Upgrade sequence WAS 640 SP3 unix

Can I upgrade to SP9 after I have installed Portal SP3?
If I can't upgrade to SP9 after installing portal, can I simply delete the intance under usr/sap/JC00, upgrade WAS 640 to sp9 and then reinstall portal?
Thanks
John

Hello John, I do not think deleting the portal will be necessary. I am in the process of upgrading the portal now (currently upgrading the WEB AS to SP9). All be it, I am doing it on Windows 2000MSSQL Server but I think it should be fairly the same. Here's the process we kind of worked out in another thread,
/community [original link is broken]
1) Install Web AS 6.30 SP3
2) Upgrade Web AS 6.30 to SP9
3) Install EP 6.0 SP3
4) Upgrade EP 6.0 SP3 to SP9
5) Follow Directions in note 720298
5) Install KMC 6.0 SP4
6) Upgrade KMC 6.0 SP4 to SP9
I will keep you posted on how everything went.

Similar Messages

Java parameters for WAS 640 on unix

Does anyone have a solid set of WAS 640 java parameters for the server on Solaris. Can't seem to get the engine stable and I have changed java params according to SAP note for Sun jdk but still no luck.
max heap,
Permsize etc etc.....
Thanks
John

Hi,
I hope the answer given was helping... If yes, please consider awarding points and mark the question as answered. If no, please come back to give feedback why the hint did not bring you foward. This not only for being polite against me, but also for others running into the same issue to get feedback if they should go the way given in the answer or where else a solution could be found.
Thanks in advance
Detlev

WAS 640 Upgrade to SP11

I am planning to upgrade my laptop WAS 640 SP9 installation to SP11. Where can I finds a document that outlines the steps to do this upgrade ? How about the upgrade files ? Where to find these ? Please advise.
Thanks !

HI Srikanth..
Just now i am also going for an upgradation to SP11.So i hope i can help u a bit on that.
The first thing u shud do is to get the required pdf guide
(Support Package Stack Guide - SAP NetWeaver 04 SP Stack 11) from service.sap.com/instguidesnw04..It will give u the step by step upgradation help.
Below are the patches or upgrade files in ur words , that u need to download from service.sap.com/swdc
1)CTRLORA11_0-20000118.SAR
2)J2EERT11_0-10001982.SAR
3)J2EERTOS11_0-20000118.SAR
4)SAPINST11_0-20000118.SAR
(Assuming ur underlying DB is oracle & window as ur OS)
Extract the files using SAPCAR and start ur journey towards SP11.
Note: Do follow the pre- & post-installtion steps.
Do send me the feedback n also the points , if it helps u.
Regards,
sandip agarwal

After upgrade the MDM 71 Sp3 to SP4 the MDS dos not startet

Hello,
I have an problme after a update from MDM 7.1 SP3 to SP4. The update was finished successful but my MDM Server (MDS) stopped after the starting wiht follow message
Starting: /usr/sap/TBD/MDS10/exe/mds-r - Wed Mar 3 10:16:31 CET 2010
SunOS Q4DE8NSYM07 5.10 Generic_141415-04 i86pc i386 i86pc
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) unlimited
stack(kbytes) 10240
coredump(blocks) unlimited
nofiles(descriptors) 4096
memory(kbytes) unlimited
-rwxr-xr-x 1 tbdadm sapsys 179664288 Feb 13 20:52 /usr/sap/TBD/MDS10/exe/mds-r
Application Started.
mds Version 7.1.04.120
 Built on 2010-Feb-13
Client Interface Version 7.1.04.07
 - Interface CRC=0x9229b868
MDS Admin Interface Version 7.1.04.07
 - Interface CRC=0xb7b7fe03
MDS Public Interface Version 7.1.04.03
 - Interface CRC=0xd7594919
Web Interface Version 7.1.04.11
 - Interface CRC=0xb8de6193
Application Stopped.
Application Started.
[INFO] <MDM/Servers/MDS/MDSCommon/XCSGlobalFunctions.cpp:415> "User authentication method: Repository"
increasing thread stack from 0 kB to 1024 kB...
Loading shared library: ncs.so ...
ncs.so loaded.
increasing thread stack from 0 kB to 1024 kB...
increasing thread stack from 0 kB to 1024 kB...
increasing thread stack from 0 kB to 1024 kB...
Ending: /usr/sap/TBD/MDS10/exe/mds-r (rc=134) - Wed Mar 3 10:16:57 CET 2010
When I start it again it dosn't work. With th update with my development System I had no problem.
Have anybody an idea?
Thanks
Thomas

