Upgrade SW Procedures for 15454

Can someone provide me with doc's or knowledge of the steps needed to upgrade from 3.2.1 to 4+. I have 7 node's that need to upgrade and I need to know the good and bad.
Do all have to be upgraded at the same time?
How long does an upgrade typically take?
Can it be done remotely or not recommended? etc.
I know this is kind of open ended but any and all info is appreciated. Thanks

I've only upgraded from 2.1.2 to 2.2.0 during new turn-ups, but those were easily done remotely. You will want to make sure your TCC/TCC+ cards are not in alarm before the upgrade. They don't have to be upgraded right at the same time.

Similar Messages

Step by step procedure for Upgrade to ECC6.0

Hi,
I gained a lot from this forum . Can someone please mail me at
[email protected]
step by step procedure for upgrade .
Will award full points for helpful documents..
With regards,
Mrinal

SAP defined a roadmap for upgrade.
1) Project Preparation
Analyze the actual situation
Define the objectives
Create the project plan
Carry out organizational preparation for example identify the project team
2)Upgrade Blueprint
The system and components affected
The mapped business processes
The requirements regarding business data
3)Upgrade Realization -- In this phase the solution described in the design phase is implemented in a test environment. This creates a pilot system landscape, in which the processes and all their interfaces can be mapped individually and tested on the functional basis.
4)Final Preparation for Cutover -- Testing, Training, Minimizing upgrade risks, Detailed upgrade planning
5)Production Cutover and Support
The production solution upgrade
Startup of the solutions in the new release
Post processing activities
Solving typical problems during the initial operation phase.
SAP expects at least 2 to 3 months for Upgrade and that again depends on project scope and complexity and various other factors.
STEPS IN TECHNICAL UPGRADE
     Basis Team will do the prepare activities. (UNIX, BASIS, DBA).
     Developer need to run the Transaction SPDD which provides the details of SAP Standard Dictionary objects that have been modified by the client. Users need to take a decision to keep the changes or revert back to the SAP Standard Structure. More often decision is to keep the change. This is mandatory activity in upgrade and avoids data loses in new system.
     After completing SPDD transaction, we need to run SPAU Transaction to get the list of Standard SAP programs that have been modified. This activity can be done in phases even after the upgrade. Generally this will be done in same go so that your testing results are consistent and have more confident in upgrade.
     Run SPUMG Transaction for Unicode Conversion in non-Unicode system. SPUM4 in 4.6c.
     Then we need to move Z/Y Objects. Need to do Extended programming check, SQL trace, Unit testing, Integration testing, Final testing, Regression Testing, Acceptance Testing etc.,
The main Category of Objects that needs to be Upgraded is
     Includes
     Function Groups / Function Modules
     Programs / Reports
     OSS Notes
     SAP Repository Objects
     SAP Data Dictionary Objects
     Domains, Data Elements
     Tables, Structures and Views
     Module Pools, Sub Routine pools
     BDC Programs
     Print Programs
     SAP Scripts, Screens
     User Exits
Also refer to the links -
http://service.sap.com
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
Hope this helps you.

Procedure for Upgrading Kernel of 700

Hi,
I would like to know the if procedure for upgrading the kernel of release 700 is same as upgrading other release like 640. I have upgraded the kernel release 620 and 640.
Just want to know if any extras steps have to be followed for upgradation of 700. OS is windows 2003 with oracle database.
Also, I have a query that can we upgrade a kernel from 640 to 700 directly by overwriting the kernel of 700 over 640 or not. If not please let me how can I upgrade from 640 to 700.
Waiting for some nice replies....Thanks all in advance.
Regards
Sharath

