Upgrade SAP from release 701 to 710

Hi guys,
We have SAP ERP 6.0 EHP 4. Our Kernel release is on version 701, our Basis/ABAP components also on release 701, for example SAPKB70105, SAPKA70105 etc. Recently, we had an issue which we raised with SAP and they asked us to upgrade to release 710. Please outline us the steps how to do this?
Any suggestions are welcome.
regards.

Hi,
At this stage, they addressed you that the system is need to upgrade 710. Now, I can say that it is not possible, because there's no release Ehp4 for SAP Ecc 6.0 running on SAP Netweaver 7.10 stack.
Consequently, you should ask first that how can you run Ehp4 for SAP Ecc 6.0 over SAP Netweaver 7.10 to SAP AGS. This is because, as I mentioned that the latest release is Ehp4 for SAP Ecc 6.0/NWV 7.01 on SAP Marketplace. There must be a misunderstanding, in this issue.
Best regards,
Orkun Gedik
Senior SAP Netweaver and Development Consultant
SAP Technical Architect

Similar Messages

SAP OS kernel upgradation from release 700 to 710

Dear Sir,
We are upgrading kernel release 700 (185) to 710 (160).
In this we are getting an error of saposcol i.e saposcol is not started automatically when we run startsap.
Currently we are running our application on Kernel release 700 patch level 185.
Should we have to upgrade application pathes after to upgrade the kernel release 710 patch level 160 ?
Is there any dependency in between SAP Application Patch and SAP Kernel Patch or we can run the application on current application patch level, kindly suggest
Regards,
Mushtaque

Dear Mushtaque,
I am not clear on your purpose for kernel upgrade from release 700 to 710. Your SAP_BASIS and SAP_ABA version showing as 710 or 700. If it is 700, there is no reason to change your kernel release. The latest patch is 201. You should go for this patch incase release 700.
Also, as a post processing steps you need to run saproot.sh with root user after kernel upgrade.
Also please find below link for saposcol options.
http://help.sap.com/saphelp_46c/helpdata/en/c4/3a6c40505211d189550000e829fbbd/content.htm
Regards
Gautam

Upgrade SAP from ECC 6.0 EHP4 to ECC 6.0 EHP7

Dear all,
We are using ECC 6 ERP 4 SP5 with oracle 10.2g and Netweaver 7.0 EHP1.
Other system release
CRM 7.0 SP5 & CRM JAVA Release – NW 701 SP3
BI Release – NW 701 SP5 BI CONT 7.04 & BI JAVA Release – NW 701 SP3
We are planning to upgrade ECC 6 ERP4 SP5 to ERP 6 ERP7 SP1, Could you please suggest for compatibility version for CRM & BI with ECC6 EHP7
And any document for EHP7 up gradation procedure and what is the impact or change made in system after upgrade from EHP4 to EHP7
Regards,
Ajay

Hello
The nightmare is going on... this point has been discussed a year ago (Re: Comapatability between EHP7 and SAP Netweaver BI 7.0 EHP1) and the conclusion was that you only need to upgrade HUB satellite systems... and a BW system is not an HUB.
The only possible issue would be if the java stack of the BW system is used directly by the ECC system.
Did not find any information on the necessity to upgrade the CRM, so I think you should keep it as it is.
This are even getting worst because sometime sap support (OSS) are not able to provide clear answers (Interoperability btw ERP 6.0 EhP7 and SAP NW/BW 7.0)
Best regards
Strategy beyond SAP Business Suite 7 Innovations 2011 - Landscape Governance - SCN Wiki
1388258 - Version Interoperability within the SAP Business Suite
In order to use the new JAVA EE 5 capabilities and benefit from the improvements of SAP NW 7.3 the version interoperability range has been moved upwards for SAP Business Suite core applications with Release to Customer (RTC) from 2013 onwards.
This means that SAP NetWeaver Systems 7.30 or higher are required if SAP Business Suite applications are based on or operating with those central Systems (Enterprise Portal, Business Warehouse, Process Integration).
Customers wishing to utilize SAP Business Suite applications with RTC from 2013 onwards, that require one of these central SAP NetWeaver Systems, will have to upgrade their central NetWeaver Systems to 7.30 or higher before upgrading e.g. to SAP Enhancement Package 7 for SAP ERP 6.0.

