Upgrade to 10.6 server from 10.5.8 without erasing any Existing Settings?

Hi,
Please Help,
How do I upgrade my MAC Leopard 10.5.8 Server to MAC Snow Leopard 10.6 Server without erasing (deleting) any server settings (running services) and without erasing my existing workgroup manager (workgroup accounts).
Please help.
Thanks,
Gulab Pasha

Hi,
I have basically the same question, and wondered if anyone has any more details. I want to upgrade from 10.5.8 Server to 10.6.2 Server, but want to be sure that things won't break when I do!
I have lots of OD user accounts, blogs and wikis for groups and users, and users have done quite a lot of podcast recording. For PCP we're using quite a number of custom workflows, and at the moment users are doing dozens of recordings every week.
So before I go ahead and do anything too destructive, has anybody upgraded a similar setup? Do accounts, blogs, and the ability to podcast remain intact?
I back things up with Carbon Copy Cloner, so could potentially restore it all but I'd rather not have to (or at least wait until I have the luxury of a bit more time!)
thanks,
bob.

Similar Messages

Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears

Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears. The error further displays "
type: Exception report
message:
description: The server encountered an internal error that prevented it from fulfilling this request.
exception:
ServletException Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
root cause:
NoClassDefFoundError Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
note: The full stack trace of the root cause is available in the logs.
Has anyone experience this issue? Any solutions? Your assistance is greatly appreciated!

Hi Mesut,
you can refer the link for migration
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx/10xcucrug010.html
regds,
aman

A friend of mine put music on my ipod from her itunes account. now i cant put my music up there from my itunes account without erasing the other songs. how can i fix this ?

A friend of mine put music on my ipod from her itunes account. Now i can't put my music up there from my itunes account without erasing the other songs. How can i fix this?

"A friend of mine put music on my ipod from her itunes account. "
This is not legal. You have no legal right to that music.
" Now i can't put my music up there from my itunes account without erasing the other songs. "
That is correct.
How can i fix this?
There is nothing to fix. The ipod is designed to stop you from being able to steal music as you are doing.
Erase the music you got illegally and sync your own music to your own ipod.

Upgrading My Oracle App Server from 10.1.2 to 10.1.3 without uninstalling ?

Hi All,
Is their any way we can just upgrade the app server from 10.1.2 to 10.1.3 with uninstalling the older 10.1.2 and reinstalling 10.1.3 ?
Thanks
Raghavendra

No and yes. Please note that 10.1.2 is a full release and 10.1.3 is a Java only release, i.e. no Portal, Forms, Reports, Discoverer, Web Cache etc.
Please check out the document "Oracle Application Server Upgrade and Compatibility Guide" on the Documentation Disk for 10.1.3.
http://download-east.oracle.com/docs/cd/B25221_04/getstart.htm
Check chapter 1.2 "What Does It Mean to Upgrade to 10g Release 3 (10.1.3)?"
Regards,
Martin

Can't transfer files from iTunes to iPhone without erasing song library

I purchased some music from itunes on my computer at work(which is authorized on my account). I connected my iPhone to transfer (sync) the music to my iphone, but iTunes warns me that all music on my iphone will be erased. The music on my iPhone is currently sync'd with my home computer. My question is: How do I transfer music to my iPhone from two different authorized computers without erasing the content on the phone?

You can't sync music from two computers to the one iPhone.
You need to copy the files onto something like a USB stick and take them home and add them to your iTunes library at home.

Adding to ipod from alternative iTunes catalogue without erasing existing

Is it possible to add music to ipod without erasing existing content that was synced from another PC.
So far i have been alerted that if i sync any new material from my list it will automatically erase what my daughter already has on her ipod.

Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in the iTunes source list change the update setting to manual, that will let you use our iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button:
Using iPod with Multiple computers
Managing content manually on iPod
Syncing Music to iPod
You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows with iTunes 7.3 or later installed hold down the Shift + Ctrl keys together. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Once you are connected you can change to manual as above: iTunes - Keyboard Shortcuts for Windows
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod

Upgrading SQL Server from 2008 to 2012 doesn't respect existing install / instance paths

Basic Information : Running Microsoft Windows Server 2008 with MS SQL Server 2008 (version 10.0.5869), trying to upgrade to SQL Server 2012. Currently working in a cloned
VM of our production server (so I can try things and not worry about affecting our production system).
Current server setup:
C Drive: Operating System (About 7 GB of 50 GB free)
J Drive: Program Files (About 65 GB of 78 GB free)
F Drive: SQL Databases (About 120 GB of 195 GB free)
Issue: I am trying to do an upgrade of our existing MS SQL Server 2008 install. I am using the GUI method, and choosing "Upgrade from SQL Server, 2005, SQL Server
2008, or SQL Server 2008 R2" in the Setup GUI:
All the checks & rules run with no issues. When I get to the "Instance Configuration" screen in the setup GUI, it is not respecting where my SQL Server instance is already installed (which is on the J drive). Instead it wants to install EVERYTHING
(including Instance Directory, which should be on the F drive, and the install folder, which should be on the J drive) on the C drive under C:\Program Files\ and there is no option in the GUI to change that, as it's grayed out.
I tried using a Configuration File to do the upgrade, but when I tried to specify the specific paths, it says those variables are not allowed to be used in an upgrade. If I allow the install to go through, it seems to install fine, but only leaves me with about
1.5 GB free on the OS drive (Drive C) and all of SQL Server is now installed on Drive C, which is not what I want or need.
Looking in the Registry Editor, I can see that under HKLM\SOFTWARE\Microsoft\Microsoft
SQL Server\MSQL11.MSSQLSERVER\ that the SqlProgramDir key
has changed from "F:\" to "C:\Program Files\Microsoft SQL Server\" and that the SQLPath and SQLDataRoot have
changed from "F:\MSSQL10.MSSQLSERVER\MSSQL" to "C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL". SQLBinRoot has
also been changed "F:\MSSQL10.MSSQLSERVER\MSSQL\Binn" to "C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn".
It doesn't seem to want to follow where the existing Install and Instance Directories are. Am I missing something here? I've done a decent amount of research, but can't find anything that talks about this. So I'm at a loss as to what to do from here.

I haven't touched the registry. Here is the ConfigurationFile.ini from the original install (I've scrubbed sensitive info out of it) showing the paths:
;SQLSERVER2008 Configuration File
[SQLSERVER2008]
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books online, Business Intelligence Development Studio, and other shared components.
FEATURES=SQLENGINE,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK,OCS
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console.
INDICATEPROGRESS="False"
; Setup will not display any user interface.
QUIET="False"
; Setup will display progress only without any user interaction.
QUIETSIMPLE="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; Specify the root installation directory for native shared components.
INSTALLSHAREDDIR="J:\Program Files\Microsoft SQL Server"
; Specify the root installation directory for the WOW64 shared components.
INSTALLSHAREDWOWDIR="J:\Program Files (x86)\Microsoft SQL Server"
; Specify the installation directory.
INSTANCEDIR="F:"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting Services (RS).
INSTANCENAME="MSSQLSERVER"
; Agent account name
AGTSVCACCOUNT="NT AUTHORITY\SYSTEM"
; Auto-start service after installation.
AGTSVCSTARTUPTYPE="Automatic"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT AUTHORITY\SYSTEM"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT AUTHORITY\SYSTEM"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Latin1_General_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="F:\MSAS10.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="F:\MSAS10.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="F:\MSAS10.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="F:\MSAS10.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="F:\MSAS10.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS=""
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT AUTHORITY\SYSTEM"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS=""
; The default is Windows Authentication. Use "SQL" for Mixed Mode Authentication.
SECURITYMODE="SQL"
; Provision current user as a Database Engine system administrator for SQL Server 2008 Express.
ADDCURRENTUSERASSQLADMIN="False"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Disabled"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT AUTHORITY\SYSTEM"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Specifies which mode report server is installed in.
; Default value: “FilesOnly”
RSINSTALLMODE="DefaultNativeMode"

