Upgrade SAP Solman

Boa noite colegas de SAP
Gostaria de saber se eu poderia usar o SAPEHPI para fazer o update de meu sistema solman para SP28, temos uma versão muito antiga e gostaria de fazer esse update diretamente, na minha dúvida anterior gostaria de saber quais são os benefícios dessa nova versão 7.01 SP28.

Bom dia Marcos, segundo a nota 1169247, você não pode utilizar o SAPEHPI.
- You can perform the update only using SAINT and JSPM. Using the EHPI is not intended and is not supported. Ignore the
corresponding message in transaction SAINT.

Similar Messages

After Upgrading the SOLMAN to SPS12 the SAP EWA generation to word fail!

Hello,

after Upgrading the SOLMAN system to SPS12 the SAP Early WatchAlert generation to word fail. We use MS Word 2002 SP3!
EarlyWatch Alert Report, EarlyWatch Alert Report with Graphics, all Service Level Reportings -
No report can generate to a word report!
the following Error message appears:

Information:
Document generation failed

After confirming the information poopup, this Error message appears:

Error: Exception occurred (program: , include: , line: 0)., Program CL_DSMOP_HTML_SERVICE_OPEN====CP, Include CL_DSMOP_HTML_SERVICE_OPEN====CM00N, Row 103 
With SPS10 all generations were successfully!
Has anybody an idea?

Thanks a lot!

Regards,
matthias isenburg

Hello,
This is a known problem in the meantime!!!
We use MS Word 2002 SP3! This Version ist too old! The Templates which the Solman want to use are now in MS Word 2003 (minimum)!
The solution is to upgrade MS Word!!!
Best Regards,
Matthias Isenburg

How to upgrade from Solman 7.0 to 7.0 EHP1?

Hi,
In the SAP note 1169247, it talks about doing the upgrade from 7.0 to EHP1 using SAINT and JSPM. But in the Upgrade Guide SAP Enhancement Package 1 for Solution Manager 7.0 - UNIX Oracle˝, it talks about running the upgrade using an Upgrade MAster DVD.
1. Now is this the same as the EHP installer? If so, why is it not mentioned anywhere in the upgrade guide that we have to use EHPI? If not, what is this Upgrade Master installer?
2. Should I use SAINT/JSPM for the upgrade to solman 7.01?
Your answers to these questions will be highly appreciated.
Thanks,
Ajay

Hi Ajay,
I had the same question a few day's ago.
The difference between these two methods are the word updarte and upgrade.
If you are on Solman 7.0 you have to do a update with SPAM/SAINT.
If you are on Solman 3.0 or something you have to do a upgrade with the master dvds. You can read this on one of the first sites of the upgrade guide.
So you have to use SPAM/SAINT, and the Update Guide for EHP1 Using SPAM/SAINT will help you.
[Update Guide on Marketplace|https://websmp101.sap-ag.de/~sapidb/011000358700000427772009E.PDF]
Regards
Tobias

Upgrade to Solman 7.1 from Solman 7.01

Dear experts,
For the upgrade to Solman 7.1, I saw there were high impacts for ChaRM and Service Desk !
My questions are:
What are these impacts ?
I saw there was CRM Web UI to manage tickets, is it mandatory to install CRM to use it ?
Best,
Alexiel Green.

Hello Alexiel,
Please read:
Solution Manager 7.1 - Installation from scratch or upgrade - Take a look at the real cost
https://websmp203.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=&_HIER_KEY=5011000358700000…
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0ed3f8b-ac55-3010-779c-aa6eebf10bf1?overridelayout=t…
CRM Web UI comes with Solution manager 7.1 version and it's included:
781448 - Support Package levels for SAP Solution Manager installations/upgrades
BR,
K>

Unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

Hi,
For SU01 role removal, you do not need S_USER_AGR with 02, and as you mentioned both authorizations available in production, if so trace should not show you the S_USER_AGR with 02 with RC=04.
I would recommend to do role comparison for the user performing the activity. and then check if you have the S_USER_AGR with 02 in user buffer SU56.
But ideally it should not ask you S_USER_AGR for 02 through SU01, so please take help of abaper to debug it.
Also put trace in non-prd to see if S_USER_AGR is getting checked with 02 for removal through SU01.
BR,
Mangesh

