Upgrade to 10g
Current Version Oracle 9i (Solaris)
I want to migration to Oracle 10g(OS: Enterprise Linux)
My approach is to migrate Oracle 9i to 10g in Solaris and then Rman cross platofrm conversion and then to (Enterprise Linux)
Is this approach is correct ?
You can go for database conversion indeed - maybe one of the fastest and easiest way, but only if the endianess are same on both OS.
Nicolas.
Similar Messages
-
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]
Hi Deepak/Folks,
Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
SAP note 1862446 - Inventory
load failed... OPatch cannot load inventory for the given Oracle Home
and re-create the oracle inventory.
This has also not helped in anyway.
Is there a solution to this problem.
Following is the error that I am getting when I try to Install the patches
Getting pre-run patch inventory...
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory.
Refer to log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
when I open the log file specified here I get the following
more mopatch-2014_08_06-14-52-51.log
more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
Version: 2.1.15
Revision: 5.1.2.26
Command-line: /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
Oracle Home: /oracle/<SID>/11203
RDBMS version: 11.2.0.3.0
OPatch version:11.2.0.3.3
Clean-up: supported
PSUs: supported
Log file: $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
Patch base: .
Patch source: SAP11203P_1312-20009978.zip
Link script: ./link.mts<SID>ua.sh
Readmes: <none>
Strpd. Readmes:<none>
make utility: /usr/ccs/bin/make
unzip utility: /oracle/<SID>/11203/bin/unzip
User name: ora<SID>
Working dir: /oracle/stage
System: HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
Disk free: 11734549 KBytes on /oracle/<SID>
Disk required: 886496 KBytes on /oracle/<SID>
Getting pre-run patch inventory...
executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Interim Patch Installer version 11.2.0.3.3
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/<SID>/11203
Central Inventory : /oracle/<SID>/oraInventory
from : /oracle/<SID>/11203/oraInst.loc
OPatch version : 11.2.0.3.3
OUI version : 11.2.0.3.0
Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
List of Homes on this system:
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
Oracle Home dir. path does not exist in Central Inventory
Oracle Home is a symbolic link
Oracle Home inventory is corrupted
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
OPatch failed with error code 73
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory. Exiting.
I would appreciate if you folks can help me out on this
Thanks
APSFOLLOW UP QUESTION BRANCHED:
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR] -
Images after upgrade from 10g to 11g
We recently upgraded from 10g to 11g and all the images are broke in the dashboard.
Can anyone provide the steps needs to be done in order to fix the broken images?
Thanks.Put image files at
Drive:\Oracle\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
If required
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\.appmergegen_1291264099332\analytics.ear\ukjjdc\res\s_blafp\images
Call them using fmap
Syntax: fmap:images/imagename.imageformat
for e.g: fmap:images/geograph.jpg
Pls mark correct/helpful if helps -
After Upgrade OBI 10g to 11g:Odbc driver returned an error - SQLExecDirectW
Hi all,
for an OBI upgrade from 10g to 11g I used a RPD and Webcatalog based on a remote machine other than my local machine. Firstable I am making the tests on a Linux Virtual machine, which uses the Sample Lite version from Oracle.
I made the following steps:
1. I upgraded the RPD and Webcatalog. It worked without any errors.
2. I set the static variable BI_EE_HOME via Administration Tool to the path in the Linux machine.
--> Here I am not sure if the set path is correct. It begins with: \bi\ ...\instances\...\coreapplication_obis1 (... : I can't mention here the whole path name).
--> When the OBI Server is installed in Windows, the mentioned static variable points to something like 'C:\<install folder>\...\coreapplication_obis1'
--> Question: is the begin of my set path correct?. I set that pointing to the Linux OBI Server, because the OBI Server is installed on Linux.
Problem:
After login as the user in RPD: Administrator/<Password for my upgraded RPD> I can see the links in the Catalog and the Dashboards links. But I can not see any values, any Reports when going through the links.
For example when trying to see a Dashboard with date 12.02.2011it happens:
Odbc driver returned an error (SQLExecDirectW).
Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] general error.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43119] Query Failed:
[nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified
at OCI call OCIServerAttach.
