Upgrade some modules

HI
we need to upgrade just some module of EBS, we would like to know the patches to perform this task.
follow is the module we need to upgrade from 12.0.4 to 12.0.6 :
AP / AR / GL / CASH / IE / IPROC / INV / PO
Regards

Do you mean to say you want to upgrade from 12.0.4 to 12.0.6? If yes, please refer to:
Apps Release 12.0.6 Release Update Pack Now Available
http://blogs.oracle.com/stevenChan/entry/apps_release_1206_release_update_pack_now_avail
For the latest patchsets, please refer to (Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]).
Why you need to upgrade to 12.0.6 and not 12.1.1/12.1.3?
Thanks,
Hussein

Similar Messages

Install error "could not install some modules:"

After I finsihed install I got some errors one was saying somthing exception related to Zip and then after second run I get
Warning - could not install some modules:
Core Modeling Library - The module named com.tomsawyer.module/1 was needed and not found.
Core Modeling Library - The module named org.antlr.module/1 was needed and not found.
I try to reinstall with the option "repair install" and after that I still get the same error.
by the way I installed both jdk and the ide. I have an older jdk still on my computer.

Thanks for response!
To start the Application Server, open a terminal
window
or command prompt and execute the following:
asadmin start-domain --verbose domain1 The comand window starts with C:\documents and settings\administrator, should I firstly change it to C:\ ? and how to change to C:\ ?
Or, on Windows, you can choose
Programs -> Sun Microsystems -> J2EE 1.4 SDK -> Start
Default Server No, in my Programs menue, there's no Sun Microsystems.
Says Starting and Stopping the Application Server
chapter of The J2EE 1.4 Tutorial:
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/
I browsed the tutorial, it doesn't provide such a trouble shooting.
Are you sure that you have application server
installed?Ths install procedure was successfully finished without any error message. Also, I can see J2EE is in my Control Pannel\ Add Remove\Program list.
What should I do? Thanks!
Jenny

SQL Developer will not start - could not install some modules

I just installed the Java JDK 7u51 as well as the JRE 7u51. Following that I extracted SQL Developer to a fresh directory. When I open SQL Developer I get the following error message:
Warning - could not install some modules:
JDeveloper/NetBeans Bridge - The module named oracle.ide was needed and not found.
Extensions Cache - The module named oracle.javaxide was needed and not found.
Extensions Cache - The module named oracle.ide was needed and not found.
Actions Bridge - The module named oracle.javatools was needed and not found.
Actions Bridge - The module named oracle.ide was needed and not found.
Any idea why I'm getting this message? I installed it on my laptop with no problem.

What is the directory structure under you SQLDeveloper directory?
Is should be something like tthe list below. If it isn't something has gone wrong with your extraction.
Directory of D:\progs\sqldeveloper-4.0.0.13.80-no-jre
18/01/2014 11:59 <DIR> .
18/01/2014 11:59 <DIR> ..
14/12/2013 10:41 <DIR> configuration
14/12/2013 10:32 <DIR> dataminer
14/12/2013 10:32 <DIR> dropins
14/12/2013 10:32 <DIR> dvt
14/12/2013 10:32 <DIR> equinox
14/12/2013 10:32 <DIR> external
10/12/2013 13:28 1,404 icon.png
14/12/2013 10:32 <DIR> ide
14/12/2013 10:32 <DIR> javavm
14/12/2013 10:32 <DIR> jdbc
14/12/2013 10:32 <DIR> jdev
14/12/2013 10:32 <DIR> jlib
14/12/2013 10:32 <DIR> jviews
14/12/2013 10:33 <DIR> modules
14/12/2013 10:33 <DIR> netbeans
14/12/2013 10:33 <DIR> rdbms
10/12/2013 13:28 23,580 readme.html
14/12/2013 10:33 <DIR> sleepycat
10/12/2013 13:28 835 sqlcli
10/12/2013 13:28 741 sqlcli.bat
14/12/2013 10:33 <DIR> sqldeveloper
10/12/2013 13:28 82,944 sqldeveloper.exe
10/12/2013 13:28 71 sqldeveloper.sh
14/12/2013 10:33 <DIR> sqlj
14/12/2013 10:33 <DIR> svnkit
03/12/2013 00:30 6,426 view-source-paths.lis