Web Service is not working after Upgrade SAP EHP6

Hi ,
Recently we upgraded SAP ECC 6.0 to EHP 6.
We have a custom web service which is consumed in .NET Application to get the Sold To from Sales Order.
the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
When I tested the Service in WS Navigator in SAP, it is working fine.
We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
we did the below steps.
Regenerated the configuration
Re imported the Certificates
Activated the service in SICF.
Please let me know if anybody have same problem or if any steps we are missing.
thanks.
Uma

after changing the .NET Application , Service is working fine.

Upgrading SAP ESS and MSS after HR upgrade in ECC 6.0

Hello
I am new to SAP netweaver.
Our landscape has an ECC 6.0 system integrated with EP 7.0.
We recently upgraded our SAP HR from 600(SP 48) to 600(SP61) and EA HR component from 603(SP 22) to 603( SP 35).
After the upgrade we came to know that the portal users are facing some issues with Etime application on portal, i did a bit of searching and found that we have to upgrade SAP ESS, MSS and ERP5COM components. (http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES)
My questions are:
1) Can we directly apply SP's for ESS, MSS and other components as i cannot find any prerequisites required to be met before they have to applied?
2)If we have ESS SP 04 and the required version is ESS SP07, can we directly apply SP 07 or we have to first apply in a sequence SP05, SP06 and then move to SP07?
Thanks a lot!
Varun

Hello,
1) If a developer modified the ESS/MSS package, you need to ask the developer before you apply the patches. In this case, you find the "local version is modified" text in the corresponding package.
2) Java Patches are cumulative, which means that higher Patch contains all corrections of lower Patches.([SAP Note 1249886|https://service.sap.com/sap/support/notes/1249886])
Laszlo

Error while upgrading SAP R/3 Enterprise 4.7 to SAP ECC 5.0

Dear SAP,
We are on the process of upgrading SAP R/3 Enterprise 4.7 with Ext:110 to SAP ECC 5.0.But during the VERSCHK_INI phase an error is been thrown showing that
"The start release configuration :
SAP_ABA :620
SAP_APPL :470
SAP_BASIS :620
SAP_HR:470.....is not supported "
At this stage we decided to continue with this by ignoring the VERSCHK_INI phase,but it gave us a warning that to continue with the next phase(TOOLVERSIOn_INI phase) we require a password.
we searched in several documents even in the documents along with the cd but was not able to find a password for this or a solution for the error in phase VERSCHK_INI.
I request team SAP to help us in this regard.Expecting your reply ASAP.
Thanks and Regards
Anantha Raman E.

Were you able to find a resolution to this problem. We are also having a similar problem in our prepare phase and cannot find anything to help us as yet.
Thanks,
Barry Keating

Can i upgrade SAP business One version 8.6 to 9.1

Hi Expert,
Can i upgrade SAP business One version 8.6 to 9.1 directly.please assist me.
Regards,
Mizan

Hi,
There is no 8.6 version for SAP B1. Please advice correct version with PL.
Thanks.

Steps to upgrade SAP B1 8.8 PL10 to 8.81 PL05

Hi All,
Please could someone guide me how to upgrade my system from 8.8 PL10 to 8.81 PL05. I have the downloaded file available with me with a "upgrade" application button. Should I directly click on "upgrade" button in the 8.81 PL05 folder and follow accordingly, or we need to uninstall certain elements of existing 8.8 PL10 version?
Thanking you in advance!!!!
Golden

Hi Golden,
For more information regarding upgrade SAP Business One application to version 8.81 please refer to the "Administrator's Guide 8.81 SQL" (chapter: 5 u2013 Upgrading SAP Business One), which can be found on the Documentation Resource Centre on the Portal.
http://service.sap.com/smb/sbo/documentation -> Documentation Resource Center for Release Family 8.8 -> System Administration
Regards,
Ladislav Meszaros
SAP Business One Forum Team