Upgrading SAP from one version to other

Hi
I would like to know the various procedure for SAP updgrade project and the technical (ABAP) work involved in it and when it will come to picture while upgradation

hi
good
in care of a upgradation you have to follow the following procedure as a vendor.
1-SAP Release documents for the particular documents
2-Availability of the proper Functional Spec
3-Availability of the proper Technical Spec
4-Servers those have been properly upgrade with the required version of SAP.
Thanks
mrutyun^

Upgrade CFM from Sap R/3 Enterprise (4.7) Sap to ECC 6.00

Hello,
We are in a project of upgrade Sap from Sap R/3 Enterprise (4.7) to Sap ECC 6.00. Our question is particularly for CFM component migration/upgrade.
As we checked we have activate the extension set:
EA-FIN: Financials Extension
EA-FS: Financial Services
According with the Component Version Data the extension set EA-FINSERV has the release 2.00. However, in order to execute the CFM migration with transaction TPM_MIGRATION we are not sure if our CFM installation is on release 1.00 or 2.00.
In the other OSS note 858966 mentions the following conditions to start points migration:
1. The start release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
R/3 Enterprise extension set 1.10 or earlier.
2. The target release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
R/3 Enterprise extension set 2.00 or higher.
Do you know a transaction o report Sap which provides this information?
Thank in advance.
Sergio

Within SAP, select System -> Status... In the pop-up box, click the details button in the SAP System data section and you'll get another pop-up with system component information. It's been a couple of years since I did the Treasury migration for our upgrade from 4.7 to 6.0, but I believe the component you're looking for is EA-FIN. The Release column will have either 110 (for extension set 1.10) or 200 for (2.00).
Regards,
Shannon

Upgrade from BW 701 Higher version

Dear Experts,
What are the best possible ways to upgrade from BW release 701 with Level 009 .
Either we can upgrade to 7.4/7.3 if so either it will supports BO 4.1 sp3 & Bics Connection.
What are the steps need to check before after upgradation from 701 to 7.4 /7.3.
Regards,
Seshu.P

you are posting in a wrong space. Please move your question to Netweaver/BW area.
BI Platform is for SAP Business Objects products.

Upgrade project : from SAP R/3 4.6C to ECC 6.0 by using SAP Data Services

Hi All,
My client is upgrading from SAP R/3 4.6C to ECC 6.0
We are planning to use SAP Data Services(Data Integrator) in the upgrade plan from SAP R/3 4.6C to ECC 6.0 for Data Migration.
we have no idea whether we can use this SAP Data Services(Data Integrator) in SAP upgrade data migration.
The bottom line is we have to make use this Data Services (Data Integrator) product in our upgrade plan for Data Migration.
Please tell us if anybody already used it such kind of scenario in a data migration project with Data Services(Data Integrator).
If we can use Data Service(Data Integrator) what are the pros and cons in using this Data Services(Data Integrator).
Thank You,
Ashok

My opinion is you would want to utilize SAP tools to port the data - our SAP BASIS administrator is out this week but we can provide exact tool names when he returns. ELM (External List Management), IDOC are some of the tools.
You could use DS/DI to export, cleanse, deduplicate the records prior to importing with SAP tools if that is your end goal.
We also offer a data quality tool that extends DS/DI to cleanse/deduplicate name/address records as they are entered into the system. It also comes with batch tools to cleanse/dedup the entire systems name/address information. See Data Quality Management for SAP for further details.

I've upgraded the Discoverer from release 4 to 10.2.0.3

Hi guys,
I've upgraded the Discoverer from release 4 to 10.2.0.3 on two of my test systems.
the difference between the two test system is that one is SSL enable and the other one is not.
On the test system that is not SSL enabled users can access Discoverer via EBS fine but
on the tests system that has SSL enabled users cant so now they have to go directly to
the Discoverer link to access it. I've logged an SR with Oracle and they told me to edit the ssl.conf file
for the Discoverer side which I did and I placed the file directories and the locations of the certificates in that ssl.conf.
How can I get Discoverer to through EBS when SSL is enabled.
Thanks

Hi,
Firstly, you need to check that the ICX: Discoverer Launcher system profile has the correct https url to launch Discoverer.
Rod West

