Upgrade : SP, Unicode and OS/BD

Hi,
The project consists of applying the sps, convert to unicode and then migrate the version of the OS you BD.
What path can to make this upgrade while respecting the technical constraints?
OS : linux
Bd : oracle
ECC 6.0
Thank you in advance.

Hi,
So you want to upgrade your SPS level, followed by a unicode conversion and then migrate from (linux+ oracle) but to what OS/DB combination?
basically you can migrate from any DB and OS combination to any other with very small restrictions.
Check out this link: System Copy and Migration
If you have any questions please let me know.
Cheers
Vlad

Similar Messages

  • Need Clarification On Unicode and Upgrade-ECC6.0

    Dear All,
    I need some clarification unicode and upgrade . It would be great help if you give your time .
    We had 2 code pages - 1100,1401 in 4.6B system. We had languages - FR,EN,ES,PT and PL. The system has been upgraded to ECC6.0 non-unicode now.
    Now in I18N->System configuration (RSCPINST), only EN is listed. SPUMG asked for activation of I18N to proceed. When the I18N activation was done,  it has knocked out the code page 1401 from TCPDB table.
    Is this normal?
    But, the code pages 1401 is shown as consistent in SCP transaction.
    The system setting has changed to Single code page. Will this affect unicode migration? How did the additonal code page 1401 which was in 4.6B get knocked out
    now? How did the languages ES,FR,PT, IT and PL which were in 4.6B get knocked out of RCPINST?
    We are manually filling the vocabulary since SPUMG is not showing Scanning tabs. The language key in vocabulary is not completely set. The reprocess logs are not completely green. Will this allow unicode migration now? Can we start unicode migration even with this status.
    Regards,
    Santosh
    Edited by: santosh suryavanshi on Nov 18, 2010 11:11 PM
    Edited by: santosh suryavanshi on Nov 18, 2010 11:11 PM

    Hi Santosh,
    SAP ECC 6.0 is not supported with MDMP. This is the reason for the behaviour in RSCPINST.
    The standard way for an upgrade based on start release 4.6B with MDMP would be TU&UC (see SAP note 959698).
    Do you follow this procedure ?
    Best regards,
    Nils Buerckel
    SAP AG

  • ECC 6.0 - Non-Unicode and BI 7.0 - Unicode any known problems?

    We are determing whether or not to do a unicode conversion during our upgrade from BW 3.5 to BI 7.0.  Our R/3 system is non-unicode and my company does not utilize languages other than English and is not expected to at any time in the near future.  This being said we are trying to determine whether or not we should go ahead and do the conversion prior to being forced to by SAP at some point in the future.  I was just hoping I could get some insight into whether there were known issues with running the two versions in conjuction with each other.
    Thanks in advance,
    John

    We have a customer running this scenario, it should be possible to do so. Just keep in mind to do extensive testing as there might be some notes which are not yet in standard ...
    Regards, Kai

  • Question about Unicode and migration 32 -- 64 bit

    Hello
    We are using ECC 5.0 on Windows 32-bit and SQL Server 2000.
    We want to migrate to platform Windows 64 bit. We know the procedure described on note 960769-Windows:Migration from 32-bit to 64-bit.
    We know we can use R3load to do export/import, and we are going to install SQL server 2005 in target server.
    So, with this procedure we will be in ECC 5.0 , Windows 64-bit and SQL server 2005, but the main question is.. how Unicode conversion play here?
    Can we take advantadge of this migration performing Unicode Conversion too?  How? Is Unicode Conversion obligatory here?
    u2026
    Thanks and regards
    Javier

    Hi Javier,
    first of all, your upgrade to SQL Server 2005 64bit could be done without Migration. You just have to upgrade your database and you're done.
    If you would like to migrate to Unicode you could do this by migrating from 32bit to 64bit with R3load. Actually when you want to migrate to Unicode, the you should do it with a small and simple system. Simple means here with single code page or few code pages. If you plan to install new languages which would introduce new code pages, then a Unicode migration should be done before you add the language. Small means, when your system grow significantly, then you should migrate soon. When you started an archiving project, then you probably better wait till this project lead to a smaller system. In other words. The less code pages you have and the smaller your system is, the better it is for your Migration. Downtime will be smaller and the project complexity will be less too.
    Best regards
    Ralph Ganszky

