Upgrade screen and memory

1. Hi. I just purchased a macbook pro 15 inch from amazon (2.2Ghz quad-core, 4GB memory and so on).
The screen is just normal resolution 1440*900.. I really want to upgrade this screen to 1680*1050 because I am going to do lots of work on images and videos.
The problem is I buy this macbook pro from the apple retailer on amazon. When I asked the apple custom service, they told me I cannot get my macbook pro screen upgraded. The only thing I can do is returning this pro to amazon and order another one from apple.
Do you have any idea that I can get my screen upgraded to high resolution screen?
Can I go to the local apple store and tell them that I want to upgrade the screen and I can pay extra money? In that case, how much do i need to pay?
2. I also want to upgrade the memory from 4GB to 8GB. I can do it myself. But as far as i know, for dell, if you open the body and upgrade the machine yourself, you are not going to be guaranteed any more because you have already broken the tag, which stands for no human damege, they put inside the body..
Do you know what should be the truth?
Thank you very much for your help.

Head over to the MacBook Pro forum please.
http://www.apple.com/support/macbookpro
OWC has good ideas, Mac oriented (MacSales for over 12 years) for upgrade parts like RAM, HDD, SSD etc
http://www.macsales.com/memory

Similar Messages

Upgrade HDD and Memory

Hello
I recently bought an mac air 2012 and want to upgrade the internal memory HDD and simms ( from 4 to 8 gigs) is it possible and also worth it.

If you already bought it, then the RAM can't be upgraded. It can only be configured at time of purchase. The Memory is integral with the motherboard, and there are no expansion slots.
Aftermarket SSD's are available, but it is something you may want to wait upon until after the warranty expires.
Your alternatives? Sell your underconfigured device, and buy one that is configured the way you want it.

Upgrade chip and memory

Can I upgrade the chip and memory? if so what can I use. The system is a little too slow. Yes I have all the software to speed it up. Thanks
HP 2000 Notebook PC Windows 8.1 64-bit [Edited for Personal Information] AMD E-300 APU with Radeon(tm) HD Graphics microprocessor 4GB SODIMM Kinston 800MHz memory 188B KBC Version 69.18 system board F.37 system bios HGST HTS545032A7E380 SATA Disk Device Product number: E0M17UA#ABA AMD E-300 APU with Radeon(tm) HD Graphics

Here is the Service Manual:
http://h10032.www1.hp.com/ctg/Manual/c03763129.pdf
Go through Page 16-17. Each different processor is soldered to the board, so you've to replace the whole motherboard for that, you can see that their part numbers are different according to three different boards.
I suggest RAM upgrade from 4 to 8GB by adding another 4GB in the other vacant slot, with configuration DDR3 1333MHz dual channel boost.
thanks,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Hard drive on HP notebook PC failed. After replacement, can I upgrade OS and memory?

I have an HP Pavilion Entertainment Notebook PC, Model dv9617nr (HP pn GS730UA). An error message on boot-up says "Operating System not found" so my Windows Vista Ultimate 32-bit (upgraded two years ago) will not load. I am assuming this means that my hard drive has failed. How can I verify this assumption? Again, assume I am correct, and I order the recommended replacement (HP pn 590736-001) from SpareParts Warehouse ($142.50 plus shipping). Are there instructions on the internet for doing this replacement? After I do this replacement, I thought I could install Windows 7 I already have and upgrade the memory to 4GB SODIMM from the 1GB SODIMM that was originally used. What problems would I have with Hardware Compatibility using Windows 7? If the memory module I use has the same specs as the HP recommended replacement (HP pn 598861-001), i.e. 800MHz, 200 pin, PC2-6400, SDRAM, but a larger 4GB memory capacity, would I have any compatibility problems using it? Please advise me on these issues. Thanks, Jeff
This question was solved.
View Solution.