Upgrade Oracle Database From Release 11.1.0.6.0 to Release 11.2.0.1.0

Dear Experts ,
I need the procedure to do the upgrade Oracle DB From Release 11.1.0.6.0 to Release 11.2.0.1.0
We have RAC Setup, OS windows 2003 R2 Server Service Pack 2
I have 3 instance Epprod, Epval, Mnlptprod
I am using the Same server as an application server as well.
Server Specification
E5540 @ 2.53GHz
2.53 HGz, 15.9 GB of RAM
Please your help highly appreciated

Hi,
Please refer the following links,which may help you in upgradation:
http://www.oracle.com/technetwork/database/upgrade/best-practices-for-upgrading-11gr2-174946.pdf
http://docs.oracle.com/cd/E14072_01/server.112/e10819/intro.htm#i1008321
http://www.ludatou.com/?p=287
http://www.oracledba.org/upgrade/Upgrade_11gR1_RAC_to_11gR2_RAC.htm

EBS Upgrade from Release 11.5.10.2 to 12.1.3 - SLA Issues

Hi,
Before upgrading our EBS from Release 11.5.10.2 to 12.1.3, Patch 5233248 has been installed , and Concurrent Program "SLA Pre-Upgrade Program" has been registered and enabled correctly (See Note : 427639.1 )
While running this Concurrent Program , on EBS 11.5.10.2, through "General Ledger Super User" Responsibility, the program ran several seconds.
Parameters Used :
Migrate all sets of books: Yes
Start Date: 01-JAN-2010
Are there Pre-Requisits while running this Concurrent Program ?
Regards,

Hi;
Please see:
R12.0 and R12.1: FAQ for the SLA Upgrade: SLA Pre-Upgrade, Post-Upgrade, and Hot Patch [ID 604893.1]
Regard
Helios

HOW TO UPGRADE FROM Release 10.2.0.1 TO 10.2.0.2

Hi,
HOW TO UPGRADE FROM Release 10.2.0.1 on Linux TO 10.2.0.2 ? Should we apply a patch ?
Thank you.

thank you. Of cours, I looked at metalink site for
RDBMS patch familly, but I did not find any for
upgrading from 10.2.0.1 TO 10.2.0.2
Regards.
Message was edited by:
user522961What's your target OS ?
Why are you specifically want this version?
As you can see from Oracle download page, some OS come with 10.2.0.2 directly.
http://www.oracle.com/technology/software/products/database/index.html
Oracle Database 10g Release 2 (10.2.0.3) for Microsoft Windows Vista
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (x64)
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (64-bit Itanium)
Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86-64
Oracle Database 10g Release 2 (10.2.0.1.0) for Linux Itanium
Oracle Database 10g Release 2 (10.2.0.1.0) for Linux on Power
Oracle Database 10g Release 2 (10.2.0.1.0) for AIX5L
Oracle Database 10g Release 2 (10.2.0.1.0) for HP-UX PA-RISC
Oracle Database 10g Release 2 (10.2.0.1.0) for HP-UX Itanium
Oracle Database 10g Release 2 (10.2.0.2) for HP Tru64 UNIX
Oracle Database 10g Release 2 (10.2.0.2) for HP OpenVMS Alpha
Oracle Database 10g Release 2 (10.2.0.2) for OpenVMS Itanium
Oracle Database 10g Release 2 (10.2.0.2) for Solaris Operating System (x86)
Oracle Database 10g Release 2 (10.2.0.1.0) for Solaris Operating System (x86-64)
Oracle Database 10g Release 2 (10.2.0.1.0) for Solaris Operating System (SPARC) (64-bit)
Oracle Database 10g Release 2 (10.2.0.2) for z/Linux
Oracle Database 10g Release 2 (10.2.0.2) for z/OS (OS/390)

Upgrading sap programs from one version to another version

Hi All,
I want to know how to upgrade sap programs from one version to another version,Please help me...
Regards,
Raj.