The JSPM has the following features:
Usability
- Offers a simple and intuitive graphical user interface (GUI)
- Shares common GUI with SAPinst and SAPJup
- Automatically detects and offers you only components that can upgrade deployed components
- Shows only necessary information. Shows additional details at your request.
Deployed Component Overview
- Displays support package level information
Support Package Level Administration
- Allows definition of dependencies between versions of software components
- Checks whether a new software component version may correctly upgrade an existing software component version
Development Component Level Administration
- Checks deployment dependencies between development components
 Update of Kernel Binaries, Software Deployment Manager (SDM), and JSPM
Deployment
- Allows you to apply a support package stack
- Allows you to apply single support packages
- Allows you to deploy third-party software components and SAP software components that are not part of an SAP usage type
- Informs you if restarting of the J2EE Engine is necessary during the deployment process
- Monitors and logs the deployment process
- Allows you to restart the deployment of support packages.

How to check IGS version and procedure for upgrading IGS patch level

Hi all,
We are on BIW 3.5 .Iam not clear about how to check the version of IGS and its patch level .I went through various notes but still iam confused with tracing it , can someone plz help out?
Secondly want to upgrade IGS version i went through note 454042 but still confused with doing that , Can someone plz refer other notes or detailed procedure for upgrading IGS.
Our BIW Production and Test are on AIX and Development is on HP-Unix OS .
Points guaranteed for the same. Requested to revert at earliest as this is urgent .
Regards,
Saumya

Hi,
Check this link which may help u:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/igs-upgrade-1455477
The installation/upgrade procedures for the integrated IGS are as follows:
Integrated Version Installation
The integrated IGS is automatically installed with the SAP Web Application Server.
Integrated Version Upgrade
You find the upgrade files for the integrated IGS version on the SAP Service Marketplace:
http://service.sap.com/swdc ® Download ® Support Packages and Patches ® Entry by ApplicationGroup ® SAP Frontend Components ® SAP IGS ® SAP IGS .
There, you find the IGS executables and libraries (igsexe_.sar) as well as the IGS folder structure (igshelper_.sar) containing among others font files.
With the upgrade files of the executables and libraries, proceed exactly like you would with kernel patches (for example, extract the Archive to the same location). More information about kernel patches can be found in the related note 19466 in the section Copying and Installing a Patch.
The upgrade files for the IGS folder structure must be extracted to the instance directory (DIR_INSTANCE). More information can be found in note 1028690.
After a restart of the Web AS the new IGS is up and running.
Information about finding out your IGS patch level is provided in note 931900.
For an upgrade of an integrated IGS please also check note 896400.
For more info check this SAP Help doc:
http://help.sap.com/saphelp_nw04s/helpdata/en/4b/72d43ac66e1f08e10000000a114084/frameset.htm
Hope these helps u...
Regards,
KK.

Upgradation procedure for ALE/IDOCS

Can anyone let me know what is the upgradation procedure for ALE/IDOCS and what are the steps needs to be checked out during technical remediation part of version upgrade(lower version to ECC6.0)?

IDocs are backwards compatible, so I don't think you need any special procedures for them, just a regular test, to make sure everything stull works fine. If you've had extended any standard IDocs, that part will need to be reviewed, as any other custom development.
However, there might be a newer version of the IDoc type available in ECC 6.0, which you didn't have in the previous release. You might want to see if there would be any benefits in switching to the newer version.
I'm sure you'll find all the information on the Upgrade page on SAP's [web site|http://service.sap.com/upgrade]. Also there is an SAP Press book on the subject.

Can i upgrade icloud storage for secondary account?

My secondary account is used mostly for email. I deleted a ton of them but somehow am still voer the 5GB limit.
I'm willing to pay the $100 upgrade to get rid of the hassle, but is theere a way to upgrade icloud storage for your secondary account?

You would probably have to temporarily make the secondary account the primary account to upgrade it. To do this, go to System Preferences>Mail,Contacts,Calendars...delete the secondary account, then go to System Preferences>iCloud, sign out of your primary account and choose Delete at all of the prompts (your data will still be in iCloud), then sign back in with your secondary account ID and upgrade the storage.
After upgrading the secondary account storage, reverse the procedure to assign the primary and secondary accounts back the way they were.