Hi,
I would suggest you to re-install MDM server again.
Also refer, SAP Note 1432315 for upgrading MDM 7.1 SP3 to MDM 7.1 SP4.
Go through section, B4. Update MDM Servers.
Again, I would suggest you to go through this SAP Note 1432315
Also refer SAP Note, Note 1359600 - MDM stopped communicating after upgrading to 7.1.03 or Higher.
It tells that it is something related to TCP Port/firewall restriction Change. Please check this SAP Note for more details.
Kindly mark the thread as Answered as your Problem solved so that others can benefit if they have similar issue.
Thanks and Regards,
Mandeep Saini
Edited by: Mandeep Singh Saini on Mar 3, 2010 12:55 PM
Edited by: Mandeep Singh Saini on Mar 3, 2010 4:57 PM

WAS 640 SR1 dispatcher running not server

Any clue what is happening here?
UNIX WAS 640
Dispatcher running but server not connected.
Here is the server0 work log:
stdout/stderr redirect
node name   : server0
pid         : 21774
system name : P00
system nr. : 00
started at : Thu Jan 27 15:34:28 2005
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addI
viewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBased
SecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator g
enerateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude iaik/security/md/SHA a
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem
startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConf
igurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHiera
rchicalContext lookup
SAP J2EE Engine Version 6.40   PatchLevel 87289.311 is starting...
Loading: LogManager ... 1225 ms.
Loading: PoolManager ... 7 ms.
Loading: ApplicationThreadManager ... 229 ms.
Loading: ThreadManager ... 68 ms.
Loading: IpVerificationManager ... 124 ms.
Loading: ClassLoaderManager ... 26 ms.
Loading: ClusterManager ... 674 ms.
Loading: LockingManager ... 158 ms.
Loading: ConfigurationManager ... 227980 ms.
Loading: LicensingManager ... 68 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (54 ms).
Service memory started. (264 ms).
Service jmx_notification started. (286 ms).
Service cross started. (385 ms).
Service file started. (318 ms).
Service trex.service started. (451 ms).
Service userstore started. (17 ms).
Service timeout started. (33 ms).
Service p4 started. (224877 ms).
Service classpath_resolver started. (29 ms).
Timed out services:
Service ssl.
Service connector.
Service tc.monitoring.logviewer.
Service keystore.
Service log_configurator.
Service shell.
Service webdynpro.
Service appclient.
Service com.sap.security.core.ume.service.
Service http.
Service locking.
Service tcsecwssec~service.
Service tcsecvsi~service.
Service pmi.
Service tcsecsaml~service.
Service sld.
Service jms_provider.
Service basicadmin.
Service classload.
Service iiop.
Service dbpool.
Service licensing.
Service adminadapter.
Service failover.
Service telnet.
Service jmsconnector.
Service servlet_jsp.
Service ejb.
Service dsr.
Service monitor.
Service apptracing.
Service tcsecdestinations~service.
Service tcsecsecurestorage~service.
Service naming.
Service security.
Service configuration.
Service applocking.
Service jmx.
Service ts.
Service deploy.
Service webservices.
Service tceCATTPingservice.
Service javamail.
Service rfcengine.
ServiceManager started for 304824 ms.
Framework started for 535609 ms.
SAP J2EE Engine Version 6.40   PatchLevel 87289.311 is running!
PatchLevel 87289.311 November 18, 2004 20:31 GMT
Service tcsecvsi~service started. (450027 ms).
Service tcsecwssec~service started. (674372 ms).
Service deploy started. (451624 ms).
Service log_configurator started. (677171 ms).
Service locking started. (7 ms).
Service apptracing started. (187 ms).
Service http started. (368 ms).
Service naming started. (561 ms).
Service failover started. (59 ms).
Service ts started. (142 ms).
Service javamail started. (181 ms).
Service licensing started. (13 ms).
Service jmsconnector started. (175 ms).
Service appclient started. (179 ms).
Service connector started. (321 ms).
Service configuration started. (29 ms).
Service webservices started. (911 ms).
Service dbpool started. (226529 ms).
0.000: [GC 0.000: [ParNew: 174080K->15248K(261120K), 0.1430873 secs] 174080K->15
248K(1461248K), 0.1433358 secs]
Service com.sap.security.core.ume.service started. (228688 ms).
Service security started. (3854 ms).
Service classload started. (138 ms).
Service applocking started. (147 ms).
Service shell started. (310 ms).
Service tceCATTPingservice started. (27 ms).
Service webdynpro started. (182 ms).
Service ejb started. (833 ms).
Service servlet_jsp started. (955 ms).
Service jmx started. (837 ms).
Service basicadmin started. (604 ms).
Service adminadapter started. (137 ms).
Service tc.monitoring.logviewer started. (951 ms).
Service monitor started. (1225 ms).
Service dsr started. (224944 ms).
Service telnet started. (898797 ms).
> Service keystore started. (1123884 ms).
> Service rfcengine started. (1123140 ms).
Service ssl started. (13 ms).
Service tcsecsecurestorage~service started. (104 ms).
Service tcsecdestinations~service started. (154 ms).
Service pmi started. (238 ms).
Service sld started. (667 ms).
Service jms_provider started. (1124316 ms).
Thanks
John

