Upgrade SAP from ECC 6.0 EHP4 to ECC 6.0 EHP7

Dear all,
We are using ECC 6 ERP 4 SP5 with oracle 10.2g and Netweaver 7.0 EHP1.
Other system release
CRM 7.0 SP5 & CRM JAVA Release – NW 701 SP3
BI Release – NW 701 SP5 BI CONT 7.04 & BI JAVA Release – NW 701 SP3
We are planning to upgrade ECC 6 ERP4 SP5 to ERP 6 ERP7 SP1, Could you please suggest for compatibility version for CRM & BI with ECC6 EHP7
And any document for EHP7 up gradation procedure and what is the impact or change made in system after upgrade from EHP4 to EHP7
Regards,
Ajay

Hello
The nightmare is going on... this point has been discussed a year ago (Re: Comapatability between EHP7 and SAP Netweaver BI 7.0 EHP1) and the conclusion was that you only need to upgrade HUB satellite systems... and a BW system is not an HUB.
The only possible issue would be if the java stack of the BW system is used directly by the ECC system.
Did not find any information on the necessity to upgrade the CRM, so I think you should keep it as it is.
This are even getting worst because sometime sap support (OSS) are not able to provide clear answers (Interoperability btw ERP 6.0 EhP7 and SAP NW/BW 7.0)
Best regards
Strategy beyond SAP Business Suite 7 Innovations 2011 - Landscape Governance - SCN Wiki
1388258 - Version Interoperability within the SAP Business Suite
In order to use the new JAVA EE 5 capabilities and benefit from the improvements of SAP NW 7.3 the version interoperability range has been moved upwards for SAP Business Suite core applications with Release to Customer (RTC) from 2013 onwards.
This means that SAP NetWeaver Systems 7.30 or higher are required if SAP Business Suite applications are based on or operating with those central Systems (Enterprise Portal, Business Warehouse, Process Integration).
Customers wishing to utilize SAP Business Suite applications with RTC from 2013 onwards, that require one of these central SAP NetWeaver Systems, will have to upgrade their central NetWeaver Systems to 7.30 or higher before upgrading e.g. to SAP Enhancement Package 7 for SAP ERP 6.0.

Similar Messages

  • Upgrade SAP  from release 701 to 710

    Hi guys,
    We have SAP ERP 6.0 EHP 4. Our Kernel release is on version 701, our Basis/ABAP components also on release 701, for example SAPKB70105, SAPKA70105 etc. Recently, we had an issue which we raised with SAP and they asked us to upgrade to release 710. Please outline us the steps how to do this?
    Any suggestions are welcome.
    regards.

    Hi,
    At this stage, they addressed you that the system is need to upgrade 710. Now, I can say that it is not possible, because there's no release Ehp4 for SAP Ecc 6.0 running on SAP Netweaver 7.10 stack.
    Consequently, you should ask first that how can you run Ehp4 for SAP Ecc 6.0 over SAP Netweaver 7.10 to SAP AGS. This is because, as I mentioned that the latest release is Ehp4 for SAP Ecc 6.0/NWV 7.01 on SAP Marketplace. There must be a misunderstanding, in this issue.
    Best regards,
    Orkun Gedik
    Senior SAP Netweaver and Development Consultant
    SAP Technical Architect

  • Upgrading SAP from one version to other

    Hi
    I would like to know the various procedure for SAP updgrade project and the technical (ABAP) work involved in it and when it will come to picture while upgradation

    hi
    good
    in care of a upgradation you have to follow the following procedure as a vendor.
    1-SAP Release documents for the particular documents
    2-Availability of the proper Functional Spec
    3-Availability of the proper Technical Spec
    4-Servers those have been properly upgrade with the required version of SAP.
    Thanks
    mrutyun^

  • Upgrade CFM from Sap R/3 Enterprise (4.7) Sap to ECC 6.00

    Hello,
    We are in a project of upgrade Sap from Sap R/3 Enterprise (4.7) to Sap ECC 6.00. Our question is particularly for CFM component migration/upgrade.
    As we checked we have activate the extension set:
    EA-FIN: Financials Extension
    EA-FS: Financial Services
    According with the Component Version Data the extension set EA-FINSERV has the release 2.00. However, in order to execute the CFM migration with transaction TPM_MIGRATION we are not sure if our CFM installation is on release 1.00 or 2.00.
    In the other OSS note 858966 mentions the following conditions to start points migration:
    1. The start release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
    R/3 Enterprise extension set 1.10 or earlier.
    2. The target release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
    R/3 Enterprise extension set 2.00 or higher.
    Do you know a transaction o report Sap which provides this information?
    Thank in advance.
    Sergio