The seriousness and the complexity of the upgrade is primarily dependent on the version of the older SAP system. The Upgrade from 4.6 -> 4.7 is relatively easier and faster than that of an upgrade from 3.0 -> 4.7.
Most of the function modules in the older system have been reworked and would be marked as obsolete in the target version. (This could be seen in EPC Error Analysis & warnings).For example Function modules like Upload, Download, WS_Download, WS_Upload,WS_File_Delete, WS_Filename_get, Popup_to_confirm_step etc. These obsolete Fm's can be easily replaced with Fm's like Gui_Upload,Gui_Download, etc. There are few other complex Fms for which you have to do through R&D to find out the replacements.
Apart from replacing obsolete Fms one has to correct those syntax errors that may occur in the target version. There is a lot of variations in Syntax standards across versions.
Further more many transactions would have been reworked. Some Fields would be missing in the old system or a field would have been made a Key-Field in the new version , some screens would be missing or would have been addded. Also some Tables would have been flagged as obsolete and we need to find replacement for those obsolete Database tables.
It would be wise to do a R&D for all the programs in the system before Upgradation. This would really give us an idea about the complexity of the task and we can plan our Upgrade work effectively.
regards,
cartik

Can we migrate SAP 40B release system from windows NT to windows 2003.

Hi,
We want to know can we migrate SAP 40B release system from windows NT to windows 2003 server; if yes, please share with us the OS migration document.
Regards,
R Mav

> Our SAP 4 O B is on windows NT and oracle version is 8.0.5 and wants to do OS migration from NT to win. 2003.
Neither Oracle 8.0 nor 8i were releases on Windows 2003, they won't work and are not released.
So I'm afraid the only way you can go is Windows 2000.
Markus

Cannot open survey files from email after upgrading SAP gui to 720

Cannot open survey files attachments from email after upgrading SAP gui from 640 to 720.
Tried uninstalling & reinstalling but still error persists,
Error is : cannot split connection string: /h/server name/s/sapdp00 ( from SAP GUI security )
Please advise.

Can't say I have seen this error before but if it is pertaining to the new security module within 7.20, which are much more strict then 6.40, I would look under the SAP GUI configuration options. Focus on Security > Security settings.
There are pages and pages of rules which can be defined.
A test could be to disable all of them on an isolated machine and set them to allow and see if your problem persists. If the error is resolved, it is something in there you need to address.
Regards,
Zecher

Not able to increase SAP kernel release 6.40 patch level from 43 to 71

Hi Guru's,
I have to update SAP kernel release 6.40 patch level from 43 to 71 but not able to do.I am running solution manager 3.2 on Oracle 9i and Win-2003 OS.
Please provide the solutions .
I have downloaded kernel patch from Path at Service matket place ---Support Packages and Patches" SAP Technology Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 3.2" Entry by Component" SAP Solution Manager-SAP KERNEL 6.40 32-BIT UNICODE-Windows Server on IA32 32bit-ORACLE-
SAR SAPEXEDB_71-20000254.SAR Kernel Part II (for Basis 640/620) 71
I followed following Steps:
1. Copied the patch into a temporary directory on system.
2. Unpacked the downloded SAPEXEDB_71-20000254.SAR Kernel Part II (for Basis 640/620) 71 patch .
3. Stoped the SAP System using MMC.
4. Saved the kernel directory by backup or by copying into a separate backup directory. (\usr\sap\<SAPSID>\sys\exe\run)
5. Re-started the server.
After logging again in SAP client 000 on checking found server patch level coming same as previous one .
Its not got updated and due to this in Tcode- SPAM I am getting error message :'The OCS package SAPKITL318 requires a kernel with Release 640 and patch number 71. The kernel you are currently using has a lower version.'.
Help!!!!
Regards
Gaurav

Hi Guru's,
Output for transaction SM51 enclosed below:
Application server gauravpc1_GSM_00
SAP R/3 Kernel information
SAP R/3 Kernel 640_REL
Database Client Library OCI_920_SHARE
created in NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
created on Nov 4 2004 23:42:53
Support Level 0
Kernel Patch number 43
Source ID 0.043
DBSL Patch No. 172
ICU Version 2.6.1 Unicode Version 4.0
libsapu16 Version 2.0023 Nov 4 2004 20:04:27
Supported environment
SAP database version
610 , 620 , 630, 640
Database ORACLE 9.2.0..
ORACLE 10.1.0..
ORACLE 10.2.0..
Operating system
Windows NT 5.0, Windows NT 5.1,Windows NT 5.2
one more thing I have aloso tried to upload Kernel latest patch level 175 using same procedure but that too was not working.
HELP!!!!!!!!!!!!!
Regards

Upgrade SAP from release 701 to 710

Similar Messages

Maybe you are looking for