Upgraded to 10.5 server from 10.4 but Server Admin won't upgrade Apache 2

I am attempting to upgrade an Intel XServe from Mac OS X Server 10.4 to 10.5. Everything goes perfect with all services and setting restored. However, when I attempt to use the Apache upgrade option in Server Admin to switch to Apache 2, it fails with the error:
"The server reported the error: 'CANNOTTRANSLATEERR' while processing a command of type: 'setApacheMode'"
The server itself is a modest set-up. It is essentially a private web server running only ftp, http, mail, a firewall, and about 20 users. I am also hosting two of the domains on https with certs.
I figured this has something to do with translating the Apache 1.3 config files. I am working on development machine with a clone of the server so I have been trying everything I can think of or find on the net to cure this but have had no luck. I have searched several Mac-centric forums and have found nothing.
Any help or suggestions would be appreciated.

Yes, I did try 127.0.0.1 as well as the OS given domain ddeweb.local and even localhost. But no luck. In addition, I also tried various things with the config files in /etc/apache2 up to and including complete replacement of the entire /etc/apache2 directory with one from a clean 10.5 server install. That didn't even work.
The other thing I tried in an attempt to rule out the virtual host files was to disable all but the default host config which was refreshed with the default config. Still didn't work.
As for the output from in the terminal app:
Oddly enough the serveradmin command produced nothing. It just came back with the prompt.
The "sites" directory listing is below:
000069.7.39.117_443www.ddedesign.com.conf.saved-Pre-Leopard-unmodified
000069.7.39.117_443www.ddedesign.com.conf.saved-pre-Leopard
0000any_80.conf
0000any_80.conf.default
0000any_80.conf.saved-Pre-Leopard-unmodified
0001any_80ddedesign.com.conf
0001any_80ddedesign.com.conf.saved-Pre-Leopard-unmodified
0001any_80ddedesign.com.conf.saved-pre-Leopard
0002any_80rooseveltcc.org.conf
0002any_80rooseveltcc.org.conf.saved-Pre-Leopard-unmodified
0002any_80rooseveltcc.org.conf.saved-pre-Leopard
0003any_80konaqueen.net.conf
0003any_80konaqueen.net.conf.saved-Pre-Leopard-unmodified
0003any_80konaqueen.net.conf.saved-pre-Leopard
0004any_80kcpinternational.org.conf
0004any_80kcpinternational.org.conf.saved-Pre-Leopard-unmodified
0004any_80kcpinternational.org.conf.saved-pre-Leopard
000569.7.39.119_443www.kcpsecure.net.conf.saved-Pre-Leopard-unmodified
000569.7.39.119_443www.kcpsecure.net.conf.saved-pre-Leopard
0006any_80indrawschool.com.conf
0006any_80indrawschool.com.conf.saved-Pre-Leopard-unmodified
0006any_80indrawschool.com.conf.saved-pre-Leopard
0007any_80thewhatcomdream.org.conf
0007any_80thewhatcomdream.org.conf.saved-Pre-Leopard-unmodified
0007any_80thewhatcomdream.org.conf.saved-pre-Leopard
0008any_80zimgroup.com.conf
0008any_80zimgroup.com.conf.saved-Pre-Leopard-unmodified
0008any_80zimgroup.com.conf.saved-pre-Leopard
0009any_80bellinghamart.com.conf
0009any_80bellinghamart.com.conf.saved-Pre-Leopard-unmodified
0009any_80bellinghamart.com.conf.saved-pre-Leopard
0010any_80majahuapoint.com.conf
0010any_80majahuapoint.com.conf.saved-Pre-Leopard-unmodified
0010any_80majahuapoint.com.conf.saved-pre-Leopard
0011any_80edirol.com.conf
0011any_80edirol.com.conf.saved-Pre-Leopard-unmodified
0011any_80edirol.com.conf.saved-pre-Leopard
0012any_80rssamerica.com.conf
0012any_80rssamerica.com.conf.saved-Pre-Leopard-unmodified
0012any_80rssamerica.com.conf.saved-pre-Leopard
0013any_80rolandsystemsgroup.com.conf
0013any_80rolandsystemsgroup.com.conf.saved-Pre-Leopard-unmodified
0013any_80rolandsystemsgroup.com.conf.saved-pre-Leopard
0014any_80northernmeadowsestates.com.conf
0014any_80northernmeadowsestates.com.conf.saved-Pre-Leopard-unmodified
0014any_80northernmeadowsestates.com.conf.saved-pre-Leopard
0016any_80kitchendesignstudio.net.conf
0016any_80kitchendesignstudio.net.conf.saved-Pre-Leopard-unmodified
0016any_80kitchendesignstudio.net.conf.saved-pre-Leopard
0017any_80creeksidestudiolofts.com.conf
0017any_80creeksidestudiolofts.com.conf.saved-Pre-Leopard-unmodified
0017any_80creeksidestudiolofts.com.conf.saved-pre-Leopard
0018any_80sebastianbellingham.org.conf
0018any_80sebastianbellingham.org.conf.saved-Pre-Leopard-unmodified
0018any_80sebastianbellingham.org.conf.saved-pre-Leopard
virtualhostglobal.conf
virtualhostglobal.conf.default
virtualhostglobal.conf.save