Hi Ryan / Benny..
I ran in to same issue but the difference is my SAP J2EE Engine is running on Windows XP with SQL Server 2000 as backend. Here's the log from the dispatcher-
[OS: Windows XP] [VM vendor: Sun Microsystems Inc.] [VM version: 1.3.1_09-b03] [
VM type: Java HotSpot(TM) Client VM]
Warning: Current VM is not listed in ".\managers\vm_support.properties" !
SAP J2EE Engine Version 6.20 PatchLevel 78993.20 is starting...
Loading: LogManager ...
Loading: R3StartupManager ...
Loading: ThreadManager ...
Loading: TimeoutManager ...
Loading: MemoryManager ...
Loading: PoolManager ...
Loading: PolicyManager ...
Loading: ConnectionsManipulator ...
Loading: IpVerificationManager ...
Loading: ClusterManager ...
Loading: ClassLoaderManager ...
Loading: PortsManager ...
Loading: LockManager ...
Loading: ServiceManager ...
Loading core services:
Starting core service log ... done. (2664 ms)
Starting core service p4 ... done. (2243 ms)
Starting core service security ... done. (230 ms)
Starting core service monitor ... done. (61 ms)
Starting core service admin ... done. (591 ms)
Core services loaded successfully.
Loading additional services:
Starting service httptunneling ... done. (121 ms)
Starting service jms ... done. (50 ms)
Starting service telnet ... done. (140 ms)
Starting service shell ... done. (601 ms)
Starting service r3startup ... done. (430 ms)
Starting service http ... done. (501 ms)
Additional services loaded successfully.
SAP J2EE Engine Version 6.20 PatchLevel 78993.20 is running!
PatchLevel 78993.20 May 23, 2004 19:12 GMT
>
Let me know if you have any thoughts off on this problem.
Thnx
-Smitha

Startup File for WAS 640

Hi
I installed WAS 640 in my system
i am integrating that server with JProb.
When i am integrating, the JProb asking the Startup Script file.
so please let me know the path of the server script file.
Thanks
Mukesh

Hi,
SAP profiles are stored in a special file directory. UNIX systems : /usr/sap/<SID>/SYS/profile
Windows NT systems: \<SAPGLOBALHOST>\sapmnt\<SID>\sys\profile\
( <SID> = SAP system name and <SAPGLOBALHOST> = name of the NT machine on which the global profile directory is physically located)
The startsap script is generally present in the home directory of the UNIX user <sid>adm where SID is the SAP system name.
Regards,
Siddhesh

SharePoint Server 2013 Upgrade failure after Updating SP1 + Nov10 CU " Exception of type 'Microsoft.SharePoint.Upgrade.SPUpgradeException' was thrown"

After Successfully having SharePoint Server 2013 Farm Installation on 2 Servers AD + Central Admin Application server, OS: win server 2008 R2 Ent SP1.
I set up the configuration for SharePoint app and Workflow Manager to work properly on the Den environment, the time for SP1 running has come and after downloading the Service pack 1 of SharePoint server 2013 and completing the wizard, I run the SharePoint
2013 Configuration Wizard after installing SharePoint 2013 SP1, and the wizard failed on step 2 with the Error from the Log file as showing below,
"Task upgradebootstrap has failed with an unknown exception
01/04/2015 00:43:30 11 ERR Exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Exception of type 'Microsoft.SharePoint.Upgrade.SPUpgradeException' was thrown.
at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()"
Also I was not able to create websites like before, and the creating of new site is failed with error message :
"Failed to call GetTypes on assembly Microsoft.Office.TranslationServices, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c. Method not found: 'Microsoft.Office.Web.Common.ProcessImageInfo"
Is there any solution to my problem with SP1 of SharePoint Server 2013, I don't think that SP1 should generate such bugs in a stable environment.
Basel Badr ,SharePoint Specialist ,MCAD ,MCTS.