[nQSError: 17014] Could not connect to Oracle database. (HY000)
SQL Issued: SELECT "Dimension_-_My Dimension"."MyDimension" saw_0 FROM "Accounting (ACC)" WHERE "Dimension_-_My Dimension"."MyDimension" LIKE 'J%' ORDER BY saw_0
I think its not retrieving the data from the remote database, because I don't have the data of the remote database in my local. I think the OBI Server still is pointing to the local virtual machine Oracle database.
Can anybody tell me what happens here and how can I solve this problem?.
I would appreciate any help....Hi gerardnico,
I've tried many things and did as in your articles, but I don't have success with that.
These are the things I did:
1. I searched for the file tnsnames.ora in my Linux virtual machine. I could find it in many paths:
/.../Oracle_BI1/network/admin/samples/tnsnames.ora
/.../oracle/xe/app/oracle/product/10.2.0/server/hs/admin/tnsnames.ora.sample
/.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/tnsnames.ora
/.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/samples/tnsnames.ora
/.../oracle/xe/app/oracle/product/10.2.0/server/network/admin/temp/tnsnames.ora
/.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin
in the last path I found the listener.ora as well.
2. I took the tnsnames.ora from the last path, because the ORACLE_HOME points to /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server
3. I edited the tnsnames.ora this way:
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host_of_the_remote_machine)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = database_name_of_the_remote_machine)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = database_SID_of_the_remote_machine)
(PRESENTATION = RO)
4. I made a backup of the tnsnames.ora in path /.../Oracle_BI1/network/admin/samples/tnsnames.ora
and copied the tnsnames.ora from /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin to the Oracle_BI1 path
5. I set the TNS_ADMIN to /.../usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin
6. I restarted the BI Server
No success in what I did. The error is still there.
7. I've tried also: sqlplus database_user_remote_machine/database_password_remote_machine@database_SID_remote_machine
I didn't get the connection:
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jun 16 04:36:10 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name: database_user_remote_machine
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
What am I doing wrong here?. I am still thinking that I need the import of the database.
Additional SID=Service-Name=Database-name in the remote machine. -
Requirement to upgrade OBIEE 10g on Windows to OBIEE 11g on Linux
Dear All,
I have a requirement to upgrade OBIEE 10g from current windows 2003 environment to OBIEE 11g Linux environment.
I went through forums and many threads on upgrade, everywhere they talk about Upgrade Assistant (UA). And oracle documentation says ,
+"Do not change from one platform or architecture to a different platform or architecture as part of the upgrade process.+
+For example, if the existing 10g system is running on a Windows 32-bit platform, do not install Oracle BI 11g on a Linux 64-bit platform and then run the Linux 64-bit Upgrade Assistant to upgrade the existing 10g system."+
But there would certainly be scenarios with other users the way I have. Then what is the way out to do this upgrade?
Can anyone give some advice on this. It is little urgent.
Thanking in advance.
Regards,
Deepika.Thats are huge change in platform. win32 to linux 64.
Yet what we upgrade is only
catalog and rpd.
this might involve some manual change if UA cannot complete successfully.
Its better to do a prototype before the actual upgrade as recommended by Oracle. This will show what can the possible issues and road blocks.
Edited by: user10615659 on May 23, 2013 11:22 AM
Edited by: user10615659 on May 23, 2013 12:26 PM -
Problem with Java Application after upgrade to 10g
after upgrading to 10g if I enable coloumn of varchar255 to load into memory of my middleware orm following error is thrown,
javax.servlet.jsp.JspException at jsp.viewsinglerecord.throwError(_viewsinglerecord.java:31) [SRC:/jsp/standardinclude.jsp:84] at jsp.viewsinglerecord._jspService(_viewsinglerecord.java:1185) [SRC:/jsp/displaymultiplerecords.jsp:461] at com.orionserver[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:356) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:230) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:257) at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069) at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482) at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:231) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:136) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
Any lights on this issue ?after upgrading to 10g if I enable coloumn of varchar255 to load into memory of my middleware orm following error is thrown,
javax.servlet.jsp.JspException at jsp.viewsinglerecord.throwError(_viewsinglerecord.java:31) [SRC:/jsp/standardinclude.jsp:84] at jsp.viewsinglerecord._jspService(_viewsinglerecord.java:1185) [SRC:/jsp/displaymultiplerecords.jsp:461] at com.orionserver[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:356) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:230) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:257) at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069) at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482) at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:231) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:136) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
Any lights on this issue ? -
Upgrade Oracle 10g 10.2.0.2 to 10.2.0.4
Hi,
Is there anybody there, who upgrades Oracle 10g 10.2.0.2 to 10.2.0.4.
