Upgrade straight from OS X 10.2.8 to OS X 5?

Is it possible to upgrade straight from OS X 10.2.8 to OS X 5? Will I need to get all the systems in between?

Hi-
Your 400MHz machine is only capable of running up to 10.4.11.
Your machine is far below the minimum requirements for 10.5x.
http://support.apple.com/kb/HT3759
BTW, you can upgrade straight to 10.4x with the proper retail install disc.

Similar Messages

Can I upgrade straight from 3.0.19 to 3.6.10 without losing bookmarks, history etc

Can I upgrade straight from 3.0.19 to 3.6.10 without losing bookmarks, history etc? I can't afford to lose all of these as they are work-related.

All your bookmarks history etc... is stored in your user profile on your pc, not in the install directory of firefox so when you install a newer version it only over writes the files in its install directory and not your bookmarks etc...
There is also some add-ons that can backup all your user data so that you can restore them later.
or
If you want to be safe you can manually backup your profile before you begin the upgrade.
On Windows Vista or 7 you will find your profile at;
C:\Users\<USERNAME>\AppData\Roaming\Mozilla\Firefox\Profiles\<random-generated-profile-name>.default
On XP I believe it is at;
C:\Document and settings\<username>\Application Data\Roaming\Mozilla\Firefox\Profiles\<random-generated-profile-name>.default
Just copy the contents of the above folder to somewhere else on your hard drive and if your bookmarks didn't copy over then you can manually place the files back into the above directory.

Can I upgrade straight from mac os 8 to mac os x 10.2 'jaguar' on my power mac g3 beige?

Can I upgrade straight from mac os 8 to mac os x 10.2 'jaguar' on my power mac g3 beige 'outrigger' desktop? There are two discs on ebay for 10.4.2 on ebay: http://www.ebay.co.uk/itm/Apple-Mac-OS-X-10-2-Installation-Discs-Jaguar-/2006580 32151?pt=UK_Computing_Software_Software_SR&hash=item2eb8269617#ht_466wt_64

Hi Aaron, should work if it meets these requirements...
System requirements
Supported Computers:[2]PowerMac G3, G4, early PowerMac G5, iMac, eMac, PowerBook G3 orG4, or iBook computer
Amount of RAM Required: 128 megabytes (MB) (Although 256 MB to 512 MB is highly recommended by many people who have used Mac OS X v10.2.8 as the real amount of RAM used when only the Operating System is running is around 200 MB, but it can be run with as low as 96 MB) although it will not run at full speed.
Processor Type: PowerPC G3, G4 or G5 running at 233 MHz or higher.
http://en.wikipedia.org/wiki/Mac_OS_X_v10.2
Except if it has a SCSI card...
http://docs.info.apple.com/article.html?artnum=86117

Hi There, i have a power mac g5, which has the following spec, can i upgrade straight from 10.5.8 to 10.7? or do i have to purchase 10.6 first?;

Hardware Overview:
Model Name:          Power Mac G5
Model Identifier:          PowerMac7,3
Processor Name:          PowerPC G5 (3.1)
Processor Speed:          2.7 GHz
Number Of CPUs:          2
L2 Cache (per CPU):          512 KB
Memory:          4 GB
Bus Speed:          1.35 GHz
Boot ROM Version:          5.2.4f1
Hardware UUID:          00000000-0000-1000-8000-000D9379499E

Lion won't boot or install if there isn't EFI or UEFI firmware.
You can focus on Intel side because that is simple and easier (though because some early "Core Duo" models are cut off from 10.7 and only Core2Duo and above are supported).
There is no firmware support. The logicboard can't. There is no PowerPC code in Lion, which was the heart of the G5 kernel.
Lion integrates the iPad and other iOS devices with the desktop and iCloud along with Apple's AppStore.   There is a lot of 'something' and what value or benefit it offers to the traditional desktop OS, I think the jury will have to decide.
But 10.4.11 may also be the most optimized Apple OS for the PowerMac platform.
Excellent value on Apple refurbished equipment -
Apple Special Mac Pro
Apple Specials MacBook Pro
Apple Specials iMac

