Upgrade SRM4 or build SRM7 from scratch?

Dear friends,
We use SRM4 SAPKIBKS08
Our backend is ECC6 and we use extended classic scenario.
What are the advantages and disadvantages of each option?
u2022 Upgrade the current SRM4 system to SRM7
u2022 Build a new SRM7 system and then migrate the data from the SRM4?
Thanks in advance
Zion Yazdi

Hi,
Normally any company if SRM is already implemented 99% percent they go for upgrade only because there are lot of Zee programme will be developed in the system..
if the company has new requirements in addition to the existing they can add to the new requirement.
SRM 4.0.
if your client are having the following scenario eg.-SRM 4.0
1. Self service procurement with CCM.
2.Contract Management.
3. Service Procurement.
they can upgrade with the same features in SRM 7.0
In addition
In SRM 7.0 - New Scenario -Procurement for Public sector is there which is new -Double cover tendering process which is not in earlier version.
In SRM 7.0 they are lot of features in Service procurement.
So better go for an upgrade ADDITIONAL SCENARIO can be added which will save time and cost.
In new implemenation for SRM7.0 if there are around say 100 z programs are there. you have write the same 100 Z program in SRM 7.0 server I believe which is waste and lot of time and cost is involved.
We are upgrading from SRM 3.0 to SRM 7.0 --It is a two step upgrade.
1. SRM 3.0 to SRM 5.0
2. SRM 5.0 to SRM 7.0
We are in the process..
In your case you can upgrade from SRM 4.0 to SRM 7. 0directly.
Again it depends on the Client to go for Upgrade (or) New Implementation.
Regards
Ganesh Kumar .G

Similar Messages

How do I keep the IntelliSense cached onto my hard drive, so that whenever I restart Visual Studio, it doesn't need to re-build IntelliSense from scratch?

Opening a project solution means that I start from where I last left off. If IntelliSense is able to keep its database files, then whenever I call on IntelliSense, it can just go and fetch whatever I typed as any normal operating IntelliSense would do.
I was just wondering if there is a way to preserve already-built IntelliSense database, so that when I open my Visual Studio project, it doesn't need to generate the IntelliSense database files and I can just call IntelliSense without needing to worry about
waiting for it to finish generating necessary files.

No, I do not mean IntelliSense code snippets. What I mean is the PDB database the IntelliSense generates when scanning through codes that the project has. I need to mention beforehand that I have honestly no idea if the PDB file IntelliSense generates is
related to this.
This is what I mean:
What IntelliSense does is it caches all available C++ functions it gathered from the project, and then store them into some database file (which I call it PDB, because it sounds like it's a database file containing all of this auto-completion information),
so that whenever I call on IntelliSense for auto-completion, it pops up this widget showing all of this for me.
I wanted to be able to store this generated file permanently, so it doesn't get called over so many times.
I understand that there is an option to disable auto-updating in the Options > Programming Languages > C++ > Advanced > IntelliSense category. I have that ticked off already, but IntelliSense still generates over and over again each time
I do a build.
It makes sense to generate a new PDB for new/removed codes I did in the project, and I can agree, but it
doesn't make sense to have that same PDB file be generated again and again when all I am doing is just building the same code, without modifying the source code at all, like pressing multiple CTRL+SHIFT+B and closing the program over
and over again. That behavior is what I would call the PDB file a "cached" file. And I want to keep it when I am building, so that IntelliSense doesn't have to rebuild all the time after I finished a build/compile session and I have to wait a long
while for me to see what functions I need to use in the project.
Or maybe there could be a "Search function in IntelliSense context menu...", but I digress.

Error upgrading windows 10 build 10049 from 10041 error 0x80070012

i don't know how i can fix this error. i got the same error when trying to fix the store beta issue with mail, calendar and people apps.
ps sorry for my English.

Follow this method which is posted in Insider Hub :
In this build, the Mail, Calendar, and People apps may be broken due to a licensing issue with the Store Beta. To get these apps working again, you need to follow these steps:
Open powershell as administrator
Run the command Get-appxprovisionedpackage –online | where-object {$_.packagename –like “*windowscommunicationsapps*”} | remove-appxprovisionedpackage –online
Re-install Mail, People and Calendar from the Store (green tile)

How can I transfer a site that was made in iWeb to a new web design service? Please tell me I don't have to build again from scratch!!

