Upgrade SM 7.0 to EhP1 - Windows service SAP SID _ inst.no does not start

Hi gurus,
I have to upgrade our Solution manager 7.0 (Windows 2003 32-bit, NW 7.0 SP15, Kernel SP185, non-unicode) to the latest SP of EhP1. I downloaded the upgrade and update guides and followed them.
1. Updated to SPAM 700 SP38.
2. Stopped the server and updated the Kernel to 32-bit non-unicode 7.01 SP69.
3. I tried to start the services SAPOSCOL and SAP<SID>_00 and both did not started sayin the application is broken and needs reinstall.
4. I downgraded to Kernel 23-bit non-unicode 7.01 SP55 and tried again - the service SAPOSCOL started but the service SAP<SID>_00 did not.
5. I downgraded to Kernel 23-bit non-unicode 7.01 SP15 and tried again - the same as with SP55.
6. I restored the original Kernel and the server started normally.
The update guide says I first should update SPAM and the Kernel and after that run SAINT to import the EhP1 components selected in MOPZ.
I found a suggestion to run SAINT import before the Kernel upgrade - should I do it?
How can I resolve the problem?
Thanks everyone!
Petar

Thank you Paul!
I finally found [another thread|How to Upgrade kernel 7.0 to 7.01; with similar problem solved by SAP note 684106. It solved my problem too.
I will try to continue update from the current state but will have in mind if something goes wrong your advice. I will write later for the results.
Regards,
Petar

Similar Messages

Service reads data but Bpel process does not start

i have a very simple project. I have db2(as400) adapter and it reads data, i will receive data, transfom and send to oracle database. I deployed the project successfuly but when instance start i see the service reads the data but bpel process does not start and and there is no error. At the flow chart there is only readAS400 partnerlink, there is no bpelprocess. In the partnerlink i am usin polling, i read the data's with 1 and update to 2. It reads but dont update to 2.
In deploy step and when instance starts there is no errors. But when i am deploying i get a warning but i dont know it's related with this situation.
(Warning: property "activationAgent.readAs400.className" may not be understood by BPEL component BPELProcessEqpType - it will likely be ignored.)
Do you have any suggestion ? Thanks in advance.

check the recovery console, the bpel process possibly is going into manual recovery,
Another thing you might wanna try is using checkpoints in your process..
also, instead of getting the db adapter to instantiate the process, try a simpler process just to see if the db adapter is working or not..
A normal process, which you manually instantiate from em console, with the db adapter in it after the recevie activity
Edited by: AshishSharma on Jun 24, 2010 5:48 PM

I recently have installed Windows XP for my computer, but it does not start my Ipod information although I already installed Itunes. What should I do, if I do not have the CD to install it from there?

Hello everyone, I recently installed Windows XP in my computer but now it does not start my Ipod classic information even I just have installed Itunes. What should I do if I do not have my CD to get it from there?

Try using Firefox. Flash usually works on Firefox when it won't on Safari. I noticed that the Safari does not show the same version as Firefox does. Iwonder if that could be the problem. Safari on the left shows 10.1, Firefox show 10.3

I have Windows XP professional installed. Firefox download does not start. I keep clicking on links and icons and I keep going in the circle on your web site.

I have Windows service pak 3 installed. Also IE and AOL.
Step 1. When I click on icon to download Firefox nothing happens so
step 2. I click on link below :"if dowload not starting".
step 3 Then I am redirected to the other page to click on icon that goes to step 1
Full circle for the last week every day tried at least once.
Please help.

You're welcome.
That button doesn't work if you block JavaScript.

Windows 7 64 bit / HPE-010be Computer does not start up out of 'stand-by' mode

I had this problem several times since I bought this system last month.
I leave the PC normally in stand-by and then wake my system up by pushing a key on the keyboard.
In the case of the problem, I push a key on the keyboard, the system starts and I hear the fan and the drive running, but nothin appears on the screen for minutes.
The only way to get out is to force a full restart by pushing the power button for long time.
One thing I had one time that I did not force the full restart but waited for longer time. Half an our later I came back to my system and saw a full restart had happened.
In the log, I see:
Windows Operating System; Versie: 6.1.7600.16385; Id: 41; Gebeurtenisbron: Microsoft-Windows-Kernel-Power;
Msoft relates this log-issue to bad power-off situation, but honestly all the cases I've had I cannot remember issues. It could be that my computer is causing such situations by itselve.
Anyone had this problem? Solutions?
This question was solved.
View Solution.

Patrick,
What BIOS level are you running on your PC? What model NVIDIA video card are you using? If it's the 220 then try this HP NVIDIA video card update.
Try this procedure:
Unplug the PC and open it up.Clean out all the dust. Carefully remove and replace all the cables going to the motherboard one at a time. Do the same for the memory dimms and the video and sound cards if you have any. Plug your PC back in a give it a go.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MD

Hi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support

I've just upgraded my Acer One S1001 to Windows 10 and realized that the sound is not working

Hi everyone! I’ve just upgraded my Acer One S1001 to Windows 10 and realized that the sound is not working. When I went to the support site, I found that there are no drivers for Windows 10 yet!! Only drivers for Windows 8.1 are available. Please provide the drivers for Windows 10, otherwise I’m not able play sound from my machine. Can someone please help? Thanks.

Try to install latest Realtek 2.79 version:http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false#High Definition Audio Codecs

WebAnalysis does not start after workspace is set on Windows Authentication

I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
[WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
It drives me crazy.
Hopefully its a small matter for you to solve!
Thanks in advance.