I am currently running tiger on a 2007 model. I want to get an iPod touch as my classic died. To be able to get a touch Ive been told I need to upgrade to snow leopard. Can I upgrade straight to snow leaped from tiger? Some one please help!

i currently have a 2207 iMac and I'm running tiger. I had an iPod classic which synced up beautifully but it has just died. iPod touch's are the only things that are on the market now as classic are no more. I've been told that an iPod touch won't qork on tiger operating system and I need to get snow lWoodard. Can I upgrade straight to snow leopard or do I need to get leopard first? Also will the new iPod touches work with snow leopard? Many thanks, please help me as I keep getting different answers. Ben

And the only way to figure that out would be verifying my disk using the Disk Utility?
Thank you for that. If I am not missing out on anything by skipping Lion then that will be my option. A few extra dollars in my pocket is always a good thing.

How Can I Upgrade JServer from 9.2.0.6 to 9.2.0.7

Hi Gurus,
I have two Db servers running AIX 5.3 64bits. They both have Oracle Db Server 9.2.0.1 installed on it but the first one was upgraded to 9.2.0.6 and finally upgraded to 9.2.0.7. The second server on the other hand was upgraded straight to 9.2.0.7 from 9.2.0.1.
The problem now is that on the first server, I still have JServer release 9.2.0.6 running on the first server despite being upgraded to 9.2.0.7. Meanwhile, the 2nd server has JServer release to be 9.2.0.7. Is there any particular way of upgrading JServer? How can I do this other than applying Oracle 9.2.0.7 patch which I have applied already? Any help please?
Thanks
OO

The problem now is that on the first server, I still
have JServer release 9.2.0.6 running on the first
server despite being upgraded to 9.2.0.7. Meanwhile,
the 2nd server has JServer release to be 9.2.0.7. Is
there any particular way of upgrading JServer? How
can I do this other than applying Oracle 9.2.0.7
patch which I have applied already? Any help please?Did you omit running cmpdbmig.sql somewhere? JServer is JAVA Virtual Machine is on of the options upgraded when you run the script $ORACLE_HOME/rdbms/admin/cmpdbmig.sql.
SQL>SELECT comp_name, version, status FROM dba_registry;
SQL>cmpdbmig.sql

Upgrade 4240 from 4.1 to 5.0

Salam
i want to upgrade 4240 from 4.1 to 5.0
when i am in romon mode and i give ip address to managment Interface of IDS and Tftp Server Address. After giving address i am not able to ping in romon mode to tftp server. i have use cross cable between IDS and TFTP Server and also droping straight cable from IDS and tftp server on switch. But when i am in configuration mode then i can ping. So please tell me what i do to upgrade 5.0. also tell me if any other method to upgrade . Thanks in advance

If you are truly attempting to upgrade from 4.1 to 5.0 (versus a re-image), the correct approach is to install the 5.0(1) Major update file using the CLI upgrade command. This will retain any configuration settings on the sensor.
The steps you describe above are to re-image your sensor using the 5.0(2) system image. I am not sure why your settings are not working. Have you assigned an IP address to the gateway? Depending on your network topology, this may be necessary. You should also try pinging your gateway or another active address on your network to see if you are even getting out of the sensor.
-Rusty

HT1338 can I upgrade straight to lion without purchasing snow leopard if I am running on OS 10.5.8

can I upgrade straight to lion without purchasing snow leopard if I am running on OS 10.5.8?

Well, yes, if your Mac meets the requirements, you can afford to erase the drive completely, & don't mind paying $10 more for Lion on a Flash stick than Snow Leopard/10.6 on DVD & Lion/10.7 download from the App Store is.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they do still have it:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
Snow Leopard/10.6.x Requirements...
Lion/101.7 System requirements
    •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
    •    At least 2GB of memory, (I say 4GB)
    •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
    •    At least 4GB of disk space for downloading, (I say 40GB at least)
Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
Or, if you can afford to erase everything & spend $10 more than the 10.6 Disc & 10.7 from the App Store...
Or if you can erase your disk...
http://store.apple.com/us/product/MD256

Can I install Maverick straight from Snow Leopard ?