26-suspend2 error: "Some modules failed to unload: nvidia"

I've been trying to install the suspend2 kernel to allow my machine to hibernate, but I can't get it to work from within X (though it seems to work fine in run level 3). When I try, I get:
$ sudo hibernate
Password:
:: Saving ALSA Levels [DONE]
Some modules failed to unload: nvidia
hibernate: Aborting suspend due to errors in ModulesUnloadBlacklist (use --force to override).
:: Restoring ALSA Levels [DONE]
Here is my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Jun 13 18:39:30 PDT 2007
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "dbe"
Load "record"
Load "extmod"
Load "freetype"
Load "type1"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 340 270 # mm
### Comment all HorizSync and VertRefresh values to use DDC:
Identifier "Monitor0"
VendorName "MAG"
ModelName "LT716s"
HorizSync 31.0 - 81.0
VertRefresh 60.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # 
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # 
#Option "FPScale" # [<bool>]
#Option "FPTweak" # 
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
Option "NvAGP" "1"
#ProcSetting extra_pages_allowance 0
Identifier "Card0"
Driver "nvidia"
#Driver "nvidia-suspend2"
VendorName "nVidia Corporation"
BoardName "GeForce 7300 LE"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
Option "AddARGBGLXVisuals" "true"
Option "DisableGLXRootClipping" "true"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
hibernate.conf:
# hibernate.conf is split into separate configuration files.
# Each file is tried in the order below, until an available suspend
# method is found.
# Options specific to a particular suspend method should be placed in the
# appropriate configuration file (suspend2.conf, ususpend.conf, disk.conf
# or ram.conf).
# Options common to all suspend methods should be placed in common.conf.
# See hibernate.conf(5) for help on the configuration items.
TryMethod suspend2.conf
#TryMethod disk.conf
#TryMethod ram.conf
common.conf:
# Configuration options common for suspending to disk or RAM.
# Options are not case sensitive.
# See hibernate.conf(5) for help on the configuration items.
### Some global settings
Verbosity 0
LogFile /var/log/hibernate.log
LogVerbosity 1
# LogTimestamp yes
# AlwaysForce yes
# AlwaysKill yes
# HibernateVT 15
Distribution arch (or debian/fedora/gentoo/mandrake/redhat/slackware/suse)
# XDisplay :0
### Scriptlets
### Scriptlets provide support for doing all sorts of things before and after
### suspending. The defaults settings here should work for most people, but
### you may wish to edit these to taste. Consult "hibernate -h" for help on
### the configuration settings.
### bootsplash
## If you use bootsplash, also enabling SwitchToTextMode is recommended if
## you use X, otherwise you may end up with a garbled X display.
# Bootsplash on
# BootsplashConfig /etc/bootsplash/default/config/bootsplash-1024x768.cfg
### clock
SaveClock restore-only
### devices
# IncompatibleDevices /dev/dsp /dev/video*
### diskcache
# DisableWriteCacheOn /dev/hda
### fbsplash (enable SwitchToTextMode if you use this)
# FBSplash on
# FBSplashTheme suspend2
### filesystems
# Unmount /nfsshare /windows /mnt/sambaserver
# UnmountFSTypes smbfs nfs
# UnmountGraceTime 1
# Mount /windows
### grub
# ChangeGrubMenu yes
# GrubMenuFile /boot/grub/menu.lst
# AlternateGrubMenuFile /boot/grub/menu-suspended.lst
# BackupGrubMenuFile /boot/grub/menu.lst.hibernate.bak
# see http://bugs.debian.org/317479
# RemountXFSBoot yes
### hardware_tweaks
# IbmAcpi yes
# Runi915resolution yes
# FullSpeedCPU yes
### lilo
# EnsureLILOResumes yes
### lock (generally you only want one of the following options)
# LockConsoleAs root
# LockXScreenSaver yes
# LockGnomeScreenSaver yes
# LockKDE yes
# LockXLock yes
# LockXAutoLock yes
### misclaunch
# OnSuspend 20 echo "Good night!"
# OnResume 20 echo "Good morning!"
### modules
# UnloadModules snd_via82cxxx usb-ohci
# UnloadAllModules yes
UnloadBlacklistedModules yes
LoadModules auto
# LoadModulesFromFile /etc/modules
### modules-gentoo
# GentooModulesAutoload yes
### network
# DownInterfaces eth0
# UpInterfaces auto
### pause_audio
# MuteAudio yes
# PauseAudio yes
### pcmcia
# EjectCards yes
### programs
# IncompatiblePrograms xmms
### services
# RestartServices laptop_mode
RestartServices alsa
# StopServices alsasound
# StartServices aumix
### vbetool
# EnableVbetool yes
# RestoreVbeStateFrom /var/lib/vbetool/vbestate
# VbetoolPost yes
# RestoreVCSAData yes
### xhacks
SwitchToTextMode yes
# UseDummyXServer yes
# DummyXServerConfig xorg-dummy.conf
### xstatus
## This can be set to gnome, kde or x:
# XStatus gnome
# XmessageDisable yes
# XSuspendText Preparing to suspend...
# XResumeText Resuming from suspend...
## When using XStatus x, and you have xosd installed:
# XosdSettings --font '-misc-fixed-medium-r-semicondensed--*-120-*-*-c-*-*-*' --colour=Green --shadow 1 --pos bottom --align center --offset 50