Step by Step procedure for Integration of B0 with BI 7.0, Portal

Hi,
My key concerns include integration with SAP Portal, which I did not find in instalaltion guide.
Please advice on step by by Procedure for BO with BI 7.0 starting with the right version of BO to be installed.
1. Which version compatible with BI 7.0 SP 12, LATER TO BE UPGRADED TO sp 16
2. Source of data will be BI and reports will be using BO.
3. What are components to be installed
4. Prerequisites for Integration with BI AND SAP Portal.
5.Steps for Integration with BI 7.0
6. Steps for Integration with SAP Portal- Where to get the sample iviews. What to do for connction between Portal and BO - this i didnt find in installation guide
Thanks,
Harish

HI,
here the items:
SAP Side:
- all machines have to be in the same domain
- BI has to trust the portal
- BI has to accept SSO tickets
- EP has to generate SSO tickets
BusinessObjects:
- SAP Authentication has to be configured
- BI system should be configured has default system in the options of the SAP authentication
- authentication.default parameter in the web.xml for InfoView has to be set to secSAPR3
- BusinessObjects has to be in the same domain
EP side:
- in the system landscape configure the Crystal Enterprise Server Properties for your BI system
- import the portal iview template that is part of the SAP Integration Kit
- create a new iView
Ingo

Procedure for sending captital goods to vendor with excise challan

Dear All,
Need your help on the following issue.
We are having an oven in the shop floor (Capital Goods) which we need to send out of the factory to vendor site against excise challan for some upgradation.
Can you suggest the procedure for the same in SAP ?
Thanks in advance.
Regards
Ratna

2 options
Equipment can be sent against:
u2022 4(5) excise challan: Components will be sent against 57F4 challan and material will be received in factory within 180 days from subcontractor.
u2022 Payment of duty: Outgoing excise invoice has to be prepared for components to be sent.
(RG23C-out) Value in outgoing excise invoice will be taken from latest incoming excise invoice value. System does not capture value automatically. User has to enter the value.
while return machine should be taken in against an Incoming GR
Hope this helps
Regards
Dheeraj

Suggested procedure for safe updating of Safari to v. 3.2

If your Safari keeps crashing, or if you are updating Safari (or just have):
N.B. Never delete Safari, never run it under Rosetta, don't use proxy settings.
(If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Safari 3.2 for download can be found here:
http://www.apple.com/safari/download/
Make sure you download the correct version for your system.
Also, observe the standard procedure for installing software: repair permissions and close all applications, install, then repair permissions again.)
Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta and which was updated to v.3.1.2, and now both Tiger and Leopard uses Safari 3.2. If Safari 3.2 is not the fastest browser you have ever used, then something is wrong!
(Trying to revert to a previous version of Safari can have repercussions, as Safari 3.x uses a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely, but if you really want to do this post back in a new thread for instructions on the safe way to do so.)
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-ons that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.2.
You should also ensure that you have downloaded and installed the correct version for your Mac of Security Updates up to 2008-007, which is required for Safari 3.2. Like all security updates, these require a restart and a permission repair. Note that 2008-007 is a combo update: if you have missed a couple of updates this one will suffice.
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• Hard Disk/Library/InputManagers
• Home/Library/InputManagers
especially prior to system updates and updates to Safari (they can always be added back one-by-one later).
Please do not respond to this post if you are having difficulties, or ask your questions in somebody else's thread, but start your own thread where your particular problem can get the full attention it deserves.

Bump.
Upgrading PithHelmet stopped my crashing.

