Upgrade sequence, start with R/3 or BW

Dear expert,
There are R/3 4.6C and BW 3.5 in our environment. We planed to upgrade both to ECC6 and BI 7.0
I'm not sure that what is the best sequence to upgrade these systems in my upgrade plan. We should do upgrade on R/3 4.6C to ECC6 first and then continue with BW 3.5 to BI 7.0?
Have any body got an experience like this, kindly help.
Regards,

In fact - it doesn´t matter.
A BW 3.5 can talk to an ERP 6.0 system as well as the other way around.
Keep in mind, that you need to migrate both to Unicode if you plan to use the portal as frontened for BI.
Markus

Similar Messages

How to have a sequence start with specific number in mapping

Hi,
I can not find a way in the mapping to specify the "start with" attribute for sequence. Currently I have to execute this from sqlplus; select max(id) from tableA, then create sequence start with max(id)+1. I would like to integrate this step into owb. I'm using 9ir2. Thanks.

You can do this from a stored procedure that you invoke from your pre-mapping trigger:
- Scan the source and get the max_id
- execute immediate 'drop sequence; create sequence ... start with '||max_id+1
Etc.
Good luck, Erik Ykema

Create sequence start with variable

Trying to create a sequence within plsql passing a variable into the start with clause. I am getting the 'ora-01722: invalid number' error. Thoughts?
-- Created on 06-Jun-07 by CARSONBC
declare
-- Local variables here
v_staff_proxy_user_seq_num number;
begin
-- find max value
select max(staff_proxy_user_id)+1
into v_staff_proxy_user_seq_num
from icmr32dv.staff_proxy_user;
-- create sequence
execute immediate 'create sequence icmr32dv.staff_proxy_user_seq2 minvalue 1 maxvalue 999999999999999999999999999 start with v_staff_proxy_user_seq_num increment by 1 nocache';
end;

What is the requirement of creating sequnce dynamically.?
may be you can try this?
execute immediate 'create sequence icmr32dv.staff_proxy_user_seq2 minvalue 1 maxvalue 999999999999999999 start With '|| v_staff_proxy_user_seq_num || ' increment by 1 nocache';

Sequence starting with specific number

Hi,
Is it not possible to create a sequence in ODI starting with a specific number. An example is such as a sequence starting from 10,000 and incrementing by 1.
The reason I am asking is because , in the ODI sequence tab, although there is an option for specifying increment factor, there is no place to mention the first element
of the sequence.
Kindly suggest.

Hi,
Its not recommend to use ODI sequence as it needs to follow some process for implementation, its advisable to use DB sequence for surrogate columns.
So please use DB sequence and call it in ODI mapping using the below syntax,
<SCHEMA_NAME>.<SEQUENCE_NAME>.NEXTVAL
FYR: http://odiexperts.com/odi-sequence
Thanks,
Guru

Render tiff sequence starting with comp frame# in adobe media encoder?

Hi
Does anybody know how to render out a tiff sequence with AME using an after fx comp where the tiff frame numbering generated by AME reflects the same frame numbering in an After fx comp? so if my work area bar in AE comp starts at frame 73 then the first tiff frame rendered out of AME starts at frame 73. at present it seems to always start at 0 which is no good because i then have to renumber all the frames to ensure they replace the correct frames in the image sequence. i already know how to do this rendering directly out of AE. however its nice using AME because you can continue to work in AE while AME runs in the background.
cheers!
angus

Unfortunately you cannot specify a start file number.
That would make a good feature request.
Cheers
Eddie

HP Officejet 8600 scan - How to force scan number sequence starting with a number of my choice

Using HP Officejet 86XX on WIn7 - with ADF.
I scan a lot of docs via the ADF and all docs scanned has a number in sequence noted at the documents.
Is there any way to decide which number the HP scan software shall start its numbered sequence? Eg. prefix "Document-" and then force the sequence-number to start at 00200, on order for the next file sequence number to be 00201 and then 00202 and so on??

Hi , I may be able to help you with your scan settings, but I want to make sure I understand what you are trying to accomplish - so let me know if this isn't what you are looking for. Click on the HP Printer Assistant icon on your desktop (It will look like your printer, and be labeled to match)In the HP Printer Assistant click on Scan a Document or PhotoChoose the shortcut you are selecting on the front panel of the printer (ie Save as PDF)Click on Advanced Settings You can modify your scanner settings, I believe you want to change the settings on the Destination tab.Base File Name: First part of the file name, so in your example "Document-", the scanner will automatically number it after each scan.. eg. Document-0001 will be your first scan, Document-0002, will be the second.Save Location: You can even setup a new folder for the scans After you change the settings, try the scan from the front panel of your printer. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

