UPGRADE RELATED TO OSS MODIFICATIONS
Hi all,
we are on verge of upgradtion form 4.6c to ECC 6.00
we have a lot of programs where we have applied oss notes.
Do i need to apply the oss notes in the new version ECC 6.00 too.
How can i know whether SAP has provided the same note modifications in new version i.e ECC 6.00
IN THAT CASE I DON'T HAVE TO APPLY OSS NOTE AGAIN.
Where does SPAU AND SPDD COME IN TO PICTURE
let me know if iam wrong
THANKS
SWATHI
Hi Swathi,
For the Upgrade to ECC 6.0 from 4.6c, most of OSS notes applied in 4.6c will be anyway added in the standard delivered system.
All the previous delivered OSS notes will be added in some of the Packages or patches of the ECC 6.0 system if these notes are applicable to ECC 6.0.
You can check in one way that check the applicability of the OSS notes you used whether it is applicable to version ECC 6.0 or added in package number.
Check if that package is in the upgraded ECC 6.0 or not.
I was in one of the upgrade project 4.6c to ECC 6.0, As far as my experience most of the previous notes are included.
Once the System is upgraded and there are some modifications done to standard programs, then we will have the issue of whether to go with the standard or use our modifications. In that case SPDD and SPAU are useful.
Please check the following links which will help you in using the above transactions -
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
Please use the following link to know the delta changes in the versions functionally -
http://solutionbrowser.erp.sap.fmpmedia.com/
Also, please refer to the OSS notes 741821, 852235 and 896144 for more details on the limitation of ECC 5.0 and ECC 6.0 respectively.
http://service.sap.com/upgrade-erp
You can touch base with me whenever required, so that I can share my experiences with you.
Hope this helps you.
Similar Messages
-
What are the Upgrade related syntax errors
Hi Sudheer,
pls go through the upgrade issues and its solutions...
hope it helps u...
Upgrade Tips & Key Learnings
Problem 1:
In DBCHK_PRE phase in PREPARE RUN fails with the message
Error: Shared library path is insufficient
Solution
Before executing Upgrade Assistant server and GUI please append this
environment variable in both shells with following value and also refer SAP Note:
817463
LD_LIBRARY_PATH-->Append with /sapdb/programs/lib/lib64
Problem 2:
In Upload_Request Phase in PREPARE RUN fails with the message
Error: Full access to directory /usr/sap/trans denied
Solution:
Provide chmod 777 permission to the directory /usr/sap/trans
Problem 3:
In SHDINST_SDB_CHK phase in PREPARE RUN fails with message
Error: Error by create user SAP<SID>SHD
Solution:
We need to create this user manually in Database. Please also refer to SAP Note
39439
Problem 4:
In 'Installation Module' of PREPARE RUN it fails to add the shadow instance
port entries in /etc/services
Solution:
50
Manually enter the shadow instance sapmsSHD<SID>, Sapgw<SYSNR>,
sapdp<SYSNR> and repeat the phase.
Problem 5:
In 'General Checks Module' of PREPARE RUN it fails for Permission issue for
files
Solution:
Add the write permission for the files /usr/sap/<SID>/SYS/exe/run/icnbmd and
/usr/sap/<SID>/SYS/exe/run/saposcol
Problem 6:
In ACT_REL phase of SAPUP it fails with message index /table WEB_FILES
couldn't be activated
Solution:
Please refer SAP Note: 847019
Problem 7:
After the completion of NW2004s ABAP upgrade. We found that saposcol was
missing from /usr/sap/<SID>/SYS/exe/run
Solution:
Copy the saposcol from the directory /usr/sap/put/exe
Errors encountered while executing BEX Applications in Portal
Problem 8
You call a Business Explorer (BEx) Web Application (Java) and the system
Displays the following error message instead of the BEx Web Application:
Portal runtime error
Access denied
This problem may arise because of missing authorizations for the
Security zone in which the BEx Web Application is executed in the
Portal,
51
Solution
Please apply the SAP Note 872043
Problem 9
When you execute a Web Application (NetWeaver2004s), the following
Error message appears: Parameter HIERARCHY_DATE does not exist.
