Upgrade still running logon not possible

Dear Experts,
We've upgraded our erp server ecc 5.0 to ecc 6.0 ehp1 via option downtime minimized option, before downtime phase we ve taken an offline backup, after upgrade completed succesfully
Now we have used this offline db backup for system copy to a new test system because customer want to save ecc 5.0 system too,
When we try to logon system we are getting following error, we can logon system via sap* user ;
upgrade still running logon not possible
How can we reset this upgrade on this new test system,
Best Regards

Dear Atakan,
Unlock the SAP-system at OS level with the following commands:
cd /<Upgrade-directory>/bin
   ..exe/tp unlocksys <SAPSID> pf=<transport profile>
   ..exe/tp unlock_eu <SAPSID> pf=<transport profile>
but if the copy system still is in the phase before downtime as this was when the backup was made, please following the upgrade guide section, resetting the prepare.
Regards,
Paul

Similar Messages

Preprocessing Roadmap Orinial system locked / logon not possible

Hi All,
I am currently working on the upgrade from CRM 2007 to CRM 7.0 with EHP1. I am runinng the synchronus upgrade and currently in the Preprocessing ROADMAP (Phase Name MAIN_SHDIMP/DIFFEXPADDI ).
Indeed, we have completed the SPDD / SPAU modification as well. And my question is, I am not able to login into the orignal system and its telling it as Upgrade is running logon not possible. (But this should happen only in the downtime roadmap - because I have done several ECC upgrade) . When preprocessing completed, we will obtrain downtime from the customer and we will start with the downtime roadmap.
But in CRM, I didn get any message or warning like that, I just gave confirmation for modifcation of SPAU / SPDD in the preprocessing roadmap. After few hours, I am not able to login into the originals system itself. Even I could see that there is no shadow system existing in the MMC as well. I am clueless here about the status and howcome it could happen like this ?
In short : My question is, downtime will start after giving confirmation in SPAU / SPDD?
Also I have unlocked / locked the shadow system earlier for some activity in the shadow system. Does that mean accidentally it locked my original system.
If anyone of your have any suggestion please do let me know
I have used the below command to unlock the shadow system...
tp unlocksys SCR pf=G:\SCR_UPGRADE\abap\bin\TPPARAM
SAPup.exe unlockshd SCR
tp locksys SCR pf=G:\SCR_UPGRADE\abap\bin\TPPARAM
SAPup.exe lockshd SCR
Regards
Vijay

Hi,
However, I have unlocked the same to access the original system. But wondering is the behaviour of the tool itself to lock the original system in the preprocessing stage itself?
Used command for unlockign the orinal system
tp unlocksys SCR pf=G:\usr\sap\trans\bin\TP_DOMAIN_SCR.PFL
Regards
Vijay

Server0 getting down and logon not possible ( error in license check)

Hi Guys,
I rebooted my SAP server and after that server0 is in disabled mode, well both the boxes seems to be green but the server0 node in disable mode as if it is maintained by some parameter and I have changed it, which is not the case, also there is no log with dev_server0 since then. I have followed 723909 note and also copied the parameters of a running server but didn't get success. Also when I am trying to login through SAPGUI its giving me error " Logon not possible( error in license check)" while the license is already installed.
dev_w0 log says
M Wed Sep 01 14:42:14 2010
M *** ERROR => sap license, no valid license found [likeyapi_w.c 2260]
M *** ERROR => wlikey_check_webas: There is a permanent license key for "NetWeaver_ADA" in the system but it has never been checked successfully. In this situation a temporary license key mustn't be installed. [sliclikey.c 1314]
M *** ERROR => The temporary license key for NetWeaver_ADA could not be installed [likeyapi_w.c 2305]
SAP ECC 6.0 release 700
DB: MaxDB
OS: Win2k3 server
Please help.
Regards
Mridul Gupta

License issue is resolved but server0 node is still in disable status while the instances shows green, I checked dev_jcontrol log and found :
[Thr 2168] [Node: server0] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_25-x64
[Thr 2168] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\W6Q\DVEBMGS12\exe\jvmx.jar
JStartupIReadSection: read node properties [ID123322550]
-> node name          : server0
-> node type          : server
-> node execute       : no
-> jlaunch parameters :
-> java path          : C:\j2sdk1.4.2_25-x64
I think the node execute sud be yes, I just wanted to know how I can enable this.
Regards,
Mridul Gupta