So does this mean that ususpend with hibernate-script is somehow broken and that pm-utils must be used?
UPDATE: I just tried it. pm-utils suspends without complaint, and was easy to set up. I still have problems
though, and will post them separately, if I don't find a solution on the wiki.
Last edited by adrian.ratnapala (2009-08-01 16:53:06)

After safari 7.1.3 upgrade some features and links in websites won't work

I upgraded to safari 7.1.3 for mavericks. I have a macbook pro 13". Everything worked fine before, but after the upgrade some features and links in different websites just wont work. what can I do? Also different pop ups like mackeeper keep coming up, and that didn't happen before.

There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
          com.something.daemon.plist
and
           com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
          com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
           something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
            v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

I upgraded some things and Quicktime stopped playing MPEG-2 movies (black screen)!

I upgraded some things and Quicktime stopped playing MPEG-2 movies (black screen)!
I need help, I was ending a project and now it just plays black!
I have quicktime X.
HELP! PLEASE!
thank you.

Quicktime was working fine, I am not sure what Quicktime it was. I upgraded Java, I am not sure if I upgraded Quicktime. After that all quicktime movies with "MPEG-2 Video, Linear PCM, Timecode" codecs started playing black with audio in the background. iMovie was not used. Thank you, I am beyond desperate and I am starting to think no one can help me with this.
Then I am not sure how your created the MPEG-2/PCM MOV files. Files not imported via the MPEG-2 Import codec would normall remain in their long GOP compression format which it not edit compatible in QT based video editors. Those that are imported via the codec to make them edit-compatible then need the codec for proper playback in QT based players/editors.
Since you now say that "Quicktime is working fine," am I to assume that it is After Effects that is playing "black" screen videos and that the files play fine in the QT players? Since you also mention the files are time coded, am I to assume you used FCP or some other app to import the files (which may use the same sort of import workflow) or am I to assume it is the timecode data itself that you feel is now causing the problem. In either case, a Java update may have been a security update that is now causing your current issue by disallowing access to the required playback component for some unknown reason which Apple is unlikely to divulge if it refers to a software security risk.
If problem is general on your system, then do you have a short sample file that you can upload for testing purposes on my Snow Leopard system? At the very least, this may confirm if the problem is general to all updated platforms or local to your individual system and/or user account.