    Within SAP, select System -> Status...  In the pop-up box, click the details button in the SAP System data section and you'll get another pop-up with system component information.  It's been a couple of years since I did the Treasury migration for our upgrade from 4.7 to 6.0, but I believe the component you're looking for is EA-FIN.  The Release column will have either 110 (for extension set 1.10) or 200 for (2.00).
    Regards,
    Shannon

  • Error in PHASE PREP_EXTRACT/PREIMP: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP4

    Hello,
    I'm currently in upgrading a SAP R/3 4.7 system to a SAP ECC 6.0 EHP4.
    Therefore I followed the Upgrade Guide from marketplace - installation- and upgrade guides - SAP ERP - SAP ERP 6.0 - SAP Enhancement Package 4 for SAP ERP 6.0 - Upgrade Guide SAP ERP including EHP4 SR1 - Unix on MaxDB.
    I downloaded media from marketplace/swdc - Installations and Upgrades - SAP Application Components - SAP ERP - SAP ERP ENHANCE PACKAGE - EHP4 FOR SAP ERP 6.0 / NW7.01 - Upgrade.
    I'm starting upgrade with upgrade master DVD 51036889_1 and      51036889_2.
    Now upgrade breaks down in phase PREP_EXTRACT/PREIMP with error:
    Severe error(s) occured in phase PREP_EXTRACT/PREIMP!
    Last error code set: Single errors (code <= 8) found in logfile 'PREIMP.ELG'
    PREIMP.ELG says:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    R3trans preimport and RETURN CODE in R710VPE.REX
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
    Kernel is stored in /usr/sap/REX/SYS/exe/run and database is ADA (maxdb).
    File R710VPE.REX says:
    4 EPU201XBEGIN OF SECTION BEING ANALYZED
    4 ETW000 R3trans version 6.13 (release 640 - 17.02.10 - 13:07:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 07.03.2011 - 15:28:36
    4 ETW000 control file: /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
    4 ETW000 > import
    4 ETW000 > file='/usr/sap/REX/upg/abap/bin/R710VPE.SAP'
    4 ETW000 > safeandslow=yes
    4 ETW000 > buffersync =yes
    4 ETW000 > commit     =1048576
    4 ETW000 > importtruncated =yes
    4 ETW000 R3trans was called as follows: R3trans -w /usr/sap/REX/upg/abap/tmp/R710VPE.REX -u 1 /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
    4 ETW000 active unconditional modes: 1
    2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
    4 EPU202XEND OF SECTION BEING ANALYZED
    Can anybody help me out here?
    Regards,
    Julia

    Hello,
    I run 'R3trans -x' command, but there was no problem - connection to database was working.
    Problem was following:
    Before starting the sdt service on host, I set environment variables JAVA_HOME and LD_LIBRARY_PATH for sidadm. That's not neccessary and that was the problem. Without setting these variables it is working now.
    Thanks,
    Julia

  • UPGRADE FROM ECC 5.0 TO ECC 6.0 Ehp4

    Hai,
    Can any one tell me the upgrade strategy from ecc 5.0 to ecc 6.0 Ehp4,also before we upgrade to Ehp4 do we have to upgrade to ecc 6.0 ?If no plz provide me with the link for latest documentation on this .
    -regards
    Srinivas Bitra

    Hi Srinivas,
    You can upgrade both in single shot.
    You can include EHP4 along with ECC6.0 version upgrade. in BIND_PATCH phase upgade will prompts you to include EHPs if you want. so there you can include your EHP with SAP version upgrade.
    You can get all these details in Upgrade guide.
    -Srini

  • Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

    Dear Friends
    We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
    We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
    Could you please help us what needs to be done immediately after upgrade.
    Regards,
    Bharathi

    Dear Nils,
    Thanks for the support.
    Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
    Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
    1. Preparation
    2. Unicode Preconversion Phase in SAP Basis 4.6C
    3. Upgrade Process
    4. Unicode Conversion Phase
    5.  Unicode Conversion Completion Phase
    6. SAP Notes
    Regards,
    Bharathi