I have a site that I update for a large group of educators. It has years of info and pages and it was all created in iWeb. It's a great site and people rely on it! I found out that iWeb is going away and I need to find a way to keep updating this site asap. Help!!
PS: IMO Apple should be making a web design app that supports the continuation of sites built in iWeb AND has the ability to update them with all the design features that they claim iWeb isn't equipped to handle instead of throwing us all out on the street. If this does exist, and I don't know it, please, someone tell me!

You don't need to upgrade to Mt Lion to use iWeb 3. It works fine in Lion and Mt Lion. Read the following for use if iWeb in Lion and Mt Lion.
In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Build website from scratch tutorial.

How do you pause the tutorial?

Hold the mouse over the video pane and the status bar appears at the bottom of the video pane allowing to pause and resume the video.

Building report from PL/SQL cursor

Hello,
is there any way to build APEX report using just PL/SQL cursor?
I don't have grant to SELECT from views or tables, but I can use some functions returning row types and cursors. I know I can use them to build table from scratch with htp.p etc., but it’s not very nice. I want to do it using APEX reporting with filtering and pagination functionality.
Is it possible?
Regards,
Przemek

Apologies for the delay, I was out of the office.
Below is a package serving as the basis for creating a view based on a pipelined function. The package is just a skeleton and will not compile in its current form, you will need to go through it filling in the blanks as described by the comments.
If you want some control over what rows are returned by the view from a larger result set, use the set_parameters function in the WHERE clause, E.G.:
select * from really_big_complicated_slow_view where 1 = view_pkg.set_parameters(something_that_reduces_the_view_result_set_size);
Or, a more concrete example:
select result_text from view_to_convert_to_csv where 1 = view_pkg.set_parameters(pi_table => 'my_table', pi_where = 'whatever');
In the spirit of full disclosure, I got the idea for using the "set_parameters" function in the view WHERE clause from a post or blog somewhere a couple of years ago but have lost track of who actually deserves the credit for the good idea.
-Tom
create or replace package demo_vw as
-- Package to serve as the basis for a view based on a function
-- Customize this record so that it represents a row from this view...
type row_type is record (
-- record fields here
type table_type is table of row_type;
-- This function is used in the DDL to define the view, for example:
-- create or replace view my_view (col1, col2, ..., colN) as
-- select * from table(my_view_vw.get_view);
function get_view
return table_type
pipelined;
-- Customize this function header to accept the parameters for this view, if
-- any. If this view does not require any parameters, the set_parameters
-- function may be deleted.
-- This function should always return 1 and is called as follows
-- select <whatever>
-- from my_view
-- where 1 = my_view_vw.set_parameters(p1, p2, p3, ..., pN);
function set_parameters (pi_whatever1 in whatever,
pi_whateverN in whatever)
return number;
end demo_vw;
show error package demo_vw
create or replace package body demo_vw as
-- Customize this list of private global variables to match the parameters
-- required by the view. These variables are set, reset, and validated by
-- set_parameters, reset_parameters, and valid_parameters respectively...
g_var1 whatever;
g_varN whatever;
function set_parameters (pi_whatever1 in whatever,
pi_whateverN in whatever)
return number
is
-- Customize this function header to accept the parameters for this view, if
-- any. If this view does not require any parameters, the set_parameters
-- function may be deleted.
-- This function should always return 1 and is called as follows
-- select col1, col2, ..., colN
-- from my_view
-- where 1 = my_view_vw.set_parameters(p1, p2, p3, ..., pN);
begin
g_var1 := pi_whatever1;
g_varN := pi_whateverN;
return 1;
end set_parameters;
function valid_parameters
return boolean
is
-- Customize...
-- Assumes that set_parameters has been called to set the value of the view
-- parameters.
l_valid boolean := true;
begin
return l_valid;
end valid_parameters;
procedure reset_parameters
is
-- Customize...
-- This is called at the end of the get_view function to reset the view
-- parameters for the next caller.
begin
g_var1 := null;
g_varN := null;
end reset_parameters;
function get_view
return table_type
pipelined
is
-- build and return each row for the view...
l_row row_type;
begin
if valid_parameters then
-- do your process to populate the l_row variable here...
pipe row (l_row);
end if;
reset_parameters;
exception
when others then
reset_parameters;
raise;
end get_view;
end demo_vw;
show error package body demo_vw
create or replace view demo
as
select * from table(demo_vw.get_view);

Design From Scratch or Use Template - Pros & Cons

From another post ...
DParsons said, "… this reconfirmes a conclusion that I had come to. It is far easier to create a template from an existing one than to try building one from scratch." *
I think a great advantage of creating a book design from scratch (within iBooks Author) is defining your own styles and not being bogged down or confused by pre-established styles. Additionally, defining the master layouts is easier. What do you think? - Fabe
* Thanks to DPrsons for making me think about this.