May I know where did you download and how you did it as I check the SAP Note 1137346, there is before and after upgrade but nothing about the upgrade process and I can't file the upgrade file as well.
Thanks for the help
P.S.: Our OS is Windows 2003 and we are running NW2004s , EP7.Hello,
not sure exactly what do you want.
Is there anybody there, who upgrades Oracle 10g 10.2.0.2 to 10.2.0.4.
Yes, me, for example
May I know where did you download and how you did it.
SAP Service Marketplace
http://service.sap.com/oracle-download
-> Oracle 10.2.0.4 -> Database RDBMS -> Your OS
Note that still is not available for Itanium (MS Windows Itanium (64-bit))
The instructions to install any patch set can be found on the patch ser (README file)
you can also take a look at the note 839187 Oracle Database 10g: Patch set installation -
Hello!
System: solaris 9 sparc 64-bit
I'm about to install a new 10g home and create a dummy database on an existing database server running 9i (prod), and then upgrade the 10g db with EXP/IMP from 9i database, leaving the 9i database intact.
Reviewing the installation document on tahti.oracle.com for Solaris, i noticed that I'm missing an OS package, SUNWlibms and also PL/SQL native compilation (SUN ONE Studio 8 c and c++ 5.5 or gcc 3.4.2).
Would it be safe to just install these packages.. or could it affect the already running Oracle 9i installation?
Any comment, experience regarding this is most valued!
ThanksThe package SUNWlibms should not affect current installs.
You will only need Sun ONE Studio 8 (C and C++ 5.5) or gcc 3.4.2 if you plan to implement PL/SQL Native Compilation - if not, you can skip this requirement
HTH
Srini -
Our unit will soon be deploying IE7 to our machines. I'm looking for simple instructions to upgrade to 10g R2. We are currently on 10g R1 (9.0.4). I assume it will be a simple de-install of DevSuite R1 and re-install of DevSuite R2 (10.1.2.0.2). But is there also a patch I need to install? I also found a whitepaper to help in understanding how to use JRE w/ running forms in IE7 as I understand the JRE is recommended over JInitiator. Is that correct?
So to recap the steps:
1. de-intall DevSuite R1 (9.0.4)
2. Install DevSuite R2 (10.1.2.0.2)
3. Install a patch? (not sure on this part)
4. Install JRE - is this just on the client side or is there something necessary on the server?
Am I missing anything?
Thanks, philI have forms running on my test machine after installing the Forms and Reports Services standalone product. I also installed the DevSuite on a separate home. I am having trouble with the OPatch for installing patch 3 but I have been able to test the forms successfully. Though I need to set up the db connection. I get the ORA-12154 TNS error. I have the info in the tnsnames file but I assume I need to configure w/ the Net Configuration Assistant?
I also have this running w/ JRE instead of the JInitiator which seems to be working very well.
So if anyone can point me in the right direction for:
1. Setting up db connection to my forms
2. OPatch use for installing patches
3. info on webutil...do I need the webutil object and library as I did in the 10g 9.0.4 version?