Upgrading mac os X server from panther to leopard on xserve

Hi,
I've actually got a xserve G4 and one G5. Both running on MacOS X server 10.3.9.
I plan to upgrade to 10.5 because a lot of clients are now running on MacOS X 10.5.
I don't find informations on Internet on this situation, and how to do this upgrade correctly. (always about non-server version on macOS).
Can you advise me on that?
Should a migration intermediary to 10.4?
Is there something that I must think before ?
Do you know of sites that speak about this?
Thanks you,
Fabien

I would seriously consider installing 10.5 server fresh rather than trying to upgrade. You can try Passenger
http://www.apple.com/downloads/macosx/networking_security/passenger.html
to move users and passwords, but there are a lot of pitfalls you may encounter, and a clean install may actually be faster.

Can't upgrade to 10.6 server from 10.4 server.

It says "mac os x can't be isntalled on this computer." I'm wondering if that's because i'm using raid (mirrored)? The box meets all the specs necessary for installation. I would prefer not to do a clean install if i can help it. Or is there some other possible reason?
thanks,
ann

It wouldn't have anything to do with a RAID configuration.
But either way, I wouldn't recommend it. You are just asking for a lot of head-aches. Did one for a client over the summer and it was not worth it. A fresh install/build is always preferrable if you ask me.
If you really want to go for it, try installing 10.5 first then go to 10.6. Id imagine that is the hangup...

Would upgrading to new version 8 from version 7.7.1 erase all my music?

I want to upgrade to the new version (8), but am afraid that all my files and information (on 7.7.1) would be erased. Would that happen and would I have to create a whole new account or would I be able to stay with my current one? Answering this, would be greatly appreciated for someone that is not tech savvy! Thank you

There's no reason that updating the software should have any affect on your music or your account. I can only speak from my own experience and I've never had an issue updating. However, you should always have a backup of your music some where in case of computer problems in general. You might want to check out these pages for future reference:
How to back up your media in iTunes
Back up your iTunes library by copying to an external hard drive

Weblogic admin server is unable to start (without giving any error)