Release procedure for PR

Hi,
I need to upgrade the existing release procedure for Purchase requistion.
I have created new release groups, release codes and strategies.
I have created new characteristics and have added that to the existing class which was being used.
Now i am not able to see the purchase requistions getting picked up for release, both the new release and the existing release are not working now.
I need my release at the header level and i am working on the release procedure with classification.
Let me know what is going wrong or do i have to any thing further.
Thanks,
Regards
Raghavendra

Hi Raghavendra,
IMG>MM>Purchasing>Purchase Requisition>Release Procedure>Procedure with classification>Check Release Strategies
Here all the nodes must be in green color then ur release strategies will be fine.
For more check the following link for Release Procedure.
http://www.sap123.com/showthread.php?t=59
Regards,
Nani.

6500 Upgrade Rommon procedure

Experienced a problem with a 6509 chassis that the recommendation was to upgrade the rommon level on the sup720s which have msfc3 and native IOS. I have a procedure that shows an upgrade of an individual supervisor and a procedure for upgrading an MSCF3 on a sup720. Both procedures show different code families. I will attach a "sh version" output. Are there a combination of codes that need to be deployed together? For example: a rommmon code for the supervisor, one for the MSFC3, and one for the DFC3. We also deploy redundant supervisors in the switch. Can someone recommend the proper software to upgrade with and the proper procedure for upgrading redundant supervisors? Can you do the upgrade on one supervisor and have it automatically synchronize the redundant supervisor, or do you upgrade each supervisor separately, one at a time?

I think you have upgrade each supervisor separately. But afgter upgradation, the new configuration changes made in Active Sup can be synchronised with Redundant sup using RPR or RPR+.

Procedure for creating transparent table, data element and domain

Hi,
Can anybody let me know the procedure for creating transparent table, data element and domain.
Thanks,
Mahathi

