Upgrade SCSM to SP1

Hello,
did any one upgrade SCSM 2012 RTM to SP1 with ITGRC Installed?
Any experience sharing is thanks-full.
Regards
Antoine AL Ibry

The Installation went smooth with no problem at all.
Antoine AL Ibry

Similar Messages

Error when trying to upgrade scsm dw 2012 sp1 to r2

Hello,
when I trying to install scsm 2012 r2 upgrade on my scsm dw server error appears.
does anyone faced and successfully resolved this problem?
regards,
Ilgar
Regards, Ilgar Khalilov.

This issue might happen if you have a space in the DW Management Group name.
Maybe this blog post from Anders Asp is helpful:
Strange error message when trying to upgrade SCSM 2012 Sp1 to SCSM 2012 R2
Andreas Baumgarten | H&D International Group

Upgrading scsm 2012 error

I am planning to upgrade my scsm 2010 to 2012 both Management and DW server.
So i have set up the secondary lab environment and do this.
The DW server has been upgraded successfully.
When i try to upgrade SCSM Management server, at the finalizing stage, i get this error as _MPProcessorDeferred.
What could be the reason?
regards Sundaresan.C

Now if i rerun the setup, i get a different error...
_RegisterExtensionsDeferred at the finazling stage.. Find below the log..
2014-08-26T14:48:28.7717429+05:30   Always:   Trace Session Started
02:48:28:
02:48:28:Application Started
02:48:28:This is 64-bit application.
02:48:28:Product ID is NOT installed
02:48:28:Found ProductID:{A193A8C7-CBE7-4F3B-887F-6B03EE43A208}, ProductName:Microsoft System Center Service Manager SP1, Version:7.0.6555.128
02:48:28:Found SMServer components
02:48:28:Found SMConsole components
02:48:28:Setup is running from: c:\SCSM2012\amd64\Setup
02:48:28:Using local Analysis server as default instance
02:48:28:Using 'DWASDataBase' as default Analysis server database name
02:48:28:Using 'Default' as default Analysis server database file path
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_license.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_EvalLicense.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\PrerequisiteInputFile.xml.
02:48:29:Found c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:48:29:All vital setup files found.
02:48:29:Upgrading Service Manager 7.0.6555 with 7.5.1561
02:48:29:Checking dependencies for Server upgrade...
02:48:40:Managment server is registered with Datawarehouse 'TESTSER'
02:48:42:Datawarehouse is up-to-date
02:48:42:Getting Management Group information from TESTSER:ServiceManagerNew
02:48:42:[GetManagementGroupPropertiesFromDB]: Opened the DB connection using Data Source=TESTSER;Initial Catalog=ServiceManagerNew;Integrated Security=True;Persist Security Info=False.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Management Group information.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Primary SDK server:..net.
02:48:42:Validating SmAdminRoleGroup
02:48:43:Checking MU OptIn state
02:48:43:MU is not opted in
02:48:43:Start adding DataItems
02:48:43:System Center Service Manager Install
02:48:44:Final Install Tasks
02:48:44:Done adding DataItems
02:48:46:Getting Domain List
02:49:35:LoadPrerequisites: Start adding ComponentTitles
02:49:35:LoadPrerequisites: Start adding DataItems
02:49:35:Memory check
02:49:36:Microsoft SQL Server 2008 Analysis Management Objects
02:49:36:Memory check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:IIS check
02:49:36:ASP.NET check
02:49:36:Basic Authentication check
02:49:36:Windows Authentication check
02:49:36:Microsoft .NET Framework 4 check
02:49:36:Windows Service Pack check
02:49:36:Microsoft Report Viewer Redistributable check
02:49:36:PowerShell 2.0 check
02:49:36:SharePoint Server 2010 check
02:49:36:SharePoint Farm Administrator check
02:49:36:SharePoint Server 2010 configuration check
02:49:36:ADO.NET Data Services Update check
02:49:36:Microsoft SQL Server 2008 Native Client check
02:49:36:Language Pack for SharePoint Server 2010 or SharePoint Foundation 2010 - English check
02:49:36:LoadPrerequisites: Done adding prerequisites checks
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Memory check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   MemoryCheck-8gbWarn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Memory check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Analysis Management Objects prereq.
02:49:36:Entered RequiredAMO
02:49:36:Trying alternate method of detection using Assembly.Load