thank you. -
SQL Query takes 7 hours after upgrade to 10g
the following query executes in under a minute in 9i, however once upgraded to 10g it takes 7 hours. The query is designed to select the data row with the max date value for the selected criteria (there are multiple rows that match the below criteria with different dates)
I have tested in a lower environment the setting of "_optimizer_cost_based_transformation"=off and this corrects the problem. I do not feel comfortable setting this parameter session or system wide to provide a solution
We are running Oracle 10gR2 on Solaris
select "INSTN_ID_N",
"MEAS_D",
"FEED_TYPE_C",
"FREQ_C",
"STAT_LVL_C",
"TS_D",
"IX_INSTN_ID_C",
"ENTI_TYPE_C",
"CNTXT_ID_C",
"CNTXT_C",
"IX_CNTXT_ID_C",
"VND_C",
"PRCS_C",
"USR_ID_C",
"STAT_C",
"OVRD_RSN_C",
"LD_DT_D",
"UPD_USR_C",
"UPD_TS_D",
"INS_USR_C",
"INS_TS_D",
"DEL_FLG_C"
from IDA.V_INSTANCE_STATUS M
where
TS_D =
select max (TS_D) from IDA.V_INSTANCE_STATUS
where
INSTN_ID_N = M.INSTN_ID_N AND
MEAS_D = M.MEAS_D AND
FEED_TYPE_C = M.FEED_TYPE_C AND
FREQ_C = M.FREQ_C AND
STAT_LVL_C = M.STAT_LVL_C AND
IX_INSTN_ID_C = M.IX_INSTN_ID_C
)user638113 wrote:
the following query executes in under a minute in 9i, however once upgraded to 10g it takes 7 hours. The query is designed to select the data row with the max date value for the selected criteria (there are multiple rows that match the below criteria with different dates)
I have tested in a lower environment the setting of "_optimizer_cost_based_transformation"=off and this corrects the problem. I do not feel comfortable setting this parameter session or system wide to provide a solutionIf you're sure that the "lower" environment reproduces the same issue, and not due to some other differences (different statistics, parameters etc.), then you could share the two different execution plans generated via DBMS_XPLAN.DISPLAY having the cost based transformations turned on and off. Make sure you use the \ tags before and after the plan output to format it in fixed font. You can use the "Quote" button in the message editor to see how to use the tag.
Furthermore a optimizer trace (10053) might reveal why the cost based transformations lead to such an result.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/ -
Hi All,
How to Upgrade OracleAS 10g Forms from 10.1.2.3.0 to 10.1.2.3.1 in R12.1.2?
Platform Linux and DB version 10.2.0.4.
Thanks & Regards,
Tharun10.1.2.3.0 is the latest certified patchset with EBS R12
Upgrading OracleAS 10g Forms and Reports in Oracle E-Business Suite Release 12 (Doc ID 437878.1)
https://blogs.oracle.com/stevenChan/entry/forms_reports_10123_bundle_ebs
Thanks,
Hussein -
Needs to upgrade to 10g from 8i
Hi Gurus
Please help me upgrading to oracle 10g from 8i. Actually i got 8i ocp in 2001, Since then i was working on Oracle Ebusiness Suite 11i and did not get chance to upgrade to 10g. I request all the gurus to put some light on, how to upgrade? Where are the dumps? etc.
ThanksHello,
The only guru I can remember is guru josh. Anyway you can visit the following link;
Certification Upgrades
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=44
I think you will find the required information. Good Luck!
Adith -
Hi guys,
We are going to start our oracle upgrade from 9.2.0.2 to 10G release 2 on AIX and R/3 4.5b.
Has anyone recently upgraded to 10G here and any tips on what may come up? Any tips would be appreciated.
Thanks
CyrusG'Day Cyrus,
4.6C on AIX 5.2, in last 2 weeks we upgraded from Oracle 817 -> 9.2 -> 10.2 on a trial system, so we can upgrade to ECC6.0
The only issues we had were with the ability of OUI and especially DBUA (new in the Ora 10 upgrade) to work through Reflection X for WIndows. If you have some other X-Windows product you should be fine.
We got it to run with fully patched 9.2.0.7 Oracle client.
We HAVE got stuck though, due to an issue with SAPup with this delivery mySAP2005 SR1 upgrade kit, Unix on Oracle. The prepare falls over in phase PRPAR (I think that's the name of the phase). It is where it is trying to run tp. This occurs either on 9.2 or 10.2. Note that Prepare can be run on 9.2 according to the notes.
Error symptom: if you cd into /usr/sap/put/exe and run R3trans -d it inexplicably can't see the dboraslib.o, with a 'DLENOACCESS' error but no explanation in trans.log
Have tried various combinations, inc. copying in the 46D_EXT kernel versions into /usr/sap/put/exe which work fine. Then patched the programs from SAP kernel 64-bit patches, same same.
