Upgrade to 10.4.10 from 10.3 everytime I try to add a printer I cant

I upgraded my Dual 1.8 GHz PowerPC G5 to 10.4.10 from 10.3 and I am not able to add any printers now. This is my computer at work so it is on a network. But not only will it not let me add my network printers I cannot add my USB printer either I keep getting this messgae: An error occured while trying to add sleceted printer. server-error-service-unavailable. Can anyone help me and tell me what I need to do to fix this. Thanks in advance
hamperdown

In your printer setup utility, you can select the Printer Setup Utility>Reset Printing System...
Try that, but it didn't work for me, I found that the latest security update has screwed a lot of peoples ability to print. You basically need to do an archive and reinstall to get rid of the update.

Similar Messages

  • HT2495 I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, but can't find the printer on the add printer and scan icon on preferences.

    I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
    Thanks,
    Ivette

    You would need to get the IP address of your printer then manually add a network print queue.
    To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address.

  • I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

    I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

    Hold down the option key and select
     ▹ System Information...
    from the menu bar. In the window that opens, select
    Hardware ▹ USB
    from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

  • I do have some problem with downloading an app from the store, when i try to add, a box appears and says  safari can not open the page because the address is invalid, i have no idea why this occurs, and any tip on how to get rid off the restriction code m

    i need some one to help me because i cant get ana app to download it says it will be downloaded when u login to your account but in already loged on

    You don't download apps from the iTunes app store with Safari.

  • TS2551 forced to upgrade to get on IPhoto & now an ! shows up everytime I try to view/email/print a photo!  How do I fix this?

    I had to upgrade to get on IPhoto and now an ! shows up each time I click on a photo to email/print.  How do I fix this problem?  Thank you

    What do you mean by "get on iPhoto"?  What was the exact message that you got?  It may have been a message to upgrade the library rather than the application.  The only time the app needs to be upgraded is when the library has been opened by a later version of the application.
    As for the ! it shows up when iPhoto has lost/broken the file path to the original files in the library. So apply the two fixes below in order as needed: 
    NOTE: since you gave no indication of the version of iPhoto or system you're using the following is based on iPhoto 9 (11) and Lion or later.
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I have an itunes card from December.  Everytime I try to redeem, it says contact itunes support. HELP!!

    Help!  I've tried to redeem on my iphone and also on itunes on PC.  PC itunes has a different id etc.  My daughters.

    You will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
    http://www.apple.com/emea/support/itunes/contact.html
    to contact the iTunes Store.
    Regards.

  • TS1717 itunes continually crashes when I try to add a song to ipod playlist from itunes library.

    Since I've updated to itunes 10 recently, itunes crashes everytime I try to add a song from my library into an ipod playlist. This has never happened before and seems to be related to the recent update. Please advise.

    Start by updating iTunes, you can download it from here -> http://www.apple.com/itunes/download/
    If that doesn't do it, try the suggestions in this Apple doc -> iTunes: Troubleshooting issues with third-party iTunes plug-ins

  • Hi, I have an iphone 3GS from HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out! When I checked my backup file in Outlook Express it was also wiped out!!! What can I do now?

    Hi, I have an iphone 3GS purchased in HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out. When I checked my backed up file in Outlook Express, it was also wiped out during the synchronization. I tried to restore from backup on iTunes but still, the contact was not there anymore. I have contacted your HK Apple Hotline and talked to a technical support called TIMMY LO, he said there is nothing to do with them and he refused to provide any support to recover my contact, he even said I should try to pay extra money to 3rd party supplier and see what they can do to my iphone, despite the fact that this could be caused by the pre-mature release of 4.3.3 when a bug still hasn't been fixed. I am very disappointed at Apple's service, especially considering that I have been a loyal customer of iphone / ipod touch in the past few years. I need an official reply from Apple on this! How can Apple be so irresponsible to their own firmware failure??