02:49:36:CheckPrerequisites:        Logic Type:and   AMO-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Analysis Management Objects: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Processor speed check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorSpeedCheck2.5MHz-Warn: 0
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorCoreCheck2Core-Warn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Processor speed check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Windows Service Pack check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   Win2k8R2Sp1Check-Err: 0
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   Win2k8R2Sp1DCCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                The value 6.1.7601.65536 was not within the range 6.2.0 to 9.9.9999.
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextDCCheck-Err: 2
02:49:36:
02:49:36:CheckPrerequisites:    Windows Service Pack check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft Report Viewer Redistributable check prereq.
02:49:36:Entered RequiredReportViewer
02:49:36:CheckPrerequisites:        Logic Type:and   RptVwrCheck-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft Report Viewer Redistributable check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking PowerShell 2.0 check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   PowerShell2Check-err: 0
02:49:36:CheckPrerequisites:        Logic Type:or   PowerShell2Check32-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    PowerShell 2.0 check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking ADO.NET Data Services Update check prereq.
02:49:36:Loading System.Data.Services.Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
02:49:36:Found version 3.5.30729.5420
02:49:36:CheckPrerequisites:        Logic Type:and   ADODotNetDataServicesHotfix-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    ADO.NET Data Services Update check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Native Client check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   SQLNCLI10-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Native Client check: Passed
02:49:36:
02:49:36:**************************************************
02:49:37:CheckPrerequisites: Return Value 0
02:49:39:Doing Pre-Upgrade checks...
02:49:39:Validating database ServiceManagerNew on SQL Server TESTSER
02:49:39:Validating SQL Instance TESTSER
02:49:39:SQL Server: TESTSER
02:49:39:SQL Server version: 10.50.1600.1
02:49:39:Full text search installed: True
02:49:39:Checking if '\administrator' is Sysadmin Or (SecurityAdmin And DbCreator) on SQL Instance TESTSER
02:49:39:Stopping Service OMSDK on server
02:49:39:Starting Service OMSDK on server
02:49:41:Stopping Service OMCFG on server
02:49:44:Starting Service OMCFG on server
02:49:47:Validating Path C:\Program Files\Microsoft System Center\Service Manager 2010\
02:49:47:Checking for available free disck space
02:49:47:Checking directory write access
02:49:47:*** Pre-Upgrade checks passed ***
02:49:47:QuickFixEngineeringHandler: Unable to LoadQuickFixEngineeringFile.
02:49:47:SetProgressScreen: StartMinorStep.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:ProcessInstalls: Install Item System Center Service Manager Install has a Preprocessing delegate of SystemCenterServiceManagerPreinstallProcessor. Launching it now.
02:49:47:SetProgressScreen: Init MSI Install progress.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:LaunchMsi: Msi mutex is not in use.
02:49:47:LaunchMsi: MSI to launch is: c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMsi: Turning off the internal UI for c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMSI: Enable logging for the MSI at C:\Users\administrator.\AppData\Local\Temp\2\\SCSMInstall02.log.
02:49:47:LaunchMsi: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi is not in silent mode. Setting the external UI.
02:49:47:LaunchMsi: Launching c:\SCSM2012\amd64\Setup\Server\SM.msi
02:49:52:statusUpdate: Resetting progress bar for MSI: MaxValue 58857
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:09:Install Progress - (ProcessComponents) Updating component registration
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:10:Install Progress - (StopServices) Stopping services
02:50:16:Install Progress - (_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Stopping Health services
02:50:17:Install Progress - (RemoveODBC) Removing ODBC components
02:50:17:Install Progress - (RemoveFiles) Removing files