Did you try the Prepare yet? If not you might want to try it NOW to see if you get error. Please post reply with yr answer. Until this is resolved we have our upgrade ON HOLD, so it might affect yr planning....
Thanks Cyrus,
Patrick Melling. -
How to upgrade the 10g Dataguard after the primary was upgraded to 11g
Hi
What is the best procedure to follow to upgrade my 10g physical Dataguard after the 10g primary was upgraded to 11g ?
I was planning on stopping archiving of hte primary prior to the upgrade and enable after.
Do I need to reastablish my Dataguard from scratch ??
Old verison : 10.2.0.4
New version : 11.2.0.1
Thanks in advance
OrnaOrna Weisman wrote:
Hi
What is the best procedure to follow to upgrade my 10g physical Dataguard after the 10g primary was upgraded to 11g ?
I was planning on stopping archiving of hte primary prior to the upgrade and enable after.
Do I need to reastablish my Dataguard from scratch ??
Old verison : 10.2.0.4
New version : 11.2.0.1Hope this helps :
http://www.oracle.com/technology/deploy/availability/htdocs/DataGuardOverview.html
http://www.oracle.com/technology/deploy/availability/maa/maa_wp_11g_upgrades_made_easy.pdf
http://www.oracle.com/technology/deploy/availability/pdf/maa_wp_11g_transientlogicalrollingupgrade.pdf
http://www.oracle.com/technology/deploy/availability/pdf/maa_wp_10gr2_rollingupgradebestpractices.pdf
Regards
Rajesh -
Hello all,
Whether i need to check the BI system before going for Oracle upgrade to 10g. As we have taken sys copy from BIP to BI test server. Now we are planning to upgrade oracle 9i to 10 g. Please suggest.
amitAs part of a project implementation you shoudl have test scripts developed by your implementation team
They are not generic and shoudl be in your documentation handed over.
I cant give you a link because they are sitting on my server and apply to my project
If you havent got any test scripts then you will have to generate them from scratch - and these can be used for all other upgrades - and yes they cost a fortune in man hours to write
Examples are:
Listcube
Open Hub
SPRO tables
Multiprovider checks
Aggregate update
Process Chains
Transport Checks
Foreign Character check
Role Access
Creating queries
Creating variants
Superuser checks
Variable checks
RSRV checks
Run under Citrix
SQL checks
etc
Edited by: Simon Turnbull on Dec 30, 2008 1:25 PM -
Select after upgrade 9i - 10g runs slowly thousand times - urgent
I have select which runs around one second on Oracle 9. After upgrade to 10g this select runs more than two hours. I compute statistics on all tables, all columns and all indexes. This select consist from two parts - every part run on oracle 10g around 0.5 second but together more than 2 hours. When I rewrite it using WITH clausule, it runs 2 second. But I don't want to rewrite selects .. I want to find why it runs slow on 10g.
Below are original and rewrited select with their execution plans.
Any idea or recomendation?
