Upgrade SBO 2005A PL 44

Dear all,
I will upgrade to SBO 2005A PL44, before I used SBO 2005A PL 43. I have met a problem about error reconcile and suggest to upgrade to solve this problem.
How this PL 44? What is stable patch and fix to use on application? Because if I have been upgraded it so I could not be downgrade.
Please let me know about this....
Regards,
agung

Dear,
For error reconciliation issue, SAP give a great improvement on 2007 Version.
In SAP Business One 2007 A & B the reconciliation engines have been unified & partial reconciliation on journal entry level is now fully supported. Any database that is upgraded from a lower version undergoes
a complex series of reconciliation upgrade algorithms, where any
reconciliation inconsistency is identified & a reconciliation upgrade (RU) journal entry is automatically created. This RU journal does not
document any accounting transaction, but simply creates an update in the 'Balance Due' column, thus notionally re-openeing previously
inconsistently reconciled transactions.
These RU journals are then available for internal reconciliation.
Please consult the 2007 Internal Reconciliation Upgrade(IRU)Landing Page:
Channel Partner Portal -> Solutions -> SAP Business One -> Hot Topics ->
SAP Business One 2007 Information Center -> New Single Reconciliation
Engine- A single engine reconciles the difference and eliminates the
previous reconciliation issue. More
Click on 'More' to be directed to the IRU Landing Page.
Here you will find 'How-to-Guides' in all supported languages, links to
Expert Training Sessions & links to other pertinent information.
You will also find available for download 2007 A & B upgrade simulation
tools. SAP recommends to subject a database that is planned to be
upgraded
This upgrade simulation tool employs all internal reconciliation upgrade algorithms & the application will display in the 'Internal
Reconciliation Upgrade Audit Trail Report' if a database is affected by
inconcistencies.
We will alway recommend you to upgrade to latest patch.
Wish the information above is helpful for you.
Regards
Apple

Similar Messages

Dunning wizard after upgrading SBO 2005A from PL12 to PL50

After upgrading from SBO 2005A PL12 to PL50, when I run the Dunning Wizard I don't see the Open Invoices for the customers. Is there a Setting that I have to setup or which can cause this problem.

Hi André,
Did you checked the parameters during the wizard already? For example are all levels included? Did you checked the dunning terms and conditions as well? Are you sure there are invoices that should be displayed?
Kind regards,
Joris Tettero

Upgrading SBO 2005A SP 01 PL 29 to SBO 2007A PL 00

Dear All,
I've heard that SBO 2005A SP 01 PL 29 could be upgraded to latest PL of SBO 2007A after upgraded into PL 00 of SBO 2007A. This info is hopefully useful.
Rgds,

Hi Jimmy and William,
I think there's a slight, but important misunderstanding - and I suspect that William may not have revisited this discussion:
Error importing oBusinessPartners with DTW 2005.0.16
...but that's no severe enough to get so upset, Jimmy, or?
Just to recap that:
SAP Business One 2005A SP01 PL22 is the last patch that you can apply before upgrading to SAP Business One 2007A if you want to participate in Ramp-Up for B1 2007!
...and currently you can only use B1 2007 - and get support from SAP when your customer IS accepted for the Ramp-Up!
Only after SAP Business One 2007A will go into "general availablility" this would change!
The upgrade paths for B1 2007 are as you described:
- Upgrade from any patch of an older release to a newer version using the specific Upgrade package is possible - and supported.
The "Upgrader" package is actually a patch that has been validated / released to be used for any upgrades from older versions.
- Direct Upgrades to later patches of the newer version (skipping the Upgrader) may technically work at first glance, but you can't be sure that no issues may occurr later - and in the end cost more time than you gained by overstepping one step in the upgrade process - and it may get you in "trouble" with SAP Support.
I am sorry, but I didn't phrase that correctly when I entered that comment!
But again, unless you are getting this customer into Ramp-Up for 2007 it is irrelevant for you anyway what patch from 2005A SP01 you are using now...
BTW: I have checked the statement on SAP Service Marketplace - and maybe this can be clarified even better too.
Thanks for raising this question!
Regards,
Frank
Message was edited by:
Frank Moebius

XL Reporter Runtime error - upgraded from SBO 2005A to SBO 2007A

Hi Experts,
We upgraded our client SBO 2005A to SBO 2007A. We have this issue with XL Reporter that everytime we go to Advanced Report Builder-> Cell -> Transaction Row -> Attribute ->ARP_Series we are getting IXSelectionBarctl error window that says Run-time error '0', and the only option you have is OK. After pressing OK, it returns another IXSelectionBarctl window error:
Run-time error '-2147418105 (80010007)'
Automation error
the callee (server (not server application) is not available and disappeared; all connection are invalid. The call may have executed.
After pressing OK button the Advanced Report Builder is still visible but no longer accessible.
Here is the command under Attribute I'm trying to access.
"FIG( SO_DocDate = @d1:@d2 And ARP_Series = "1" ) ARDT( Code = "Invoice" )"
Also, this report does not display the item quantity recorded in the invoice. It returns no data when running the report.
I think the problem is that the ARP_Series is no longer available in 2007A, if not where do I find the series or somewhat similar to ARP Series function?
Any help will be greatly appreciated.
Thank you!

