Upgrade to 11.1.1.6 and Jdeveloper issues
Dear all
I completed the migration of my SOA environment to 11.1.1.6, including upgrade of WLS, upgrade of SOA infrastructure and schema upgrade with PSA. The environment seems to be working fine.
The issue is that, when I try to install Jdeveloper 11.1.16, it reports that my SOA installation is still at 11.1.14 level, and I can't continue,
Any help will be appreciated.
Thanks
Hi Arturo
I replied to your same question posted in different forums under Weblogic Server. JDeveloper and WLS+SOA should and must be in different middleware homes. Same folders may work but it overwrites some JARs. And in future you cannot upgrade this type of installation. We ran into this issue 2 yrs back with 11.3 having all in one single folder, and we were not able to upgrade it.
Best is, to have totally different folders as I mentioned in your other forum.
WLS/SOA upgrade to 11.1.1.6 and JDeveloper issues
Thanks
Ravi Jegga
Similar Messages
-
WLS/SOA upgrade to 11.1.1.6 and JDeveloper issues
Dear all
I completed the migration of my SOA environment to 11.1.1.6, including upgrade of WLS, upgrade of SOA infrastructure and schema upgrade with PSA. The environment seems to be working fine.
The issue is that, when I try to install Jdeveloper 11.1.16, it reports that my SOA installation is still at 11.1.14 level, and I can't continue,
Any help will be appreciated.
ThanksHi Arturo
1. It is very important to install SOA Software and JDeveloper in totally different Middleware Homes (means different folders).
2. Looks like you already upgraded your WLS + SOA to 11.6 and ofcourse RCU Database also.
3. When you download and install JDeveloper 11.6, in first screen, by default it will select above middleware home and will ask you, if this is where you want to install JDeveloper. Make sure you do NOT select this location where you have WLS + SOA. Instead select like create new middleware home and say on Windows give a path like C:\Oracle\Middleware\JDeveloper116 and this folder will have JDeveloper. Usually for WLS + SOA, I install to a folder like C:\Oracle\MiddlewareSOA115 etc.
If you install both in same middleware home, some jars gets overwritten and you run into wierd issues.
When you install JDeveloper, it should NOT even look for any SOA Software or version etc. JDeveloper is just the IDE. Install JDeveloper. From Help menu, you install 2 extensions for soa and bpm. Thats it.
I hope ORACLE documentation clearly states that the middleware homes should be different for JDev and WLS or atleast this is Recommended or Supported. If it already does, pardon me.
Thanks
Ravi Jegga -
I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work
Hi Timia,
If you are using Safari as a web browser :-
Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
If you are using Google Chrome as the web browser :-
Open Google Chrome.
In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
In the "Search" section, select Google from the drop-down menu.
Let me know if you still experience any issue.
Regards,
Aadesh -
I downloded upgrade of itunes on my computer and now it dosn't work at all. i dowloaded from the web site, but still will not work. can anyone help.
Put it in DFU mode and restore it. (google for instructions on entering DFU mode).
-
I just recently upgraded to Firefox 5.0.1 and now the "lock" icon doesn't appear anywhere (I can find) when accessing secure websites. I haven't seen it once. It used to appear in the lower right corner of the screen. I also have Norton Internet Security.
Padlock is no longer part of Firefox; it was removed beginning in Firefox 4. The padlock shows that there is a secure connection but does not supply additional information. You could have made a typographical error and still have been connected to a secure connection. The padlock was replaced in Firefox 3 with the Site Identity Button. Familiarize yourself with the Site Identity Button at the left end of the Location Bar:
*https://www.mozilla.com/en-US/firefox/security/identity/
*https://support.mozilla.com/en-US/kb/Site+Identity+Button
*http://www.dria.org/wordpress/archives/2008/05/06/635/
You can install this add-on if you wish: *https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games.
Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.
-
i can't use indesign since upgrade, it keeps asking me to upgrade java which I have done and still wont open please help me i have a deadline
DL the SE 6 JRE from http://support.apple.com/kb/DL1572.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
ChrisMichael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David -
I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?
Hi,
PSC 1315 no longer supported for scanning since Mac OS X v10.5 or while using any newer OS, there is no scan software provided by either HP or Apple (Image Capture)
You may find this information stated below for Leopard, the same apply for any newer OS version:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en &os=219&product=374568&sw_lang=
Image capture will not recognize your device as well, only print is supported as you may find listed for teh PSC 1310 Series below:
http://support.apple.com/kb/HT3669#HP
Although there is no official scanning support for your device you may still try the 3rd party VueScan software which list your scanner as supported and compatible with Mountain Lion:
http://www.hamrick.com/vuescan/hp_psc_1310.html
Shlomi -
Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files.
Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files. Says "the Following disk images couldn't be opened". and then say's there "isn't enough disk space" I'm pretty sure it has something to do with apps that are not approved by the app store. How can I turn it off?
Select your hard drive in the Finder and choose File -> Get Info. What is the available space?
-
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
-
When I try to open iTunes app on iPhone 5, it starts to open then closes straight away, I upgraded to iOS 7.0.2 and it has been like this since I upgraded!
I also had this problem. Go to settings> itunes & app store, tap on your apple ID and sign out. Then open itunes store. It should now open.
Then sign back in again and the problem should be resolved -
I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions?I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions? -
I recently upgraded to iOS 7.0.3 and now my iPhone 4S will only sync purchased music to my phone from iTunes. Help! I have TONS of music that I have bought and burned to my computer, but cannot listen to it on my iPhone. This seems ridiculous!
Also, it's taking FOREVER (over an hour) to sync my iPhone to iTunes...
-
I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks. How do I proceed to get these programs back?
Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.
Maybe you are looking for
-
HCM Processes and Forms - Confirmation Text Formatting
Hi All, I am attempting to use the Confirmation Txt in the Scenario Steps of a form. When the editor comes up, there are not options for formatting available. According to the help system, the text editor provides you with XML formatting options as b
-
I seriously have uninstalled and reinstalled a dozen times and it still says I do not have Jave when I try to play games but it shows that my Java is enabled in the Safari preferences
-
Recording audio ONLY from a DVD into iTunes
Hi, I'm new to macs having just got an iMac G5. So far I love it and it's loads better than any windows based system I've had. I'm wondering if it is possible to record the audio only from some music DVD's I have into iTunes...can anyone help or is t
-
How to increase font size in contact list
Please help!! How can I increase the font of my Contact List...my mother has difficulty seeing the names....the font is tooo small...please help.
-
How do i start my Lenovo Thinkpad T440p?
When I turn it on it starts off by showing "lenovo" like it usually does. After a minute under the lenovo name it says "preparing automatic repair" and begins loading (This doesnt usually happen) After another minute it says "Diagnosing your PC" and