Hi,
We have a disaster recovery machine which is created from production machine by file replication (SAN disks are used). We are still trying to make the DR domain up. Our problem is, after starting the script
startAdmin.sh, java process stops after log line containing "Initializing self-tuning thread pool". There is no process left when i grep in unix env. The out log give no error (admin.log server log is not created yet).
The only i have is the out log.
Could anybody help on resolving this problem ? Thanks very much in advance !
Here is all the admin.out log :
JAVA Memory arguments: -Xms1024m -Xmx1024m -XXnoSystemGC -Xverbose:memory,gcreport,gcpause -Xverbosetimestamp -Xverboselog:servers/asb_admin/logs/asb_admin_gc.log
WLS Start Mode=Production
CLASSPATH=/global/commonproduct/asb_prod/lib/log4j-1.2.15.jar:/product/osb/osb_10.3/patch_wlw1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/product/osb/osb_10.3/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/product/osb/osb_10.3/patch_cie670/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/product/osb/osb_10.3/patch_alsb1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/product/osb/osb_10.3/jdk/lib/tools.jar:/product/osb/osb_10.3/wlserver_10.3/server/lib/weblogic_sp.jar:/product/osb/osb_10.3/wlserver_10.3/server/lib/weblogic.jar:/product/osb/osb_10.3/modules/features/weblogic.server.modules_10.3.0.0.jar:/product/osb/osb_10.3/wlserver_10.3/server/lib/webservices.jar:/product/osb/osb_10.3/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/product/osb/osb_10.3/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/product/osb/osb_10.3/wlserver_10.3/../modules/features/osb.server.modules_10.3.0.0.jar:/product/osb/osb_10.3/osb_10.3/lib/flow/sb-flow.jar:/product/osb/osb_10.3/wlserver_10.3/../modules/com.bea.core.jaxen_1.0.0.0_1-1-1.jar:/product/osb/osb_10.3/osb_10.3/lib/version.jar:/product/osb/osb_10.3/osb_10.3/lib/alsb.jar:/product/osb/osb_10.3/osb_10.3/3rdparty/lib/j2ssh-ant.jar:/product/osb/osb_10.3/osb_10.3/3rdparty/lib/j2ssh-common.jar:/product/osb/osb_10.3/osb_10.3/3rdparty/lib/j2ssh-core.jar:/product/osb/osb_10.3/osb_10.3/3rdparty/lib/j2ssh-dameon.jar:/product/osb/osb_10.3/osb_10.3/3rdparty/classes:/product/osb/osb_10.3/wlserver_10.3/../modules/com.bea.core.apache.commons.logging_1.1.0.jar:/product/osb/osb_10.3/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/product/osb/osb_10.3/wlserver_10.3/server/lib/xqrl.jar::
PATH=/product/osb/osb_10.3/wlserver_10.3/server/bin:/product/osb/osb_10.3/modules/org.apache.ant_1.6.5/bin:/product/osb/osb_10.3/jdk/jre/bin:/product/osb/osb_10.3/jdk/bin:/usr/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Oracle JRockit(R) (build R28.2.2-7-148152-1.6.0_29-20111221-2104-solaris-sparcv9, compiled mode)
Starting WLS with line:
/product/osb/osb_10.3/jdk/bin/java -jrockit -Xms1024m -Xmx1024m -XXnoSystemGC -Xverbose:memory,gcreport,gcpause -Xverbosetimestamp -Xverboselog:servers/asb_admin/logs/asb_admin_gc.log -da -Dplatform.home=/product/osb/osb_10.3/wlserver_10.3 -Dwls.home=/product/osb/osb_10.3/wlserver_10.3/server -Dweblogic.home=/product/osb/osb_10.3/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=/product/osb/osb_10.3/patch_wlw1030/profiles/default/sysext_manifest_classpath:/product/osb/osb_10.3/patch_wls1030/profiles/default/sysext_manifest_classpath:/product/osb/osb_10.3/patch_cie670/profiles/default/sysext_manifest_classpath:/product/osb/osb_10.3/patch_alsb1030/profiles/default/sysext_manifest_classpath -Dweblogic.Name=asb_admin -Djava.security.policy=/product/osb/osb_10.3/wlserver_10.3/server/lib/weblogic.policy weblogic.Server
<Dec 13, 2012 11:12:00 AM EET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/global/commonproduct/asb_prod/lib/log4j-1.2.15.jar>
<Dec 13, 2012 11:12:01 AM EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.2-7-148152-1.6.0_29-20111221-2104-solaris-sparcv9 from Oracle Corporation>
<Dec 13, 2012 11:12:01 AM EET> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 8422724, 8715553 Mon Aug 10 18:21:10 EDT 2009
WebLogic Server Temporary Patch for 8160383, CR368242 Sat Oct 10 00:30:19 CDT 2009
WebLogic Server Temporary Patch for bug8186281 Mon Sep 20 08:23:54 PDT 2010
WebLogic Server Temporary Patch for 9089055 Sun Jan 24 19:23:51 IST 2010
WebLogic Server Temporary Patch for CR364493, 8066979 Thu May 21 11:35:42 CDT 2009
WebLogic Server Temporary Patch for CR383039 Fri Dec 19 15:28:07 PST 2008
WebLogic Server Temporary Patch for 8638391 Mon Jul 27 14:49:39 PDT 2009
WebLogic Server Temporary Patch for CR381056 Mon Oct 06 10:48:50 EDT 2008
WebLogic Server Temporary Patch for CR374413, CR378680 Tue Sep 02 09:55:36 PDT 2008
WebLogic Server Temporary Patch for CR378102 Wed Sep 10 23:28:48 PDT 2008
WebLogic Server Temporary Patch for CR378741 Tue Sep 09 13:08:51 PDT 2008
WebLogic Server Temporary Patch for CR378781, CR380313 Fri Sep 19 13:34:16 PDT 2008
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<Dec 13, 2012 11:12:06 AM EET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 13, 2012 11:12:06 AM EET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>