Error in PHASE PREP_EXTRACT/PREIMP: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP4

Hello,
I'm currently in upgrading a SAP R/3 4.7 system to a SAP ECC 6.0 EHP4.
Therefore I followed the Upgrade Guide from marketplace - installation- and upgrade guides - SAP ERP - SAP ERP 6.0 - SAP Enhancement Package 4 for SAP ERP 6.0 - Upgrade Guide SAP ERP including EHP4 SR1 - Unix on MaxDB.
I downloaded media from marketplace/swdc - Installations and Upgrades - SAP Application Components - SAP ERP - SAP ERP ENHANCE PACKAGE - EHP4 FOR SAP ERP 6.0 / NW7.01 - Upgrade.
I'm starting upgrade with upgrade master DVD 51036889_1 and 51036889_2.
Now upgrade breaks down in phase PREP_EXTRACT/PREIMP with error:
Severe error(s) occured in phase PREP_EXTRACT/PREIMP!
Last error code set: Single errors (code <= 8) found in logfile 'PREIMP.ELG'
PREIMP.ELG says:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
R3trans preimport and RETURN CODE in R710VPE.REX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
Kernel is stored in /usr/sap/REX/SYS/exe/run and database is ADA (maxdb).
File R710VPE.REX says:
4 EPU201XBEGIN OF SECTION BEING ANALYZED
4 ETW000 R3trans version 6.13 (release 640 - 17.02.10 - 13:07:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.03.2011 - 15:28:36
4 ETW000 control file: /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 > import
4 ETW000 > file='/usr/sap/REX/upg/abap/bin/R710VPE.SAP'
4 ETW000 > safeandslow=yes
4 ETW000 > buffersync =yes
4 ETW000 > commit =1048576
4 ETW000 > importtruncated =yes
4 ETW000 R3trans was called as follows: R3trans -w /usr/sap/REX/upg/abap/tmp/R710VPE.REX -u 1 /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 active unconditional modes: 1
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
4 EPU202XEND OF SECTION BEING ANALYZED
Can anybody help me out here?
Regards,
Julia

Hello,
I run 'R3trans -x' command, but there was no problem - connection to database was working.
Problem was following:
Before starting the sdt service on host, I set environment variables JAVA_HOME and LD_LIBRARY_PATH for sidadm. That's not neccessary and that was the problem. Without setting these variables it is working now.
Thanks,
Julia

Encounter a problem during upgrade sap r/3 4.7 to ecc6

Hi expert:
i encounter a problem during upgrade sap r/3 4.7 to ecc6
in START_SHDI_FIRST step.
here is the error msg~
MSSCRESPDEFN.LOG
Msg 2812, Level 16, State 62, Server Jack, Line 6
Could not find stored procedure 'dbo.sap_upg_getrelease'.
setuser
i checked MS SQL DB and found out that i only got 'erp.sap_upg_getrelease' but not dbo owner.
can any one tell me how to solve this problem?~
thanks.
Regards
Jack Lee

It's the kernel for the shadow the correct?.
Regards,
Alfredo.

Upgrade Sap R/3 4.6b to ECC 6.0 -unicode enabling

Hi,
I am going to work Upgrade Sap R/3 4.6b to ECC 6.0
My role only Unicode enabling syntax check.
Can any one explain what are the work involved in
Custom Reports, Custom Transaction and Screens, BDC, Enhancements and Exits(BTE), Script ,Custom DDIC
Particularly need information Sapscript forms
Regards,
Ram

Hi Ram,
For Unicode, transaction UCCHECK is your best friend. It will even tell you how to fix the error.
All programs Most of the time you will just go and set the Unicode Checks Active program attribute, save, activate.
- If there are Unicode errors, fix them.
http://iorboaz.blogspot.com/2008/03/sap-abap-solution-instructions-for.html
SAPScript - Not sure if it even needs Unicode-enabling. We are still in the middle of an upgrade. Will add more later.
Custom DDIC In our case, the BASIS team handled the Unicode conversion of the DDIC objects.I think they ran a consistency check first, then run SPUMG or something.
Search the web for a Combined Upgrade and Unicode Conversion Guide.
Hope this helps.