Select:
SELECT * FROM (
SELECT DISTINCT from_fix_ident ident, from_ident_icao icao
, latitude1 latitude, longitude1 longitude, from_fix_fea_pk src
, -1 mslink
FROM l_sky_airway, l_dgn_airway
WHERE l_sky_airway.mslink=l_dgn_airway.mslink
UNION ALL
SELECT DISTINCT to_fix_ident ident, to_ident_icao icao
, latitude2 latitude, longitude2 longitude, to_fix_fea_pk src
, -2 mslink
FROM l_sky_airway, l_dgn_airway
WHERE l_sky_airway.mslink=l_dgn_airway.mslink
UNION ALL
SELECT ident, icao, latitude, longitude, 5 src, mslink FROM l_sky_navaid
UNION ALL
SELECT ident, icao, latitude, longitude, 6 src, mslink FROM l_sky_waypoint)
WHERE ident||';'||icao||';'||src IN (
SELECT ident||';'||icao||';'||src FROM (
SELECT from_fix_ident ident
, from_ident_icao icao
, latitude1 latitude
, longitude1 longitude
, from_fix_fea_pk src
FROM l_sky_airway, l_dgn_airway
WHERE l_sky_airway.mslink = l_dgn_airway.mslink
UNION ALL
SELECT to_fix_ident ident
, to_ident_icao icao
, latitude2 latitude
, longitude2 longitude
, to_fix_fea_pk src
FROM l_sky_airway, l_dgn_airway
WHERE l_sky_airway.mslink = l_dgn_airway.mslink
MINUS
SELECT ident
, icao
, latitude
, longitude
, 5 src
FROM l_sky_navaid
MINUS
SELECT ident
, icao
, latitude
, longitude
, 6 src
FROM l_sky_waypoint
ORDER BY ident, icao, src, mslink, latitude, longitude;Execution plan:
Plan
SELECT STATEMENT ALL_ROWSCost: 2 003 Bytes: 1 572 402 240 Cardinality: 24 568 785
29 SORT ORDER BY Cost: 2 003 Bytes: 1 572 402 240 Cardinality: 24 568 785
28 FILTER
12 VIEW EUS. Cost: 825 Bytes: 3 522 880 Cardinality: 55 045
11 UNION-ALL
4 HASH UNIQUE Cost: 398 Bytes: 981 948 Cardinality: 22 317
3 HASH JOIN Cost: 142 Bytes: 981 948 Cardinality: 22 317
1 TABLE ACCESS FULL TABLE EUS.L_SKY_AIRWAY Cost: 85 Bytes: 290 121 Cardinality: 22 317
2 TABLE ACCESS FULL TABLE EUS.L_DGN_AIRWAY Cost: 56 Bytes: 691 827 Cardinality: 22 317
8 HASH UNIQUE Cost: 398 Bytes: 981 948 Cardinality: 22 317
7 HASH JOIN Cost: 143 Bytes: 981 948 Cardinality: 22 317
5 TABLE ACCESS FULL TABLE EUS.L_SKY_AIRWAY Cost: 85 Bytes: 290 121 Cardinality: 22 317
6 TABLE ACCESS FULL TABLE EUS.L_DGN_AIRWAY Cost: 56 Bytes: 691 827 Cardinality: 22 317
9 TABLE ACCESS FULL TABLE EUS.L_SKY_NAVAID Cost: 6 Bytes: 57 225 Cardinality: 1 635
10 TABLE ACCESS FULL TABLE EUS.L_SKY_WAYPOINT Cost: 22 Bytes: 324 712 Cardinality: 8 776
27 VIEW EUS. Cost: 325 Bytes: 12 042 Cardinality: 446
26 MINUS
23 MINUS
20 SORT UNIQUE Cost: 325 Bytes: 23 128 Cardinality: 446
19 UNION-ALL
15 HASH JOIN Cost: 145 Bytes: 9 812 Cardinality: 223
13 TABLE ACCESS FULL TABLE EUS.L_SKY_AIRWAY Cost: 89 Bytes: 2 899 Cardinality: 223
14 TABLE ACCESS FULL TABLE EUS.L_DGN_AIRWAY Cost: 56 Bytes: 691 827 Cardinality: 22 317
18 HASH JOIN Cost: 146 Bytes: 9 812 Cardinality: 223
16 TABLE ACCESS FULL TABLE EUS.L_SKY_AIRWAY Cost: 89 Bytes: 2 899 Cardinality: 223
17 TABLE ACCESS FULL TABLE EUS.L_DGN_AIRWAY Cost: 56 Bytes: 691 827 Cardinality: 22 317
22 SORT UNIQUE Bytes: 512 Cardinality: 16
21 TABLE ACCESS FULL TABLE EUS.L_SKY_NAVAID Cost: 6 Bytes: 512 Cardinality: 16
25 SORT UNIQUE Bytes: 2 992 Cardinality: 88
24 TABLE ACCESS FULL TABLE EUS.L_SKY_WAYPOINT Cost: 24 Bytes: 2 992 Cardinality: 88 Rewrited select which run fast:
WITH inselect AS
(SELECT ident || ';' || icao || ';' || src
FROM (SELECT from_fix_ident ident, from_ident_icao icao,
