Upgrade step ASU-process post upgrade step

Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List                                                                                Severity     SAP R/3 release frm     SAP R/3 release to
IS-OIL Application Test 600                                                 Optional          
KP06xx: Termination SYNTAX_ERROR                                                 Obligatory     470                           500
CGPL: Entries are blank after upgrade                                                Obligatory          
Error handling of task group execution                                Optional          
Mobile device cannot confirm TO after release upgrade     Obligatory     470                         600
Mobile device doesn't find transfer orders after upgrade     Obligatory     470                          600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600     Obligatory          
Convert customizing for warehouse funds ctr scenarios     Optional          
Various problems classification commitment items (class type     Obligatory          
Unauthorized error messages udring fiscal year change/reassi     Obligatory          
RFFMUDX1 migrates incomplete budgeting tables                          Obligatory          
Non-7bit-ASCII character used for BCS key figures             Obligatory          
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE          Obligatory          
BCS - Tool for Deleting Obsolete Derivation Strategies     Obligatory          
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600     Obligatory          
Migration to ERP 6.0 (EA-PS 6.00)                                         Obligatory          
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00)                      Obligatory          
Missing initialization of new fields in table ANLZ                  Obligatory     46C                       470
Activating VMC for the Internet Pricing and Configurator     Obligatory          
Customer specific BSEG-fields not transferred                  Optional          
Conversion of report headers in drilldown-reporting            Optional                                   600
IBase: Upgrade to Release 4.6C and higher                         Optional     46C                         600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher     Optional     46C                      470
Conversion of CO-Total-Tables                                              Obligatory     46C                      500
Conversion of CO-line-item table COEP                                Obligatory     46C                       600
New General Ledger, problems in CO-documents                 Obligatory                               500
No receivers found in allocations                                          Obligatory     46C                        470
Conversion Of New Process Parameter Long Texts For Search     Optional     110                       600
Migration of process parameters in recipe management     Optional     110                        600
FAQ new depreciation calculation                                        Optional                                600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT     Obligatory     100                       500
Reloading Table T512W                                                        Optional          
Converting Short Texts                                                         Obligatory          
Migrating Data                                                                         Optional     4.7     
Activating SAP ECC Extensions                                          Optional          
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later  on I apply latest SP than still I need to do all this.
Regards
Vinay
Edited by: Vinay Paul on Sep 11, 2009 10:11 PM

Hi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade.      SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4.  Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit

Similar Messages

  • ASU-process POST Upgrade Step on SQL database

    Hi All,
    To check this message in the right format kindly click on reply first then click on quote original icon ("").
    I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
    This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
    Task List                                                                                Severity     SAP R/3 release frm     SAP R/3 release to
    IS-OIL Application Test 600                                                 Optional          
    KP06xx: Termination SYNTAX_ERROR                                                 Obligatory     470                           500
    CGPL: Entries are blank after upgrade                                                Obligatory          
    Error handling of task group execution                                Optional          
    Mobile device cannot confirm TO after release upgrade     Obligatory     470                         600
    Mobile device doesn't find transfer orders after upgrade     Obligatory     470                          600
    Grantee Management - Upgrade from EA-PS 2.00 to ECC 600     Obligatory          
    Convert customizing for warehouse funds ctr scenarios     Optional          
    Various problems classification commitment items (class type     Obligatory          
    Unauthorized error messages udring fiscal year change/reassi     Obligatory          
    RFFMUDX1 migrates incomplete budgeting tables                          Obligatory          
    Non-7bit-ASCII character used for BCS key figures             Obligatory          
    Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE          Obligatory          
    BCS - Tool for Deleting Obsolete Derivation Strategies     Obligatory          
    BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600     Obligatory          
    Migration to ERP 6.0 (EA-PS 6.00)                                         Obligatory          
    Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00)                      Obligatory          
    Missing initialization of new fields in table ANLZ                  Obligatory     46C                       470
    Activating VMC for the Internet Pricing and Configurator     Obligatory          
    Customer specific BSEG-fields not transferred                  Optional          
    Conversion of report headers in drilldown-reporting            Optional                                   600
    IBase: Upgrade to Release 4.6C and higher                         Optional     46C                         600
    ZSAPRCKML_COGS: Upgrade to release 4.7 or higher     Optional     46C                      470
    Conversion of CO-Total-Tables                                              Obligatory     46C                      500
    Conversion of CO-line-item table COEP                                Obligatory     46C                       600
    New General Ledger, problems in CO-documents                 Obligatory                               500
    No receivers found in allocations                                          Obligatory     46C                        470
    Conversion Of New Process Parameter Long Texts For Search     Optional     110                       600
    Migration of process parameters in recipe management     Optional     110                        600
    FAQ new depreciation calculation                                        Optional                                600
    Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT     Obligatory     100                       500
    Reloading Table T512W                                                        Optional          
    Converting Short Texts                                                         Obligatory          
    Migrating Data                                                                         Optional     4.7     
    Activating SAP ECC Extensions                                          Optional          
    I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
    Please suggest me, how to proceed and what to do. please guide if i skip this step now and later  on I apply latest SP than still I need to do all this.
    Regards
    Vinay