Hi, Jeff:
Let me break down your question...
First, to confirm your HDD died, go into your BIOS menu. There should be a hard drive and memory diagnostics utility. Run the HDD diagnostics utility and see what it reports. More than likely the HDD has crashed and is no longer usable.
You can order a replacement drive or you can get any SATA II hard drive --either 5400 RPM or 7200 RPM.
You could go to 250 to 500 GB if you choose. Unfortunately right now, HDD prices are unreasonably high due to the flooding in Thailand where many HDD manufacturing plants are located. Some were damaged heavily, causing HDD prices to triple almost overnight.
This is a drive you can get that I think is better than what you have now: This one is 7,200 RPM. Faster but uses more battery power.
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136279
You can get the 5400 rpm version too...similar. Not as good as the caviar black. This is more along the line of what you would get from HP.
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136387
Read the reviews on both or you are free to get the one from HP.
There are instructions to install the hard drive and memory on your notebook's support and driver page. Click on Manuals on the right side of the page.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01278446&tmp_task=prodinfoCategory&cc=us&dlc=en...
Then you want to look at the maintenance and service guide.
You can upgrade the memory to a maximum of 4 GB using 2 x 2GB of PC2-6400 memory. You can get it from HP or you can get it at the link below. This is the memory I use. As a matter of fact I just ordered this very same memory to install in my sister-in-law's dv6700.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820148159
Now, you can install W7 just fine. I installed W7 Home Premium 64 bit on my dv6810us that has pretty much the same hardware as yours and 4 GB of memory (the same as I posted above).
Here is the catch though. It depends on what version of W7 you have. If you have a W7 upgrade version, you must install a qualifying operating system on the hard drive before you can upgrade it.
If you have a full version of Windows 7, then you can install it on a blank hard drive.
If you have the upgrade version, contact HP support and order a set of Vista recovery disks. Install Vista and then uprade to W7 if you have the upgrade version of W7.
You can use the vista drivers from your notebook's support page for any drivers you need that W7 didn't supply.
One thing...DO NOT flash (update) the BIOS when running Windows 7. You can only flash it using windows vista.
Hope this helps. If you have any other questions, please let us know.
Paul

Newbie Question! Upgrading Ram and Memory in Macbook Pro 2.2 Ghz

Hi!
I am a new Mac user. I started out as an apple user with my iphone 3 years ago and have recently went to Macbook and will never go back to PC. Anyway,
I need to upgrade my RAM from 2 to 4 GB.
1. What is the best or better RAM to use? Crucial?
2. Please advise on steps to do so.
Also, I need to upgrade my hard drive memory as I have 150 GB used and only 9 GB free per Istat.
1. Am I able to upgrade the memory for this?
Thank You any and all!!

Is this the right hard drive? Decent hard drive?
Samsung
750GB Spinpoint M8 Hard Drive
2.5-Inch | SATA 3.0Gb/s | 5400RPM | 8MB Cache

HP xw8600 workstation fans run at max all the time after upgrading CPUs and memory

Hello, This is my 1st post on the forums here so I would like to thank everyone for the help ahead of time. I have an HP xw8600 workstation on which I have upgraded the CPUs and RAM recently - after the upgrade the fans seem to spin at full speed all the time (not just under load). Before the upgrading the fans were barely heard but afterwords the workstation has become very loud. This seems odd that the fans always run fast now and seems like this is not "normal" - what needs to be done to allow the fans to again be modulated by load/temp settings as designed? I looked in the temp and fan RPM settings in the BIOS and it looks like all sensors are working (including ambient temp sensor - was stating around 20 deg. C). Hardware changes:Before - CPU: 2x Intel Xeon X5460/ 3.16 GHz, 12MB L2, 1333 MHz, FSB,120WRAM: HP 32GB (16x2GB) DDR2-667 ECC FBD RAM - using RAM riser After -CPU: 2x Intel Xeon X5492/ 3.40 GHz, 12MB L2, 1600 MHz, FSB,150WRAM: HP 32GB (8x4GB) DDR2-800 ECC FBD RAM - using RAM riser NOTE: From the HP spec sheet it says that 32GB(8x4GB) is not supported by 5492... I am not sure why this is so and do not know if this has anything to do with my fans running very fast. HP 32GB(8x4GB)DDR2-800 ECC FBD RAM RISER Supported ONLY w/dual processors
5272, 5472, 5482 HP 64GB (16x4GB) DDR2-800 ECC FBD RAM Supported ONLY w/dual processors
5272, 5472, 5482 and 5492.
Acoustics waiver required. Other than the constantly loud fans the workstation works perfectly with the new setup. Please let me know if anyone has run into this issue with the fast fans and whether there is a fix for this (maybe flashing BIOS?). Any advice is greatly appreciated! [I originally posted this under Desktops section - http://h30434.www3.hp.com/t5/Desktop-Hardware/HP-xw8600-workstation-fans-run-at-max-all-the-time-after/td-p/3929746]

