Upgrade scripts for other platforms...

We are in a need for upgrade scripts (Portal 3.0) for other platforms like HP-UX, when will these be available?
Or can we use the scripts for the other Operating Systems, provided we invoke them from that O/S?
thanks
Tim
null

We'll be posting new versions of the upgrade scripts for HP-UX, IBM AIX, Linux and others shortly on OTN. (I don't have an ETA, but it won't be long, I think). Earlier versions of these upgrade scripts have also been posted to metalink.oracle.com.
Best Regards,
Harry

Similar Messages

URGENT: Where are the upgrade scripts for Tier1 ?

I found the upgrade scripts for 3.0.6/3.0.7 to 3.0.8 for Windows NT and Solaris here on Technet, but where are the upgrade scripts for the Tier 1 platforms ? I urgently need the ugrade script for Tru64. Please help.

Sorry for the confusion - the page should be updated very
shortly. In the meantime, you can download the 3.0.6/3.0.7/3.0.8
to 3.0.9 scripts for NT/2000 at:
http://download.oracle.com/otn/nt/portal/p1831355_309_WINNT.zip
and 3.0.6/3.0.7/3.0.8 to 3.0.9 scripts for UNIX at:
http://download.oracle.com/otn/solaris/portal/p1831348_309_UNIX.z
ip
Note that these are the same scripts that are accessible from
Metalink (NT/2000 - Patch:1831355) and (UNIX - Patch:1831348)

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

Upgrade script for 2.1.0.9.3?

did anybody try to upgrade a WebDB version
2.1.0.9.3 to Portal 3.0? The upgrade script
for WebDB2.2 to Portal30 fails due to the
version number. I do not know the differences
between WebDB 2.1.x and 2.2. If the changes
have not been too significant, is it possible
to modify the existing upgrade script
(WebDB2.2 -> Portal3.0) and still run it?
Thanks for any help or hint
Joerg

For all of those upgrading to Portal 3.0 from WebDB 2.x, you will first need to upgrade your existing WebDB installation to WebDB 2.2 first before doing the WebDB 2.2 to Portal 3.0.x upgrade. It is a requirement that your WebDB environment be at version 2.2 before upgrading to Portal 3.0.x.
null

I'm not able to upgrade my Mac to itunes 10.5. Keep getting message "Run pre upgrade script for apple mobile device support" any help please?

Hi I'm not able to upgrade my Mac OS X 10.5.8 to itunes 10.5 Keep getting message "the following install failed. run pre upgrade script for apple mobile device support" contact software manufacture for assistance. any help please?

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

WV210 Error message "video for other platform/os" Browser IE 11 accessing remotely "internet"

Hello,
I have a WV210 that I have setup with port forwarding on my router. I am able to access the video internally on my intranet through IE 11 with no issues, but when I try to access the video remotely from the Internet I get the Error " Video for other platform/os. On chrome I am able to get the video but I do not have the other options since it is an unsupported browser. I think the problem has something to do with the video codec being used over the Internet. Do you know of a setting i would need to change on IE 11 or an add-on. or how I can ensure the camera is using one video codec over the other.
I am also using a lenovo laptop on windows 8.1.
Thanks for your time.

Hi linksysgt, the WVC210 is now being handled by the Cisco Small Business Support Community.
https://supportforums.cisco.com/index.jspa
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

WVC210 V1.1.1 - worked fine but now 'Video for other Platform/OS'

I've had this camera for 2-3 years and no problem - now when I connect i get a black screen with the error 'Video for other Platform/OS' instead of a picture. Could this be an IE 11 problem? I've been running win7 - dont know when it upgraded from IE10 to IE11
Is version 1.1.1 the latest for this camera?
Thanks!