Hi Basel,
What edition of SharePoint do you have and what patch did you attempt to install?
If you are on SharePoint 2013 Enterprise, please make sure you are installing Service Pack 1 for SharePoint Server:
http://www.microsoft.com/en-us/download/details.aspx?id=42544
If you are on SharePoint 2013 Foundation, please make sure you are installing Service Pack 1 for SharePoint Foundation :
http://www.microsoft.com/en-us/download/details.aspx?id=42548
For more information, you can refer to the thread:
https://social.technet.microsoft.com/Forums/sqlserver/en-US/ba9656e9-837e-4261-b164-b5bdfe8adce3/why-does-machine-translation-fail-when-i-do-not-use-it?forum=sharepointgeneral
http://sharepoint.stackexchange.com/questions/84284/failed-to-call-gettypes-on-assembly-microsoft-office-translationservices
Best Regards,
Eric
Eric Tao
TechNet Community Support

Error while applying Java Patch 16 on WAS 640 ABAP+JAVA

Hello Masters,
I am in process of applying Patch 16 to my BW 3.5 WAS 640 ABAP+JAVA systems. I have successfully applied ABAP patch level to 16. Now I am applying to J2EE Patch 16 to system. I did prerequisite check and everything is okay. Platform - Sun Solaris 9, Oracle 9.2.0.6. When I click on apply Patch 16, it goes thru central instance profile, java home directory okay. After this it is asking me to supply file for JCE and I gave path for file "jce_policy-1_4_2.zip". after that it extracts this file to Java_home/jre and at point when it tries to extract visual.dat, it throws following error :
CJS-00030 Assertion failed: in
function () {
 if (!this.hasJ2EE()) {
 installer.writeTrace("Can't determine JAVA_HOME of instance " + this.getName() + ": no J2EE engine installed.");
 return undefined;
 var fmgt = new FileMgt();
 var instanceProfile = this.getProfile();
 var javaHome = instanceProfile.get("jstartup/vm/home");
 if (javaHome) {
 return javaHome.value();
 var pname = this.getDirInstance() + "/j2ee/cluster/instance.properties";
 var pNode = fmgt.getNode(pname);
 ASSERT_DEFINED(arguments.callee, pNode, "pNode(" + pname + ")");
 var stream = pNode.getFileStream("READ");
 ASSERT_DEFINED(arguments.callee, stream, "stream(" + pname + ")");
 var props = new R3Profile(stream);
 for (var it = props.propertyNames(); !it.isDone(); it.next()) {
 var p = it.get();
 if (p.name().indexOf("JavaPath") != -1) {
 return p.value();
 ASSERT(arguments.callee, false, "no property with JavaPath in its name found in file " + pname);
no property with JavaPath in its name found in file /usr/sap/QWA/DVEBMGS02/j2ee/cluster/instance.properties
ERROR 2006-08-03 14:57:30
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
WARNING 2006-08-03 14:57:30
The step checkIfSafeModeIsEnabled with step key ApplySupportPackage|ind|ind|ind|J2EE_Engine|6.30|0|PatchJ2eeEngine|ind|ind|ind|J2EE_Engine|6.30|0|checkIfSafeModeIsEnabled was executed with status ERROR.
WARNING 2006-08-03 14:58:54
An error occurred during the installation.
Your input will be greately appreciated and would reward points.
Thanks,
Digesh

Hello Digesh,
The firt thing please go to os level prompt for <SID>adm user and type echo $JAVA_HOME. What is the value that is reflected after issuing the above.
Also please check that your SAP-J2EE instance is running properly or not.
The JCE is used for Weak and strong encryption.
Also please check the instance.properties file. Does it contain proper parameter as per your SAP installation.
Regards,
Prem