latitude1 latitude, longitude1 longitude,
from_fix_fea_pk src
FROM l_sky_airway, l_dgn_airway
WHERE l_sky_airway.mslink = l_dgn_airway.mslink
UNION ALL
SELECT to_fix_ident ident, to_ident_icao icao,
latitude2 latitude, longitude2 longitude,
to_fix_fea_pk src
FROM l_sky_airway, l_dgn_airway
WHERE l_sky_airway.mslink = l_dgn_airway.mslink
MINUS
SELECT ident, icao, latitude, longitude, 5 src
FROM l_sky_navaid
MINUS
SELECT ident, icao, latitude, longitude, 6 src
FROM l_sky_waypoint)),
mainselect AS
(SELECT DISTINCT from_fix_ident ident, from_ident_icao icao,
latitude1 latitude, longitude1 longitude,
from_fix_fea_pk src, -1 mslink
FROM l_sky_airway, l_dgn_airway
WHERE l_sky_airway.mslink = l_dgn_airway.mslink
UNION ALL
SELECT DISTINCT to_fix_ident ident, to_ident_icao icao,
latitude2 latitude, longitude2 longitude,
to_fix_fea_pk src, -2 mslink
FROM l_sky_airway, l_dgn_airway
WHERE l_sky_airway.mslink = l_dgn_airway.mslink
UNION ALL
SELECT ident, icao, latitude, longitude, 5 src, mslink
FROM l_sky_navaid
UNION ALL
SELECT ident, icao, latitude, longitude, 6 src, mslink
FROM l_sky_waypoint)
SELECT *
FROM mainselect
WHERE ident || ';' || icao || ';' || src IN (SELECT *
FROM inselect)
ORDER BY ident, icao, src, mslink, latitude, longitude;
Plan
SELECT STATEMENT ALL_ROWSCost: 550 336 Bytes: 2 383 172 145 Cardinality: 24 568 785
31 SORT ORDER BY Cost: 550 336 Bytes: 2 383 172 145 Cardinality: 24 568 785
30 HASH JOIN Cost: 2 647 Bytes: 2 383 172 145 Cardinality: 24 568 785
17 VIEW VIEW SYS.VW_NSO_1 Cost: 1 173 Bytes: 1 472 922 Cardinality: 44 634
16 HASH UNIQUE Cost: 1 173 Bytes: 1 205 118 Cardinality: 44 634
15 VIEW EUS. Cost: 828 Bytes: 1 205 118 Cardinality: 44 634
14 MINUS
11 MINUS
8 SORT UNIQUE Cost: 828 Bytes: 2 314 600 Cardinality: 44 634
7 UNION-ALL
3 HASH JOIN Cost: 142 Bytes: 981 948 Cardinality: 22 317
1 TABLE ACCESS FULL TABLE EUS.L_SKY_AIRWAY Cost: 85 Bytes: 290 121 Cardinality: 22 317
2 TABLE ACCESS FULL TABLE EUS.L_DGN_AIRWAY Cost: 56 Bytes: 691 827 Cardinality: 22 317
6 HASH JOIN Cost: 143 Bytes: 981 948 Cardinality: 22 317
4 TABLE ACCESS FULL TABLE EUS.L_SKY_AIRWAY Cost: 85 Bytes: 290 121 Cardinality: 22 317
5 TABLE ACCESS FULL TABLE EUS.L_DGN_AIRWAY Cost: 56 Bytes: 691 827 Cardinality: 22 317
10 SORT UNIQUE Bytes: 52 320 Cardinality: 1 635
9 TABLE ACCESS FULL TABLE EUS.L_SKY_NAVAID Cost: 6 Bytes: 52 320 Cardinality: 1 635
13 SORT UNIQUE Bytes: 298 384 Cardinality: 8 776
12 TABLE ACCESS FULL TABLE EUS.L_SKY_WAYPOINT Cost: 22 Bytes: 298 384 Cardinality: 8 776
29 VIEW EUS. Cost: 825 Bytes: 3 522 880 Cardinality: 55 045
28 UNION-ALL
21 HASH UNIQUE Cost: 398 Bytes: 981 948 Cardinality: 22 317
20 HASH JOIN Cost: 142 Bytes: 981 948 Cardinality: 22 317
18 TABLE ACCESS FULL TABLE EUS.L_SKY_AIRWAY Cost: 85 Bytes: 290 121 Cardinality: 22 317
19 TABLE ACCESS FULL TABLE EUS.L_DGN_AIRWAY Cost: 56 Bytes: 691 827 Cardinality: 22 317
25 HASH UNIQUE Cost: 398 Bytes: 981 948 Cardinality: 22 317
24 HASH JOIN Cost: 143 Bytes: 981 948 Cardinality: 22 317
22 TABLE ACCESS FULL TABLE EUS.L_SKY_AIRWAY Cost: 85 Bytes: 290 121 Cardinality: 22 317
23 TABLE ACCESS FULL TABLE EUS.L_DGN_AIRWAY Cost: 56 Bytes: 691 827 Cardinality: 22 317
26 TABLE ACCESS FULL TABLE EUS.L_SKY_NAVAID Cost: 6 Bytes: 57 225 Cardinality: 1 635