  • SAP Upgrade No-UNICODE to *UNICODE

    Hi all,
    This is our enviroment:
    OS: Windows 2000
    DB: Oracle 9.2.0.7.0
    SAP Kernel 46D
    SAP_BASIS Release: 46B
    <b>NON UNICODE System</b>
    We will go to upgrade our SAP System to:
    SAP R/3 Enterprise Core 4.70 Extension Set 2.00 Support Release 1
    We recieved this <b>upgrade package</b> (Big White Box) from SAP:
    SAP R/3 Enterprise 4.7x2.00 SR1(<b>Incl. UNICODE</b>) not for IDES
    My doubt is:
    <b>*UNCODE</b> does mean that is only for UNICODE Upgrades?
    Should i ask to SAP for a upgrade package like this:
    SAP R/3 Enterprise 4.7x2.00 SR1(<b>Incl. <b>NON</b> UNICODE</b>) not for IDES
    Maybe it only mean that, as an option after the upgrade you <b>could</b> convert your system to unicode, only if you want or need.
    Please some tips!
    Best Regards,
    Desiree Cardenas

    Hi Desiree,
    If you goto www.sap.com/swdc and navigate to
    1. Entry by Application Group
    2. Installations and Upgrades
    3. SAP Application Components
    4. SAP R/3 Enterprise
    5. SAP R/3 Enterprise 47x200
    6. Upgrade
    7. Windows Server
    8. Oracle
    it will show all the DVDs/CDs that may be required for the upgrade.  Since none of the media descriptions actually differentiate between Unicode and Non-Unicode, then I expect the package you received is good for either type of upgrade.
    Than Martens

  • I recently upgraded to ios7 and now my PC is not recognizing my iphone

    I am having several problems.  I recently upgraded to ios7 and now my PC (Windows 7) is not recognizing my iphone.  1) I am getting an error message when itunes opens: "Itunes could not connect to the iphone because it is locked with a passcode. You must enter your passcode on the iphone before it can be used with itunes."  How did it get locked and how do I unlock it without losing my data?  What do they mean by passcode?  I don't have a 4-number code to get into my iphone activated.  In fact, I've never had a passcode.
    2) I cannot download my photos from my iphone onto my computer because my computer doesn't recognize my iphone.  In other words, my iphone does not show up on my computer (no iphone icon, no DCIM folder). 
    3) This is a separate issue but it is also very confusing: I went online to check my iCloud and I cannot see any data (icloud.com).  But I know that I set up iCloud when I upgraded to ios7 and it backs up my data every night. What am I doing wrong, am I unable to see my data and photos?
    Why is this happening?  It was bad enough that when I upgraded to ios7, I lost my Notes - I have no idea why they didn't return.  But now essentially my iphone is not recognized when connected to my computer and this is very frustrating.  I have read numerous previous postings regarding downloading photos onto the PC and regarding this passcode error and cannot find a resolution, so I would appreciate any help.

    No problem!
    This will make it easy for you:
    http://www.tuaw.com/2011/07/09/quicken-wont-run-on-lion-heres-10-mac-apps-to-cur e-those-blue/

  • Recently upgrade to Yosemite and now Apple symbol and install bar displays each time I restart