Hi
Database table and its components
A database table is the central data structure of the ABAP/4 data dictionary.
The structure of the objects of application development are mapped in tables on the underlying relational database.
The attributes of these objects correspond to fields of the table.
A table consists of columns (fields) and rows (entries). It has a name and different attributes, such as delivery class and maintenance authorization.
A field has a unique name and attributes; for example it can be a key field.
A table has one or more key fields, called the primary key.
The values of these key fields uniquely identify a table entry.
You must specify a reference table for fields containing a currency (data type CURR) or quantity (data type QUAN). It must contain a field (reference field) with the format for currency keys (data type CUKY) or the format for units (data type UNIT). The field is only assigned to the reference field at program runtime.
The basic objects for defining data in the ABAP Dictionary are tables, data elements and domains. The domain is used for the technical definition of a table field (for example field type and length) and the data element is used for the semantic definition (for example short description).
A domain describes the value range of a field. It is defined by its data type and length. The value range can be limited by specifying fixed values.
A data element describes the meaning of a domain in a certain business context. It contains primarily the field help (F1 documentation) and the field labels in the screen.
A field is not an independent object. It is table-dependent and can only be maintained within a table.
You can enter the data type and number of places directly for a field. No data element is required in this case. Instead the data type and number of places is defined by specifying a direct type.
The data type attributes of a data element can also be defined by specifying a built-in type, where the data type and number of places is entered directly.
Two Level Domain Example
A domain defines a field technically and therefore it may
be used at different business levels.
A data element describes the meaning of a domain in a certain business context.
A domain, however, is used for the technical definition of a table field (for example field type and length).
Therefore, although a take-off airport (data element S_FROMAIRP) would have a different business meaning from an airport where a plane lands (data element S_TOAIRP), they could still have the same domain(here S_AIRPID) because technically we could assign the same number of characters whether the airport is a take-off or a landing airport.
Definitions of Table in Database
In SAP R/3 tables are defined as
A) Transparent tables: All of the fields of a dictionary table correspond to a field in the real database table.
B) Pooled tables: Different tables which are not linked to each other with a common key are combined into a TABLE POOL. Several logical tables thus exist as a single real database table.
C) Cluster tables: Several tables linked by a common key may sometimes be combined by the data dictionary and made to exist on the database schema as a single table.
SAP is evolving R/3 tables in transparent tables.
Elaboration on each of the definitions
A transparent table is automatically created on the database when it is activated in the ABAP Dictionary. At this time the database-independent description of the table in the ABAP Dictionary is translated into the language of the database system used.
The database table has the same name as the table in the ABAP Dictionary. The fields also have the same name in both the database and the ABAP Dictionary. The data types in the ABAP Dictionary are converted to the corresponding data types of the database system.
The order of the fields in the ABAP Dictionary can differ from the order of the fields on the database. This permits you to insert new fields without having to convert the table. When a new field is added, the adjustment is made by changing the database catalog (ALTER TABLE). The new field is added to the database table, whatever the position of the new field in the ABAP Dictionary.
Tables can also reside on the database as Pooled tables or cluster tables
Pooled Tables: Different tables which are not linked to each other with a common key can be combined into a Table Pool. The tables contained within this pool are called Pooled Tables. A table pool is stored in the database a simple table. The table's data sets contain, in separate fields, the actual key for the data set to be stored, the name of the pooled table and the contents of the data set to be stored.
Using this schema, several logical tables are combined into a single real database table. Although the data structure of each set is lost during the write to the table pool, it is restored during the read by the ABAP/4 Data Dictionary. The ABAP/4 Data Dictionary utilizes its meta-data to accomplish this.
Since information must be prepared (defined) within the ABAP/4 Data Dictionary when it is read or written to (or accessed), this process itself defines these as not transparent tables
Cluster Tables: Occasionally, several tables may be linked by a common key. The ABAP/4 Data Dictionary can also combine these tables into a single table. Each data set of the real table within the database contains a key and in a single data field, several data sets of the subsequent table for this key.
As mentioned above, these table types require special data handling, therefore they are not transparent tables.
Technical Settings in Dictionary
The data class logically defines the physical area of the database (for ORACLE the table space) in which your table should be created. If you choose the data class correctly, the table will automatically be created in the appropriate area on the database when it is activated in the ABAP Dictionary.
The most important data classes are master data, transaction data, organizational data and system data.
Master data is data that is rarely modified. An example of master data is the data of an address file, for example the name, address and telephone number.
Transaction data is data that is frequently modified. An example is the material stock of a warehouse, which can change after each purchase order.
Organizational data is data that is defined during customizing when the system is installed and that is rarely modified thereafter. The country keys are an example.
System data is data that the R/3 System itself needs. The program sources are an example.
Further data classes, called customer data classes (USER, USER1), are provided for customers. These should be used for customer developments. Special storage areas must be allocated in the database.
The size category describes the expected storage requirements for the table on the database.
An initial extent is reserved when a table is created on the database. The size of the initial extent is identical for all size categories. If the table needs more space for data at a later time, extents are added. These additional extents have a fixed size that is determined by the size category specified in the ABAP Dictionary.
You can choose a size category from 0 to 4. A fixed extent size, which depends on the database system used, is assigned to each category.
Correctly assigning a size category therefore ensures that you do not create a large number of small extents. It also prevents storage space from being wasted when creating extents that are too large.
Modifications to the entries of a table can be recorded and stored using logging.
To activate logging, the corresponding field must be selected in the technical settings. Logging, however, only will take place if the R/3 System was started with a profile containing parameter 'rec/client'. Only selecting the flag in the ABAP Dictionary is not sufficient to trigger logging.
Parameter 'rec/client' can have the following settings:
rec/client = ALL All clients should be logged.
rec/client = 000[...] Only the specified clients should be logged.
rec/client = OFF Logging is not enabled on this system.
The data modifications are logged independently of the update. The logs can be displayed with the Transaction Table History (SCU3).
Logging creates a 'bottleneck' in the system:
Additional write access for each modification to tables being logged.
This can result in lock situations although the users are accessing different application tables!
Create transparent table
Go to transaction SE11. Enter name of table you want to create (beginning with Y or Z) and click on create pushbutton
Enter the delivery class and the table maintenance criteria
The delivery class controls the transport of table data when installing or upgrading, in a client copy and when transporting between customer systems .
The display/maintenance indicator specifies whether it is possible to display/maintain a table/view using the maintenance tools Data Browser (transaction SE16) and table view maintenance (transactions SM30 and SM31).
Enter the name of the table field and the data element. The
System automatically populates the technical details for
existing data elements.
So far as possible it is advisable to use existing data elements which befit the business requirements.
However, we may create data elements if need be. The same is shown in the next slide.
To create a data element simply double click on it.
Alternately create a data element by simply choosing the
data type radio button on SE11 initial screen.
Create data element
The system prompts you to create a new data element.
Choose the Yes pushbutton.
Under the data type tab enter the domain name which
determines the technical characteristics of the field.
Further characteristics tab: Allows you to specify a search help assigned to the data element.
It also allows you to specify a parameter id which helps you populate a field from SAP memory.
Field label: Can be assigned as prefixed text to a screen field referring to the ABAP Dictionary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
Create domain
If the domain does not exist in the data dictionary the
system prompts you to create one.
Give the technical characteristics under the definition
tab. Value range allows you value restriction at domain
level.
Value range tab:
As explained in the section Consistency through input checks one can restrict the possible values for a field at domain level itself by either entering fixed values or by specifying a value table under the tab Value range.
Currency/Quantity fields in a table
A currency or a quantity field must be assigned a reference field from a reference table containing applicable qty unit or currency unit.
Field of the reference table, containing the applicable quantity unit or currency
A field containing currency amounts (data type CURR) must be assigned a reference field including the currency key (data type CUKY).
A field containing quantity specifications (data type QUAN) must be assigned a reference field including the associated quantity unit (data type UNIT).
Create transparent table continue
Maintain the technical settings of the table by clicking on the tab