The xw8600 has a motherboard firmware setting that if it detects high powered processors in place it wants to see the "double tall" performance heatsink/double fans per heatsink in place. I have posted about that and how I rewired a double tall to use side by side in my xw8400 next to a single tall heatsink/fan to see how cooling was affected in that workstation. The xw8400 did not ever come with double tall performance heatsinks, to my knowledge, so its motherboard's firmware is different. In those posts I also explained how to do a simple jumper wire modification on a single tall heatsink to spoof the xw8600 into thinking it had a double tall/two fans in place over each processor. Simple and quick. So, you might want to get a couple of double talls off eBay, or try the jumper wire trick. I'd personally advise to get the double tall heatsinks given that you're running 150W max TDP processors. If I remember correctly HP wanted you to use the double talls for 120W max TDP and above. I'd feel comfortable using that trick on a set of 120 watt processors if I was not hammering them frequently, but it sounds like you're a high level power user. The all-fans-on-high can be due to a failed thermisitor in the front power cable reading ambient air temps too high, but you can check that in BIOS to see the temp and it sounds like yours is not elevated incorrectly. You can search for my experience with that in a xw6600, and it is an easy $8.00-$12.00 fix with a new cable off eBay. You'd want the longer version for the xw8600, versus the shorter one for the xw6600. Finally, maybe you've just gone too high in your total wattage use? Those risers can run hot and draw lots of power. Could you live with less ram and get rid of the risers using 4GB sticks? Sometimes those prior prohibitions regarding what is and is not supported go away with later BIOS updates. Is your BIOS the latest? Welcome, and let us know what turns out to be the problem so others can benefit too. Scott

Upgraded ipod touch to ios 6 now only have blue screen and wont connect to computer

I upgraded my Ipod touch to the ios 6 now only have blue screen and wont connect but will charge. Have reset Ipod but just goes to blue screen on start up. is there any fix? 4th gen ipod.

Try a manual install (if iTunes will detect unit in DFU mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

HDD and memory upgrade on Satellite A350

Hi All
I have a satellite a350 laptop can anyone tell me whats the biggest harddrive I can have and memory please
Thanks

Hi
The RAM upgrade depends on the available chipset.
Not quite sure about your A350-xxx model but many of the Sat A350 notebooks were quipped with an Intel GM45 Express chipset and in such case you could upgrade the memory max up to 8GB RAM
Regarding the HDD: This notebook supports SATA HDD. This mean that you are not limited to an special size.
Theoretically it could be possible to use 500GB, 750GB 2.5 SATA HDDs

I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

I just tried the link and it is just fine. If the GateKeeper pops up then open Security & Privacy preferences, click on the General tab, set the last radio button to Anywhere.

TS1368 HELP!!! After upgrading to IOS 6.13 my IPAD Stucks in a plug-in screen and the Itunes. When i Try to connect to iTUNES pop-up message apear "iTunes has detected an iPad in recovery mode.. You must restore this iPad before it can be used with iTunes

I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!