    Hi guys,
    Hoping someone can help. Recently upgraded to Yosemite and the other day I noticed that when restarting the Apple symbol displayed along with the install bar (just like happens when you upgrade your iPhone). This went on for about 30 seconds before the login screen displayed. This now happens every time I restart. I haven't downloaded and tried to install any files so I am not sure why this keeps happening.
    I am worried it might be malware or similar that is trying to work into the operating system. I have disconnected WiFi and timed the restart to check the logs (although I have no idea what I am looking for). The Apple System Log (ASL) Message log seamed to have a number of fail messages and 'installation' lines so hopefully this will make sense to someone. Below is the log for that 30 seconds of the install.
    27 Oct 2014 8:12:13 pm bootlog[0]: BOOT_TIME 1414401133 0
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.AccountPolicyHelper" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/asl" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.authd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.awdd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.callhistory.asl.conf" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.cloudd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.clouddocs" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.commerce.asl" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.CoreDuetAdmissionControl" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.eventmonitor" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.family.asl" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.ical" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.icloud.FindMyDevice" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.install" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.iokit.power" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.mail" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.MessageTracer" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.networking.symptoms" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.networking.symptoms" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.performance" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.secinitd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm syslogd[17]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    27 Oct 2014 8:12:29 pm kernel[0]: Longterm timer threshold: 1000 ms
    27 Oct 2014 8:12:29 pm kernel[0]: PMAP: PCID enabled
    27 Oct 2014 8:12:29 pm kernel[0]: Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
    27 Oct 2014 8:12:29 pm kernel[0]: vm_page_bootstrap: 1852727 free pages and 228041 wired pages
    27 Oct 2014 8:12:29 pm kernel[0]: kext submap [0xffffff7f80a00000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000a00000]
    27 Oct 2014 8:12:29 pm kernel[0]: zone leak detection enabled
    27 Oct 2014 8:12:29 pm kernel[0]: "vm_compressor_mode" is 4
    27 Oct 2014 8:12:29 pm kernel[0]: multiq scheduler config: deep-drain 0, urgent first 1, depth limit 4, band limit 127, sanity check 0
    27 Oct 2014 8:12:29 pm kernel[0]: standard timeslicing quantum is 10000 us
    27 Oct 2014 8:12:29 pm kernel[0]: standard background quantum is 2500 us
    27 Oct 2014 8:12:29 pm kernel[0]: mig_table_max_displ = 13
    27 Oct 2014 8:12:29 pm kernel[0]: TSC Deadline Timer supported and enabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
    27 Oct 2014 8:12:29 pm kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
    27 Oct 2014 8:12:29 pm kernel[0]: calling mpo_policy_init for TMSafetyNet
    27 Oct 2014 8:12:29 pm kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    27 Oct 2014 8:12:29 pm kernel[0]: calling mpo_policy_init for AMFI
    27 Oct 2014 8:12:29 pm kernel[0]: Security policy loaded: Apple Mobile File Integrity (AMFI)
    27 Oct 2014 8:12:29 pm kernel[0]: calling mpo_policy_init for Sandbox
    27 Oct 2014 8:12:29 pm kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    27 Oct 2014 8:12:29 pm kernel[0]: calling mpo_policy_init for Quarantine