ITunes match has not upgraded some of my tracks to a higher quality! Any ideas please?

iTunes match has not upgraded some of my tracks to a higher quality! Any ideas please?

Hi
Read this user tip Some User Tips (April 2015)
Jim

Kernel upgrade - no module loading

No other way to put it, guys: Arch Linux has just gone completely batshit on me.
I just upgraded to the 2.6.11 kernel, which is now in the Current repo.
However, something seems to have been missed during the update... Because when I boot, my system tells me that finding the module dependencies has failed, hotplug screws up and says that it can't find something (isapnp.map IIRC, or something like that - zoomed by too damn fast and it was too late during boot for dmesg to retrieve), and my modules do not load.
And boy do I mean it when I say I've got no modules... nothing, not even the realtime clock module.
I can't modprobe stuff either. When I do, I get a message saying that the modules dir for kernel 2.6.10 cannot be found.
In other words, it seems that some config file somewhere still says that I'm using kernel 2.6.10, and that's screwing me over completely. So could someone please point me to the config file that gives the kernel modules dir?
As of right now, I'm using a live CD to post here. I'll have to use this until I can get Arch Linux unfucked.
(I ought to post a bug on this... Not registered yet on bugs.archlinux.org though, I'll have to get that done.)
P.S. Don't worry, I'm not angry at the package maintainers... Shit happens, after all.

I had the same problems, new kernel26-scsi, reboot, and a bunch of error messages starting hotplug daemon (line bla error in modules bla file):
[snipp] ...
Mar 16 19:42:10 lemone modprobe: WARNING: /lib/modules/2.6.11.3-ARCH/modules.alias line 1: ignoring bad line starting with '$Mar 16 19:42:10 lemone modprobe: WARNING: /lib/modules/2.6.11.3-ARCH/modules.alias line 2: ignoring bad line starting with '$Mar 16 19:42:10 lemone modprobe: WARNING: /lib/modules/2.6.11.3-ARCH/modules.alias line 3: ignoring bad line starting with '$Mar 16 19:42:10 lemone modprobe: WARNING: /lib/modules/2.6.11.3-ARCH/modules.alias line 4: ignoring bad line starting with '$Mar 16 19:42:10 lemone modprobe: WARNING: /lib/modules/2.6.11.3-ARCH/modules.alias line 5: ignoring bad line starting with '$Mar 16 19:42:10 lemone modprobe: WARNING: /lib/modules/2.6.11.3-ARCH/modules.alias line 6: ignoring bad line starting with '$Mar 16 19:42:10 lemone modprobe: WARNING: /lib/modules/2.6.11.3-ARCH/modules.alias line 7: ignoring bad line starting with '$Mar 16 19:42:10 lemone modprobe: WARNING: /lib/modules/2.6.11.3-ARCH/modules.alias line 8: ignoring bad line starting with '$Mar 16 19:42:10 lemone modprobe: WARNING: /lib/modules/2.6.11.3-ARCH/modules.alias line 9: ignoring bad line starting with '$Mar 16 19:42:10 lemone modprobe: WARNING: /lib/modules/2.6.11.3-ARCH/modules.alias line 10: ignoring bad line starting with $Mar 16 19:42:10 lemone modprobe: WARNING: /lib/modules/2.6.11.3-ARCH/modules.alias line 11: ignoring bad line starting with $Mar 16 19:42:10
[/snapp]
No modules where found, only the ones I had in my modules section of rc.conf. Errm. So I loaded my nic module by hand, started network deamon, and did pacman -Sf kernel26-scsi hotplug. Minutes later, I rebooted, and all things where fine - until I fired up gnome, and found out, I could not start it anymore. But gnome 2.1o is another story.