I have had the auto update box cleared and still when I opened IE today, 5-29-2014, instead of seeing my normal blank page I get some kind of one time welcome screen that I instantly navigated away from (control issues maybe).
To the point - Even after trying to slacken the IE active x settings and add the camera addresses to the compatibility view list (why is that not static ?!?) I get the video for other platform/os text on a grey screen. During my many attempts adding cameras to different internet zones and stuff, I did get a snap shot of the video to appear but no streaming video and some of the controls are missing.
The link to the solution has been edited and reflects that the user needed to revert back to IE 10.
So I'm looking for help so that I can continue to use my great WVC 210 cameras.
I'm using Windows 7 Ultimate by the way.
Any help would be greatly appreciated.

Dealing with "video for other Platform/OS" message

Some advice please.
On my home network, I have my WVC200 camera attached to the Linksys router via a cable; and I am able to control the camera and see video from a Vista OS machine. When I try to see video on a wireless laptop, the message "Video for other Platform/OS" appears on the Linksys control screen.
I am able to log in to the wireless camera from the laptop; pan/tilt the camera; but cannot see video on the laptop.
Should I be able to see video on a second PC on the network ?
I have set up the WVC200 camera with a fixed IP of 192.168.1.120.
I am using freedns.afraid.org DDNS using port forwarding to port 2000
Please help.
Thanks in advance
Jay
Webcam user

You may also check the Cisco Small Business community for Support regarding both Cameras.
https://supportforums.cisco.com/community/netpro/small-business
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that

I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that I have to upgrade using the account that I used to buy iPhoto. What do I have to do to upgrade iPhoto?

Dear Katty,
Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
https://discussions.apple.com/thread/3374419?start=0&tstart=0
https://discussions.apple.com/message/16628399#16628399
Do you have an idea of how can I solve this problem?
Thank you very much again.
Best regards,
Alfonso

Same apps free for other platforms but paid for Wi...

Recently purchased a Lumia 920, and quite satisfied so far. But I have observed that several apps/games which are free on other platforms like Android and iOS are actually not free for Windows Phone. For example, the entire Angry birds series is free for other platforms, but they're paid for Windows Phone. What is the reason behind this? And when Microsoft are trying hard to promote their Windows Phone OS, why are they so greedy that they charge for apps/games which are totally free on other platforms?

Contact the developer or MS on that one.Some games and apps would of been free for a time or there is opportunity's when these go free for a certain period.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Mod_weblogic.c Apache DSO for other platforms

With release 5.1 of Weblogic Server, a DSO file was provided
for solaris/Apache to perform strong integration.
I was wondering if:
a)It was possible to get that DSO built for other platforms -- in our case
AIX
b)If licensed users of Weblogic Server could get the source code for that
module
so that they can build it in as required.
The reasoning for a is simple enough -- not everyone who uses Apache also
uses Solaris.
As for b, Apache's rapid release schedule means that security concerns are
dealt with very quickly,
and new releases may need to be installed. If the source code was
available, security concious web
masters would be able to rebuild their server quickly and not have to beg
and plead for an updated
build from Bea.
Integration with Apache and AIX is going to be a strong decision factor, as
we would prefer to keep the application server or server cluster only
indirectly connected to the outside world.
Failing that, does anyone have other solutions for connecting Apache to
Weblogic seemlessly?
--Colin Peart
Colin Peart <[email protected]> "The makers may make,
Rogers iMedia Developer And the users may use,
Core Development Team But the fixers must fix,
416-642-4892 With but minimal clues"
--Anon

Please see below.
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Colin Peart <[email protected]> wrote in message
news:8gmcc3$epg$[email protected]..
With release 5.1 of Weblogic Server, a DSO file was provided
for solaris/Apache to perform strong integration.
I was wondering if:
a)It was possible to get that DSO built for other platforms -- in our case
AIXWe do not plan to make the source code available. However, we do plan to
make ports of the Apache plug-in to other platforms. Please contact your
sales representative for more information.
Thanks,
Michael
b)If licensed users of Weblogic Server could get the source code for that
module
so that they can build it in as required.
The reasoning for a is simple enough -- not everyone who uses Apache also
uses Solaris.
As for b, Apache's rapid release schedule means that security concerns are
dealt with very quickly,
and new releases may need to be installed. If the source code was
available, security concious web
masters would be able to rebuild their server quickly and not have to beg
and plead for an updated
build from Bea.
Integration with Apache and AIX is going to be a strong decision factor,as
we would prefer to keep the application server or server cluster only
indirectly connected to the outside world.
Failing that, does anyone have other solutions for connecting Apache to
Weblogic seemlessly?
--Colin Peart
Colin Peart <[email protected]> "The makers may make,
Rogers iMedia Developer And the users may use,
Core Development Team But the fixers must fix,
416-642-4892 With but minimal clues"
--Anon
>
>