    27 Oct 2014 8:12:29 pm kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    27 Oct 2014 8:12:29 pm kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    27 Oct 2014 8:12:29 pm kernel[0]: The Regents of the University of California. All rights reserved.
    27 Oct 2014 8:12:29 pm kernel[0]: MAC Framework successfully initialized
    27 Oct 2014 8:12:29 pm kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    27 Oct 2014 8:12:29 pm kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2014 00:11:30)
    27 Oct 2014 8:12:29 pm kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:29 pm kernel[0]: ACPI: sleep states S3 S4 S5
    27 Oct 2014 8:12:29 pm kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 159A
    27 Oct 2014 8:12:29 pm kernel[0]: AppleIntelCPUPowerManagement: (built 00:11:36 Sep 19 2014) initialization complete
    27 Oct 2014 8:12:29 pm kernel[0]: pci (build 00:11:20 Sep 19 2014), flags 0xe3000, pfm64 (36 cpu) 0xf80000000, 0x80000000
    27 Oct 2014 8:12:29 pm kernel[0]: [ PCI configuration begin ]
    27 Oct 2014 8:12:29 pm kernel[0]: console relocated to 0xf80010000
    27 Oct 2014 8:12:29 pm kernel[0]: [ PCI configuration end, bridges 12, devices 17 ]
    27 Oct 2014 8:12:29 pm kernel[0]: Thunderbolt runtime power conservation disabled.
    27 Oct 2014 8:12:29 pm kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    27 Oct 2014 8:12:29 pm kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    27 Oct 2014 8:12:29 pm kernel[0]: rooting via boot-uuid from /chosen: 86F7AE8B-06AF-32E7-AF82-3CFDF274A0D2
    27 Oct 2014 8:12:29 pm kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    27 Oct 2014 8:12:29 pm kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    27 Oct 2014 8:12:29 pm kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    27 Oct 2014 8:12:29 pm kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    27 Oct 2014 8:12:29 pm kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    27 Oct 2014 8:12:29 pm kernel[0]: AppleIntelCPUPowerManagementClient: ready
    27 Oct 2014 8:12:29 pm kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 003ee1fffe0c6820; max speed s800.
    27 Oct 2014 8:12:29 pm kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST31000528AS Media/IOGUIDPartitionScheme/Customer@2
    27 Oct 2014 8:12:29 pm kernel[0]: BSD root: disk0s2, major 1, minor 2
    27 Oct 2014 8:12:29 pm kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
    27 Oct 2014 8:12:29 pm kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 7 sc_chainmak 0
    27 Oct 2014 8:12:29 pm kernel[0]: 2.038506: ath_get_caps[4019] tx chainmask mismatch actual 7 sc_chainmak 0
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042249: Atheros: mac 448.3 phy 3205.6 radio 0.0
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042259: Use hw queue 0 for WME_AC_BE traffic
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042267: Use hw queue 1 for WME_AC_BK traffic
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042273: Use hw queue 2 for WME_AC_VI traffic
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042280: Use hw queue 3 for WME_AC_VO traffic
    27 Oct 2014 8:12:29 pm hidd[68]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042287: Use hw queue 8 for CAB traffic
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042293: Use hw queue 9 for beacons
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042371: wlan_vap_create : enter. devhandle=0xfc8fd718, opmode=IEEE80211_M_STA, flags=0x1
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042410: wlan_vap_create : exit. devhandle=0xfc8fd718, opmode=IEEE80211_M_STA, flags=0x1.
    27 Oct 2014 8:12:29 pm kernel[0]: bpfAttach len 88 dlt 127
    27 Oct 2014 8:12:29 pm kernel[0]: bpfAttach len 124 dlt 192
    27 Oct 2014 8:12:29 pm kernel[0]: bpfAttach len 24 dlt 105
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042455: ATH tunables:
    27 Oct 2014 8:12:29 pm kernel[0]: 2.042459:   pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    27 Oct 2014 8:12:29 pm kernel[0]: hfs: mounted Macintosh HD on device root_device
    27 Oct 2014 8:12:29 pm kernel[0]: VM Swap Subsystem is ON
    27 Oct 2014 8:12:29 pm hidd[68]: ____IOHIDSessionScheduleAsync_block_invoke: thread_id=0x105b6d000
    27 Oct 2014 8:12:29 pm hidd[68]: HID Session async scheduling initiated.