Solution
Import Support Package 07 for SAP NetWeaver 2004s BI (BI Patch 07 or
SAPKW70007) into your BI system. Otherwise, you can enter the table entries
manually as mentioned in note 923122
regards,
rudra...
Assign points if useful... -
Hello Friends,
We are planning to upgrade BW 3.5 to 7.0 and I am preparing documentation on upgrade related activities.
I would like to know the conversion related efforts and I would appreciate if you can share some documents.
Do I have attend a demo workshop to learn more on upgrade activities?
Do we loose any data or any queries during upgrade?
What kind of functionality test we would have to perfrom?
What kind of regression testing activities, we would have to perform?
What kind of post upgrade activities to be performed?
I reviewed some threads from SDN, but didn't get a clear picture on above questions.
Thanks
Priyahi priya,
check out this link....
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
add these too....
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
https://wwwn.sdn.sap.com/irj/sdn/wiki?path=/display/bi/upgrade%2bof%2bbi%2bto%2bsap%2bnetweaver%2b2004s
hope it will help... -
PI 7.1 upgrade related issue (With removeContexts node function)
Hi all,
We have upgrade from PI 7.0 to 7.1, there was no changes done to the maps...but when we execute the old maps it give no value in the queue error: (this occurs during run time)...
But when I test the payload it executes fine...I have found and issue with remove context (the queue display in 7.0 is different than in 7.1)
It doesn't end with SUPPRESS context change...we have observe that the maps which has removeContext are failing...
Is there any OSS note on this issue...anyone faced this issue?
Any suggestions?
Thanks,
Srini
Edited by: Srinivas Davuluri on Oct 2, 2009 6:55 PMI have added the parameter to the init method of the Functions tab in our message mapping - retainlastValueofPreviousContext=true; according to the blog...but still the same error...
But, when I execute in the Test tab it works fine;
Any other suggestions or anyone who has faced this issue...we are on PI 7.1 SPS7
Thanks,
Srini
Edited by: Srinivas Davuluri on Oct 5, 2009 9:46 AM -
Upgrade production order after modification BOM
Dear Gurus,
we need upgrade the quantity requirement in the production order after the modification the quantity in the Bom ?
Is possible read newly the Bom whit the one operation confirmed ?
The component modificated don't allocated a this operation but for example a the operation in status initial.
Thanls a lot
PP TEAM
Daniele PistilliDear Toto,
if only one operation is confirmed then cancelation for that operation
then go for READ PP MASTER DATA option
or if u have relesed only one operation & confirmed only that operation (not full order)
then try to change in component in PRD prder itself in CO02 & realse that particular operation & confirm it
check & revert back
Regards
kumar -
SAP Upgrade - Standard function modules & modifications
Hello everybody,
we are doing a SAP Upgrade to SAP ERP 6.0 and I need your help
Some SAP standard funcion modules were modified in the last years and some weeks ago the changes were undone. The last version of the function modules are the same than the original function modules, but the version manager shows that the last version belongs to the user FGZ583 (and not SAP).
The Problem is, that SAP deals with that function modules as a modification (because the last change was done by FGZ583?), but they are identical to the original SAP function modules.
When the Upgrade is done, the SPAU/SPDD/se95 show that function modules as "modifications", although they are the same that the original ones.
What could I do to avoid that SAP deals with that function modules as modifications?
Cheers
PrashadHello Prashad,
Its standard that once the object is changed the corresponding entry is recorded in different tables.Even if you roll back now system will treat as the modifications because corresponding change entries are present in the tables. You can try to activate the older versions but i don't think this will help you.
This is not a point of worry as in SPDD adn SPAU you can choose reset to original for all those objects.
Even if you can get those objects to move back to the source version they will get back to the standard in the new release.So my advise will be to let your upgrade run and then reset these objects to original.
Regards
Niraj -
[SOLVED] Emesene isn't working as expected anymore (upgrade related ?)
Hello,
Yesterday, I used emesene, it was working perfectly well, and today it isn't anymore: It's very laggy, I can't talk to anyone because the GUI is just a grey box which doesn't show conversations windows, of the list of contacts anymore.