LOGON NOT POSSIBLE. ERROR IN LICENSE CHECK -- NO HWid from message Server

We could logon to the EC6 system. I
Stopped the EC6 system and started
it . It started with License Key
Error. the License key was available
and was shown in SLICENSE transaction
but it was giving LOGON NOT POSSIBLE.
ERROR IN LICENSE CHECK.
SO I deleted the TEMP and the Original
License via command SAPLICENSE -DELETE
and then REINSTALLED THE LICENSE with
the details
SAP System: EC6
Inst. Number: 0020174764
Hardware Key: Z1686313186
System Number: 310590866
Expires On: 31.12.9999
Key:
RZKGNA79K9U4F7D7SGGOWU1V
The License was successfully installed
but Still the samer error .LOGON NOT
POSSIBLE. ERROR IN LICENSE CHECK
Somehow it is not getting the hardware
key.But when I run the command
saplince -get then it returns
saplicense: HARDWARE KEY = Z1686313186
DEV_W0 log says that
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 509]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2268]
Please Help

Sergo
My sapmsEC6 has been assigned to 3601 port as my instanace number is 01 . So that is correct. the Thread which has given didn't help . Thanks for you inputs.
Yogesh

"Logon Not Possible (Error in License Check)" at DR Site

Hi,
I am doing DR ( Disaster Recovery ) Site. I used Tivoli Storage Manager ( TSM ) to take FS Backup & DB Backup.
On the DR site I restore the same backup successfully and the resultant is I am able to run my SAP server.
When I try to connect through SAP Logon. it gives me first screen.
Problem none of the user is permitted to enter except sap*. for other user following message come.
"Logon Not Possible (Error in License Check)".
i know how to apply new license but in requesting permanent license the SAPnet is not asking hardware key.
Best Regards,
Syed Saifuddin
Software Architect ( JEE 5 )
SAP BASIS Administrator

Hi Syed,
Please check the SAP Note
Note 94998 - Requesting license keys and deleting systems.
Also check the sapms<sid> port.
Thanks,
Prabhat

Logon not possible (error in license key)

dear sir
I had a temporary license which got expired yesterday. but i received the permanent license today
and i wanted to install it on the solution manager server, but when i 'am trying to log in ,it throws
an error at the bottom that " logon not possible (error in license key ) "
pl given a solution
thanks
john

Logon using SAP* in client 000.
Probably you need to maintain profile parameter login/no_automatic_user_sapstar = 0 and restart the system before you are able to logon with user SAP*

Error - Logon not possible; none of the active logon procedures is possible

Dear Gurus,
I'm trying to configure SSL with User mapping to SICF service: NWBC.
-SSL configured with STRUST transaction and I see that it is working via Internet Explorer
-SICF service NWBC was set to: "Required with Client Certificate (SSL)"
-User mapping was set like described in this article: https://help.sap.com/saphelp_nwmobile71/helpdata/en/17/1514e9b7eb4f74b0b49327b8f2a662/frameset.htm
But I get error:
Logon not possible; none of the active logon procedures is possible
Any idea ?
Please advise,
Dimitry Haritonov

Hi,
I would try to check logs first. In transaction SMICM you can set up level of logging for ICF services. So set it up to the highest possible level (this one actually dumps whole content of HTTP request, so maybe that's not necessary) and try logon again. You should get a reasonable info and you can try to figure out why it fails.
Cheers

SSO logon not possible; logon tickets not activated on the server

When I am on RWB
1) click "component monitoring" ->"display all"
2) click "CCMS"
I get a popup says:
"SSO logon not possible; logon tickets not activated on the server"
I find some threads about this on SDN but they are about
EP. My case is PI7.0SP08.
Please advise how to overcome this issue?
Thanks w/ points.
Message was edited by:
jennifer lee

hI,
do you have the follwoing in our SXMB_ADM if not add them.
SXMB_ADM->IntegrationEngine configuratin-> edit the speicifc configuratin then add the follwoing
Category:RUNTIME Parameters: logging Value:1
If its done. check this alos...whether your browser settings will accept the cookies or not. for SSO logon ticket method you need to have cookies accepted by our browser so check it. in internet page slect TOOLS ->internet options then ckeck for cookies settings.
How to Enable Single-Sign-On for XI 3.0 at:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/69d95112-0d01-0010-8297-fa31feea26e0
/people/alexander.bundschuh/blog/2007/01/16/principal-propagation-in-sap-xi
http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/b7d53ae8ab9248e10000000a114084/content.htm
regards
manoj kumar

Active logon not possible

Hi,
A geting this error
Active logon not possible
when i try to logon to SUS using EP.
Regards,
Manu

Hi,
I would try to check logs first. In transaction SMICM you can set up level of logging for ICF services. So set it up to the highest possible level (this one actually dumps whole content of HTTP request, so maybe that's not necessary) and try logon again. You should get a reasonable info and you can try to figure out why it fails.
Cheers

I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion - NOT Mountain Lion. Tried all available software updates - no joy. Any ideas please?