02:50:17:Install Progress - (CreateFolders) Creating folders
02:50:17:Install Progress - (InstallFiles) Copying new files
02:50:30:Install Progress - (_CreateDatabase) Creating Database
02:50:30:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:07:Install Progress - (ExecuteSqlStrings) Executing SQL Strings
02:52:07:Install Progress - (CreateShortcuts) Creating shortcuts
02:52:07:Install Progress - (WriteRegistryValues) Writing system registry values
02:52:08:Install Progress - (_InstallServerPerfCounters.D2179E31_E456_401A_A820_CEBB135E3429) Installing Server Performance Counters
02:52:12:Install Progress - (WriteEnvironmentStrings) Updating environment strings
02:52:12:Install Progress - (_Rollback_UninstallBIDMOF.68918168_3885_4F75_BBF8_0CC84213F8D1) Rolling back BID MOF Installation
02:52:23:Install Progress - (GenerateScript) Generating script operations for action:
02:52:24:Install Progress - (_MPProcessorDeferred) Importing Management Packs
02:52:25:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:26:Install Progress - (RegisterUser) Registering user
02:52:26:Install Progress - (RegisterProduct) Registering product
02:52:26:Install Progress - (PublishComponents) Publishing Qualified Components
02:52:26:Install Progress - (MsiPublishAssemblies) Publishing assembly information
02:52:26:Install Progress - (_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429) Configure Config Service
02:52:26:Install Progress - (_CreateInstanceQualityRelationship) Creating Default Instances, Qualities And There Relationships
02:52:26:Install Progress - (PublishFeatures) Publishing product features
02:52:26:Install Progress - (_StartNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Restarting Health Service
02:52:26:Install Progress - (PublishProduct) Publishing product information
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:32:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:An error occurred while executing a custom action:_RegisterExtensionsDeferred
Upgrade failed after making permanent changes to this management server. A disaster recovery procedure will be necessary to rebuild this machine before attempting upgrade again. Consult the User Guide to determine which action to take next.
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 3
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 10525
02:58:43:MsiInstallProduct finished for msi c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:58:43:LaunchMSI: Setting rollback to true
02:58:43:LaunchMSI: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi returned error 1603:Fatal error during installation
02:58:43:ProcessInstalls: Install Item System Center Service Manager Install failed to install. We did not launch the post process delegate.
02:58:43:SetProgressScreen: FinishMinorStep.
MSI (s) (F4:B4) [14:58:43:928]: Note: 1: 1708
MSI (s) (F4:B4) [14:58:43:928]: Product: Microsoft System Center 2012 - Service Manager -- Installation failed.
MSI (s) (F4:B4) [14:58:43:929]: Windows Installer installed the product. Product Name: Microsoft System Center 2012 - Service Manager. Product Version: 7.5.1561.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
1603.
MSI (s) (F4:B4) [14:58:43:942]: Deferring clean up of packages/files, if any exist
MSI (s) (F4:B4) [14:58:43:942]: MainEngineThread is returning 1603
MSI (s) (F4:A4) [14:58:43:945]: RESTART MANAGER: Session closed.
MSI (s) (F4:A4) [14:58:43:945]: No System Restore sequence number for this installation.
=== Logging stopped: 8/26/2014 14:58:43 ===
MSI (s) (F4:A4) [14:58:43:945]: User policy value 'DisableRollback' is 0
MSI (s) (F4:A4) [14:58:43:945]: Machine policy value 'DisableRollback' is 0
MSI (s) (F4:A4) [14:58:43:945]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (F4:A4) [14:58:43:946]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (F4:A4) [14:58:43:946]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (F4:A4) [14:58:43:946]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (F4:A4) [14:58:43:946]: Restoring environment variables
MSI (s) (F4:A4) [14:58:43:947]: Destroying RemoteAPI object.
MSI (s) (F4:88) [14:58:43:947]: Custom Action Manager thread ending.
MSI (c) (AC:20) [14:58:43:948]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (AC:20) [14:58:43:949]: MainEngineThread is returning 1603
MSI (c) (AC:EC) [14:58:43:952]: RESTART MANAGER: Session closed.
=== Verbose logging stopped: 8/26/2014 14:58:43 ===
regards Sundaresan.C