This morning I did a pacman -Syu, but emesene wasn't upgraded, python neither:
[2012-03-20 13:52] Running 'pacman -Syu'
[2012-03-20 13:52] synchronizing package lists
[2012-03-20 13:52] starting full system upgrade
[2012-03-20 13:57] upgraded libtasn1 (2.9-2 -> 2.12-1)
[2012-03-20 13:57] upgraded vlc (2.0.0-8 -> 2.0.1-1)
[2012-03-21 13:49] Running 'pacman -Syu'
[2012-03-21 13:49] synchronizing package lists
[2012-03-21 13:49] starting full system upgrade
[2012-03-21 13:50] upgraded bash (4.2.024-1 -> 4.2.024-2)
[2012-03-21 13:50] upgraded device-mapper (2.02.90-1 -> 2.02.95-1)
[2012-03-21 13:50] upgraded iproute2 (3.2.0-2 -> 3.2.0-3)
[2012-03-21 13:50] upgraded libdrm (2.4.31-1 -> 2.4.32-1)
[2012-03-21 13:50] upgraded lvm2 (2.02.90-1 -> 2.02.95-1)
[2012-03-21 13:50] upgraded neon (0.29.6-3 -> 0.29.6-4)
[2012-03-21 13:50] upgraded openssl (1.0.0.h-1 -> 1.0.1-1)
[2012-03-21 13:50] upgraded psmisc (22.15-1 -> 22.16-1)
Does anyone is having the same issue ?
Thanks !
Last edited by Lowra (2012-03-31 19:02:51)Actually kmess is crashing as well 20 seconds after I login after I did the same updates. Seems to be related to this problem
Application version: 2.0.6.2Application version: 2.0.6.2
Compiled at: KDE 4.8.1 (4.8.1), Qt 4.8.0
Running at: KDE 4.8.1 (4.8.1), Qt 4.8.0
73.713> No backtrace could be generated, gdb timed out.
73.717> KDE backtrace: "[
0: /usr/lib/libkdecore.so.5(kRealBacktrace(int)+0x35) [0x7fda20d565e5]
1: kmess() [0x561eca]
2: /lib/libc.so.6(+0x349f0) [0x7fda1b4949f0]
3: kmess() [0x4b3850]
4: kmess() [0x4b3861]
5: kmess() [0x4b3861]
6: kmess() [0x4b3861]
7: kmess() [0x4af4b5]
8: kmess() [0x4d4eb8]
9: kmess() [0x4d5cc7]
10: kmess() [0x4d73e0]
11: /usr/lib/libQtCore.so.4(QMetaObject::activate(QObject*, QMetaObject const*, int, void**)+0x2b1) [0x7fda1d071f11]
12: kmess() [0x52c431]
13: kmess() [0x52c483]
14: kmess() [0x52fabd]
15: /usr/lib/libQtCore.so.4(QMetaObject::activate(QObject*, QMetaObject const*, int, void**)+0x2b1) [0x7fda1d071f11]
16: /usr/lib/libQtCore.so.4(QObject::event(QEvent*)+0x99) [0x7fda1d076e09]
17: /usr/lib/libQtGui.so.4(QApplicationPrivate::notify_helper(QObject*, QEvent*)+0xb4) [0x7fda1c1cd8c4]
18: /usr/lib/libQtGui.so.4(QApplication::notify(QObject*, QEvent*)+0x113) [0x7fda1c1d2743]
19: /usr/lib/libkdeui.so.5(KApplication::notify(QObject*, QEvent*)+0x36) [0x7fda20806556]
20: /usr/lib/libQtCore.so.4(QCoreApplication::notifyInternal(QObject*, QEvent*)+0x8c) [0x7fda1d05e06c]
21: /usr/lib/libQtCore.so.4(+0x1a9ef2) [0x7fda1d08eef2]
22: /usr/lib/libQtCore.so.4(+0x1a789d) [0x7fda1d08c89d]
23: /usr/lib/libglib-2.0.so.0(g_main_context_dispatch+0x1dd) [0x7fda162c08bd]
24: /usr/lib/libglib-2.0.so.0(+0x450b8) [0x7fda162c10b8]
25: /usr/lib/libglib-2.0.so.0(g_main_context_iteration+0x69) [0x7fda162c1289]
26: /usr/lib/libQtCore.so.4(QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>)+0x6f) [0x7fda1d08d0bf]
27: /usr/lib/libQtGui.so.4(+0x26cf8e) [0x7fda1c270f8e]
28: /usr/lib/libQtCore.so.4(QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>)+0x32) [0x7fda1d05ce52]
29: /usr/lib/libQtCore.so.4(QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>)+0xf7) [0x7fda1d05d0a7]
30: /usr/lib/libQtCore.so.4(QCoreApplication::exec()+0x85) [0x7fda1d061c05]
31: kmess() [0x43b6a0]
32: /lib/libc.so.6(__libc_start_main+0xed) [0x7fda1b48138d]
33: kmess() [0x43b731]
KCrash: Application 'kmess' crashing...