Turn off your firewall and antivirus software.

Xorg / catalyst / kernel upgrade - Frozen screen and input [SOLVED]

I knew it, never upgrade xorg/graphic drivers when using ATI cards, just bless your god when it works and never touch it again. But I got tempted and I did a full system upgrade, and now... my xorg is broken.
I'm using ATI proprietary drivers catalyst 8.12-1 with xorg 1.5.3-3. My card is an ATI x1950 pro.
It used to work perfectly, but since the update, when i startx I just get a terminal (because of my .xinitrc) in fullscreen without my window manager getting launched, and my mouse in the middle of the screen; and nothing responds the mouse won't move, even ctrl+alt+backspace won't work. I have to ssh on my machine and 'killall X'.
I tried starting off with a default config (using aticonfig --initial -f), but still the same problem.
I have a dual screen setup.
I disabled AIGLX and Composite, but no success.
If I fail to repair this, since I made a backup of my pacman database, I could revert it right ?
Please help us, us pwned ATI users !
Here is the /var/log/Xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux fatale 2.6.27-ARCH #1 SMP PREEMPT Mon Dec 8 22:01:01 UTC 2008 i686
Build Date: 05 December 2008 09:10:55PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 13 03:36:24 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "ScreenSamsung" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "Xinerama" "true"
(**) Option "AIGLX" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) Xinerama: enabled
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling PS/2 Mouse
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc RV570 [Radeon X1950 Pro] rev 0, Mem @ 0xe0000000/0, 0xf5000000/0, I/O @ 0x00008000/0, BIOS @ 0x????????/131072
(--) PCI: (0@1:0:1) ATI Technologies Inc RV570 [Radeon X1950 Pro] (secondary) rev 0, Mem @ 0xf5010000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(--) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.56.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.561
(II) ATI Proprietary Linux Driver Build Date: Dec 1 2008 14:55:43
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x7280) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x9377518
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "dri" "true"
(**) fglrx(0): Option "KernelModuleParm" "agplock=0"
(**) fglrx(0): Option "RingSize" "8"
(**) fglrx(0): Option "EnableDepthMoves" "yes"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
ABI class: X.Org Server Extension, version 1.1
(--) fglrx(0): Chipset: "Radeon X1950 Series" (Chipset = 0x7280)
(--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x0762)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xf5000000
(--) fglrx(0): I/O port at 0x00008000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "on"
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.13
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV570
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000090, disabled=0x00000000
(II) fglrx(0): Connected Display1: CRT on secondary DAC [crt2]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: NUL Model: 1 Serial#: 1
(II) fglrx(0): Year: 2001 Week: 1
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max Image Size [cm]: horiz.: 31 vert.: 23
(II) fglrx(0): Gamma: 1.00
(II) fglrx(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.597 redY: 0.343 greenX: 0.316 greenY: 0.566
(II) fglrx(0): blueX: 0.153 blueY: 0.131 whiteX: 0.310 whiteY: 0.328
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 65.0 MHz Image Size: 304 x 228 mm
(II) fglrx(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1184 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) fglrx(0):
(II) fglrx(0):
(II) fglrx(0): Monitor name:
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff003aac010001000000
(II) fglrx(0): 010b0103081f1700caf0649857519127
(II) fglrx(0): 214f54afce0001010101010101010101
(II) fglrx(0): 010101010101641900a0400026301888
(II) fglrx(0): 360030e410000018000000fe000a2020
(II) fglrx(0): 20202020202020202020000000fe000a
(II) fglrx(0): 202020202020202020202020000000fc
(II) fglrx(0): 000a202020202020202020202020000e
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Connected Display2: DFP on secondary TMDS [tmds2i]
(II) fglrx(0): Display2 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM Model: 1e5 Serial#: 1212821817
(II) fglrx(0): Year: 2006 Week: 7