Upgrading ram modules on dv4-2145dx

Hello I need a little help about upgrading the ram for dv4-2145dx I need to know two things,first I had tried to unscrew the memory plate or cover but so far the cover just doesn't come off and it just does a clicky sound of sorts even though I had unscrew it and hence I can't access or substitute the ram modules.Second which kind of ddr2 memory module can I use with that laptop can it be 667 or 800 or lower.Well that's all my questions anybody who can help me on this issue I will truly preciate it and thanks for your attention have a great day.

I've used the Kingston brand on all my mac (ibook 700mhz G3,1.25DDR, 1.25 DP DDR & G5 DC. So far no problem. I recently purchased matched pair of 1gig (2 gi)DDR2 533mhz @ micro center, coast me $235.00. I was thinking about getting a seperate module. But I remember reading somewhere that for trouble free, better get the matched modules. 1gig x 2 per package = 2 gig or 512 x 2 = 1gig. I rather use brand for less head ache (so far).

ITunes Match and failing to upgrade some of my tracks

Does anyone know why ITunes Match sometimes fails to upgrade certain popular tracks to 256 AAC when it's established that the song/track exists in the Itune store? I just completed the reorganization of my ITunes library today after using iTunes Match to upgrade the compression quality of my songs. And out of approximately 1100 songs, iTunes Match failed to upgrade the compression quality on about a 100 of these tracks. It's not a big deal but I do find it very interesting with popular tracks. As just one example to make my point, Sheryl Crow's 1998 hit My Favorite Mistake was not converted from the current 128 kbps to 256. I could list a number of others that I see in the ITunes Store. And it doesn't make any sense. If the song is in the ITunes store, it should be making a match with the tracks in my library. All of my music meets the minimum compression quality to be eligible for upgrades to 256 AAC under the ITunes Match service. Any thoughts/feedback from anyone? Thanks.

Hi
Read this user tip Some User Tips (April 2015)
Jim

Unable to upgrade some songs to iTunes plus

Hello -
I've seen some other discussions on this topic so I guess it's not an uncommon problem, but I wanted to ask about it anyway in case there are new insights about how to fix it!
I have about 75 old "Protected AAC" songs - 128 bps DRM-protected songs that I purchased before the iTunes Plus era - and I would like to upgrade at least some of them to iTunes Plus (not necessarily all - in some cases I've subsequently bought the CD, or am no longer interested in the song).   When I sign in to the iTunes Store and go to the 'Upgrade to iTunes Plus' section, however, only 40 of the songs are listed (35 are not).   I've verified that in almost all cases, these songs/albums are still available in iTunes - I think perhaps one or two are no longer available, so I can understand why upgrades are not allowed there, but in the vast majority of cases I don't understand why I can't upgrade.
What's really strange is that there are some albums where some songs are available for upgrade and not others. To give a specific example, I purchased 7 songs (all "protected AAC") from the album Travelogue by The Human League (only the 7 bonus tracks, since I have the original album).   Now, 4 of these are available for upgrade to iTunes Plus and 3 are not, even though the whole album (including all 7 songs) are still sold through iTunes.
I tried contacting iTunes support and had an e-mail exchange which was slightly helpful but not entirely; they would never really answer the question and eventually just started repeating the same set of stock paragraphs, leading me to believe that the responses were selected from a menu and were not actually coming from a person trying to solve the problem (maybe I'm wrong about that, I don't know).   Here are the sorts of answers I got:
"The record company remove and then replace some of the songs for their produced albums on the iTunes Store at any time. Since the songs are modified you are not able to see them in the iTunes upgrade page.:
or
"The record company remove and then replace some of the songs for their produced albums on the iTunes Store at any time. Since the mentioned songs have been removed and then fresh copy has been posted you are not able to see them in the iTunes upgrade page."
However, even if the songs have been removed or replaced, I really don't understand why some songs on a given album can be upgraded and others can't!
iTunes Support did kindly credit my account for 5 songs, but in practice I'd like to upgrade about 20.
Has anyone had success working around this problem, or do you know a route to getting iTunes Support to do more?   Or should I just give up and re-purchase the songs I can't upgrade?
Thanks!