    Hi, I have an iphone 3GS purchased in HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out. When I checked my backed up file in Outlook Express, it was also wiped out during the synchronization. I tried to restore from backup on iTunes but still, the contact was not there anymore. I have contacted your HK Apple Hotline and talked to a technical support called TIMMY LO, he said there is nothing to do with them and he refused to provide any support to recover my contact, he even said I should try to pay extra money to 3rd party supplier and see what they can do to my iphone, despite the fact that this could be caused by the pre-mature release of 4.3.3 when a bug still hasn't been fixed. I am very disappointed at Apple's service, especially considering that I have been a loyal customer of iphone / ipod touch in the past few years. I need an official reply from Apple on this! How can Apple be so irresponsible to their own firmware failure??

  • I am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

    i am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

    Install more RAM in the computer; the Mac needs to have at least 2GB of RAM and should have 4GB or more first.
    (125734)

  • Cannot find backslash (\) on German keyboard anymore after upgrading to OS 10.6 from OS 10.5

    Cannot find backslash (\) on German keyboard anymore after upgrading to OS 10.6 from OS 10.5. It used to be at Alt-ß. Anyone can help please ?

    Never mind. Found it in an old post. It is mapped at Shift-Alt-7, really weird.
    The post is at:
    http://www.innoq.com/blog/st/2003/12/backslash_on_mac_os_x.html

  • Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

    Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
    Rp

    1. in physical connections part can i use the same work schema
    2. Can i use same contexts created or do i need to create everything as new and then try?
    Thanks,
    Rp.
    Hi,
    As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
    Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
    And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

  • I'm trying to import photos from my iphoto library, but keep getting a message saying I cant import from 7.1.5, that I need to upgrade to 7.1.5 or later.  But I have version 8.1.2.  I don't know what to do. I've been able to import in the past.

    I'm trying to import photos from my iphoto library, but keep getting a message saying I cant import from 7.1.5, that I need to upgrade to 7.1.5 or later.  But I have version 8.1.2.  I don't know what to do. I've been able to import in the past.

    Sounds like an issue with the iPhoto Library
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • While opening most of the website i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before. Kindly help.

    while opening most of the website on Safari i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before.
    HTTP Status 404 - /ssssportal.war/fup_gpon_1m_6g_512k.jspp
    type Status report
    message /ssssportal.war/fup_gpon_1m_6g_512k.jspp
    description The requested resource (/ssssportal.war/fup_gpon_1m_6g_512k.jspp) is not available.
    Kindly help. Also I am getting spinning ball most of the time. This was not with OS X Maverick 10.9.

    while opening most of the website on Safari i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before.
    HTTP Status 404 - /ssssportal.war/fup_gpon_1m_6g_512k.jspp
    type Status report
    message /ssssportal.war/fup_gpon_1m_6g_512k.jspp
    description The requested resource (/ssssportal.war/fup_gpon_1m_6g_512k.jspp) is not available.
    Kindly help. Also I am getting spinning ball most of the time. This was not with OS X Maverick 10.9.

  • Upgrading to LR 3.2 from 2.6 - Should I use the LR 3 box?

    As I intend to upgrade to Lightroom 3.2 from 2.6, I wonder if I should use the upgrade box or donload a trial version and insert the key to be found in that box.
    There was a thread lelated to migration from LR 1.4 to 2.2 ( http://forums.adobe.com/message/1394503#1394503 ) that strongly suggested passing over 2.0
    What is best?

    As I intend to upgrade to Lightroom 3.2 from 2.6, I wonder if I should use the upgrade box or donload a trial version and insert the key to be found in that box.
    It doesn't matter. The results are the same. Lightroom 3.2 is Lightroom 3.2 whether you download it or buy the box.
    There was a thread lelated to migration from LR 1.4 to 2.2 ( http://forums.adobe.com/message/1394503#1394503 ) that strongly suggested passing over 2.0
    What is best?
    I agree ... skip 2.0, although this seems irrelevant to your title and first paragraph.

  • Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

    Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

    To configure the browser to use Acrobat or Adobe Reader to open PDF files:
    1. Quit Internet Explorer(any other browser)
    2. Start Acrobat or Adobe Reader.
    3. Choose Edit > Preferences.
    4. Select Internet in the list on the left.
    5. Deselect(Uncheck) Display PDF in Browser, and click OK.
    6. Restart Internet Explorer

Maybe you are looking for