    27 Oct 2014 8:12:29 pm hidd[68]: HID Session async root queue running at priority 63 and schedule 2.
    27 Oct 2014 8:12:29 pm hidd[68]: HID Session async scheduling complete.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The ServiceIPC key is no longer respected. Please remove it.
    27 Oct 2014 8:12:29 pm iconservicesagent[37]: iconservicesagent launched.
    27 Oct 2014 8:12:29 pm hidd[68]: Successfully opened the IOHIDSession
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: Unknown key for array: seatbelt-profiles
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The TimeOut key is no longer respected. It never did anything anyway.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: This service is defined to be constantly running and is inherently inefficient.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The TimeOut key is no longer respected. It never did anything anyway.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: ThrottleInterval set to zero. You're not that important. Ignoring.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: ThrottleInterval set to zero. You're not that important. Ignoring.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: ThrottleInterval set to zero. You're not that important. Ignoring.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: This service is defined to be constantly running and is inherently inefficient.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: This service is defined to be constantly running and is inherently inefficient.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    27 Oct 2014 8:12:24 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:29 pm iconservicesagent[37]: Starting service with cache path: /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/com.apple.iconservices
    27 Oct 2014 8:12:29 pm com.apple.SecurityServer[52]: Session 100000 created
    27 Oct 2014 8:12:30 pm kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    27 Oct 2014 8:12:30 pm kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    27 Oct 2014 8:12:30 pm kernel[0]: bpfAttach len 64 dlt 12
    27 Oct 2014 8:12:30 pm watchdogd[30]:  [watchdog_daemon] @(    wd_watchdog_open) - IOIteratorNext failed (kr=0)
    27 Oct 2014 8:12:30 pm watchdogd[30]:  [watchdog_daemon] @(      wd_daemon_init) - could not initialize the hardware watchdog
    27 Oct 2014 8:12:30 pm watchdogd[30]:  [watchdog_daemon] @(                main) - cannot initialize the watchdog service
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: Service only ran for 6 seconds. Pushing respawn out by 4 seconds.
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: The JoinExistingSession key is only available to Application services.
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: The ServiceIPC key is no longer respected. Please remove it.
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:30 pm com.apple.xpc.launchd[1]: This key does not do anything: OnDemand
    27 Oct 2014 8:12:32 pm kernel[0]: IOGraphics flags 0x43
    27 Oct 2014 8:12:32 pm kernel[0]: IOBluetoothUSBDFU::probe
    27 Oct 2014 8:12:32 pm kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0208
    27 Oct 2014 8:12:32 pm kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x9800 ****
    27 Oct 2014 8:12:32 pm kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0x9800 ****
    27 Oct 2014 8:12:32 pm kernel[0]: [IOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x9800
    27 Oct 2014 8:12:32 pm kernel[0]: [IOBluetoothHCIController][start] -- completed
    27 Oct 2014 8:12:32 pm kernel[0]: ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
    27 Oct 2014 8:12:32 pm kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    27 Oct 2014 8:12:32 pm kernel[0]: **** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0xba80 -- 0xe800 -- 0x9800 ****
    27 Oct 2014 8:12:32 pm kernel[0]: Previous shutdown cause: 5
    27 Oct 2014 8:12:32 pm kernel[0]: DSMOS has arrived
    27 Oct 2014 8:12:32 pm hidd[68]: IOHIDService compatibility thread running at priority 63 and schedule 2.
    27 Oct 2014 8:12:32 pm com.apple.usbmuxd[51]: usbmuxd-344.3 on Oct 13 2014 at 21:10:09, running 64 bit