Please check this thread:
Unable to connect XL Reporter in 2007 B
Thanks,
Gordon

Impossible to upgrade SBO 2004A (any PLs) to 2005A latest PL ???

Dear experts/gurus,
based on this thread:
/thread/491907 [original link is broken]
seems that impossible to upgrade SBO company database except server database from SQL 2000 to SQL 2005. Isn't it funny ? The other method is by creating new database, and importing all begining balances...Does the customer have to upload database again to SAP support ? finally, SAP B1 becomes one of cost center item in the company.
Rgds,

You are correct and it based on upgrading manual file.
The mystery to me is actually whether the new version contains different fields with old versions and how GUI / DI of SBO upgrade the old version company database's field if there are new fields in SBO 2005A SP 00 PL 01 but unavailable in SBO 2004A SP 00 PL 01. If we said there are query testing before upgrading and the result retrieved from query send to SAP support, it still unable to help. I am not so sure if upgrading company database is win-win solutions but the best is creating new company database and migrating all data from old version of company database. The problem of this option is that customer will refuse this option since it will take some mandays to do that, meanwhile 17% of total SBO installation has been paid for maintenance.
SAP AG must concern about this.
Rgds,

Upgrade for SBO 2005A SP1 PL 43 to SBO 2007A.

Hi All
I would like some assistance with the procedure to upgrade from SBO 2005A SP1 to SBO 2007A.
Which patch level must I use or I can just go straight to 2007A SP1 patch level 5 from SBO 2005 SP1 PL43?
Thanks
Bongani Dlamini

You may check this thread to get more info regarding the upgrade:
Upgrade to 2007A SP01 PL05 HF2
Actually this question belongs to System Administration forum. Please post the similar question there and close this one.
Thanks,
Gordon

Duration of upgrading SBO version

Dear Experts,
I am currently considering to upgrade SBO version, from 2004A SP00 PL 41 using SQL server 2000 to 2005A SP01 PL23 using SQL server 2005. I have done cleaning of 2004A version from add/remove program and installing SBO 2005A. Then I restore the 2004A database to SQL server 2005A. I run the SBO GUI/client then the system asks to upgrade version. I click OK and upgrade was started. However it seems never finish because I start to upgrade on 13.46 pm but until now 15.19 pm still not end/finish. there is no error message appears. The database file total is about 5GB. How many hour is the duration of upgrading? was I wrong in the upgrading process ? I appreciate your answer. TIA
Rgds,

Hi Ad,
Tks for your answer. I have succeeded to upgrade 1/2 hours after i post the message. I am confident now about his after you answered. I thought it will not success. However do you think my upgrading process is correct ?
Rgds,

Import Setting in SBO 2005A

Hi all,
I used SBO 2005A SP1 PL 43. I intend to import setting, e.g I have one company (A) and will create a new company (B). How to import setting company (A) ---> only setting but not database A -- into B? So company B has the same as setting configuration company A.
Please anybody can help me....?
Regards,
Agung

Hi Gordon,
I just want to import setting configuation e.g authorization, document setting, and etc about all settings. Not database because a new company has a different database.
Regards,
Agung

Add-On in SBO 2005A can work in SBO 2005B?

Hi all,
I developed an add-on solution using UIAPI & DIAPI 2005 which tested in SBO 2005A. Is it possible to work in 2005B as well.
Thanks in advanced.
Platform: Windows XP, SBO 2005A, VB.Net 2005

Hi,
from my experience i can say it works. anyway, i recommend you to recompile it on a development environment with 2005B - to be on the safe side.
there's another point you should be aware of:
in 2005 B you have some fields in system forms - for example in documents - which you don't have in 2005 A.
regards
David

SBO 2005A + MSSQL 2005 B2

Hi,
Has anyone tried using new MS SQL 2005 server as database server for SBO 2005A ??
Installing SBO server and creating the common database went OK, but when trying to create a new company SBO reports an SQL ODBC error = Invalid keyword near 'Revert'
Kr.
Soren

Soren,
As far as I know there's no final version of MS SQL 2005 in the market till now. As soon as it's out, we will officially publish (rather in a note or in the setup guide, or in both) that we are supporting it.
Best regards,
Felipe

How to upgrade SBO 2005 database to SBO 8.8 ?