    Hi All,
    I also faced a similar issue during upgrade. Some useful findings.
    1. Only super user can access this /n/ASU/START
    2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade.      SAPADM. Only errors (if any) are to be corrected.
    3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
    4.  Execute all the checks /n/ASU/UPGRADE
    5. This surely can be skipped, but not advisable.
    regards,
    Amit

  • Step-By-Step Decom Process Post O365 Migration.

    Hello Geeks,
    We have successfully Migrated to Office 365.
    But still have Exchange 2007 & 2010 servers on-premises.
    Would like to know the procedure to Uninstall them and also would like to manage them from AD.
    So looking forward for information on:
    1. Cutover process,
    2. Dependencies need to be checked 
    3. crusial things need to be taken care of.
    Thanks,
    Prashant

    Hi,
    After you’ve verified that all email is being routed directly to the Exchange Online mailboxes, have completed the migration, you can uninstall Exchange from your servers and remove your on-premises Exchange organization.
    How to Remove an Exchange 2007 Organization
    http://technet.microsoft.com/en-us/library/aa998313(EXCHG.80).aspx
    Modify or Remove Exchange 2010
    http://technet.microsoft.com/library/ee332361(EXCHG.141).aspx
    Here is an article about decommission on-premises Exchange servers, please refer to the Step 7 under the "How do you do this?" section in the following article.
    Migrate all mailboxes to Exchange Online with a cutover migration
    http://technet.microsoft.com/en-GB/library/jj874016(v=exchg.150).aspx
    Best regards,
    Belinda Ma
    TechNet Community Support

  • 12.1.1 POST-upgrade ---verify concurrent process

    I have upgraded 11.5.10.to 12.1.1 successfully when I was running post upgrade
    Oracle® Applications
    Upgrade Guide
    Release 11i to 12.1.1
    Part No. E14010-01
    chapter 4
    Step 1: Verify completion of concurrent programs (recommended)
    The upgrade process creates numerous concurrent program requests. Once you bring
    up the application tier, these programs run automatically to complete tasks such as data
    cleanup and upgrades to historical data, among others. You can run these programs in
    the background, while your system is up and running and users are active, unless
    otherwise instructed in the product-specific sections of this book.
    Before you continue, be sure all the concurrent programs generated by the upgrade
    have run successfully. In the Required Post Upgrade Jobs section of E-Business Suite
    Release 12 Upgrade Sizing and Best Practices (Doc ID: 399362.1), you will find a list of the
    distinct concurrent programs included in the upgrade process. The Best Practices
    section includes a recommendation on how to isolate these programs (and all their
    executions) into a separate concurrent manager queue, which you can use for
    processing.
    post upgrade concurrent request were around 989 but
    by mistake I stopped the concurrent manager and I ran cmclean.sql --:(
    then after some time I shut abort the database
    please tell me what should I do now
    what impact will cmclean and shut abort will have ?
    how do i know which request are clean by cmclean
    and how can I ran them again??
    Immediate reply is appreciated
    AppsmastI
    SHaring Is CArinG

    post upgrade concurrent request were around 989 but
    by mistake I stopped the concurrent manager and I ran cmclean.sql --:(
    then after some time I shut abort the database
    please tell me what should I do now In the Required Post Upgrade Jobs section of E-Business Suite Release 12 Upgrade Sizing and Best Practices (Doc ID: 399362.1), you will find a list of the distinct concurrent programs included in the upgrade process.
    what impact will cmclean and shut abort will have ?cmclean.sql script should not have any impact on the concurrent programs, however shutdown abort will do the following http://docs.oracle.com/cd/E11882_01/server.112/e10595/start003.htm#i1006611
    how do i know which request are clean by cmclean In the same session you will find the list of table that are updated by cmclean.sql script along with the request ids.
    and how can I ran them again??See the doc referenced above.
    Thanks,
    Hussein