KCrash: Attempting to start from kdeinit
sock_file=/home/ilusi0n/.kde4/socket-ArchBl0w/kdeinit4__0
KCrash: Attempting to start directly
KCrash failed to exec(), errno = 2
Last edited by ilusi0n (2012-03-22 08:00:56) -
Hi,
I have installed oracle database 10g release2 with 10201_compenign_win32 both are installed successfully
i logon as http://127.0.0.1:7777/pls/htmldb/htmldb_admin
i entered username and password then logout it.
after that i started upgrading with apex_3.2.1. i did all the steps under apex_3.2.1 upgrade tutorial.
after completion of all the steps
when i logon back
http://127.0.0.1:7777/pls/htmldb/htmldb_admin with. images are not going to diaplay.and there is no movement on page. when i click on submit button
all the steps are-
{copy}sql>@apexins SYSAUX SYSAUX TEMP /i/
sql>apxchpwd.sql
sql>ALTER USER APEX_PUBLIC_USER ACCOUNT UNLOCK
sql>ALTER USER APEX_PUBLIC_USER IDENTIFIED BY new_password
f:\downloads\vismit1.1\apex>xcopy /E /I f:\downloads\vismit1.1\apex\images c:\oracle\product\10.2.0\db\Apache\images
f:\downloads\vismit1.1\apex>c:\oracle\product\10.2.0\db\opmn\bin\opmnctl stopproc ias-component=HTTP_Server
f:\downloads\vismit1.1\apex>c:\oracle\product\10.2.0\db\opmn\bin\opmnctl startproc ias-component=HTTP_Server
sql>ALTER SYSTEM SET JOB_QUEUE_PROCESSES = 20
{copy}
Thanks & Regards
NishaHi Nisha,
if you don't find anything Apex-related in the dads.conf you haven't configured the OHS yet to have a DAD for your APEX yet.
Following the example in the installation manual you should have or create a section as follows
Alias /i/ "ORACLE_HTTPSERVER_HOME/Apache/images/"
AddType text/xml xbl
AddType text/x-component htc
<Location /pls/apex>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString host:port:service_name ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword apex_public_user_password
PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize
Allow from all
</Location>You'll probably have to adjust the PlsqlDatabaseConnectString to fit your database and PlsqlDatabasePassword to match the password you chose in the APEX-installation process.
Depending on your database language settings, you might also want to change the PlsqlNLSLanguage from AMERICAN_AMERICA to the value your database uses.
You'll have to restart the OHS to apply any changes. This is done by calling
ORACLE_HTTPSERVER_HOME\opmn\bin\opmnctl restartproc ias-component='HTTP_Server'
For further advice have a look here:
http://download.oracle.com/docs/cd/E14373_01/install.32/e13366/otn_install.htm#BHAGICFJ
-Udo
For further instructions on how to configure -
ECC 6.0 Upgrade related issue
Hi Gurus,
We have our project(SAP-HR) upgraded from 4.7 to ECC 6.0 version.
After data from prev system is shifted to the new system, I am facing an issue with smartform activation.
In ECC 6.0, I, without even making any changes to a smartform, tried to activate it. However it is not getting activated and giving error : Global Definitions: No component exists with the name int_tab.
However, int_tab is an intenal table of data dictionary type PERNR declared in the form interface. Using this internal table, data is passed from calling program to this smartform.
Note that this internal table is also mentioned in the input parameters in the Initialization tab in Global definitions.
This smartform is Active in the 4.7 version & the functionality is also perfectly working in that system and no changes have yet been made to the smartform in the new system(ECC 6.0).