Oracle 10g XE for other platforms

Are there plans to make XE available for other platforms? Can I register a vote for Mac OSX?

Funnily enough Tom Kyte was asked this very question when he launched XE at the UKOUG Annual Conference. His response was that there were plans to extend XE to other platforms but he didn't know the time scales. He did vouchsafe that he had a shiny new G5 waiting for him when he got back, so I can guess he's +1 on your vote.
In practice, if you look at the target for XE - MySQL and MSSQL - Linux and Window
make more sense than launching on Solaris and Mac. But I don't think it will be too long before installs come out for other *nix platforms.
Cheers, APC

When will FaceTime be available for other Platforms?

When will FaceTime be available for other Platforms? Steve Jobs, the CEO of the company at the time, said Apple was working on making FaceTime an Open standard.
With already so many FaceTime enabled devices out there, and with so many financially strapped individuals relying on the cheaper android devices for both their phone and there Internet, opening up FaceTime to all other platforms will make facetime the default videoconference utility. I want to see this implemented for medical calls to nurses and providers in helping them to assess patients from a distance that are unable to travel. Visual/live communication would be a breakthrough.
This can already be implemented with patients who have a iOS devices, or trying to get them to download app that other devices can use....but it is not as seamless as FaceTime. When will this promis be fulfilled?

There are no other options for using FaceTime. GG was referring to other services with a similar functionality such as Skype. Again, none of us here knows what Apple has planned for FaceTime nor when, or indeed if, they will ever open up FaceTime to other developers.
Regards.

Enabling Motion Detection on 2621V: "Video for other platform/os" error

Team,
trying to get motion detection on my CIVS 2621V enabled. Running Firmware Version: V4.4.2-2
I always get the Video for Other Platforms error not matter which browser that I am using or different systems.
Searched around and found some posts from some COTS video surveillance systems from Cisco running into the same issue but nothing here.

It's likely you'll need a much older version of IE in order to set this up natively. I believe the original user guide for the 2621 actually called for IE 6 on Windows XP.
http://www.cisco.com/c/en/us/td/docs/security/physical_security/video_surveillance/ip_camera/2621/user_guide/2621ug.pdf
... although I seem to recall doing this with something as recent as IE 8 without issue.
I actually have to keep a VM and an old XP workstation with VNC on it to work with some of the much older hardware :-S

WVC80N - Remote - "Video for other Platform/OS"??

I finally was able to remotely access my WVC80N remotely. However from my work computer I can get into the Web setup window but when selecting the view video get the message in the WVC80N web window "Video for other Platform/OS"
My work computer is XP. Able to view remotely from home and other computers.
Please help.
Thank you,
Chuck

Sounds like you may be using a browser like Firefox and something is going on. First thing is try the snapshot video mode, to see if you can get a snapshot.
This URL would be http://yourname.Mylinksyscam.com:xxxx/img/snapshot.cgi
(where xxxx is the TCP port the cam is on)
Then, if that shows a static JPG image, you can then try firefox using the MJPG mode
http://yourname.Mylinksyscam.com:xxxx/img/mjpeg.htm
Most likely this will work, IE can't do MJPG mode, try another browser and eventually you'll get the video to pop up.
http://www.MyHomeServer.com
Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

Upgrade scripts for other platforms...

Similar Messages

Maybe you are looking for