  • Upgrade 46C to ECC 6 0 STEP BY STEP ---Developing

    Now the upgrade has reached the "POST Upgrade Steps" which means Its open to the SECURITY ( Authorizations ) to come in.
    1. First I have doing the SU25.
    Question -->Do I need to run (1) on SU25 .
    Answer:NO this is only for IInstallation of PFCG. for upgrading to higher releases only Steps 2 down are needed.
    Please correct me if I am wrong or have additional information which you want to share

    > The only way they are going to see what changes have been made is from the change logs for the roles.  You can look at tables which show differences in the proposal values but they are worthless unless they map 100% to the only changes shown in the roles.
    I think this is what GG is looking for, but as you mention there are both system and audit skill pre-requisites.
    The auditor needs to know and have confidendence in the before concept if roles are to be upgraded via SU25.
    The auditor needs to have knowledge about the release being upgraded to, and which changes would be required (and opportunities made use of to use new features... potentially also redesigning existing roles in new ones...)
    And then map the expected changes (that is their job) to the actual ones (the tools which Alex has mentioned).
    My recommendation would be to use the "you navigate, I drive" approach before giving the auditor access to do a comparison and get lost on their own, potentially.
    That way you know what the auditor is capable of, and the auditor has a better understanding of your upgrade strategy.
    For major release upgrades, redesigning role concepts are an opportunity which should not be missed, and I think a reasonable and skilled auditor should understand that.
    > A potential alternative would be to set up an RFC connection to the system which your pre-upgrade roles were backed up to and then run a comparison between each role in the backup and the current system.
    That could be usefull as well for a snapshot of expected changes between the "real roles" and the upgraded roles in a sandbox, all else (and coding) assumed the same between the release upgrades (which is of course not the case...) It would be helpfull to find transactions for which the coding has officially changed or are now officially the leading transactions for the proposal indicators.
    I have not tried that either - but I think it would be usefull information for the functional folks and developers (including role developers).
    Cheers,
    Julius

  • Step by step process to upgrade EP 6.0 to EP 7.0

    Hi all,
    Can any one plz tell me the process of EP7.0 Upgradation?
    EP7.0 is newly installed on the Other System.
    => I need information regarding the initial System Configuration settings.
    => can we transport the users/groups from EP 6.0 System to EP7.0 System?
    => Step By Step process of the integration of portal content into EP 7.0.
    Thanks and Regards,
    Visweswar

    Hi,
    All the upgrade information is available at http://service.sap.com/instguides -> Upgrade.
    Also check the Upgrade Master Guide:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a1a0eb43-0b01-0010-23aa-908cc4eaabcd
    Regards,
    Praveen Gudapati

  • Error on Oracle 11gR2 RAC database Post upgrade step

    [Upgrade the Oracle Clusterware Configuration|http://docs.oracle.com/cd/E11882_01/server.112/e23633/afterup.htm] Problem Description:
    O.S Version: HP-UX B.11.31 U ia64
    It is upgrading of Oracle RAC 2 node database from 11.1.0.7.0 to 11.2.0.3.0
    I receive following error while perfoming the post upgrade step
    indba1 racdb> srvctl upgrade database -d racdb -o /app/oracle/product/11.2.0.3/db
    PRCD-1231 : Failed to upgrade configuration of database racdb to version 11.2.0.3.0 in new Oracle home /app/oracle/product/11.2.0.3/db
    PRKC-1136 : Unable to find version for database with name racdb
    Actually I am performing the step "Upgrade the Oracle Clusterware Configuration" whill getting the error.
    When I tried on below;
    indba1 racdbp> srvctl upgrade database -d racdb -o /app/oracle/product/11.2.0.3/db
    PRCD-1231 : Failed to upgrade configuration of database racdb to version 11.2.0.3.0 in new Oracle home /app/oracle/product/11.2.0.3/db
    PRKC-1136 : Unable to find version for database with name racdb