One solution we hv discovered is renaming of the internal table, and using this new name in places where this internal table is mentioned which is cumbersome (and not very logically appealing as a solution) as this appllication has many smartforms using exactly similar functionality.
Looking forward to a cool solution.
Regards,
RishikeshHi Anish
Thanks for the response.
Structure PERNR exists in ECC 6.
However number of fields has increased in the structure. (I am sceptical about this being the reason for not allowing activation)
How do I ensure that the global definitions is correct. Its just the same as in the previous system and moreover if you run the syntax check on global definitions it shows no error(Check successfully executed).
Regards,
Rishikesh -
Problem related to OSS Note - importing file problem
Hi,
I m facing an issue while implenting an oss note 430580 , i have to import files from sapserver.
but i don't know how to do it.
below is the description of my problem.
Import the following files from SAPSERV:
/general/R3server/abap/note.0430580/K000687.PLM
/general/R3server/abap/note.0430580/R000687.PLM
Import the two files into your system.
For more information on SAPSERV, see Note 13719.
Can any one tell me how can i get rid out of this prioblem.
whether this is possible or BASIS Team can only do this.
system details
Operating system SunOS
Machine type sun4u
R/3 release 4.6CWell, these files are part of the zip.file which belong to the note. This is part of a regular transport and is normally done be basis. The data and the cofile (K....PLM & R...PLM) should be imported into your system. Before doing so they have to be transferred to the file server. Better let BASIS do these kind of things.
-
Hello Experts,
I have few doubts (Questions) regarding the upgrade from BW 3.5 to BI 7.0. I am having certain issues after the upgrade. i want to know if these are because of the upgrade or are these general issues. Can you please give me the reasons in detailed as well.
Below are my questions
1. An Event is triggering a process chain in 3.5, but the same process chain after upgrade didn't work, so when i checked the Event is missing in the Process chain.
2.There were inconsistencies in the info objects in Dev and Production
3.Development was having low space in the memory
Points assured for all answers.
Thanks in advance for your inputs.Hi Lalitha,
Migration would not affect the process chain...
you should activate and schedule the process chain again....
check the event is available ...
and regarding memory, BI running on java instance it may need more memory...ask the DBA to increase the memory...
Cheer's
HVR -
Upgrade related query- Repository Update
Hi All,
As mentioned in the upgrade guide :
After installation of MDM 7.1 and having started the MDM 7.1 Server use the MDM Console to update
your repositories. Choose Update Repository from the context menu of each repository. The MDM Console then updates
the repository so that it can be used with the latest builds. The data in the repository is automatically
upgraded.
But, i did the same thing but in my case after un-archiving the repository and login in with respective correct repository credentials,Right clicking on repository the option "Update Repository" is not active ...How will i do this action ?how do i update the repository now ?
( I have tried by Loading & Unloading also )
Please suggest !
Regards,
HarmonyHi Harmony,
Please follow below steps :
Steps involved in the MDM 7.1 Upgradation
1. Installation of MDM 7.1 in Dev Environment
2. Archive MDM 5.5 repository from the Production system
3. Unarchive the repository in the Dev system
4. Update repository in the Dev
5. Update and Test Import Maps
6. Update and Test Syndication Maps
7. Testing at the Portal level
8. Java API upgrade and check the custom made functionalities with API in the repository
9. CLIX Command Scripts need to be reworked
10. MDM ports to be reworked with the help of repository schema
11. Import the repository schema to the production environment after installation of 7.1 in production system.
12. Transportation from Dev to Production of JAVA API, CLIX
Others Activities which need to be Noted/Performed
MDM Servers
Installed in different directory
MDM Archive Files
Archive files to be copied to the new directory
MDM GUI Client
Different Installation directory
MDM Log files:
5.5 Version is XML based
7.1 version is CSV based
MDM 7.1 doesnu2019t support the log format of 5.5 version.
Copy the files from the u2018logu2019 and u2018report folderu2019 to an extra folder together with MDM_log.xsl, which allows viewing of logs from the browser
Distribution Folder content
Copy the files from the 5.5 directory to the new directory
MDM Server Setting
Mds.ini parameter settings to be checked.
Some parameters are obsolete, some parameters are replaced with newer one
MDM Import Server Settings
Mdis.ini parameters need to be checked
MDM Syndication server setting
Mdss.ini setting to be checked.