    27 Oct 2014 8:12:32 pm opendirectoryd[45]: BUG in libdispatch: 14A389 - 2004 - 0x5
    27 Oct 2014 8:12:32 pm iconservicesd[36]: iconservicesd launched.
    27 Oct 2014 8:12:32 pm iconservicesd[36]: Cache path: /Library/Caches/com.apple.iconservices.store
    27 Oct 2014 8:12:33 pm configd[25]: preference: no sharing preferences
    27 Oct 2014 8:12:34 pm com.apple.SecurityServer[52]: Entering service
    27 Oct 2014 8:12:34 pm loginwindow[64]: Login Window Application Started
    27 Oct 2014 8:12:34 pm com.apple.xpc.launchd[1]: Service "com.apple.ManagedClient.startup" tried to hijack endpoint "com.apple.ManagedClient.agent" from owner: com.apple.ManagedClient
    27 Oct 2014 8:12:34 pm UserEventAgent[16]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    27 Oct 2014 8:12:34 pm digest-service[95]: label: default
    27 Oct 2014 8:12:34 pm digest-service[95]:           dbname: od:/Local/Default
    27 Oct 2014 8:12:34 pm digest-service[95]:           mkey_file: /var/db/krb5kdc/m-key
    27 Oct 2014 8:12:34 pm digest-service[95]:           acl_file: /var/db/krb5kdc/kadmind.acl
    27 Oct 2014 8:12:34 pm thermald[22]: Waiting for OSTT support notification
    27 Oct 2014 8:12:34 pm WindowServer[112]: Server is starting up
    27 Oct 2014 8:12:34 pm UserEventAgent[16]: Captive: CNPluginHandler en1: Inactive
    27 Oct 2014 8:12:35 pm digest-service[95]: digest-request: uid=0
    27 Oct 2014 8:12:35 pm secinitd[114]: UID[0]: cache loaded: /System/Library/Caches/com.apple.app-sandbox-cache.plist
    27 Oct 2014 8:12:35 pm secinitd[114]: ctkd[113]: unable to get root path for bundle of main executable: /System/Library/Frameworks/CryptoTokenKit.framework/ctkd
    27 Oct 2014 8:12:35 pm locationd[54]: Logging binary sensor data to /var/folders/zz/zyxvpxvq6csfxvn_n00000sm00006d/C/locationdSensors.bin
    27 Oct 2014 8:12:35 pm locationd[54]: NBB-Could not get UDID for stable refill timing, falling back on random
    27 Oct 2014 8:12:35 pm locationd[54]: Location icon should now be in state 'Inactive'
    27 Oct 2014 8:12:35 pm configd[25]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en0) failed: Network is down (50)
    27 Oct 2014 8:12:35 pm configd[25]: DHCP en0: INIT transmit failed
    27 Oct 2014 8:12:35 pm com.apple.xpc.launchd[1]: The JoinExistingSession key is only available to Application services.
    27 Oct 2014 8:12:35 pm kernel[0]: bpfAttach len 124 dlt 192
    27 Oct 2014 8:12:35 pm kernel[0]: bpfAttach len 88 dlt 127
    27 Oct 2014 8:12:35 pm kernel[0]: bpfAttach len 24 dlt 105
    27 Oct 2014 8:12:35 pm kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    27 Oct 2014 8:12:35 pm kernel[0]: en1::IO80211Interface::postMessage bssid changed
    27 Oct 2014 8:12:35 pm configd[25]: dhcp_arp_router: en1 SSID unavailable
    27 Oct 2014 8:12:35 pm configd[25]: setting hostname to "Lukes-iMac.local"
    27 Oct 2014 8:12:35 pm configd[25]: network changed.
    27 Oct 2014 8:12:35 pm digest-service[95]: digest-request: netr probe 0
    27 Oct 2014 8:12:35 pm digest-service[95]: digest-request: init request
    27 Oct 2014 8:12:35 pm digest-service[95]: digest-request: init return domain: BUILTIN server: LUKES-IMAC indomain was: <NULL>
    27 Oct 2014 8:12:36 pm mdmclient[40]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    27 Oct 2014 8:12:36 pm com.apple.xpc.launchd[1]: The JoinExistingSession key is only available to Application services.
    27 Oct 2014 8:12:36 pm com.apple.xpc.launchd[1]: The _DirtyJetsamMemoryLimit key is not available on this platform.
    27 Oct 2014 8:12:36 pm com.apple.xpc.launchd[1]: The _DirtyJetsamMemoryLimit key is not available on this platform.
    27 Oct 2014 8:12:36 pm UserEventAgent[16]: nsurlsessiond_events plugin: adding token 1 for client softwareupdate_download_service
    27 Oct 2014 8:12:36 pm networkd[130]: networkd-411 pid 130
    27 Oct 2014 8:12:36 pm apsd[49]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    27 Oct 2014 8:12:36 pm systemkeychain[132]: done file: /var/run/systemkeychaincheck.done
    27 Oct 2014 8:12:36 pm apsd[49]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name
    27 Oct 2014 8:12:36 pm apsd[49]: Attempt to set push wake topics without dark wake enabled: ()