Hi Expert,
Can anybody guide me on how to upgrade SBO 2005 database to SBO 8.8 ?
BR
Samir Gandhi

Hi JimM,
Many thanks for the solution.
Kindly confirm my understanding (as below) on your suggested solution.
1.I have to restore the company database backup ofver 2005 to SQL server.
2.I have to run the upgrade for Patch Level 15, while selection I will be shown the 2005 ver. dompany DB and I have to select it for upgrade, the SAP PL 15 upgrade utility will bring that company to PL 15 level.
Right ?
Once again many thaks for taking interest and providing solution to this thread.
BR
Samir Gandhi

This entry already exist in the following table " (ACPR) in SBO 2005A

Hi All,
I use training database of SBO 2005A SP 01 PL 39.
When updating new business partner (BP), the error message appears from system is this entry already exist in the following table " (ACPR) [ODBC 2035] (message 131-138).
This error is happened after I finished define the contact person. If I skip contact person, BP could be updated. I do creating business partner manually.
When I delete the ACPR entry, it could work well. I use query : delete from acpr where cardcode between 'xx' and 'yy'.
How to resolve the problem without deleting the entry ? does the table has maximum entry in the ACPR ? Thanks in advance
Rgd
John

Hi John,
Here are the details of note number 991296.
I hope it helps.
Adrian
Symptom
In certain cases, when trying to update a business partner master data the following error message appears: "This entry already exists in the following table (ACPR)".
This problem occurs because of old data in the history table ACPR (Contact Persons - History) that conflicts with current data in OCPR table (Contact Persons).
Other terms
Update, BP Master Data, History, ACPR, OCPR, "This entry already exists in the following table (ACPR)".
Reason and Prerequisites
Application error.
Solution
In order to confirm whether the above issue affects your DB, please run the following queries:
SELECT T0.CntctCode, T1.Name, T0.CardCode AS 'History Card Code', T1.CardCode AS 'Current Card Code' FROM ACPR T0 INNER JOIN OCPR T1 ON T0.CntctCode = T1.CntctCode AND T0.CardCode <> T1.CardCode
If the query retrieves any results, please contact your Support Center.

Changing the line vat amount on an invoice using the di api SBO 2005a

Hi
I am using SBO 2005a SP01 PL36.
I have written some code to import sales invoices which works fine apart from the fact I want to overwrite the line vat amount -
oinv.Lines.NetTaxAmount = vatam
SAP seems to ignore this and just calculate it anyway, it's like it's a read only field
Can anyone help me please ?
Thanks
Regards Andy

Paul,
you are true,
NetTaxAmount is readonly field. If you want to modify this field, you should work with lines.
Petr

Distinguishing SBO 2005A with B and C

Dear Experts/Gurus,
I have a problem to look for the differences among SBO 2005A, B and C. Based on what they are differentiated like that. Is it caused by localization, business process or modules ? I appreciate your answers. TIA
Rgds,

Hi Steve,
A/B/C are about localization. Every cluster release (A/B/C) covers a certain number of countries incl. their local legal issues. The business processes and the corresponding functionality is only affected when this relates to legal requirements of a certain country, e.g. tax handling.
Please note that with the release of B1 2007 A SAP already merged the A and C versions, so that there will be no C versions any more.
Best, Winald

Can SBO 2005A SP 01 use Japanese Language?

One of our client is asking if SBO 2005A SP 01 use Japanese Language? I have read on the documentation that SBO 2005A was release on a specified country which does not include Japan.
Thanks.

It seems for me from development roadmap about this quote:
Development Roadmap 2006-2007 pdf file:
A Cluster
Delivered countries: Australia, Austria, Belgium, Canada, Chile, Costa Rica, Cyprus (based on UK version; available as of Release 2005 A SP1) Denmark, Finland, France, Germany, Guatemala, Irish Republic, Israel, Italy, Mexico, Netherlands, New Zealand, Norway, Panama, Portugal, Puerto Rico, South Africa, Spain, Sweden, Switzerland, UK, USA.
Starting with SAP Business One 2007 A, all countries belonging to the C cluster (Czech Republic, Hungary, Poland, Russia, Slovakia) will be integrated into the A cluster.
In the future ( I think it will be a planning):
All countries belonging to B Cluster
China, Hong Kong (based on Chinese Version), Japan, Singapore, South Korea, India, Brazil will be integrated to A cluster.
Rgds,

Upgrade SBO 2005A PL 44

Similar Messages

Maybe you are looking for