Thanks very much....makes sense, but some songs I have used in the past no longer work, so something has changed I guess.

During EHP5 Upgrade some screens for infotypes are deleted

Hi,
During the EHP5 Upgrade, we found some of the screens of infotypes got deleted. Those screen numbers are <9000. Any guessess on why these screens deleted? Is it becoz of SAP reserved namespace or any other reason? What should be best solution to make sure that these screens are not deleted while upgrade?
Regards
Sravan

Dear Sravan,
Regarding this issue i would suggest you to create an OSS message with us with the R/3 connection to the system opened.
Regards,
Abhishek

Is it possible to Partially upgrade some product to R12 and keep rest 11i

Hi All
I was wondering if its possible to upgrade say Financial and procurement modules to r12 and keep rest of modules like Order Management at 11i ?
Or has there been any instance when the above was not possible that a separate box with r12 financial modules have been created and was integrated with 11i modules using custom integration , my feeling is that it may not be possible as both these will require massive effort and will complicate things
Thanks
Rohit
Edited by: 918630 on Mar 4, 2012 6:46 AM
Edited by: 918630 on Mar 4, 2012 6:47 AM

I was wondering if its possible to upgrade say Financial and procurement modules to r12 and keep rest of modules like Order Management at 11i ?No.
Or has there been any instance when the above was not possible that a separate box with r12 financial modules have been created and was integrated with 11i modules using custom integration , my feeling is that it may not be possible as both these will require massive effort and will complicate thingsIt is not possible, you either upgrade all products to R12 or all products remain running on 11i
Thanks,
Hussein

Forum Upgrade - Some Details

Hello all,
the forums have been upgraded to a newer version (Jive Forums 5.5.6).
If you should find any issues, please report them either here or send an email to our support address [email protected].
After the upgrade, the search indexes must be rebuilt. This means, that the search is not working at present and will come back later today.
There are a few changes towards the old version:
1. New editor
By clicking the Save Now button (or automatically every 30 seconds), the current state of your message is saved in the database. So after navigating away from the editor, the message is not gone but can be used at a later stage.
Once such a "draft" is available, you will see its data displayed in a brown box on top of the editor, with two options: Use Draft and Delete Draft. After clicking Use Draft, the text and subject are transferred into the editor and the brown box vanishes. The draft gets deleted from the database then. This also happens when you hit the Delete Draft button. A draft is also deleted when you actually post the message for which the draft was created for.
This feature is forum/thread/message dependent. That means that if you create a draft while creating a new message in forum XYZ, you will have this draft available only when you try to create a new message in the same forum again. The same is valid if you create a draft during a reply: This draft can only be used when you reply to the exact same message again it cant be used when you reply to a different message in the same thread.
If you never use the draft and also dont post the respective message, the draft stays in the database. As a user you have the possibility to delete your own drafts (by navigating to Your Control Panel -> Your Drafts).
Another nice feature is that you can resize the editor: When you look at the bottom right corner of the editor, you see some small diagonal lines (under the editor's scroll bar). When you move the mouse over it, the mouse pointer changes - at this point just hold down the mouse key and drag it down until the editor fits your needs.
2. New Markup Possibilities
Besides the usual bulletin board markup possibilities like , etc., the new Jive version offers more tools. First, there are the tags illustrated in the legend next to the editor.
Furthermore, Jive offers macros that automatically format your message when using tags like these:
- {quote}Hallo{quote} -> marks the text Hallo in italics and with a special background
- {code}System.out.println(Hallo);{code} -> marks the line as programming code
- {size:12}Hallo{size} -> sets font size
- {color:green}Hallo{color} -> sets font color
- {font:Courier}Hallo{font} -> sets font face
There are similar tags where you can use something like {forum:id=40}, which render a complete HTML link to the respective object (with a neat little icon next to it). The object with the given ID must exist. Here are the possibilities:
- {{forum:id=123} -> renders a link to the forum with the forum name as link text.
- The same is valid for {thread:id=328477} and {message:id=123456} (message subject is link text)
- {user:id=867} -> renders a link to the users profile (with the display name as link text)
Often the combination of several markup tags doesnt lead to the desired result, but one of the tags is ignored and displayed as-is, e.g. font formatting within {code} blocks (still) doesnt work.
The filtering of these tags only works in message views, not in search result abstracts and watch emails.
3. Abuse Reporting
With the new Jive version there is a new icon that allows users to report what they consider as abuse. It is a black exclamation point in a yellow rectangle in a post's button bar. Clicking this report icon brings the user to a screen where he has to classify the abuse (General Abuse, Profanity etc.) and is asked to comment on his decision. The report can then be reviewed by our community team.
Regards,
Michael Goeck