SAP SOLMAN 7.1 error in ATM for DBACOCKPIT

Hi Experts,
My client's SAP Solution Manager 7.1 has been displaying the error message - "Error in RDI back-end setup occured!", since last one week. I am unable to analyze this to resolution, as there is nothing I couldn't find closely relative in the standard database SAP Sybase 15.7. ASE server configuration guides or in the SCN itself for that matter, which would help me resolve this bugging error.
I have also checked in system logs but have always found different types/varieties of database errors everyday. I am attaching the error screenshots for your kind reference and consideration. Kindly note that I have worked on most databases previously in an efficient manner except for Sybase ASE, which is relatively new to me.
When I click on repair, I am getting the following error, which my SAP Basis PM/lead has told me its a generic error.
Upon clicking on yes, I am getting the unavoidable error shown below -
The error is - "Error in RDI back-end setup occured!", as i have stated above.
I have checked the ATM logs and history and they are fine. I am getting error only in the ATM queue as shown below -
I am also getting the same database errors in event viewer as to those in the system logs for SAP SOLMAN 7.1 server.
I would appreciate it very much if one of the Sybase experts would help me out here. Speaking of technical configuration for any database in conceptual terms, I perceive this error to be a space issue as mentioned in the ATM queue. I believe I have provided sufficient details. The OS here is the Windows server 2008 R2 version.
Kindly mention if you need more details for a speedy and possible error analysis and resolution
This is an emergency task for me as I need to resolve it on ASAP basis. Rest assured, points for all right answers will be awarded generously.
Thanks and regards,
M. Nizam

Hi Nizam,
Please share what is the database patch level for Sybase ASE 15.7
Additionall please review below SAP notes
1619967
SYB: DBA Cockpit Correction Collection SAP Basis 7.31
1558958
SYB: DBA Cockpit Correction Collection SAP Basis 7.02 / 7.30
1920025 DBACOCKPIT - Error 'Repair ATM' when started from different systems
Hope this helps.
Regards,
Deepak Kori

Upgrading sap business one version 800232 is not allowed

Hi All
I got this error when I tried to run an upgrade from SBO 2007A PL 42 to SBO 8.8 PL3.
Any suggestions.
Regards
Bongani

Dear Bongani,
i found something for this Error i hope it help:
Zusammenfassung
Symptom
In the connection setting step or database selection step, the following error dialog appears: "Upgrade SAP Business One from version xxx is not allowed. Contact your SAP business partner for support."
Other terms
Upgrade Wizard, Upgrade Path, Restriction
Reason and Prerequisites
Application error
Due to the nature of development cycles, it takes some time for SAP Business One 8.8 to merge bug fixes from latest released install base patches. As a result, some upgrade paths are restricted in order to avoid data loss/duplicate upgrade in certain cases. For example: a bug fix is applied on 2007 A SP01 PL07 and merged with 8.8 PL05. If the database in 2007 A SP01 PL07 is upgraded to 8.8 PL04, the fix will be lost. In addition, there is a risk of data loss if the fix involves some metadata change. So 2007 A SP01 PL07 can only be merged with version 8.8 PL05 and higher.
Solution
SAP intends to provide a patch or patches in order to solve the problem described.
The section Reference to Related Notes below will list the specific patches once they become available. The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number.
Please note that these references can only be set at patch release date.
SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.
In addition to the bug fixes listed in this SAP Note, this patch contains also the bug fixes from:
SAP Business One 2007 A SP01 PL06,
SAP Business One 2007 B SP00 PL14.
For more details, please see the SAP Notes under the "Related Notes" tab.
IMPORTANT: Please note that if you are on a higher patch than the 2007A/2007B patch levels listed above and upgrades to 8.8, this may result in unexpected issues and potential data loss as the upgrade path is not supported yet.
Best regards,
Indira

Upgrade SAP Solman

Similar Messages

Maybe you are looking for