Hi there,
I have succesfully installed & upgrade my OS from ML to Maverick.
However, I have another iMac which only runs on Snow Leopard. Can this iMac be upgraded straight to Maverick or do I have to purchase to upgrade to Snow Leopard first before upgrading to Maverick ?
Thanks

petermac87 wrote:
Please clarify. You say the other Mac runs on Snow Leopard but ask if it needs to be upgraded to Snow Leopard. Either way, it needs to conform to one of these Mac models to be able to run Mavericks.
http://www.apple.com/au/osx/specs/
Also be aware that any PPC programs will no longer run in Mavericks. Check here for compatability.
http://roaringapps.com
Cheers
Pete
Thanks Pete for your assistance.
There was a typo om my part. What I meant to say was, I am on Snow Leopard and ask if I need to update to the latest Snow Leopard before upgrading to Maverick. I have just checked my Version is 10.6.8 so I am not sure if my SL is the latest).
On yr second query, what you meant by PPC progams ? I do not run any Windows program if that is what you meant ? Also my 27" iMac is a few versions behind which I think runs on Intel chip.
Thanks

Downloading Music straight from phone

Hello People!
I have a Nokia 5800 XpressMusic Black and Silver.
I'm with Orange and I want to know will it cost me money to download a song from the Nokia
Music store straight from my phone? I have 500 MB free internet browsing but will it still cost me?
I will call Orange and see if they can help but they may say speak to Nokia in which case I might have to
unless one of you guys can help me.
Thanks!
Chater Jordan
Hope you found my posts helpful hit that Kudos button please!
Chater Jordan E70 >>> E65 >>> 5800
Solved!
Go to Solution.

Have a look at this:
http://store.ovi.com/content/71297C6100F28706E040050A85320443?clickSource=search
Lovin ’ that tune? Create music moments: discover and buy music. Get Shazam on a free* to use basis until Nov.30. 2009. This promo is on a limited, first come first served basis, so get Shazam now to discover music for free.. At the end of the promo, to continue using Shazam you can download a new app and use Shazam Lite** with limited features and tagging for free; or pay once for unlimited tagging and full features. *Standard network data charges apply **30 days trial when you upgrade.
Is it clear now?
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Lenovo S12 really slow straight from box

Hi I just recently bought and a lenovo s12. It has been really slow and laggy straight from the box. i knew I was buying a netbook and the performance isnt comparable to modern laptops but every page I click on loads in pieces and I experience scoll lag everytime I load a page on the internet. It is vitually incapable of playing a standard youtube clip. I have tried lots of different things, slimming down the start up processes, upgrading ram, installing video accelerator but nothing seems to have ,ade any difference. Surely watching standard videos on the net and merely viewing a webpage are not beyond the cababilities of this machine. Even as I write this message if I have to delete something it lags as I delete. I would appreciate any advice or indications as to whether thisis normal or not. thanks

Hi there,
for youtube video ... update to latest flash player .10.1xx get Flashplayer & for offline video install K-Lite Codec Pack Full
and use the Home Cinema Player comes with the install, instead of Windows Media Player...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

Facing Parse Errors after upgrading database from 10g to 11g

Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        30 anonymous block
319e277050        57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
Suresh