    27 Oct 2014 8:12:36 pm apsd[49]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name
    27 Oct 2014 8:12:36 pm apsd[49]: <APSConnectionServer: 0x7fa5796183e0> Invalid mach port - Cleaning up this named port's topics. com.apple.askpermission.aps
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic Sockets GetProcessNameFromSocket() failed errno[57] err[-1]
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic Sockets Unknown(-1), errno 0 UDS FD=3
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic Sockets UDS FD=3 ERROR: failed to get effective user ID, errno 0
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic SleepProxy BSP Server Disabled. Metric = 3373
    27 Oct 2014 8:12:36 pm discoveryd[48]: AwdlD2d AwdlD2dInitialize: Initialized
    27 Oct 2014 8:12:36 pm discoveryd[48]: D2D_IPC: Loaded
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic WABServer NetResolverEvent no resolvers, resetting domains
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic DNSResolver etc/hosts file changed: Event 0x7f86a0d06700 Flushed /etc/hosts cache
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic RemoteControl com.apple.discoveryd Starting XPC Server
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic SleepProxy Could not get the primary interface
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic RemoteControl com.apple.discoveryd.dnsproxy Starting XPC Server
    27 Oct 2014 8:12:36 pm discoveryd[48]: Basic SleepProxy Sleep Proxy Server is not enabled
    27 Oct 2014 8:12:36 pm discoveryd_helper[145]: Basic RemoteControl com.apple.discoveryd_helper Starting XPC Server
    27 Oct 2014 8:12:36 pm discoveryd_helper[145]: Detailed RemoteControl com.apple.discoveryd_helper XPC connection 0x7fac7bf00400: start (pid=48, <unknown> not root)
    27 Oct 2014 8:12:36 pm configd[25]: network changed.
    27 Oct 2014 8:12:36 pm kernel[0]: AppleBCM5701Ethernet [en0]:        1        0 load_batch_arp_firmware: invalid firmware signature
    27 Oct 2014 8:12:37 pm kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
    27 Oct 2014 8:12:37 pm kernel[0]: AtherosNewma40P2PInterface::init <p2p> role 1
    27 Oct 2014 8:12:37 pm airportd[29]: airportdProcessDLILEvent: en1 attached (up)
    27 Oct 2014 8:12:37 pm discoveryd[48]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
    27 Oct 2014 8:12:37 pm discoveryd[48]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
    27 Oct 2014 8:12:37 pm mds[32]: (FMW.Normal:1402) FMW 0 0
    27 Oct 2014 8:12:37 pm discoveryd[48]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
    27 Oct 2014 8:12:38 pm discoveryd[48]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
    27 Oct 2014 8:12:38 pm discoveryd[48]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
    27 Oct 2014 8:12:38 pm kernel[0]: 26.885109: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
    27 Oct 2014 8:12:38 pm kernel[0]: 26.885132: switchVap from 1 to 1
    27 Oct 2014 8:12:38 pm discoveryd[48]: Basic Bonjour stop listening on en1
    27 Oct 2014 8:12:40 pm lsregister[147]: LaunchServices: Begin database seeding
    27 Oct 2014 8:12:40 pm lsregister[147]: LaunchServices: Completed database seeding
    27 Oct 2014 8:12:41 pm kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6740
    27 Oct 2014 8:12:41 pm WindowServer[112]: Session 257 retained (2 references)
    27 Oct 2014 8:12:41 pm WindowServer[112]: Session 257 released (1 references)
    27 Oct 2014 8:12:41 pm kernel[0]: en2: promiscuous mode enable succeeded
    27 Oct 2014 8:12:41 pm kernel[0]: en3: promiscuous mode enable succeeded
    27 Oct 2014 8:12:41 pm WindowServer[112]: Session 257 retained (2 references)
    27 Oct 2014 8:12:41 pm WindowServer[112]: init_page_flip: page flip mode is on
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 26 modes for display 0x00000000 [26, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: mux_initialize: Couldn't find any matches
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 26 modes for display 0x00000000 [26, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: Found 1 modes for display 0x00000000 [1, 0]
    27 Oct 2014 8:12:41 pm WindowServer[112]: WSMachineUsesNewStyleMirroring: false