Options for monitoring health of SCSM 2012 SP1 using SCOM 2012 SP1

Hi,
I've done some research on how to monitor SCSM using SCOM (version 2012 SP1 for both) and found two options:
Option 1 - Agent-based monitoring. With SCSM2012 SP1, it looks as though the agent is
already present (for upgrades and also for fresh installs). So it follows that SCOM will be able to monitor the health of SCSM.
Option 2 - Agentless monitoring. On the Technet
download page, 'System Requirements' section indicates compatibility with SCOM 2012 and above, and SCSM 2012 and above. Details tab says the following (emphasis mine):
This System Center Management Pack for System Center 2012 - Service Manager should be used to monitor
System Center 2012 - Service Manager, System Center 2012 R2 - Service Manager
and includes monitors for the management server as well as the Data Warehouse server. In this release of the management pack, the Data Access Service, Health Service, Configuration Service, and workflows are monitored.
So it looks like both options are viable, but I'd be interested in hearing other people's experiences of using one vs. the other. Is there any major difference in the information that's provided by agentless vs. agent-based monitoring, or are they just two
different ways of pulling the exact same information into SCOM?
Edit: Just occurred to me that SP1 isn't explicitly mentioned in the Technet article linked above under option 2. Has anyone successfully used agentless monitoring on SP1?

Hi,
Here is a related blog for your reference.
SCSM 2012 SP1 (Beta) – Monitoring Management Servers with SCOM 2012
http://marcelzehner.ch/2012/09/29/scsm-2012-sp1-beta-monitoring-management-servers-with-scom-2012/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Reporting Tab is not showing in SCSM 2012 SP1 Console

I'm working with SCSM 2012 SP1. But after installing data ware house only "DataWareHouse" tab appares no "Reporting" tab. And it shows below MSG:
And only the below reporting management pack are available in the Data Ware House >> Management pack area.
I already check data warehouse server 'System Center Data Access Service' and 'SQL Server reporting Service', borth are running. But still 'Reporting' tab is not there.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

At last I solve the problem. THere is 2 solution for resolve the issue.
Force start all warehouse job.
Un register and reregistared DataWareHouse againg.
In my case I do the borth after reregister datawarehouse I wait 1hr after that I manualy start the warehouse jobs. And it works for me.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

Error while creating SCSM 2012 sp1 self-portal on SP2013

Hell to everyone
today dive into SCSM installation and self-service portal setup. the environment i use is as following:
Windows 2008 R2 Datacenter x64 SP1
SQL 2012 BI Edition
Sharepoint server 2013 Enterprise Edition
SCSM 2012 SP1
i have successfuly set up SCSM 2012. everything is workig fine.
but when i go to sel-service portal setup (all components on one server - both Web-Content server and SP WebParts) i face with an error
_CreateSharePointWebSite.F175D191_81C3_4A7D_A05B_6A250575B468
the error is related to Site creation and SP webparts installation.
i tried to setup just Web-Content Server and installation was finished successfully.
Please help me with the issue! very urgently
there is no honda without racing

Hi Pavel,
According to your description, my understanding is that you got an error when you set up Service Manager 2012 SP1 running on SharePoint 2013.
Please check whether you have configured SCSM and SharePoint 2013 correctly. You can check as the following link:
http://blogs.technet.com/b/thomase/archive/2013/08/19/how-to-get-service-manager-2012-self-service-portal-running-on-sharepoint-2013.aspx
Please make sure you used the same account to instal SharePoint and Service manager.
If this issue still exists, please do as the followings:
Open Central Administration\Monitoring\Review job defintions, select the servers in the farm one-by-one , then click Application Server Administration Service Timer Job, click Disable.
Restart "Sharepoint 2010 Timer " in services.msc on all servers in the farm.
Try to install the SCSM portal.
Click Central Administration\Monitoring\Review job defintions\Application Server Administration Service Timer Job, click Enable.
Restart "Sharepoint 2010 Timer " in services.msc on all servers in the farm
Here are some similar links for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/47d43d25-6e14-464a-b899-c13dcbad880f/error-while-installing-service-manager-selfservice-portal?forum=sharepointcustomizationprevious
http://scug.be/valerie/2011/12/01/scsm-2012-self-service-portal-setup-can-t-create-a-new-site/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Trying to Perform an install of SCSM 2012 SP1 - SQL Analysis Services Not Installed

I'm performing a clean install of System Center Service Manager 2012 on a Windows 2012 server. The prerequisite checker told me the Analysis Objects were not installed. I clicked the link and downloaded the SQL Server 2008 R2 Analysis
Management Objects. I restarted the install and it still says it's not installed. I also tried installing the 2012 version of the objects and still no luck.
I also tried installing both the x86 and x64 versions of these tools.
I have also tried the same install on a Windows 2008 R2 server and had the same error. I'm convinced this is a bug in the setup.
Has anyone else seen this? Is it a known issue?