Depending upon Business, if your Business Users or any end user wants to Access the Portal from their workstation without logging into VPN and they are no in Intra network, you could plan the External Facing Portal .
Technically Homepage can be hit by any user but if they are making Purchases, Applying for Jobs they can register an Account on the POrtal and the Account will be stored in HR or E-Recruiting.
Security, User Interlace and Session Handling are the key areas during Design.
Thanks
SM

Quality setup from scratch

HI ,
In our org Quality land scape is to build again from scratch and It came to me as in Opreration
Can every body guid me what are the steps to configure
1. ALE confriguation
2. Master migration from production to quality, With T-Code
3. What are other precaution
Rg Ajit

Hi,
The ALE Configuration steps are:
->Creation of a Logical system
-> Assignment of the client to the system
->Creation of RFC Destination(SM59)
->Creation of a Partner(WE20)
->Creation of Port(WE21)
->Distribution Model(BD64)
Thanks
Krithika

C#: Building a SOFTWARE SOLUTION from scratch to finish

Hello good people of MSDN. I have a VERY SIMPLE REQUEST... (Here goes)
I'm trying to build an Application (from scratch, custom specs) that allows the user to manage, organize and keep track of books that are available in a library. This system is to be made use of in environments such as personal library, public library, any
situation that requires/involves the constant movement of BOOKS.
Now, I have presented a solution to the client which works OKAY but there has been a SUDDEN CHANGE of heart, now the client wants the solution to be implemented quite differently. The solution that I BUILT is basically an ASP.NET C# Application that runs LOCALLY
so it opens up in the browser (IIS installed and all that) for the user to make use of the Application. Now when I want to have the entire Application to FUNCTION on another system I simply copy the Database, the Application folder (that has all the files
in it) place it in the IIS Directory... ... (So as not to waste your PRECIOUS TIME). To access the Application we simply open up the BROWSER enter localhost/the Application's URL...
The client, first of all does NOT want the BROWSER in the mix of things (ANYMORE !!!); secondly, does not want to have to go through all of this process of COPYING FILES INTO LOCATIONS, IIS etc etc in order to get the solution to WORK/OPERATE on another/several
other computers. The client wants to be able to have an EXECUTABLE INSTALLATION file that when clicked installs a SOFTWARE APPLICATION that opens up in its own WINDOW ENVIRONMENT without the help/assistance of the BROWSER !
This is my PREDICAMENT there's NO TIME... I need to AT LEAST present a working prototype in less than 24hrs!
So my questions are:
1.) Is there anyway for me to convert my ASP.NET C# Web Application into an installable client software without losing any of the components that make it work?
2.) If I have to build the ENTIRE Application into a WinForms PROJECT (I'm using VS 2010) can I STILL MAKE USE of the DATABASE I used for the ASP.NET C# Application?
3.) I don't want to have to DUMP my SQL SERVER DATABASE (as it is) to start creating a DB using something else like MS Access. Do I have a choice?
I have included with this post a Notepad doc that details the sketch of what I am HOPING to ACHIEVE. I would Appreciate it if anyone can (KINDLY) take it up and create according to the SPECIFICATIONS included in the doc. I have tried to be very DETAILED and
DESCRIPTIVE in the doc to make it easy for the DEVELOPER to FOLLOW THROUGH. Can it be done?
(If ANYONE can take it up and provide the solution it would be a good thing because it would ALWAYS be available to other DEVELOPERS who can read through the CODE and become better C# PROGRAMMERS and better at using Visual Studio. As this is a VERY REAL
LIFE SCENARIO coders can LEARN from the SITUATION).
At the end of the whole CODING PROCESS I intend to BUILD the Source to become a SINGLE EXECUTABLE FILE that will INSTALL the Application on the clients system. If anyone can PROFFER (and MAYBE RENDER) a SOLUTION that's ACCURATE, SPEEDY, RELIABLE to me, I would
be grateful!
The Software is to be used in a school. Students are only going to REQUEST for books, RETURN the books that they collected. They are NOT BUYING books!
Working/Functional Prototype
(The PROTOTYPE I hope to present REALLY SOON should be CAPABLE of the FOLLOWING)
1. Navigate/Move through the different Forms/GUI Screens when the appropriate buttons are clicked
2. Interact with the DB (to some extent) and carry out (for now)TRANSACTIONS like adding books, viewing list of books, delete book, Register Student (other DB operations can be included much later)
3. When the Application is LAUNCHED a Splash Screen is displayed introducing the Application (while the Application is loading), then when it's done Loading, the Application opens to present the Start Screen
4. An EXECUTABLE INSTALLATION FILE that can be used to conveniently INSTALL the Application on multiple systems... Just in-case it is to be installed on a computer system that's not Windows OS, I'd like for it to carter to dependencies appropriately.
PLEASE ANYONE that chooses to ASSIST (based on the SPECIFICATIONS) should KINDLY include the DETAILS of how the result was ACHIEVED so at least I can read through and understand the Application and conveniently make suitable/any necessary modifications (should
the CLIENT require that I do so). eg Step by step instructions on how to get the whole SOURCE CODE into INSTALLATION FILE, Setting up the Splash Screen, how the DB is made to connect to the front end GUI (eg ODBC, OLE DB that type of stuff)... etc etc
I'm trying to keep the prototype VERY SIMPLE so I can ACHIEVE something TANGIBLE in this short space of time then LATER any SOPHISTICATION can be included.