Transfer the settings of
SLD Registration u2013 Reuse the MDM 5.5 SLD Registration
Wily Instrumentation
Wily Instrumentation level Threshold
MDM Java API activities
Deploy the 7.1 Java APIs and test the existing Java programs running for the repository
Checking the MDM Compatability with WebSphere Portal
Uninstallation of MDM 5.5 SP06 (Optional)
Thanks and Regards
Praful. -
[package related not upgrade related] xorg-server-kdrive won't compile
The page related to this package suggests that it fails to build except I'm not too sure what to make of the comments - at any rate, it refuses to compile, complaining about something like %.04X not being what the compiler expected it to be or some such - I closed the terminal as soon as it failed >.>
So... how do I compile this?
Also, if you know anything about X in general, please see my related post at http://bbs.archlinux.org/viewtopic.php?pid=432854.
-dav7
Last edited by dav7 (2008-10-12 11:54:46)Bump?
-
Hello Experts,
We are using sap business one 2005 pl 25. We using Databae sql server 2005 for it.
Now if suppose if we upgrade to sql 2005 to sql 2008 then sap b1 2005 will support or not?
Now second question:-
If suppose we upgrade our SAP B1 2005 to SAP 8.8 then whether it support to SQL 2005 or SQL 2008?
Please guide me.
Regards,Dear,
Upgrade your SQL server from 2005 to 2008.
and upgrade your SAP B1 2005 b immediately because SAP 2005 B is no longer supportive by SAP.
Before upgrading database and SAP date the backup of your company databases.
SAP 8.8 Supports both SQL 2005 and SQL 2008
but SAP b1 2005b Only supports SQL server 2005
Hope this will help u.
Thanks,
Neetu -
XSS upgrade related from 600 to 603
Hi All,
My current project demands a upgrade from XSS 603 SP 6 to XSS 603 SP 6. My team has already personalized all the 36 standard countries.
We have copied the standard ESS content to custom folder and then have done the personalization. Its just a copy and not a delta link.
I request you to let me know if there will be any problem to run the personalized set of custom ESS iViews after upgrade?
Will they stop working or they will still continue to work even after upgrade?
What can be the other issues after upgrade? Will the HomePage framework setup needs to be done again?
Please help me with the answers as I need to provide such answers to client .
Regards
DKHi Siva & RB,
Below is the reply from SAP:
During MOPZ selection, for any packages you donn't want,
you can de-selected the check box in front of it. Some are
not editable check boxes, which means they are crucial judged
by MOPZ.
Just keep in mind that de-selecting the packages recommended
by MOPZ, after updating your system, different software components
may be incompatible, since it is not tested scenario.
Following MOPZ recommendation will ensure software components
patch levels are consistent, since this is tested scenario.
So, we cannot update only HR components, we should also update the mandatory components that are selected by MOPZ.
Thank you & regards,
Phani.
Maybe you are looking for
-
How to assign a task to Reuestor in OIM 11g
How to assign a task to a requestor (who has raised a request for other user). I created a Task assignment adapter and mapped variable in Process definition as Map To: Request Info Qualifier: Requester User Login Still it returns null and default tas
-
Safari Not Displaying All Images On Web Page
When I look at a web page in Safari on my iPhone 3GS, not all of the images on the page load. Instead, I see little blue squares with question marks in them. However, if I look at the same web page on an iPhone 4, the images DO load. Why is this happ
-
Hi all, I've just finished the install of CentOs 6.5 on SCVMM 2012 R2. The CentOs VM is hosted on HyperV 2012 R2. The mouse, timesync, keyboard work fine. I've only the issue with the SCVMM Shutdown functionality. When I do a shutdown from SCVMM, the
-
Hello, I have three questions about rebuilding iPhoto libraries. First, is it better to use iPhoto's built in rebuild (with all boxes checked) or use iPhoto Library Manager's rebuild? Second, I have several libraries in iPhoto 8.1.2 that I plan to im
-
"oops... there was a problem" skype won't start
i am using surface pro win8.1 and was running skype metro version quite well. once i created a new skype account from the same email id linked with the existing microsoft skype account from desktop pc. skype runs fine there but as i tried to run skyp