Try to check the log file SCSMSetupWizardxy.log under C:\Users\<username>\AppData\Local\Temp
perhaps it could not load Microsoft.AnalysisServices.dll assembly.
12:23:55:**************************************************
12:23:55:CheckPrerequisites: Checking Microsoft SQL Server Analysis Management Objects prereq.
12:23:55:Entered RequiredAMO
12:24:08:Trying alternate method of detection using Assembly.Load
12:24:08:Error occured while loading Microsoft.AnalysisServices.dll: Could not load file or assembly 'Microsoft.AnalysisServices, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
12:24:08:CheckPrerequisites: Logic Type:and AMO-err: 2
12:24:08:
12:24:08:CheckPrerequisites: Microsoft SQL Server Analysis Management Objects: Failed
12:24:08:
12:24:08:**************************************************
can you confirm if that assembly exists in the Assembly folder.
on a side note: SCSM 2012 SP1 supports 2008 R2 SP1 or above, and double check that the account you are using to install the SM is a local admin.

How to generate Incident Report with incident description field? in SCSM 2012 sp1

Can incident description field be displayed in reports? in SCSM 2012 SP1
Regards
Shujjat
Metalsoft

ALTER PROCEDURE [dbo].[ServiceManager_Report_Incidents]
@Classification nvarchar(max) = '-1',@SupportGroup nvarchar(max) = '-1',@ID nvarchar(max) = null,@IncludeDeleted bit = 0,@LanguageCode nvarchar(max)= 'ENU'
AS
DECLARE @tableClassification TABLE (value nvarchar(256))
INSERT @tableClassification (value)
SELECT * FROM dbo.fn_CSVToTableInt(@Classification)
DECLARE @tableSupportGroup TABLE (value nvarchar(256))
INSERT @tableSupportGroup (value)
SELECT * FROM dbo.fn_CSVToTableInt(@SupportGroup)
DECLARE @tableID TABLE(value nvarchar(256))
INSERT @tableID (value)
Select * FROM dbo.fn_CSVToTableString(ISNULL(@ID, ''))
SELECT DISTINCT
I.Id,
I.Title,
Classification = ISNULL(ClassDS.DisplayName,ClassEnum.IncidentClassificationValue),
ClassEnum.IncidentClassificationId AS ClassificationId,
ClassEnum.ParentId,
Support = ISNULL(SupportDS.DisplayName,SupportEnum.IncidentTierQueuesValue),
SupportEnum.IncidentTierQueuesId AS SupportId,
Status = ISNULL(StatusDS.DisplayName, StatusEnum.IncidentStatusValue) ,
StatusEnum.IncidentStatusId AS StatusId,
AssignedTo.DisplayName AssignedToUserName,
AssignedTo.UserDimKey AssignedToUserId
FROM dbo.IncidentDimvw I
INNER JOIN dbo.WorkItemDimvw WI ON I.EntityDimKey = WI.EntityDimKey
LEFT OUTER JOIN dbo.WorkItemAboutConfigItemFactvw ON dbo.WorkItemAboutConfigItemFactvw.WorkItemDimKey = WI.WorkItemDimKey   AND (@IncludeDeleted = 1 OR dbo.WorkItemAboutConfigItemFactvw.DeletedDate IS NULL)
LEFT OUTER JOIN dbo.WorkItemAboutConfigItemFactvw CIFctForFilter ON CIFctForFilter.WorkItemDimKey = WI.WorkItemDimKey      AND (@IncludeDeleted = 1 OR CIFctForFilter.DeletedDate IS NULL)
LEFT OUTER JOIN dbo.IncidentClassificationvw AS ClassEnum ON I.Classification_IncidentClassificationId = ClassEnum.IncidentClassificationId
LEFT OUTER JOIN dbo.DisplayStringDimvw ClassDS ON ClassEnum.EnumTypeId=ClassDS.BaseManagedEntityId
AND ClassDS.LanguageCode = @LanguageCode
LEFT OUTER JOIN dbo.IncidentTierQueuesvw AS SupportEnum ON I.TierQueue_IncidentTierQueuesId = SupportEnum.IncidentTierQueuesId
LEFT OUTER JOIN dbo.DisplayStringDimvw SupportDS ON SupportEnum.EnumTypeId=SupportDS.BaseManagedEntityId                    AND ClassDS.LanguageCode =
@LanguageCode
LEFT OUTER JOIN dbo.IncidentStatusvw AS StatusEnum ON StatusEnum.IncidentStatusId = I.Status_IncidentStatusId
LEFT OUTER JOIN dbo.DisplayStringDimvw StatusDS ON StatusEnum.EnumTypeId=StatusDS.BaseManagedEntityId                      AND StatusDS.LanguageCode
= @LanguageCode
LEFT OUTER JOIN  dbo.WorkItemAssignedToUserFactvw ON dbo.WorkItemAssignedToUserFactvw.WorkItemDimKey = WI.WorkItemDimKey     AND (@IncludeDeleted = 1 OR dbo.WorkItemAssignedToUserFactvw.DeletedDate IS NULL)
LEFT OUTER JOIN dbo.UserDimvw AS AssignedTo ON dbo.WorkItemAssignedToUserFactvw.WorkItemAssignedToUser_UserDimKey = AssignedTo.UserDimKey
WHERE
((-1 IN (Select value from @tableClassification)) OR (I.Classification_IncidentClassificationId IN (Select value from @tableClassification)))
AND
((-1 IN (Select value from @tableSupportGroup)) OR (I.TierQueue_IncidentTierQueuesId IN (Select value from @tableSupportGroup)))
AND
((@ID IS NULL) OR (I.Id IN (Select value from @tableID)))
-- exec ServiceManager_Report_Incidents @Classification=N'281,415,9,135',@SupportGroup=N'72,-1,69,43',@ID=N'IR55145'