Powerbook G4 Titanium 15, 500mhz won't upgrade or start with DVD

Hello
I'll try to be brief!
I have been given a Powerbook G4 Titanium 15, 500mhz. 256 mb RAM with a 20gb hard drive. It starts up OK from the hard drive with OSX 10.1.5.
I'd like to upgrade the OSX.
It will not start from a OSX 10.4 startup disk.
If I connect to the internet and run and run Software Update it will not offer any software upgrade.
If I start it as a target firewire disk and copy a 10.4.11 update .dmg to it's desktop from my Macbook Pro, then restart the Powerbook, the file disappears when I click on it. It may reappear a little later but will disappear again when clicked on. A usb flash drive will not mount when inserted into the usb slot.
Can anyone tell me what's going on?
Many thanks
Howard

Hello
Thank you very much for your reply:
What do you mean by "OSX 10.4 startup disk"? Is it the grey original system disk from another computer model? They are machine specific so that could be reason no.1
Fair point – I thought about that which is why I then used a Tiger full install disk.
If however its a full 10.4 retail disk you need 3Gb free space on your hard drive.
The G4 has plenty of free disk space.
Beyond that Software Update will only update within the version of OSX installed on the computer - in your case up to the final release of 10.1 Puma - 10.1.5 which is what you already have installed.
Fair enough. That makes sense.
The 10.4.11 update dmg you are trying to use is only designed to update an already installed earlier version of 10.4. If you want to install Tiger you will need to track down a full install disk if that's not what you already have.
Yes, fair point. I may have been clutching at straws there after the full install disk failed to boot the laptop.
Don't know about the USB drive - what's on it? Ideally you would run a hardware test on the PB - if you have the original install disk for the PB you'll find it on there.
I know you can't boot from a USB by the way.
I ran diagnostics on the hard drive when I booted it as a firewire target disk. A few footling details were corrected but nothing surprising.
The big deal I think is getting data on to the hard disk and why does it vanish when you click on it?
I'm sure I have managed to boot from a grey installer disk even if it does not then allow you to actuallly exeute the install. But this won't boot from anything and won't 'see' files tht have been saved to it. Puzzling.
Thank you again
Hoawrd

Sequence caching with oracle

Hi,
In my application, I use toplink as a JPA provider. For performance reasons, I defined an allocationSize on sequence generator for some persistence objects. I read some documentation to understand how it works, the result of my research is that the allocationSize of sequence generator must match with the increment value of the sequence in database.
So here is my question, what if my sequence define a cache in the database ? For a cache of 1000 values on the application (or server) side, I can create a sequence like this : sequence myseq increment by 1000 cache 20.
Does it mean that 20 values will be cached or 1000*20 values will be cached ? Is the cache size defined per session or for all the sessions of the database ?
Thanks.
Will.

ok.... so if my sequence starts with 10000 and has a cache of 5, values from 11000 to 15000 will be cached, not values from 10000 to 100020 ?"5" values will be cached. You will find the following example to be helpful.
[cache]
SQL> create sequence myseq start with 10000 cache 5;
Sequence created.
SQL> select increment_by, cache_size, last_number from user_sequences where sequence_name = 'MYSEQ';
INCREMENT_BY CACHE_SIZE LAST_NUMBER
1 5 10000
SQL> select myseq.nextval from dual;
NEXTVAL
10000
SQL> /
NEXTVAL
10001
SQL> /
NEXTVAL
10002
SQL> /
NEXTVAL
10003
SQL> /
NEXTVAL
10004
SQL> select increment_by, cache_size, last_number from user_sequences where sequence_name = 'MYSEQ';
INCREMENT_BY CACHE_SIZE LAST_NUMBER
1 5 10005
SQL> select myseq.nextval from dual;
NEXTVAL
10005
SQL> select increment_by, cache_size, last_number from user_sequences where sequence_name = 'MYSEQ';
INCREMENT_BY CACHE_SIZE LAST_NUMBER
1 5 10010
SQL>
Asif Momen
http://momendba.blogspot.com

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I want to backup my phone before upgrading to ios5 but I get an error message itunes could not back up the iphone because a session could not be started with the iphone. Please help me..

I want to backup my phone before upgrading to ios5 but I get an error message: itunes could not back up the iphone because a session could not be started with the iphone. I want to go to ios5, but I do not want to lose everything. I've gone to my device under preferences and I have no backup currently.
I have a Verizon Iphone 4 and a PC.
Please help me..

Hi Judy,
Im using windows 7 and im not a computer wizard, i've tried the method by using the instruction for Win7 but it does not work, same problem still exist.
Could uninstall itunes and reinstall it back on my pc fix my problem, please advise...... Many Thanks!
VBR,
ray

After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks

After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks

Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.

Sql Developer 1.5.5 bug with large sequence start values.