  • Old Appraisal System (SAP R/3 4.7 ITS) upgrade to SAP ECC 6.0, Ehp4

    Hello experts,
    We are currently on SAP R/3 4.7 (using ITS) and will be upgrading to ECC 6.0, Ehp4 (using Netweaver Portal). This upgrade will be purely technical, no changes to existing talent modules.
    Our employee performance appraisals are currently accessed via ITS using the Old Appraisal System. Can you tell me if it is even possible to link the old appraisal system to the NW portal?
    If yes, what kind of changes are required here? Which iviews will I need to activate?
    All of your advice is greatly appreciated. Thank you in advance.
    Dina

    hi,
    THe old appraisal system runs on ITS , true .
    In the new ECC 6 , there is a built in ITS , which should allow you to still run the old services . But it makes sense to explore the newer functionalites offered in EHP4.
    Regards
    sameer

  • Upgrade project : from SAP R/3 4.6C to ECC 6.0 by using SAP Data Services

    Hi All,
    My client is upgrading from SAP R/3 4.6C to ECC 6.0
    We are planning to use SAP Data Services(Data Integrator) in the upgrade plan from SAP R/3 4.6C to ECC 6.0 for Data Migration.
    we have no idea whether we can use this SAP Data Services(Data Integrator) in SAP upgrade data migration.
    The bottom line is we have to make use this Data Services (Data Integrator) product in our upgrade plan for Data Migration.
    Please tell us if anybody already used it such kind of scenario in a data migration project with Data Services(Data Integrator).
    If we can use Data Service(Data Integrator) what are the pros and cons in using this Data Services(Data Integrator).
    Thank You,
    Ashok

    My opinion is you would want to utilize SAP tools to port the data - our SAP BASIS administrator is out this week but we can provide exact tool names when he returns.  ELM (External List Management), IDOC are some of the tools.
    You could use DS/DI to export, cleanse, deduplicate the records prior to importing with SAP tools if that is your end goal.
    We also offer a data quality tool that extends DS/DI to cleanse/deduplicate name/address records as they are entered into the system.  It also comes with batch tools to cleanse/dedup the entire systems name/address information.  See Data Quality Management for SAP for further details.

  • ECC Upgrade from ECC 5.0 to ECC 6.0 EHP4 - impact on XI 3.0

    Hi,
    We are palnning for upgrade our ECC System from ECC 5.0 to ECC 6.0 EHP4. We do not have any plan of upgrade on XI, which is on XI 3.0.
    After ECC upgrade please provide the impact on XI 3.0 ?
    Will XI 3.0 able to work with ECC 6.0 without any change or any change is required in the XI configuration level, please specify?
    Thanks.

    >>Will XI 3.0 able to work with ECC 6.0 without any change or any change is required in the XI configuration level, please specify?
    As far as I know, no change is required in XI configuration.
    Regards,
    Praveen Gujjeti.

  • Upgrade SAP ECC 6.0 with SPS 12 to EHP4

    Hi!
    I would like to update a SAP ECC 6.0 system with EHP4. 
    I am on Windows 64 Bit with Oracle.
    My current SP stack of SAP ECC 6.0 is 12.
    The questions are:
    Does the SPS 12 of SAP ECC 6.0 fullfil the requirements for the SAP EHP4-Upgrade?
    If not what is the strategy to upgrade SAP ECC 6.0 system with SPS 12 to EHP4?
    Any helpful information will be very appreciated!
    Thank you!

    Hi
    You can check the below notes
    Note 1143022 and 1134872 - Installation of SAP Enhancement Package 4 on SAP ERP 6.0
    Regards
    Uday

  • Does anybody know benefices of upgrading SAP ERP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10?

    An upgrade of ERP SAP from version  ECC 6.0 EHP 7 to ECC 6.06 EHP 10 is being planned in the company I work for. However, I don´t know what the benefices are to   implement this upgrade so I wonder if someone knows benefices of upgrading SAP ERP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10?
    Regards, Alejandro

    Hi _Miguel
    I am going from ECC 6.0 to ECC 6.06. However, I don´t know what the benefices are to   implement this upgrade so I wonder if someone knows benefices of upgrading SAP ERP from version 6.0 to 6.06
    regards, Alejandro

  • Upgrade from SAP R/3 Enterprise 4.70 to ECC 6.0

    Hi experts,
    I am currently trying to build some knowledge for my final project. (Working as an apprentice in computer science atm)
    Main goal of the project is to upgrade our dev system to ECC 6.0.
    As far as I understand it, ECC 6.0 ONLY works with NetWeaver 7.0. Do I need to upgrade to NW7 before I upgrade to ECC 6.0 or is there a all-in-one package, which upgrades both at once?
    I browsed through a few upgrade guides but didn't really find an explaination I could understand...
    Could someone describe the basic steps for such an upgrade? (Like: Copy System - Upgrade NW - Install Components....)
    Kinda desperate
    Thanks in advance!
    Sandro Bollschweiler
    P.s.: I hope I used the right Forum for my question...