Upgrading DPM 2012 SP1 to DPM 2012 R2 fails (DPM Setup is unable to connect to the specific instance of SQL Server Reporting Service (ID: 33431)

The Background:
1. DPM 2012 SP1 was originally installed on a server with local SQL 2008 R2 instance (SQL was installed as part of DPM)
2. SQL database was upgraded to SQL 2012 SP1
Now I want to upgrade DPM 2012 SP1 CU3 to R2. It is throwing the following error. Any help would be appreciated.

This absolutely fixed my issue. I had upgraded my version of SQL and was then trying to upgrade DPM 2012 to 2012R2 and I could not figure out where the installation was querying old version of the reporting services.
DPM Log Before:
[6/4/2014 2:53:32 PM] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
[6/4/2014 2:53:32 PM] Information : Querying WMI Namespace: \\DPMServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v10\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
[6/4/2014 2:53:32 PM] * Exception : => System.Management.ManagementException: Provider load failure
DPM Log After:
[6/4/2014 3:25:36 PM] Information : SQL Server 2008 R2 SP2 instance MSDPM2012 is not present on this system.
[6/4/2014 3:25:36 PM] Information : Query WMI provider for SQL Server 2008.
[6/4/2014 3:25:36 PM] Information : Querying WMI Namespace: \\DPMServer\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$MSDPM2012' and PropertyName='Version'
[6/4/2014 3:25:36 PM] Information : SQL Server 2008 R2 SP2 instance MSDPM2012 is present on this system.
[6/4/2014 3:25:36 PM] Information : Inspect context initialized with
SQL Server namespace: \\{0}\root\Microsoft\SqlServer\ComputerManagement11
Reporting namespace: \\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
SqlServerDetected: True
[6/4/2014 3:25:36 PM] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
[6/4/2014 3:25:36 PM] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
[6/4/2014 3:25:36 PM] Information : **********************************************************************************
Thanks for This FIX!

Exporting Recipients details from all the Notification Subscriptions in SCSM 2012 Sp1

Hi Team,
Do we have any powershell script to export the recipients details from all the notification subscriptions from SCSM 2012 SP1. I have tried usind ChildEnumeration, but it didn't return any data. Sooner response would be highly appreciated.
Thanks,
Dinesh
Thanks & Regards, Dinesh

Subaru, your solution is not sending the email from different domains though. And it is initiated manually through the console.
We are looking for the ability to have subscriptions send emails from different domains or email addresses depending on queues or similar. In my research, I think the only viable option is to use orchestrator as mentioned above and have it monitor
tickets for criteria specified. Its a pain and a huge limitation in my opinion.
I think the bottom line is to not use subscriptions for a full loop email system. only use it for emails that will not be replied to.