Error while installing the WAS 640 SR1 unicode

Hi,
When I am trying to install WAS 640 SR1 On windows xp sp2. The following error I am getting. Can you help to fix this issue. I am attaching the trace file.
SAPinst is getting started.
Please be patient ...
guiengine: login in process.
INFO       2006-08-04 21:35:28 [syxxcfile.cpp:325]
           CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/CI/keydb.xml to: q0w9e9r8t7.1.xml.
INFO       2006-08-04 21:35:28 [syxxcfile.cpp:446]
           CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/CI/keydb.xml to: q0w9e9r8t7.1.xml.
INFO       2006-08-04 21:35:28 [synxcpath.cpp:834]
           CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\CI\q0w9e9r8t7.1.xml.
INFO       2006-08-04 21:35:29 [syxxcfile.cpp:325]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/CI/keydb.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/CI/keydb.xml to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/CI/keydb.1.xml.
INFO       2006-08-04 21:35:29 [syxxcfile.cpp:446]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/CI/keydb.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/CI/keydb.xml to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ORA_UC/CI/keydb.1.xml.
INFO       2006-08-04 21:35:29 [synxcpath.cpp:834]
           CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\CI\keydb.1.xml.
INFO       2006-08-04 21:35:30 [ianxbusprv.cpp:337]
           CIaNtUserPrivileges::add_impl(., MALLI-01UIT2PDX\malli, SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege)
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'MALLI-01UIT2PDX\malli' on host '.'.
INFO       2006-08-04 21:35:30 [synxcpath.cpp:834]
           CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\CI\summary.html.
PHASE      2006-08-04 21:35:30 [iaxxcwalker.cpp:416]
           CDomWalker::printPhaseInfo()
Prepare the installation program.
INFO       2006-08-04 21:35:38 [iaxxcwalker.cpp:59]
           CDomWalker::walk()
Installation start: Friday, 04 August 2006, 21:35:26; installation directory: C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\CI; product to be installed: SAP NetWeaver '04 Support Release 1> ABAP System> Oracle> Unicode> Central Instance Installation
INFO       2006-08-04 21:35:39 [iaxxbhosts.cpp:434]
           CIaOsHosts::getInfo()
Host operation t_HostInfo_SHARED processed successfully.
ERROR      2006-08-04 21:35:56 [syxxsyshlp.cpp:56]
           syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
FSL-00001 System call failed. Error 1 (Incorrect function.
) in execution of system call 'GetVolumeNameForVolumeMountPoint' with parameter (B:\), line (276) in file (synxcfsmnt.cpp).
ERROR      2006-08-04 21:35:56 [iaxxbmount.cpp:153]
           CIaOsMount::handleMount(PKdbClientTable table, PSyMount const& mount) const
MOS-01236 Could not determine information about file system MALLI-01UIT2PDX:, mounted at unknown.
WARNING    2006-08-04 21:35:56 [iaxxccntrl.cpp:477]
           CController::stepExecuted()
The step GetMountInfo with step key SAPSYSTEM_CI|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|GetMountInfo was executed with status ERROR.
SAPinst component stack:
========================
Preinstall|ind|ind|ind|ind|ind|0
Current script:
===============
var client = ;
client.keymap["tOS_Mounts"] = "=t_MountPoints_PRIVATE";
installer.setKdbClient(client);
var args = new Array();
var c_hostsCall = ;
installer.invokeModuleCall(c_hostsCall);
// Copy Template table
waps_copy_template_table("tNT_DriveMapping_TEMPLATE", context.get("tDriveMapping") );
WARNING    2006-08-04 21:36:05 [iaxxcsihlp.hpp:250]
           main()
An error occurred during the installation.
Exit status of child: 1
Appreciate for your quick reply.
Thanks,
Mallikarjun.M

Hi Malisetti,
This look like a problem with the installation target, seems like somehow the installation can't find or deal with the mounted volumne.
Are you trying to install WAS in an external device/storage?
Hope this help!
Juan
PS: please reward points if helpful

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

WAS 6.2 upgrade to WAS 7.0

Hi Experts,
We want to upgrade from WAS 6.2 to WAS7.0.
1. Can we directly upgrade from 6.2 to 7.0 we can bypass going to 6.4?
2. Or do we need to upgrade from WAS 6.2 to WAS6.4 and then to 7.0 ?
3. We also have few BSP applications on 6.2.
What would be the impact on them. Do we need to transport them after upgrade or do we need to reimplement them ( i.e. COpy, paste & activate ).
Any pointers would be very helpful.
Thanks,
Best regards,
Prashant

BSP applications? is it Java WAS or an ABAP WAS? If it is ABAP WAS, please re-post your question in the application server forum.
Thanks
Raj Balakrishnan

Was 640 java add in installation error 1332 - no mapping...