    Output from Oracle 11.1.0.7 Home:
    oracle@indba1:/app/oracle/product/11g/db_1 $ srvctl config database -d racdb
    PRKR-1001 : cluster database racdb does not exist
    PRKO-2005 : Application error: Failure in getting Cluster Database Configuration for: racdb
    Output from Oracle 11.2.0.3 Home:
    oracle@usfsdba1:/app/oracle/product/11.2.0.3/db $ srvctl config database -d racdb
    PRKR-1001 : cluster database racdb does not exist
    PRKO-2005 : Application error: Failure in getting Cluster Database Configuration for: racdb

  • Upgrading Oracle Text - Post upgrade step 10.2 to 11.2

    I already upgraded my 10.2.0.4 database to 11.2.0.1 and have to do post upgrade steps. In step 39 of Manual guideline (837570.1) is not clear for me. If some one can explain further would be appriciated. When i check my source ORACLE_HOME/ctx/admin/ctxf102.txt or ctxf102.sql
    Step 39
    Upgrading Oracle Text
    Copy the following files from the previous Oracle home to the new Oracle home:
    * Stemming user-dictionary files
    * User-modified KOREAN_MORPH_LEXER dictionary files
    * USER_FILTER executables
    To obtain a list of the above files, use:
    $ORACLE_HOME/ctx/admin/ctxf<version>.txt
    $ORACLE_HOME/ctx/admin/ctxf<version>.sql
    where version is 920,101,102
    For instance, if upgrading from 10.2.0
    *1. For dictionary files check*
    *$ORACLE_HOME/ctx/admin/ctxf102.txt*
    *2. Execute the script as database user SYS,SYSTEM, or CTXSYS*
    *$ORACLE_HOME/ctx/admin/ctxf102.sql*
    If your Oracle Text index uses KOREAN_LEXER which was deprecated in Oracle 9i and desupported in Oracle 10g Release 2, see below Note for further information on manual migration from KOREAN_LEXER to KOREAN_MORPH_LEXER.
    Note 300172.1 Obsolescence of KOREAN_LEXER Lexer Type

    Hi Srini
    Thank you very much. now i got it.
    Oracle asked me to identify the CTXCAT indexes with KOREAN_LEXER execute the following query as user CTXSYS: if nothing return then i can skip this step.
    SELECT idx_name
    FROM ctxsys.ctx_indexes
    WHERE idx_type = 'CTXCAT'
    AND idx_name IN
    (SELECT ixo_index_name
    FROM ctxsys.ctx_index_objects
    WHERE ixo_class = 'LEXER'
    AND ixo_object = 'KOREAN_MORPH_LEXER ');
    SELECT isl_index_owner,isl_index_name,isl_language
    FROM CTXSYS.ctx_index_sub_lexers
    WHERE isl_object = 'KOREAN_MORPH_LEXER';

  • Post upgrade step for EP

    HI Friends,
    I have upgraded my EP from 6.0 to 7.0 successful with all component. ALos i am getting login screen. SO what are post upgrade step for EP.
    Thanks,
    Regards,
    Sachin

    HI ,
    System restart
    run the SICK verify the installation check
    Check developer traces on the operating system. Log on to
    Check the installed license and profile configuration (RZ10 and PFCG)
    confirm the  operation modes
    Perform a client copy
    Check the status of the SAP Web AS Java and the user SAPJSF
    Check the rdisp/j2ee_start profile parameter
    Check the current state of SAP Web AS Java using transaction SMICM
    SAP Load Generator
    Start SAP Load Generator (SGEN)
    Regards,

  • Post Upgrade Step "Adjust custom development"

    Hello all:
    Based on your BI 3.x to 7.0 upgrade experience, I wanted some insight on the post upgrade step "Adjust custom development per note 857904". Can you please share how you handled this, any details of activities done here...any tips?
    Thanks,
    Pravin

    Hi Pravin,
    Hope this helps you - 
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881 - you can use this checklist for 2004s too!
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0d7c290-0201-0010-bbaa-d8f8af341796
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a1a0eb43-0b01-0010-23aa-908cc4eaabcd
    Bye...