PS: I have done MY VERY BEST to plan out the Application Logic. So it should be easy to just READ over the Notepad docs I'm including here... As a pointer (should YOU decide to ASSIST) it would be FASTER to START with the WinForms, then MOVE to CREATING
the DB, afterwards LINK THEM...
Thank YOU ALL.
BELOW IS INFO ABOUT THE DATABASE STRUCTURE *
BookStore Database (Tables)
Books
Students
UsersRequest
BooksReturned
Information and instructions about the diff tables in the database
Books: this holds information about all the books available in the store
Students: this holds info about the students that come in to request for books
UsersRequest: for the admin to see at one glance requests from every student
BooksReturned: for the admin to look at info about the different books returned by the students.
Books table (attributes/colomns)
BookTitle
Author
Edition
ISBN
CategoryName
Students table (attributes/columns)
reg no
FName
LName
MName
UsersRequest table (attributes/columns)
reg no
FName
LName
BookTitle
Author
Edition
ISBN
CategoryName
BooksReturned (attributes/columns)
reg no
FName
LName
BookTitle
Author
Edition
ISBN
CategoryName
INTERPRETATIONS OF DB COLUMN NAMES
FName = First Name of the student
LName = Last Name of the student
reg no = Registration Number of the student at the school
Author = The authorn of a book
Edition = EG 1st Edition, 2nd Edition that kinda thing
ISBN = The Standard Book Number of the book
CategoryName = EG Computer Science, Applied Robotics
BELOW IS WINFORMS PLAN: FRONT END
There are just gonna be 5 GUI Components (FOR NOW). The ENTIRE APPLICATION WINDOWS should be in the range 700px by 700px (width by height).
Forms/GUI Instances
1. Start/Welcome Screen
2. List of books
3. Administration
4. Relase Notes
5. Splash screen
Start/Welcome Screen
When the Software Application is launched and the Software is done loading this is the FIRST screen that the user sees. This Screen presents the users with options to carry out certain actions. Also it presents some brief/summary information to the user in
a presentable manner.
Options include: Administration, View list of books, Relase Notes
Brief/Summary of information include: Total no of books in store, Total no of new books added
List of books Screen
When the user clicks on this action link from any where in the Software Application this page comes up. It displays a complete list of the books that are available in the store and also relevant info about the books. It reads DIRECTLY from the Books table inside
the Database and presents the info in a tabular format. It also provides the user with certain options to carry out some actions.
Options include: Request book (button beside every book item)
Administration Screen
The Administration Screen is segmented into several Areas that allow the operator to carry out individual/independent tasks. On this Screen the operator of the system has options to carry out many vital tasks as regards the Application. Rather than having to
present many different Screens, all the control/Administrative tasks of this Aplication are included here on this ONE Screen.
Options/Segments include: Add book(s), Delete book(s), View list of books, View books requests, View books returned, View all Students, Request for book(s), Register Student, Return books
(All of these Options can be done/carried out on this one screen without having to bring many different screens to do the different tasks)
>>Add book(s) Area
This area FEEDS info DIRECTLY INTO the Books DB. To accept Data input into the Application this has following text boxes: Book Title, Author, Edition, ISBN, Category Name
>>Delete book(s) Area
Presents the options for deleting a book. It also relates DIRECTLY with the Books table in the DB. It presents the list of books as they are available in the Books DB and places a DELETE action button for EVERY book so that when this button is clicked it removes
the book from the Books DB.
>>View list of books
This will simply bring up the list of books Screen since already we have a screen for this.
>>View books requests
This reads DIRECTLY from the UsersRequest table and just presents the info to the user in a tabular form.
>>View books returned
This reads DIRECTLY from the BooksReturned table and just presents the info to the user in a tabular form.
>>View all Students
Lists out all the students that are registered in the Application System. It READS DIRECTLY from the Students table. This area is used by the Admin/Operator of the Application to view a List of all the Students that have had transactions with the Application.
>>Request for book(s) Area
This area relates DIRECTLY with the UsersRequest table in the DB. It FEEDS in Data into the UsersRequest table. This area allows the admin to collect info of the student that's requesting for the book. It provides texboxes such as: First Name, Middle Name,
Surname, RegNo, BookTitle
>>Register Student Area
This area relates DIRECTLY with the Students table in the DB. It FEEDS in Data into the Students table. This are allows the admin to input info of students that are new to the system.
In other for the Admin to keep track of NEW students who are coming in to request for books this area is very important. It allows the Admin to register a new student so that the student can now request for books.
There are text input fields on this Screen that allow the Admin to collect certain infomation about the student and feed it into the Students table of the DB. Textboxes inculde: First Name, Middle Name, Last Name, RegNo
>>Return books Area
This area relates DIRECTLY with the BooksReturned table. It FEEDS Data into the BooksReturned table. Textboxes include: Book Title, Author, ISBN, First Name of student, Last Name of student
Release Notes Screen
This Screen has three tabs that contain their own individual MESSAGES. The tabs are: Version, Known Issues
Version
Refers to the version of the Application. This tab provides info about the version of the Application
Known Issues
Known problems with the Software Application
Splash Screen
A very simple/ moderate graphic (nothing fancy)to introduce the Application