i am currently installing
the was 640 java add in for the was 640 abap.
i am logged in as /Sap_LocalAdmin and the installation fails.
Please check the following error messages:
INFO 2005-03-16 16:36:26
Successfully added privileges 'SeServiceLogonRight SeNetworkLogonRight SeDenyInteractiveLogonRight SeDenyRemoteInteractiveLogonRight' to account 'JDCKARLSRUHESAPServiceJXI' on host '.'.
INFO 2005-03-16 16:36:28
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'JDCKARLSRUHEjxiadm' on host '.'.
ERROR 2005-03-16 16:36:28
FSL-00001 System call failed. Error 1332 (No mapping between account names and security IDs was done.
) in execution of system call 'LookupAccountName' with parameter (NULL, jdcbwSAP_LocalAdmin, ...), line (305) in file (synxcaccmg.cpp).
ERROR 2005-03-16 16:36:28
FSH-00008 A system error occurred when executing function LookupAccountName. ErrorNo=1332
i don´t know exactly what to do now? should i edit the xml file or what can be done?
or am i wrong with my assumption, that the system´s reference to the group isn´t valid?

Hi,
i had the same problem too.
Actually i'm installing the "Sneak Preview SAP NetWeaver 2004 Slim Edition (Java)" on Windows 2003 DomainController. In this case the relevant settings are stored in "<Location_Of_SAPINST.EXE>\ADA\control.xml", which is being copied to "<SAPINST_INSTDIR>\j2ee_wp\installdefault\" during installation.
Before i started a new installation i searched the original "control.xml" for String "LocalAdmin".
I replaced:
'name:host + "
SAP_LocalAdmin"'
with
'name:this.getDomain() + "
SAP_LocalAdmin"'
and
'name:host + "
SAP_" + this.getSID() + "_LocalAdmin"'
with
'name:this.getDomain() + "
SAP_" + this.getSID() + "_LocalAdmin"'
The installation is still running at the moment, but far behind that point where the error always came up.
For me it looks very good.
SAP says installation on a DC is not supported, which not means that it would be impossible.
Remember to edit the "control.xml" at it's original location BEFORE you start the installation.
Good luck,
Philipp Kammerer

Perform an export for both ABAP & JAVA in one shot with WAS 640 SAPinst ...

Hello,
I have to perform an OS/DB Migration of a SAP XI 3.0 (WAS640-SR1), an ABAP + JAVA addin configuration.
I would like to know if SAPinst for WAS640 (and SR1) could perform an export for both ABAP & JAVA in one shot as it seems possible in NW7.0 SAPinst version. None of the WAS 640 OS/DB migration guides gives these possibility.
And if not not, could U confirm that I have to perform 1st an export (with R3LOAD) of ABAB stack, then an export (with JLOAD) of the JAVA one ?
And apply the same way for installation with R3load and JLOAD downloaded files ?
Thks in advance
Bernard Accoce
SAP Basis Consultant - TeamWork in Toulouse (France)

Hi Bernard,
No, both exports cannot be executed in one single step. You have to execute the procedure twice, once for ABAP and once for Java, like you already mentioned yourself..
For the import applies the same.
Kind regards,
Mark

Weblogic 6.1 server upgrade from SP2 to SP3

Hi All
We have weblogic server 6.1 SP2 installed on the solaris machine. Now we
have to upgrade our weblogic server 6.1 SP3. We also have downloaded the installable.
But that installable seems to over-write the previous weblogic server & installs
the server afresh. Is there any patch kinda thing available which allows me to
upgrade from SP2 to SP3 ? I don't want a fresh new install of SP3 server.
thanks in advance
-Kiran Rane

Upgrade installer from SP2 to SP3 is only available for paid BEA
customers. You need a login at http://support.bea.com
Kumar
kiran rane wrote:
Hi All
We have weblogic server 6.1 SP2 installed on the solaris machine. Now we
have to upgrade our weblogic server 6.1 SP3. We also have downloaded the installable.
But that installable seems to over-write the previous weblogic server & installs
the server afresh. Is there any patch kinda thing available which allows me to
upgrade from SP2 to SP3 ? I don't want a fresh new install of SP3 server.
thanks in advance
-Kiran Rane

Having problem in installing WAS 640 on Win 2k

Hi ,
I have installed the MS SQL Server successfully and now I wanted to install WAS 640 (ABAP + Java) on the same machine.
I had put all the parameters but when I am clicking the start button ,its giving me an errror:
Unable to create account hostname\dbwadm. The password doesnot meet the password policy requirements.
Can somebody tell me what exactly is the password policy or its a domain password policy is stopping me from creating a dbwadm user.
Thanks in advance
Paritosh

Hi,
Can you confirm me what operating system that you are using. and is it a local installation or domain installation?
regards
Anand.M

Upgrade sequence WAS 640 SP3 unix

Similar Messages

Maybe you are looking for