Need procedure for creation of BW Roles, Assigning Queries,Publishing Roles

Hi Experts,
Could you please let me know the procedure for creation of BW Roles, Assigning Queries,Publishing Roles in Business Explorer (BEx - BW 3.5)
Thanks in advance,
Andy

Hi,
Creating BW Roles
http://help.sap.com/saphelp_nw04/helpdata/en/52/6714b6439b11d1896f0000e8322d00/frameset.htm
Assigning Queries
After creating the query, save the query to a role from the query designer.
Publishing Roles in Business Explorer
https://websmp101.sap-ag.de/~sapdownload/011000358700002894802003E/HowToBIPortal1.pdf
Hope this helps you..!
-Pradnya

Procedure for Archive the data

Hello Experts,
I need to write a procedure for clean up the data base. Below is my rek.
User should be provided with options of entering the table name and also should be given option to select whether he wants to delete all the data or archive the table.
--> Program should provide the list of tables that are related to the table name that was given by the user. (This is not required if the table is stagging table, as they don't have constraints associated with them)
--> If user wants to archive then the data in the tables and its related table should be archived (exported) into a flat file and then delete the data from each table in a sequence. Else, we need to delete the data without archiving.
Can you Please let me know the procedure for the above rek and also I am not sure about the archiving the data. If you don't know the table name and the columns. so How can you define a cursor record to handle the record.
Can you please send me the complete code for the above rek to [email protected]
I appreciate help in this regard.
Thanks & Regards,
Sree.

Can you please send me the complete code for the
above rek to [email protected]
I appreciate help in this regard.The goal of this forum is not to make your job, but to assist you with guidelines, references, and concepts, on specific issues. If you want someone to code for you, then you should hire a programmer instead.
~ Madrid

I am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

i am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

Install more RAM in the computer; the Mac needs to have at least 2GB of RAM and should have 4GB or more first.
(125734)

Upgrade SW Procedures for 15454

Similar Messages

Maybe you are looking for