Hello,
Welcome to MSDN forum.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET web application development, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How To "Start From Scratch" and Build a Clean iTunes Library on a Portable USB External Drive?

A while ago I posted about my confused (and confusing) mess of an iTunes:
https://discussions.apple.com/message/16183210#16183210
While dozens looked I guess eveyone agreed with me "what a mess" and moved on.
So ... someone at the Apple Store suggested that what I should do is start from scratch. But I'm not sure if I understand all the steps. He said I should:
* create a folder of all my songs and just the song files not all the other iTunes stuff -- copy all the mp3 and m4a files that I have in Music > iTunes > iTunes Music > Music to a temp folder let's call it "all my music"
* launch iTunes and tell it to move to / always look at / whatever the terms my new portable external USB drive
* click on file / add to library and tell iTunes I want to add that "all my music" folder to iTunes
At this point I don't care if we lose playlists, artwork, play counts and all that stuff.
Does this approach make sense?
Is there another way?
So how do I tell iTunes to only look to the external? How do I get rid of the old stuff I have on the internal that is offering duplicates and phantom entries? Do I need to delete iTunes and then download a new copy? Should I delete the iTunes foilder? ...?
Any advice would be much appreciated.
Many thanks!

jayessemm wrote:
So how do I tell iTunes to only look to the external? How do I get rid of the old stuff I have on the internal that is offering duplicates and phantom entries? Do I need to delete iTunes and then download a new copy? Should I delete the iTunes foilder? ...?
the simplest and working way.
go to iTunes -> Preferences -> Advanced
On there change the iTunes Media Folder location to your external hard drive
Check that the rest of the preference pane looks similar to the following picture.
After doing so, on menu bar go to File -> Library -> Organize Library
This will force iTunes to copy all songs and playlist's to the new place and to build up a new database for the Library.
Empty or corrupted files will left behind on the old location.
After checking that all is on place and working at the new location, you may delete all files at the former location.
Done
Cheers - Lupunus