We have a small table in our sql server 2005 schema (~700) rows. Its primary key is a bigint. We randomly generate ids for this table (don't ask). We have ids for this table which are larger than 2147483647. (java.lang.Integer.MAX_VALUE). I'm using a Windows 10g instance as the repository:
SQL> select * from v$version
2 ;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Capturing this model works fine.
Converting this model works fine.
When the converted model is "Generated", Sql Developer stops generating the script before the worksheet window is opened with the generated sql. If run from sqldeveloper/bin, this exception is output to the console:
java.lang.Exception: java.util.NoSuchElementException
at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.start(AbstractMigrationProgressRunnable.java:141)
at oracle.dbtools.migration.workbench.core.GenerateInitiator.launch(GenerateInitiator.java:42)
at oracle.dbtools.raptor.controls.sqldialog.ObjectActionController.handleEvent(ObjectActionController.java:149)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:524)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:855)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:496)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1225)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1266)
at java.awt.Component.processMouseEvent(Component.java:6134)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
at java.awt.Component.processEvent(Component.java:5899)
at java.awt.Container.processEvent(Container.java:2023)
at java.awt.Component.dispatchEventImpl(Component.java:4501)
at java.awt.Container.dispatchEventImpl(Container.java:2081)
at java.awt.Component.dispatchEvent(Component.java:4331)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4301)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3965)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3895)
at java.awt.Container.dispatchEventImpl(Container.java:2067)
at java.awt.Window.dispatchEventImpl(Window.java:2458)
at java.awt.Component.dispatchEvent(Component.java:4331)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.util.NoSuchElementException
at oracle.dbtools.metadata.persistence.PersistableObjectIterator.next(PersistableObjectIterator.java:131)
at oracle.dbtools.migration.generate.GenerateWorker.generateSequences(GenerateWorker.java:862)
at oracle.dbtools.migration.generate.GenerateWorker.generateIndividualSchema(GenerateWorker.java:456)
at oracle.dbtools.migration.generate.GenerateWorker.generateSchema(GenerateWorker.java:365)
at oracle.dbtools.migration.generate.GenerateWorker.runGenerate(GenerateWorker.java:220)
at oracle.dbtools.migration.workbench.core.ui.GenerateRunner.doWork(GenerateRunner.java:71)
at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.run(AbstractMigrationProgressRunnable.java:161)
at oracle.dbtools.migration.workbench.core.ui.MigrationProgressBar.run(MigrationProgressBar.java:569)
at java.lang.Thread.run(Thread.java:619)
A problem row can be viewed by issuing this query against the repository:
select * from md_sequences where seq_start > 2147483647;
We have one row returned. The oracle.dbtools.metadata.persistence.MdSequence class uses a java.lang.Integer value to store the start value for the sequence. The value stored in the repository's MD_SEQUENCE table overflows the Integer type.
Updating the SEQ_START column in the MD_SEQUENCE table fixed our problem. (Well, I can now generate the schema. I may have other problems with the sequence being off).
I've written this post to save someone else the day it took me to diagnose this problem with Sql Developer 1.5.5. At the very least Sql Developer should inform the user that it could not generate the script because of the large sequence start value. It basically swallows any error and terminates script generation without any type of feedback.

Update: I was able to recreate the problem!
1. Create a new table (I used TEST).
2. Mark first column af primary key.
3. Save the table.
Notice the name of the primary key index created: (TEST_PK in my case)
4. Edit the table.
5. Under constraints change the name of the primary key constraint.
6. Save the table.
Notice that the index still has its original name.
7. Edit the table.
8. Change something.
9. Attempt to save changes (Fails).
Conclusion:
Either SQL Developer should be aware of indexes with different name than a constraint,
or when SQL Developer changes the name of a constraint with an index, both the constraint and the index should be renamed.

Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?

Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?
I change everything into +63 and i thought everything is already fine,.. and then now , i dont know what happened why it doesnt recognize numbers with +63 anymore

Hello hsielglad,
Thank you for your question. iTunes 11.1 is required to update to and sync with iOS 7. If you are still running iTunes 10.6.3, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/HT5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M.

Can't upgrade iMac to Yosemite "because Mac OS X does not recognize internet addresses starting with "macappstores"

I want to upgrade Snow Leopard (10.6.8) to Yosemite. The download page on Apple website shows that my system meets all requirements;
however, when I click to download I get the following error message. The browser freezes and closing Safari is the only way I can get out of it:
safari cant open "macappstores://itunes.apple.com/webobjects/MZStore.woa/wa/viewSoftware?id=9150 41082&mt=12&ls=1&ign-msr=http%3A%2F%2Fwww.apple.com%2Fosx%2F" because Mac OS X doesn't recognize internet addresses starting with "macappstores"
iMac, purchased new in 2009
Model Identifier: iMac9,1
     OS 10.6.8
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 2 GB
     Hard drive 320 GB (plenty of unused memory)
Bus Speed: 1.07 GHz
Boot ROM Version: IM91.008D.B08
Please help! What is wrong?

You are probably going to want to upgrade your memory (RAM). While 2 GB is the stated minimum, realistically 4 GB seems to be the consensus minimum. More is better.
The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB.
Crucial
Other World Computing
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Do a backup before installing.

Just tried to upgrade to SnowLeopard with new software. iLife failed to download and now the computer will not start up--grey screen with lines going round and round in a circle. What can I do to get it to start up?

Just tried to upgrade to SnowLeopard with newly purchased software disc. iLife failed to download and when I tried to restart the computer, it will not do so--just get a grey screen with the lines going around and around. Any ideas about how to get it to start?

Mac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD

Upgrade sequence, start with R/3 or BW

Similar Messages

Maybe you are looking for