27 TABLE ACCESS FULL TABLE EUS.L_SKY_WAYPOINT Cost: 22 Bytes: 324 712 Cardinality: 8 776 Reformated
Message was edited by:
Vlada
Message was edited by:
VladaVlada,
could you please post an properly formatted explain plan output using DBMS_XPLAN.DISPLAY including the "Predicate Information" section below the plan to provide more details regarding your statement. Please use the \[code\] and \[code\] tags to enhance readability of the output provided:
In SQL*Plus:
SET LINESIZE 130
EXPLAIN PLAN FOR <your statement>;
SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);In order to get a better understanding where your statement spends the time you might want to turn on SQL trace as described here:
[When your query takes too long|http://forums.oracle.com/forums/thread.jspa?threadID=501834]
and post the "tkprof" output here, too.
Could you also provide the information which version of 10g you're currently using? (4-digit version number). Note that 10g introduced a couple of significant changes including CPU costing enabled by default and a different default setting of DBMS_STATS regarding column histograms.
So you might want to re-gather the statistics using the method_opt parameter of the DBMS_STATS.GATHER__STATS procedures explicitly defined as "FOR ALL COLUMNS SIZE 1" to mimic the 9i behaviour.
You also might want to try the "OPTIMIZER_FEATURES_ENABLE" session setting set to "9.2.0" in order to find out if any of the new optimizer features could be causing the issue if re-gathering the statistics as suggested above doesn't make a difference.
Do you know if the tables/indexes in your 9i database also had reasonable statistics?
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle:
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/
Edited by: Randolf Geist on Sep 8, 2008 9:32 AM
Added some specific suggestions
Maybe you are looking for
-
Ni usrp example are not running on window 7 64 bit
i have installed labview 2012 ,modulation toolkit, mathscript toolkit and usrp device driver 1.2. i am using window 7 64 bit operating system. i am trying to run example of usrp but it was not running it is not able to load NI-MAPro.lvlib files .any
-
OBIEE 11.1.6 Installation failing at Create Domain
Hi, I am installing OBIEE 11.1.6 in Wndows 7 64bit machine. I have installed all pre requisites as below : Loopback Adapter JDK 1.6.34 -in path C:\Java\Jre and set the same in Environment Variables for Path have all memory required for installation T
-
Apple Wireless Mouse and Keyboard lose connection running games in Vista
I installed Windows Vista Ultimate for playing games on my iMac. During games the *wireless Apple keyboard and wireless Might Mouse seem to loose connection at random intervals.* Looks like the bluetooth connection is lost (?, this is a guess). After
-
What new MacbookPros will support dual booting Lion and Snow Leopard?
I was looking at http://www.macmall.com/n/macNavLinks-305?q=8899071 I need a system that can dual boot so that we can use older software that isn't supported by Lion.
-
Restore Session bug - fails after history is cleared
This has happened occasionally in the past, but after the latest Firefox update it's happening almost every time. When I close the browser, I like to clear the history first. Also, before I clear the history, I open a new blank tab and close the old