    Hi Blotontheland,
    Thanks for the prompt reply. The interesting thing is that my Macbook Pro was upgraded today to Yosemite and I still have the spinning wheel on the start up screen before the login page comes up.

  • I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

    i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
    When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
    Please HELP!!!!!! Getting second thoughts on Lion!!!!

    Hi b,
    Have you restarted yet?

  • I have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules

    i have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules. i am from turkey.

    Welcome to Apple Support Communities
    The Mid 2011 Mac mini supports 8 GB of memory officially, but you can install up to 16 GB of RAM, so you can use 2, 4 and 8 GB modules. You can buy more RAM from OWC or Crucial.
    If you are looking for memory at a local shop, make sure you buy 1333 MHz DDR3 memory. See > http://support.apple.com/kb/HT4432?viewlocale=en_US&locale=en_US

  • I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics. Is it possible to upgrade the RAM and the graphics card?

    I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics card. Is it possible to upgrade the RAM and the graphics card?

    The RAM can be upgraded as indicated below. The Graphics card can not be upgraded.
    Maximum Memory
    6.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

  • PURCHASE PROGRAM  When I filled in my credit card details and proceed to Step 4: Enter your payment information, so nothing happens. Have tried several times. This order applies to the upgrade of CS4 and costs 270,60SEK per month.  Does not this offer?  M

    PURCHASE PROGRAM
    When I filled in my credit card details and proceed to Step 4: Enter your payment information, so nothing happens. Have tried several times. This order applies to the upgrade of CS4 and costs 270,60SEK per month.
    Does not this offer?
    Micke at Raa

    Some general information... your Adobe account and your credit card details must match exactly
    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
    -Credit card https://helpx.adobe.com/utilities/credit-card.html
    -ID support http://helpx.adobe.com/x-productkb/global/service-c1.html
    -verify email https://forums.adobe.com/thread/1446019

  • I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

    I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

    We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Can't open Pages '09 Document (Upgraded to Mavericks and Pages 5.0))

    There is one Pages '09 file that I can not open now that I have upgraded to Mavericks and the new Pages.  Of course it is an assignment that my son needs for school!  When I double-click on it I get the message that the document could not be read, that it does not have a valid format.  I tried opening it with the 4.3 version of Pages, but get the same result.  I also tried to pull the document from the time machine, and same problem.
    Any suggestions/work-arounds?  I tried simply renaming the file format--no luck.  Do I need to repair permissions? 
    I am on a 3-week old iMac 2.7 GHz Intel Core i5 with 8GB 1600 MHz DDr3, 1GB old school drive.
    Jim

    Maybe try what was suggested here:
    https://discussions.apple.com/thread/5466954?tstart=0
    "I had this problem with both pages and numbers so I closed all the background apps did a reset by holding down the home and power buttons and now they both work."

  • For weeks I have been viewing a doggy day care via their web cam.  This weekend I upgraded to Lion and have been unable to view the center since.  I get an error message for java webcam class not found.  All of my software is up to date--suggestions?

    For weeks I have been viewing a doggy day care center via their web cam.  This weekend I upgraded to Lion and have been unable to view the center.  I get an error message for Java plug-in 1.6.0_29 ....webcam class not found.  Any suggestions on how to fix this?

    Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
    BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
    Regards.

  • Setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove

    setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove

    Hi marsano,
    Usually the only reason it will ask you to reboot is if there is a file that must be modified that the updater doesn't currently have access to. You should try running the Firefox program once as Administrator:
    * Right-click the icon and choose ''Run as Administrator''
    If that doesn't help then do a clean reinstall.
    # Download a fresh copy of Firefox from the [http://www.mozilla.org/firefox/fx/ Mozilla download page] and save the file to the desktop.
    # [[Uninstalling Firefox|Uninstall]] your current version of Firefox and remove the Firefox program folder before running the new installer.
    # Run installer
    Remember that you don't want to remove personal data when uninstalling. That way you'll still have your personal information.
    Hopefully this helps!

Maybe you are looking for

  • Help with table scan

    I have a problem with full table scans that make very slow the performance of a report. The test case is below. It looks that when the column is called from the table, the index is in use. If I use the same select from the view, then I get a table sc

  • Facebook app unable to load friends list

    Hello everyone. About 3 days ago my facebook app stopped loading my friends list. I get a message saying "your friends list is unavailable". Because of this, I've been unable to post on someones wall, send a msg, or poke. The only thing I can do is u

  • How do I get Firefox to automatically open to my igHome page

    iGoogle is going away. I chose and registered for igHome to be my replacement. I want that homepage to open whenever I click on the Firefox symbol. How do I make that happen? Please be detailed in your answer. I'm not a computer geek! I have tried to

  • Add a parameter in an ALV screen

    Hi, I'd like to add a parameter in the screen of an ALV GRID (I use REUSE_ALV_GRID_DISPLAY NOT OO ALV): the target is having the alv grid  and this parameter in the same screen, so when I give a particular user command, I can read the input of the pa

  • A Way To Invert A Clipping Mask?

    Hey all.  Can this be done - inverting a clipping mask? Basically, when you clip an image, the outside junk gets hidden.  I would like the reverse effect where the inside stuff is hidden.  Any way to do this? And another question: is there a way to c