using Time Machine before trying to upgrade. I know there's a iPhoto Library file in Pictures but there's also another file somewhere that contains the data for titles, events, comments and edits. How do I find it and how do I restore them to my MacBook?
3. Can I get my $14.95 back from Apple? I don't see a way to talk to Apple without costing me more than the $14.95
Any help will be GREATLY APPRECIATED!

What's happening is that some file (or files) in the Library are damaged in some wy and that's tripping up the upgrade. This file (or files) may not necessarily be photos but could be one of the background database files. Unfortunately there's not any real way of knowing.
Any time you upgrade or update an app or the OS you run the risk of exposing a problem that has bee hidden heretofore. That's why you make back ups.
Possible solution: Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Reverting means restoring your Librry from Time Machine and re-installing 08. It's not a big thing to do.
Contact App Store support about a refund. There's an email link on the right hand side of the app store window.

LDAP syncronization with Oracle DB. Related questions.

Hello everybody,
The problem / objective: I have an Oracle DB with information for clients (ie). And I want to store that information in an LDAP server and have that information syncronized with the Oracle DB.
I alredy read A LOT about this but no luck. I have tried ApacheDS and Microsoft AD for the LDAP servers. I was able to install both of them and I was able to create a trigger in my OracleDB in order to trigger actions and add/delete/update records on the LDAP server. But, I need that the trigger works both ways. So I need a trigger in ApacheDS or AD. And here is the problem. This is not supported.
While reading about this, I found information about Oracle Internet Directory. So, here is my first questions:
1- Is OID an Ldap Server? I believe it is, but, is like Apache DS or AD? (In other words, is like a service which I can connect and implement CRUD operations?)
2- OID is just supported/deplyed with Oracle 11g?
3- Can I synchronize my Oracle DB with OID? I mean, if a change is made in the Oracle DB then this change is implemented on the OID, and backwards. (like triggers, in both ways)
4- If OID is like AD, then, is this the best LDAP server to use?
And talking about Microsoft Active Directory (AD), how can I achieve this?. I read about third party tools to do this (Quest Quick Connect, Microsoft Forefront Identity Manager), but I want to find another solution like triggers. (If is possible, if not.. then is not a solution :) ).
Probably the questions are not very clear (the problem is clear), but I have a mess in my head now.. and I want some council about this.
Thanks in advance.

Hi,
Firstly I would suggest you to upgrade your database from Oracle Release 11.2.0.1.0 to Oracle Release 11.2.0.2 . This is the recommended Oracle 11g database version for SAP solutions. Many of your problem will get resolved with it.
Question 1:
So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
For immediate resolution the approach you have followed is correct viz limiting number of dialog processes for RFC. Secondly you need to analyze why RFC processing takes so much time. You need check which programs are getting executed by those RFC.
Generate EarlyWatch report for more detailed view
Question 2:
My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before.
The libttsh11.so library cannot be found in the related directory.
Cause
The file system is mounted using CIO option, but per Note 257338.1 Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L, an ORACLE_HOME on a filesystem mounted with "cio" option is not supported.
Such a configuration will cause, installation, relinking and other unexpected problems.
Solution
Disable the CIO option on the filesystem.
References
NOTE:257338.1 - Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L
Hope this helps.
Regards,
Deepak Kori

P67A GD55 Rev B - Upgrade Bios Question

To be honest, this post supposed to be a private message to Svet, but turned out a newbie like me who just joining the forum is not allowed to send PM...so apology if this questions are being asked so many times already:
Dear svet,
Really need your help in clarifying something, to make it short here are my questions:
First here are my PC Specifications:
MSI P67A-GD55 rev B
Corsair Vengeance 2x4GB XMP Enabled
PSU Corsair X750W
Intel Sandy Bridge i5 2500k
OS Windows 7 x64
1. I have upgraded my GD55 rev B bios to the latest bios available here: msi.com/product/mb/P67A-GD55--B3-.html#/?div=BIOS
which foolishy I didn't read the warn that it will not work proeperly for Sandy Bridge
2. The bios update/flash was a success, now I have the ver II click bios, completely different with the first version. With this bios I managed to OC to my previous OC speed (4.2GHz in OC Setting by changing it into 42 multiplier and set the Vcore to 1.35)
3. The reason that I updated my bios in the first time was I often experience 0x50 error while gaming certain games, and I thought upgrading bios is one of the solutions for it (after trying to change my RAM, changing my GPU, and my PSU to no avail)
4. Then I stumble to this post of yours: https://forum-en.msi.com/index.php?topic=164135.0
with some fix in the 434 version states like this: "05.Fix system reset on 0x55 issue when use Sandy Bridge G440 CPU and install two 4G memory."
I am completely not sure whether this is related to my 0x50 BSOD or not, but really hoping that it is.
So my question is, should I upgrade/downgrade to your first post BIOS? (E7681IMS.434) or should I upgrade/downgrade to the latest beta 439 Bios (E7681IMSv439.rar) as the fix in 434 are included in 439?)
Thank you so much in advance for any help...
Regards,

Quote from: Froggy Gremlin on 09-April-13, 15:26:46
While waiting for Svet to respond, I will tell you that BSOD 050 is not enough DRAM V. being applied. It's rather a shame you didn't open a thread in the regular part of the forum, or the OC section of the forum asking for assistance 'before' flashing an Ivy support UEFI/BIOS.
That CPU is most likely capable of OC'ing to 42X easily on Auto CPU voltage while maintaining all the power saving features. VDroop set to Low or 100% depending on the available settings.
What is X.M.P. setting the DRAM V. at? If 1.50v's, to solve your BSOD, probably would have just required raising the DRAM V. to about 1.575v's or maybe even less manually. Rather than using X.M.P., the DRAM Frequency setting could have been changed manually to 1600.
Yes, all newer final or Beta versions will have previous release improvements incorporated.
Thank you for the reply...forget to delete the "dear Svet" part as it was copied from once private message intended
To be honest, I see myself rather as a silent reader than an active poster...so I would really try to avoid posting due to English isn't my first language....if that even make sense...
I think I have read quite a lot of 0x50 BSOD (CTD errors to be exact) in other forums to...have tried what people had posted as solutions for them...and still to no avail, hence my foolish and rushed attempt in flashing the bios...please do mind that the current bios is quite stable in my opinion, despite the same BSOD (CTD) in the certain game I have mentioned in my first post...
I have followed OC guide and benchmark in other forum which show each of its poster their OC settings and result (specifically i5 2500k series), and I have tried around 1 week to safely say that my unfortunate chip can only handly a stable 24/7 4.2GHz in that volt...i'm so lucky
and for XMP volt, I have no idea to be honest, I just enable it in the bios, will really look at it later on...
tl'dr thank you so much for the new insight of how to solve the 0x50! really appreciate it....If i can remember correctly, I have tried to use the default DRAM setting (without using XMP enabled) and still got the 0x50 CTD....but trying your suggestion is still a worth a try...will try this when I get home...thank you!

Upgrade related question

Similar Messages

Maybe you are looking for