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
(II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: HMEL205539
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004c2de50139314a48
(II) fglrx(0): 0710010380261e782ade95a3544c9926
(II) fglrx(0): 0f5054bfef8081808140714f01010101
(II) fglrx(0): 010101010101302a009851002a403070
(II) fglrx(0): 1300782d1100001e000000fd00384c1e
(II) fglrx(0): 510e000a202020202020000000fc0053
(II) fglrx(0): 796e634d61737465720a2020000000ff
(II) fglrx(0): 00484d454c3230353533390a20200056
(II) fglrx(0): End of Display2 EDID data --------------------
(WW) fglrx(0): More than one displays are connected,so clone mode is enabled
(II) fglrx(0): Primary Controller - DFP on secondary TMDS
(II) fglrx(0): Secondary Controller - CRT on secondary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 574/682MHz @ 0Hz [enable load balancing]
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 24 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024_mine": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024_mine"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) fglrx(0): Default mode "1280x1024_mine": 109.6 MHz (scaled from 0.0 MHz), 63.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024_mine"x60.0 109.62 1280 1336 1472 1720 1024 1024 1026 1062 +vsync (63.7 kHz)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) fglrx(0): *Mode "1280x1024": 109.6 MHz (scaled from 0.0 MHz), 63.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 109.62 1280 1336 1472 1720 1024 1024 1026 1062 +vsync (63.7 kHz)
(**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x720"x50.0 60.46 1280 1328 1456 1632 720 721 724 741 +hsync (37.0 kHz)
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
[.. Millions of ModeLine's..]
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): Ring buffer size: 8 MB
(**) fglrx(0): KernelModuleParm: "agplock=0"
(II) fglrx(0): [pcie] 262144 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(II) fglrx(0): detected X.org 7.4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x4d000
(II) fglrx(0): [drm] mapped SAREA 0x4d000 to 0xb7af0000
(II) fglrx(0): [drm] framebuffer handle = 0x4e000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.56.4
(II) fglrx(0): Date: Dec 1 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.27-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x0004f000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3280)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2256
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 80
(II) fglrx(0): GLESX is enabled
(**) fglrx(0): Option "XaaNoOffscreenPixmaps" "true"
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
32 128x128 slots
14 256x256 slots
5 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(WW) fglrx(0): Option "AccelMethod" is not used
(WW) fglrx(0): Option "AccelDFS" is not used
(WW) fglrx(0): Option "GARTSize" is not used
(WW) fglrx(0): Option "BufferSize" is not used
(WW) fglrx(0): Option "UseFBDev" is not used
(WW) fglrx(0): Option "ColorTiling" is not used
(WW) fglrx(0): Option "RenderAccel" is not used
(WW) fglrx(0): Option "SubPixelOrder" is not used
(WW) fglrx(0): Option "DynamicClocks" is not used
(WW) fglrx(0): Option "PCI:1:0:0" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: drmOpenMinor returns 14
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Shutdown CMMQS
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x4d000 at 0xb7af0000
Thanks :)
edit: weird thing (or not) but DPMS (or whatever it is, the thing that turns off my monitor after some time) seems to work, altough moving the mouse or pressing the keyboard doesn't wake up the screen. Has this something to do with my mouse and keyboard not being recognized by xorg ?
edit2: omg yes it is ! I added:
urxvtc -e 'screen'
so when I startx an un-window-managered fullscreen terminal launches with a screen session, and if I ssh on it I can type in this terminal from another computer, and the screen actually displays what I'm typing, so that's definitely an input problem !
Final Edit: Well all solved, concerning the "frozen" stuff, it was just that my keyboard and mouse weren't detected because of the new hotpulg thingy (check http://wiki.archlinux.org/index.php/Xor … otplugging for more info, or just add 'hal' to your rc.conf), then restored my original xorg.conf, rebooted and it all went back to normal (: ). Hope this helps.
Last edited by arsenist (2008-12-13 03:28:42)