Building a Composite Business Process from Scratch-Guided 1 (Cannot Build)

Hi, I have tried to followed the document : Building a Composite Business Process from Scratch with SAP NetWeaver BPM u2013 Guide 1 to create my first BPM program, however, the program cannnot be built. I don't knoww how to fix the program, can you help?
Error: Constraint violation: Active pool "Investment Approval Process" must have exactly one End or Termination but any End Error Event.
Error: Constraint violation: Active pool "Investment Approval Process" must have exactly one Start Event.
Warning: Constraint violation: No administrator defined for "Investment Approval Process".
Warning: Constraint violation: Some of the data elements from input mapping of "Enter Purchase Request"is not initialized before used.
Warning: Constraint violation: Some of the data elements from input mapping of "Approve Purchase Request"is not initialized before used.
Error: Exception during constraint check of processes. Check Your model for problems.
Error: Constraint validation found errors
Ant build finished with ERRORS
Constraint validation found errors
Error: Build stopped due to an error: Constraint validation found errors
Regards,
Matt Yim

Hi Matt,
Check the following in your process:
- If you have gateways in your process, ensure that all the paths have conditions and atleast 1 default path for gateway is set
- Check for Process Administrator assignment and TaskLevel/Lane level potential owners are assigned
- Check for the i/o mapping of tasks
- Check the Problem View for th errors.
Cheers,
Arafat

I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

It is not necessary to delete your old wireless networks first, but doing so may eliminate confusion. If you wish to do that, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button, then select your old wireless networks and delete them with the "–" (minus) button. Make sure the "Remember networks this computer has joined" remains checked.
OK then Apply.
This prevents your Mac from searching for your previous network which will no longer exist.
A new Express creates an open wireless network that you must select before you can configure it. It appears in your Wi-Fi menu like this:
Select it. AirPort Utility will load and walk you through its configuration.
Edit: If you are really using OS X 10.5.1 as shown in your profile, the above screenshot is not applicable. Instead, select the network called "Apple network nnnnnn" and then launch AirPort Utility.

Build a menu from scratch in Premiere Elements?

Is there a way to build a menu from scratch in Premiere Elements, i.e. not use the templates? I want a very simple menu on ONE screen, no sub-menus, etc., and all the templates I try end up creating multiple pages of menus just for the FOUR menu markers in my timeline!
Alternatively, how do I delete multiple pages of a menu, when I have only FOUR menu items and want them all on ONE menu page?
Thank you very much for your help.

robertme
What version of Premiere Elements are you using and on what computer operating system is it running?
You cannot create your own movie menu from scratch using Premiere Elements. The movie menu theme traces back to a main menu psd file and a scene menu psd file and assets. It is the .psd files that need to be created in Photoshop CS or higher because of the essential Layer Sets within the Layers Palette of the .psd file. (There may be other .psd editors that can do this if the can handle Layer Sets and SubLayer Sets, but Photoshop CS or higher will do the job.)
It is often easier to customize the Adobe existing themes at the .psd level than to create them from scratch. Success in this task depends of strict adherence to naming and structural details for creating these menus.
I have done and written a lot about this topic. If interested, please see
http://www.atr935.blogspot.com/2014/09/pe-inside-disc-menu-theme-folderfiles.html
ATR Premiere Elements Troubleshooting: PE: Disc Menu Folders/Files Locations
The bottom of the content in the second link has a list of my blog posts on the application of the principles involved.
Please review and consider. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

[Forum FAQ]Tips on Upgrading Windows 10 Technical Preview from Build 9841 to 9860