Manu Kapur wrote:>
> Forum search not working.
>
> Its giving an error as follows :
>
>
> The specified thread [0] was not found.
>
> This is happening since yesterday.
This also happens to me a lot, and I think it happens when I try to open a thread from the search result list in a new window, not by simply clickin on the link with the left mouse button.
Example:
The link that is presented in the list has the URL
https://forums.sdn.sap.com/click.jspa?searchID=7999960&messageID=4419048
When you open that in a new window, it gets redirected to
Re: Process On Value Request: Read value from other screen field
And then it immediately gets redirected again, to
Re: Process On Value Request: Read value from other screen field?
And that page produces the error. If you simply remove the last "?" in the URL it loads the whole thread correctly - I guess there is some bug in the redirecting code.
Regards
Thomas

[SOLVED] Arch boots 2.6.31 even after 2.6.32 upgrade, without modules

Hello all,
I've upgraded my machine from 2.6.31 to 2.6.32, making sure that kernel26-headers was installed as well.
After rebooting into either the stock or fallback kernel images, 2.6.31 is what boots. The quandary here is that all the 2.6.31 kernel modules have (rightly) been deleted in the upgrading process, leaving my machine without network or LVM support.
I tried manually running mkinitcpio in various modes as described in the Wiki. It reports building a 2.6.32 image, yet 2.6.31 is what always boots up. The mkinitcpio config files all appear to be normal.
For reference, here's the output of "uname -a" on the Fallback image:
Linux trantor 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64 Pentium(R) Dual-Core CPU E5300 @ 2.60GHz GenuineIntel GNU/Linux
This is quite a quandary, and I've pretty much run out of ideas.
pacman -Q kernel26:
kernel26 2.6.32.3-1
pacman -Q kernel26-headers:
kernel26-headers 2.6.32.3-1
I would greatly appreciate any help offered. Thanks!
Last edited by alingo (2010-01-12 06:20:10)

chpln wrote:Another possibility which comes to mind is the kernel image is not being written to the expected partition. If you have used / or are using a separate boot partition, ensure that everything is mounted correctly, reinstall kernel26 if required, and re-run grub-install.
Thanks for the help, but you were a few seconds too late! I just realized the correct solution and fixed it.
Turns out when I installed the machine, I created - and used - a separate /boot partition. I had forgotten about this. Somehow, I either neglected to add it to mount at /boot in /etc/fstab, or I deleted it. While it was not mounted, GRUB was set to use it. This "broken" setup managed to work fine until the minor version number changed and the kernel modules were no longer compatible.
The first hint that there was a mysterious /boot partition was that I, on a whim, deleted the contents of /boot -- and the machine still booted! Once I found the "lost" /boot partition, it was an easy enough fix: Add it to fstab, mount it, and reinstall the kernel packages.
Thanks for helping me! If not for me posting this and awaiting replies, I would not have keep digging away at the mystery with such fervor.

Upgrade some modules

Similar Messages

Maybe you are looking for