Dont know exactly whats happened but I presume something went wrong during the update procedure.
If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working!

OracleOraDb10g_home1TNSListener service does not start

I am using Win XP. I have installed Oracle 10g.
OracleOraDb10g_home1TNSListener service does not start. If started manually, it automatically gets stopped.
As result, if I connect to Orcale 10 database through Java, I get Network Adapter error.
what I need to do for OracleOraDb10g_home1TNSListener service to start after clicking 'Start' on it through Services in Control Panel/Admin Tools
Thanks

Oracle installation was successful.
after lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-MAR-2006 23:03
:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=uc-52b3c4f41f58.er
c-wireless.uc.edu)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
Listener failed to start. See the error message(s) above...
After correcting Host in listner.ora, listner started. However before making this change, this service was getting started though listener.ora had wrong host name.
Thanks.

Dbconsole service does not start after renaming Hostname

Hi,
I installed 10g Rel 2 successfully on a Windows XP machine, and then renamed the Computer name (Host name) of the server machine, and now the dbconsole service (for Enterprise manager) does not start up and hence I cannot access the EM through the web browser.
Is there a fixed list of files/directories to rename, if I want to access the Enterprise Manager Console, in such circumstances?
I have already made changes in Tnsnames.ora and listener.ora files. But the service still won't start successfully. It gives a "Service-specific error 2".
Thanks

Hi,
you also check .
etc/hosts -----> file in windos platform.
and edit above file and try to connect and for agent.
start agent manully
cmd>set oracle_sid=<sid>
cmd>emctl start agent
regards
Taj

PIA service does not start

Hi,
my webserver is Weblogic (9.2, Tools 8.49 , HRMS90). PIa service does not start automaticaly when I start/boot the server. I should run startPIA.cmd. And then I can connect in 4/3.
Do you have any idea for that ?
In windows Evenetlog it says Event Type: Warning
Event Source: beasvc
Description:
peoplesoft-PIA service stopped
Thank for help.

after u install PIA , u can start the server from the cmd by issuing a command called StartPIA.cmd ,
or u can tie the domain to a service type called NT service, and schedule the service to be automatic. it keeps running as long as ur box is up. once u reboot it , service stops for a while and start again. this is automatic type of bringing up the server.
ur bEA weblogic when installed sets the path for jdk and jre which are used by the server to come up properly.
even after this if u have trouble, please paste the logs. logs are found under PS_HOME\webserver\domain_name\logs
bea logs are under bea DIR.
Thnks!

Opmn service does not start when try to start Oracle BI Services

Hi ,
I was able to install OBIEE 11g on my laptop and it worked fine for two days. Today when I try to login to rpd and type my user name and password I get the error that my user name and password is not correct. I tried to restart the machine and now I am not able to start opmn service.
When I do Start>Oracle Business Intelligence (1)>Start BI Services, the script run and two command line windows open and about 10 minutes later get the last line that server started in RUNNING mode, but some how Oracle Process Manager (instance) service does not start. It started two days ago when I was able to login to OBIEE 11g.
If I try to go to OBIEE 11g Home page I get this error "Error 500- Internal server error from RFC 2068 Hypertext Transfer Protocol- HTTP/1.1: 10.5.1 500 Internal server error
Any Idea how to fix this one.
Thanks

Maybe you need to tick the "use fully qualified names" check box and make sure that you have the schema object created (as a "folder" between the database and the tables in the physical layer).

Service Station does not start automatically

Good morning,
recently the Toshiba Service Station application does not start when Windows (8.1) starts. If I launch the application manually, it runs normally.
I would like to restore the automatic start of that application. What can I do?

Hi
You can add the application (service station) to the Win 8.1 startup.
Go to the Start screen
Click on the down arrow to show all your applications
Right click on the application you would like to have start automatically.
Select Open file location
This will bring up the location (url) where the program is started
Right click and select Copy
On your computer, from the same Explorer window, go to:
C:\Users\USERNAME\AppData\Roaming\Microsoft\Window s\Start Menu\Programs\Startup
Note: USERNAME must be replaced by the name of the user that is logging in.
Then select Paste Shortcut
After that, the next time you log on, that program will start automatically.

Acrobat Pro X 10.1.10 Does Not Start Windows 8.1

I have Create Suite CS6 which apparently bundles Adobe Acrobat Pro X. I have upgraded to 10.1.10. Under Window 8.1, this version simply does not start. There is no startup screen. There is no error in EventViewer of Windows. It simply does NOTHING.
I went to Windows Program and Features and did a "Repair" on Acrobat Pro X. This redid the install but the result is the same.
Is there a known compatibility issue here? How do I work around this?

Hello,
Have you tried to run the Acrofix patch on your computer?
If not, please follow this link, http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html
Regards,
Yuvraj.

In Windows Vista using outlook 7, iphone 4 does not sync contacts (email & calendar are fine)

In Windows Vista using outlook 7, iphone 4 does not sync contacts (email & calendar are fine) Please Help!

Hello mludwin
Check out the article below to troubleshoot your issue with syncing your Contacts and calendars to your iPhone, using Outlook. It will have some options to reset sync history and disabling any conflicting any Outlook add-ins.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
http://support.apple.com/kb/ts2776
Regards,
-Norm G.

Upgrade SM 7.0 to EhP1 - Windows service SAP SID _ inst.no does not start

Similar Messages

Maybe you are looking for