Hi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards,

Unable to Sign in analytics After Upgraded obiee from 10g to 11g

Hi all,
I have problem when upgrading catalog from 10g to 11g.
The error is:" Unable to Sign In . An invalid User Name or Password was entered. "
I upgraded following the steps like this:
1.Login EM and check BI server is running successfully.
2.Started the UA.bat.
Select the operation:Upgrade Oracle BI RPD and Web Catalog.
Step by Step,and the upgrade completed successfully.
3.Open the RPD online using the Admintool succefully.
4.But when I Login the BI and view the dashboard with the 10g's user (Administrator),the page appear the error "*Unable to Sign In . An invalid User Name or Password was entered.* "
5.Then I Try to Regenerating User GUIDs
1. Update the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI:
a. Open NQSConfig.INI for editing at:
b. ORACLE_INSTANCE/config/OracleBIServerComponent/coreapplication_obisn
c. Locate the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter and set it to YES, as follows:
d. FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES;
e. Save and close the file.
2. Update the Catalog element in instanceconfig.xml:
a. Open instanceconfig.xml for editing at:
b. ORACLE_INSTANCE/config/OracleBIPresentationServicesComponent/
c. coreapplication_obipsn
d. Locate the Catalog element and update it as follows:
e. <Catalog>
f. <UpgradeAndExit>false</UpgradeAndExit>
g. <UpdateAccountGUIDs>UpdateAndExit</UpdateAccountGUIDs>
h. </Catalog>
i. Save and close the file.
3. Restart the Oracle Business Intelligence system components using opmnctl:
4. cd ORACLE_HOME/admin/instancen/bin
5. ./opmnctl stopall
6. ./opmnctl startall
7. Set the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI back to NO.
Important: You must perform this step to ensure that your system is secure.
8. Update the Catalog element in instanceconfig.xml to remove the UpdateAccount GUIDs entry.
9. Restart the Oracle Business Intelligence system components again using opmnctl:
10. cd ORACLE_HOME/admin/instancen/bin
11. ./opmnctl stopall
12. ./opmnctl startall
BUT THE ERROR ALSO EXISTING!
So,waiting for the help,thanks!

Hi,
if your using oracle db please make sure your db settings and tnsnames.oRA settings
also try you please try below troubleshooting steps:
1) please check latest error message and find the root cause,
presentation catalog log path:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIPresentationServicesComponent\coreapplication_obips1\sawlog0.txt file
also check it nqserver.log file
oracle bi server log path ref:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\nqserver.log
2)can you try to login RPD,EM and console by using your weblogic a/c then try to login with some other user.
if its not working then try to delete that users from catlog and check it Check OPMN services are running state.
e.x:
C:\Oracle\Middleware\instances\instance1\bin>opmnctl startall
opmnctl startall: starting opmn and all managed processes...
C:\Oracle\Middleware\instances\instance1\bin>opmnctl status
Processes in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 4992 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 2420 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 1856 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 5684 | Alive
coreapplication_obis1 | OracleBIServerCom~ | 5232 | Alive
3) Refresh GUIDs and Restart WebLogic and OPMN Services then try it again...still if your getting same issues then try to
check DB(try to login and confirm) and check it RPD --> physical layer connection pool setting and try to
view physical data.
also paste it your latest error log message (nqserver.log and sawlog01.log message) here
THanks
Deva

Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?

Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?
For those who have done this,
1. What quirks did you find that you had to overcome in your installation (I know that everyone's environment is different and produces differest results)?
2. What part of your code broke for which you had to find fixes?
Tips and suggestions for a smooth installation, besides following the installation document.
Thanks!

Create a car (archive file) in CF 9 enterprise which will capture all CF 9 settings like Data sources, Web services etc. Make sure when you are doing this, pop up blocker is disabled.
NOTE : While creating the archive file, give the full name with the absolute path in the package name. For example C:\Test\mypackage.car
Then move this car file into the server where you want to install CF 11. Install CF 11 and then deploy this archive (car) file. All CF 9 settings will be migrated to CF 11 enterprise.
Else, if you want to install CF 11 on the same server where CF 11 is installed, then remove the connector for all the websites which are configured with CF 9, make sure the CF 9 services are running and then run the CF 11 installer and at the end of CF 11 installation, you will get a dialogue box which will ask you to migrate CF 9 settings in CF 11.
Run the Code Analyzer in CF 11 Administrator to check whether any the CF 9 code used in your application is breaking in CF 11 or not
HTH
VJ

Upgrade straight from OS X 10.2.8 to OS X 5?

Similar Messages

Maybe you are looking for