I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion (10.7.4) - NOT Mountain Lion. Tried all available software updates - all up to date apparently but still no joy. OS X Lion shows the LX5 as a supported file format. I dont want to have to upgrade to Mountain Lion just to see if this solves the problem. Any ideas please.

Since when did this happen? Directly after you upgraded to Aperture 3.3.2?
If it happened directly after the upgrade the problem may be, that the raw support for your camera got lost. For some posters it helped to register the raw support again, see this post by Alan Roseman:
Aperture 3 preview of raw file greenish
If this does not help, you may need to reinstall Lion to bring back the raw support.
But if the problem occured independent of a new installation, ypu may have a problem with your camera or the card you are using. Have you tried to use a different card or to reformat the card in the camera?

Japanese Langauge Logon not possible

Hello Colleagues
I am working in 4.6 C IDES system.
By default the Language Japanese comes installed.
Even in default profile the parameter entries are maintained.
But still the logon in client 000 is not possible with the Japanese Language.
When we login by a different languge and post the Japanese characters for the
data entry the sytem is not able to identify the Japanese characters.
It reads the japanese Characters as question mark symbol.
I will highly appreciate your help and advise in the problem described above.
Thanks and Regards
Pooja

when i provide the suer ID and password in English and the logon language JA.
I get the error message as;
00:629 J
and whn i double click the red cross i get the error message as
00:127 J
Thanks and Regards
Pooja

If I've installed an app from the app store and the author's distribution certificate expires, my app will still run or not? Thanks a lot.

If I've installed an app from the app store and the author's distribution certificate expires, my app will still run in my device or not?
For example in the case that the author won't renew the certificate itself, i guess his app will be removed from the app store; but what happens to the apps installed in the devices?
Thanks a lot.

The author's certificate is only used to authenticate the author when the app is uploaded to the app store.
The app is then signed by Apple before being added to the app store.
Nothing will happen to your app except you won't get any updates.
Evertually, iOS upgrades could stop the app from working if you upgrade iOS beyond what the app supports.

'RSTS_READ' after upgrade error Required conversion not possible (ZFORM16)

Hi,
We have recently upgraded from SAP 4.7 to SAP ECC 6.0.
For client requirements, they have developed ZFORM16 in 2006 by copying the standard form HINCF160.
But after upgradation, when we execute ZFORM16 for 2006 data we are getting the error message:
                         Required conversion not possible
Some analysis of the issue is:
1)     In include: ZPCF16IN3 at statement:    PERFORM read_temse.         " MDSNT927906
2)     It is going to include : ZPCF16IN8 we are getting the error message at the statement :
call function 'RSTS_READ'
The error message is: Required conversion not possible
When I have checked the standard of form 16 HINCF160 code in ECC 6.0 is as:
In include PCF16IN3, PERFORM read_temse. Statement is commented and the corresponding form in PCF16IN8 include is also commented (Form read_temse) and now SAP is using different logic to get the DETAILS OF TAX DEDUCTED.
If I try to comment the PERFORM read_temse in ZPCF16IN3 then I am able to get the Form16 but DETAILS OF TAX DEDUCTED are not displayed. DETAILS OF TAX DEDUCTED logic is in PERFORM read_temse in ZPCF16IN3.
Can someone help me in solving the issue?
Regards,
Prem

We had to restart SAP & Oracle and the issue is solved

External Simpledrive is still running but not working?

I hear and feel that the harddrive is still running, but I can't access the harddrive or anything on it. I need to know how to work it again without uninstalling it because it has a ton of stuff I need on it!

Have you tried accessing the device? On your windows screen, press start -> run. From here, type in the drive (d:// or e://). If the drive is still installed correctly, the next screen should display your drive and its contents. I hope this helps!
Nothing I post is an official statment of Best Buy or Geek Squad, it is only a helpful opinion!

Even after uninstalling, reinstalling Firefox, the Firefox profile folder is empty, and I get the message "Firefox is still running and not responding close firefox...

Even after uninstalling, reinstalling Firefox, the Firefox profile folder is empty, and I get the message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." I have followed all the directions I can find, on my computer and Firefox Support. Still, the same message comes up, and "firefox" is not shown in my Windows Task Manager.
What can I do?

Delete the profiles.ini file and let Firefox create a new default profile.
* http://kb.mozillazine.org/profiles.ini_file
* http://kb.mozillazine.org/Profile_folder_-_Firefox#Files_and_folders_outside_the_profile_folder

Upgrade still running logon not possible

Similar Messages

Maybe you are looking for