  • Post upgrade step

    please tell me post upgrade step of R12.1.3
    we restore backup of r12.1.3
    please tell us post upgrade step
    on rhel 5.4
    Edited by: user9376205 on May 11, 2011 12:06 AM

    please tell me post upgrade step of R12.1.3What post upgrade steps you are referring to?
    All the steps are documented in MOS doc.
    Oracle E-Business Suite Release 12.1.3 Now Available
    http://blogs.oracle.com/stevenChan/2010/08/ebs_1213_available.html
    we restore backup of r12.1.3
    please tell us post upgrade stepIf you restore the files, why you need post upgrade steps?
    Thanks,
    Hussein

  • Step by Step procedure of SAP upgrade + Oracle upgrade from 4.6C to ECC 6.0

    Hi Chaps,
    Could you please provide the step by step procedure of end to end SAP Upgrade which includes oracle database upgrade as well..and post upgrade process tooo....
    Thanks
    Keshav

    There is nothing like that.
    Each system is different, each application is different; on top of that it would be WAY too much to post here.
    Get your upgrade guides:
    http://service.sap.com/instguides
    --> SAP Business Suite Applications
    --> SAP ERP
    -> SAP ERP 6.0
    --> Upgrade
    --> Upgrade Documentation - SAP ERP 6.0 SR3
    Here choose your OS and platform and read all the notes. Be prepared to use a week just for technical preparation and documentation/notes checking before you even doubleclick on something.
    For the Oracle Upgrade use
    http://service.sap.com/instguides
    --> Other Documentation
    --> Database Upgrades
    --> Oracle
    Markus

  • I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

    I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
    Thanks for your help in advance....

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • SLA Pre- upgrade programs and process and SLA Post upgrade

    Hi Guys
    Can anybody please let me know what are the SLA Pre- upgrade programs and process we have to run and SLA Post upgrade process and programs.
    Thanks
    Ajeesh

    Pl post details of OS and EBS versions. Pl see if MOS Doc 604893.1 (R12: FAQ for the SLA Upgrade: SLA Pre-Upgrade, Post-Upgrade, and Hot Patch) can help
    HTH
    Srini

  • Updating Stalled Process Post ES2 Upgrade

    I just upgraded our server from 8.2 to ES2 SP2.  I had several active process instances before the upgrade that I'm testing post upgrade.
    The process I'm testing uses a Query Single Row Operation which is stalling.  It's stalling because I don't have a required parameter(Data Mapping) defined.  This parameter was not required in 8.2 so it worked fine.
    So I fixed that issue with the process(after creating an application and importing the process), and attempted a retry on the process, but that is not working.  Livecycle continues to use the invalid version of the process that does not specify the required parameter when I attempt a retry.
    So, my question is how can I update the "active" version of the upgraded process and retry the stalled process instances?

    The "deploy" option in the application version menu is apparently what I was looking for.

Maybe you are looking for

  • I have a brand new iPad 2 and it is not being "seen" by iTunes for Windows (64 bit Win 7)

    I originally had my iTunes library (music, apps, etc) on a MacBook.  Used "home sharing" to drag over most of my collection to my new Windows 7 laptop.  All apps, music, etc show up fine in iTunes on Windows but when I unpacked my new iPad 2 and plug

  • Message Mapping Problem

    HI I am calling a Java Mapping Prog from My message Mapping . I get A strange Message when i pass special characters like '?' or '*' through my message mapping to the java mapping . The Message is <b>"For input string : ???". </b> when i pass ??? as

  • Compare two collection in sharepoint

    Hii I want to Compare to collection in sharepoint example: Collection 1: "A","B","C" Collection 2:"A","B","D","E" Result should be: "C" Like in C#  List<string> result = list1.Except(list2).ToList(); I am new to programming Please help me.. regards 

  • Force ipad to show full resolution photos ?

    I am surprised and annoyed to find that all my photos on my IPad have been reduced in size to a preset maximum (2048x1024 or something close to that, I think) during the import process,  I have many very large photos (autostitched landscapes etc), an

  • HT201150 Where is the shut down dialog?

    Whit the last update (10.9.2) pushing the power button nothing happen, pushing it for 1.5 second the mac goes on standby. No way to found the shut down dialog, it was just esier before.