Has this something to do with my mouse and keyboard not being recognized by xorg
Hmm, I wonder what it would reveal if someone read the news? http://www.archlinux.org/news/424/
Even your Xorg.0.log is telling you the problem.
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling PS/2 Mouse
Last edited by jacko (2008-12-13 03:28:40)

Hard Drive and memory upgrade on macbook pro (13" mid 2009)

I want to upgrade my current hard drive and memory (currently 250gb and 4 gb) but i'm having trouble to find out which one is going to fit.
I considered buying this ones
http://www.bestbuy.com/site/Western+Digital+-+Scorpio+Blue+1TB+Internal+Serial+A TA+Hard+Drive+for+Laptops/9960668.p?skuId=9960668&productCategoryId=pcmcat189600 050008&id=1218253425468
http://www.bestbuy.com/site/Kingston+Technology+-+4GB+PC3-8500+DDR3+SoDIMM+Lapto p+Memory/2129381.p?skuId=2129381&productCategoryId=abcat0506002&id=1218404812331
Any ideas?

OWC is a reputable supplier of hard drives and RAM upgrades to the Mac community.
Go to their site, lookup your model MacBook Pro and see what upgrades are available.
The 1tb WD Scorpio Blue is a 5400rpm drive and slower than the crop of 7200rpm drives.
Do you need space over speed?

13" MacBook Pro (mid 2009) hard drive and memory upgrade

So I'm looking to upgrade my hard drive and memory for my 13" MacBook Pro. I'm still wondering just how easy it will be to recover my data, and put it back onto my new drive. I currently have everything backed up to an External drive using Time Machine. If I back it up, and then do the replacement, is it really as simple as it sounds to start it up, put in the Mac OS disk and then restore from a Time Machine backup? I have 150 Gb worth of data and would be ticked off if I can't get it back to my MacBook Pro. Any expertise out there? The actual installation looks easy, but it's the loading the new drive that has me concerned. When I install the new drive, is there anything else I need to do to prep it? And how do I do it if there is? Looking at a 500 gb or even 1 Tb Western Digital drive.

I would say get yourself an external enclosure. Put the hard drive that comes out of your MacBook pro into the enclosure. Put in the new hard drive. Boot up from the external hard drive, use disk utility to format the new drive. Use Carbon Copy Cloner to move everything as it is from old hard drive to new internal one. Re-boot to internal drive, you are done.
Carbon Copy Cloner is a freeware get it from download.com

I upgraded new software onto my iphone 4 however it stopped syncing and said error so when i tried to access my phone the itunes USB was showing in my phone screen and now i cannot access my phone

i upgraded new software onto my iphone 4 however it stopped syncing and said error so when i tried to access my phone the itunes USB was showing in my phone screen and now i cannot access my phone

When it stopped and said error, what was the error? You are saying that you disconnected the phone from the computer and all you see is the USB showing on the phone? Then you need to reconnect to the computer and restore the phone.

HT3775 I just upgraded my ipad to 6.0. I can no longer expand my audio files so that I can move forwards and backwards. I used to get a diagonal arrow to enlarge the screen and then have a bar that I can move to navigate. Can you help?

I just upgraded my ipad to 6.0. I can no longer expand my audio files so that I can move forwards and backwards. I used to get a diagonal arrow to enlarge the screen and then have a bar that I can move to navigate. Can you help?

Hi James,
I am listening to embedded training files on the Quick Time player (I think). They cannot be copied to protect the information. You only have the option of listening. I used to be able to click on the Q in the audio strip and it would provide a diagonal arrow and this would allow me to expand the bar to a full screen. I then had the bar which would allow me to navigate in case I wanted to listen again or in case I wanted to move forward. After my upgrade, I can no longer expand the strip to a full screen with the adjuster. Now I have not chance to take a break in listening to these audios and most of them are at least an hour long. Thanks for your help.

Upgrade screen and memory

Similar Messages

Maybe you are looking for