Hi,
Try to set the following value under setDomainEnv.sh file.
JAVA_OPTIONS="${JAVA_OPTIONS} -Djava.security.egd=file:///dev/urandom"
this will solve your startup problem.
Regards,
Kal

Is there a way to sync to an ipad or iphone selected files from a secondary itunes without erasing everything on the mobile device.

Is there a way to sync jujst selected files to an ipad or iphone from an itunes program that is not the one that is primarily used for that specific remote device?
I sync my ipad to my desk top but also have a laptop that has some files that I want on my ipad but don't want to erase everything to get them on.

Not really. iOS devices were designed to sync to one iTunes account, not multiple accounts. Simply email what you want to your Desk Top and transfre them to your iTunes library on that computer. Or get a Dropbox account. You can download Dropbox on your iPad and have dropbox on your Desk Top and Laptop. You could access files, music, pictures, etc., you put in your Dropbox account from any device. You get 2GB free storage, but you can purchase additional storage if you need it.

Is there a way you can transfer all the music from an ipod touch without losing any of it?

I have the latest of the Ipod Touch. My computer had crash but I didn't backup any of the music to a disc but its backup on the ipod touch. I want to connect my touch to my new computer but I don't want to lose any music. Is there a way I can transfer all the music without losing it?

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Re sync from mac to pc without erasing library

shuffle 2nd generation originally synced to a mac, want to sync to windows, how do I do this without losing all the songs currently on it? No longer have access to the mac.

The iPod shuffle 2nd generation is only designed for use with one library and lacks the full manual setting that the larger iPods have to safely connect to a different one. However, if you don't have the songs from the shuffle on your new PC you can copy the songs from it if you are careful and once the library is recreated it will be safe to sync.
Retrieving songs from a shuffle is a bit different from retrieving songs from a regular iPod. When you connect to your computer you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, your reaction of course is to press "Cancel". As soon as you connect a shuffle and choose "Cancel" when you get the "linked to different library" message the iPod will disconnect. For a shuffle follow this process:
1). On your Windows desktop go to Edit>New folder and add a folder to receive the songs from your shuffle.
2). Download SharePod from this link: SharePod
3). Connect your shuffle to your computer. While connecting the iPod to the computer on Windows with iTunes installed hold down the Shift + Ctrl keys together. Your iPod will connect but iTunes won't open, the hardware icon should appear in your Windows system tray.
4). Open Sharepod, it should have picked up the presence of your iPod and show all the songs on it.
5). Highlight all your songs in the program window (click on the first song in the list and hold down the shift key, click on the last song and all the songs in between will be selected).
6). Click Copy to PC (the icon is in the top left corner) and choose the folder you created on the desktop or simply drag the songs from SharePod to the folder: SharePod - Copying tracks to your PC
7). When all the songs have transferred close SharePod
8). Disconnect your iPod by right clicking on the hardware icon in your system tray: Safely Disconnect IPod
9). Check the desktop folder and make sure all your songs are there.
10) Open iTunes and go to File>Add Folder to Library, navigate to the folder on your desktop and add the songs.
11). Connect your iPod. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc. Choose "Erase and Sync", iTunes will reload your shuffle with the songs you recovered and link the iPod to this new library

Upgrade to 10.6 server from 10.5.8 without erasing any Existing Settings?

Similar Messages

Maybe you are looking for