The new Build 9860 for Windows 10 Technical Preview has been released recently. Here, I would like to share some experience on upgrading Windows 10 Technical Preview from Build 9841 to 9860.
Tip 1: How to use Refresh option to upgrade.
Scenario
In order to upgrade to Build 9860, the new preview build should be downloaded firstly:
PC settings-> Upgrade and recovery->
Preview builds, which is as shown below.
If there are multiples PCs which are running Windows 10 Technical Preview Build 9841 need to be upgraded, you may just want to use one copy of downloaded preview build to upgrade all of them instead of downloading the new build on each PC.
Solution
If you have upgraded one PC from Windows 10 Technical Preview Build 9841 to 9860, the downloaded preview build (install.esd) can be used to upgrade other PCs. Here we can use install.esd to export the install.wim, then this intall.wim can be used as a recovery
image.
Step 1: Understand the basic information about install.esd.
Install.esd file is located at C:\ $WINDOWS.~BT\sources folder at first. When the upgrade is finished, it would be copied to
C:\RecoveryImage folder. Here is the information in setupact.log which contains information about setup actions during installation:
2014-10-28 19:03:38, Info SP Moving file D:\$Windows.~BT\Sources\Install.esd to D:\RecoveryImage\Install.esd
What’s more, the command Dism /Get-Wiminfo /Wimfile:<path_to_install.esd> is used to display the information about the file install.esd:
Step 2: Export the file install.wim.
The following command is used to export Windows 10 Technical Preview Build 9860 image:
Dism /Export-Image /SourceImageFile:<path_to_install.esd>
/SourceIndex:4 /DestinationImageFile:<path_to_install.wim> /Compress:recovery
Step 3: Copy exported install.wim to other Windows 10 Technical Preview Build 9841 computers, and set the recovery image.
For example, the install.wim has been copied to C:\image folder, the following command is used to set the recovery image:
Reagentc /setosimage /path C:\image /index 1 /target C:\Windows.
Step 4: Use Refresh option to upgrade your PC.
Go to
Update and recovery setting under PC settings, choose
Refresh your PC without affecting your files:
Note:
Applications needed to be reinstalled.
System would use the exported install.wim to refresh Windows 10 Technical Preview from Build 9841 to 9860:
Note: If you use install.esd to refresh directly, just need point the index location as 4:
Reagentc /setosimage /path C:\image /index 4 /target C:\Windows. However, install.wim is easier for deployment, such as creating bootable USB, WDS and SCCM deployment.
Tip 2: Workground to upgrade native boot VHD.
Scenario
Many users use the method native boot into VHD to test Windows 10 Technical Preview. However, there is a limitation on native boot when using VHDs:
If you boot from a VHD, you cannot upgrade the Windows version in the VHD to a newer version. This article describes how to upgrade VHD system Windows 10 Technical Preview from Build 9841 to 9860.
Solution
Step 1: Upgrade in Hyper-V.
Use Hyper-v to create a new virtual machine, and use your native boot VHD
as an existing virtual hard disk:
If booting from this virtual disk directly, it would fail to start due to lacking of boot files. You can use Windows 10 Technical Preview Build 9841 ISO file to repair the startup issue:
You can boot intosystem successfully in Hyper-v, then the upgrade process would be supported.
Step 2: Create Native Boot to VHD.
When the upgrade is finished, shut down the virtual machine, use the same way to create Native Boot to VHD:
Mount the 9860 native boot VHD file.
Use the following command to create boot entry for VHD system: Bcdboot
v:\windows (v: represents the mounted virtual disk drive letter).
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi Arman mohseni,
From my observation, if I click download now, it would create a BITS task:
We can use following command to check:
Import-module bitstransfer
Get-bitstransfer –allusers
From the output, we can see the system account created a BITS job for transferring, under the C:\Windows\Software Distribution\download, we can get the temporary downloaded file, which is approximately about 2.5G.
After we restart, and go to C:\Windows\Software Distribution\download, the temporary file is gone.
If I click the download again, the BITS would create a new task, a new temporary file, if we compare the JobIds of the two times downloading, they are totally different.
On the other hand, if we download a windows update, the JobId would be kept, and the temporary files would be kept, too.
Alex Zhao
TechNet Community Support

Upgrade Flash builder 4 from Master Collection CS5 to Flash builder 4.7

HI ! A few years ago, I bought Master Collection CS5 (Flash builder 4).
Yesterday, I bought an upgrade for Flash builder 4.7 but when I try to activate it, the serial I give (Master Collection CS5) is not valid.
What can I do ?
Regards,
marsupulamis

Hi,
Standard appears to be available here:
https://store5.adobe.com/cfusion/store/html/index.cfm?store=OLS-IE&event=displayProduct&ca tegoryPath=/Applications/FlashBuilderStandard&distributionMethod=FULL
Also matrix is here:
http://www.adobe.com/uk/products/flex/buy/
It will be different for your location, but if you click on the "purchasing options" from the Flash Builder 4 home page you should be able to get Standard.
Niall

Upgrade SRM4 or build SRM7 from scratch?

Similar Messages

Maybe you are looking for