    Hi,
    When you upgrade to SAP ERP 6.0 (ECC 6.0), the underlying technology within the SAP R/3 4.7 system is automatically upgraded to the SAP NetWeaver 7.0 version. It is one upgrade;
    SAP R/3 4.7   -
    > upgrade -
    >  SAP ERP 6.0
    SAP Web AS -
    >  SAP NetWeaver 7.0
    The upgrade guides are you best place for information. The SAP ERP 6.0 has the steps to follow and all requirements.
    For installations, please see the aptly named installation guide title "Master guide - SAP ERP 6.0". Both the upgrade and installation guides are available at service.sap.com/instguides.
    For system copy info, see the SDN page: System Copy and Migration
    There is some demo examples here too
    All the best,
    Mike.

  • SAP ECC 6.0 EHP4 installation with ABAP+JAVA stack

    Hi,
    I need to install SAP ECC6.0 EHP4 with ABAP+JAVA stack on windiws server 2008 with oracle.
    I have read that for this, we need to install ECC 6.0 EHP4 ready and then upgrade to EHP4 using ehpi installer.
    I have found the documents seperately for ABAP and JAVA stack and not for ABAP+JAVA.
    I need clarifications on these.
    1.Do we need to install ABAP and JAVA instances seperately with EHP4 and then upgrade(In that case I have to install both instances on single host)?
    2.Should we give seperate <SID> for both instances and create seperate databases?
    3.Hard disk requirement for this set up.(We have 150 GB including C drive)
    4.Steps to perform after installing ECC6.0 EHP4 ready
    5.Please send me the doc. if anyone has
    Anyhelp would be highly appreciated.
    Regards,
    Surya

    > 1.In the installation document for EHP4 ready for SAP ERP 6.0 ABAP.It is mentioned that this installation contains only basic EHP4 for ERP 6.0 and we need to install additional EHP4  functionality in the SAP ERP 6.0 -EHP4 ready system.
    > It states that atleast Support pacakge stack (SPS) 1 of SHP4 needs to be installed.So If I install this stack using EHPi installer in the post installation activities my SAP ERP 6.0 EHP4 will be in place?Please confirm.
    Yes..
    >
    > 2.Can I install SAP SR3 with dual stack and upgaradte it directly to EHP4 at a time?
    Yes you can do it.....as SAP still supports dual stack ERP systems to EHP4
    >
    > Any solutions or suggestions from others also welcome.
    Why do u want a dual stack ECC ystem?? any specific requirement???
    Regards,
    Nirmal.K
    Edited by: nirmal konchada on Feb 2, 2011 12:16 PM

  • Configure ECC 6.0 EHP4 in SAP Solution Manager SP15

    Hi all,
    I just upgrade a system from R/3 4.6c to SAP ECC 6.0 EHP4 NW 7.01. I want to configure the system in SAP Solution Manager just upgraded to SP15. But I don't understand how I must to configure the system and to assign a logical component. It seems not to be the same possibilities between System configuration and Logical configuration.
    For system configuration I can choose product version EHP4 FOR SAP ERP 6.0 / NW7.01 and a full list of usage type
    For logical component I only found product SAP ERP ENHANCE PACKAGE and a very short list of version and usage type (??)
    Is someone know if it is normal or if it is necessary to patch solution manager ?
    Is ther a documentation existing to configure ERP EHP4 systems ??
    Thanks for your answer.
    Regards
    Gerard

    I have not seen any document to configure EHP4 systems specfically.
    I do not think, Solman SP15 should create any problem in that. But, since you are upgrading your landscape to EHP4, so why leave solman to SP15 instead of Ehp1 (SP18/19/20)...
    You might want to have a glance over some notes
    Note 1283307 - SMSY: Product version cannot be determined correctly
    Note 1301106 - SMSY: Enhancements and errors in Enhancement Package 1
    Note 1320545 - Updating the product version in SMSY

Maybe you are looking for