IN SCSM 2012 SP1 email notification duplicating

We use SCSM 2012 SP1 in our environment. We create mail notification's for incident assignment. But a mail notification for an incident under same template going 2 times.
How can we configure it like for an incident same mail go for single time not twice.
Please help me ASAP.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

Dear Mithun,
if email notifications are duplicated, it means that 2 workflows that send emails are running on the same incident, kindly check your workflows and their criterias.
Best Regards
Jreij12

"back submit cancel " not show in ssp scsm 2012 sp1

hello
which may be the reason that my SSP in SCSM 2012 sp1 does
not show the buttons to submit my request to serve
rmanager?
<- Back   Submit ->
  Cancel
  button
are not displayed ... can someone help me?
Thanks

Resolved : Stamped "create request button" in sharepoint web part
A glaring oversight on my part
Sorry.

Issue while Upgrading vmm 2012 sp1 to vmm 2012 R2

Hi,
We are trying to upgrade the vmm setup to 2012 r2 ,we retained the existing vmm database
While upgrading to vmm 2012 r2 , got the below warning message:
"The VMM database contains one or more services in a failed state. Upgrading to VMM in System Center 2012 R2 is not recommended. Retry the upgrade after you have reinstalled VMM for System Center 2012 SP1 and repaired or removed these services. Click
Cancel to exit the upgrade."
Tried to find the bug using the vmm logs file like
errlevel
setupwizard
vmmserver
In erlevel log, the entry was "0".
Any idea what the issue is????

1. You just need CU3 - these are cumulative
2. Sure, you can take a temporary snapshot. You need to take a SQL backup also.
3. Don't forget to test the upgrade process on a copy of your site database (use /testdbupgrade)
This guide may help you
http://www.gerryhampsoncm.blogspot.ie/2013/10/in-place-upgrade-sccm-2012-sp1-to-r2.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Upgrading SCVMM 2012 SP1 to 2012 R2

Please forgive me I've missed something obvious, but I have yet to see any documentation on how to upgrade SCVMM 2012 SP1 to the just-released R2. Running the setup detects that two components are already installed on the machine (the server management console)
and doesn't appear to present any upgrade options. The version its detecting as installed is SP1, not R2.
What's the upgrade process? Is there a document that discusses the 2012 SP1 -> R2 upgrade?
Thanks

Upgrading to Virtual Machine Manager 2012 R2
VMM also does not support in-place upgrade. You have to uninstall VMM and retain the database. Before uninstalling VMM first uninstall any Update Rollup if you have such. After uninstalling VMM, ADK (Windows Assessment and Deployment Toolkit) 8.0 also have
to be uninstalled. Before starting the VMM 2012 R2 installation you have to install ADK
8.1. After VMM 2012 R2 installation is easy. You have to point a few settings, the installation will detect that you want to make upgrade to existing database and after a few minutes you will be upgrade to R2. After successful upgrade you need to start
the console and update your VMM agents also.
Kirpal Singh

Can I upgrade from SP2010 SP1 to Sp2013 Sp1 without upgrading to SP2010 SP2 first

Hi
I have a farm currently on Sp2010 Sp1 running on Windows 2008 R2.
I want to upgrade to Sp2013 SP1 running on Windows 2012 R2.
Do I need to upgrade the Sp2010 SP1 farm to SP2010 SP2 before I upgrade to Sp2013 SP1.
The plan is to build SP2012 R2 first followed by installing SP2013 Sp1.
The we will then move the content database (119 GB with 500GB of Remote Blob Storage) from Sp2010 environment to the Sp2013 Sp1 environment and use the PowerShell command Upgrade-SPContentDatabase to do the upgrade. But do I need to upgrade
SP2010 SP1 to SP2010 Sp2 before moving the content database to Sp2013 SP1 environment.
Thanks
Nigel
Nigel Price NJPEnterprises

Yes, you can actually go from SharePoint 2010 RTM to SharePoint 2013 (any build). The only exception to that is if you're using RBS on SharePoint 2010, then you must have applied SharePoint 2010 SP1 first.
The December 2012 CU for SharePoint 2010 does have a wide list schema check, so it may be a good idea to apply that prior to the upgrade to 2013, but it isn't a requirement.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Upgrade SCSM to SP1

Similar Messages

Maybe you are looking for