Upgrade to 11.1.1.7.1 from 6.8 on a Simple Install

Hi All,
This is my configuration
Host Machine = Windows Server 2008 64 Bit
OBIEE = OBIEE 11.1.1.6.8 - SIMPLE INSTALL ONLY
We have a simple install of OBIEE, so there is no managed server and no clustering. We want to upgrade to 11.1.1.7.1. I read it from ritttman's blog that "in place" upgrade on simple install in not possible? If somebody has done it by manually doing some changes, can you please share the link with me? Also, if it is possible this way, is it worth doing it considering all the manual changes / errors we face while doing. Is it recommended?
Also, If I go about doing a fresh installation of OBIEE 7.1 on the same host machine (in a separate middleware home folder) which already have weblogic running and OBIEE version 6.8 running, will that work? Can I install 7.1 on the same physical machine which already have 6.8 runining with simple install?
I'll really appreciate any help/pointers on this, Please let me know.
Thanks,
Ronny

Hi Ronny,
If I go about doing a fresh installation of OBIEE 7.1 on the same host machine (in a separate middleware home folder) which already have weblogic running and OBIEE version 6.8 running, will that work?
11.1.1.7.1 recommends weblogic 10.3.6 where as 11.1.1.6.8 is on 10.3.5
check the Prerequisites section
OBIEE, Endeca and ODI: OBI Apps 11.1.1.7.1 Installation & configuration- Part 1
or
Cookbook: Installing and Configuring Oracle BI Applications 11.1.1.7.1
Thanks,
Saichand

Similar Messages

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" ext

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" extension
i even already download a link
http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
Im afraid to erase it and not being able to get it back...
What can i do!??
Thanks in advance for this kind answer!!!

fsolution wrote:
Problem: this mac is not reading an excell file after upgrading to yosemite...   Now it once i donwload the zip it appears with an ".ods" extension...
If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice.

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

After lollypop upgrade I can no longer transfer files from LG g3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

After lollypop upgrade I can no longer transfer files from LGg3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

That is definitely odd, grantcool. Let's help restore this important data transfer feature. To confirm, when you connect the USB cable to your phone and computer > Pull down the Notification Bar > Select USB Connected > Can you choose Media Sync (MTP) ?
NicandroN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Upgrading to Leopard from Tiger. Should I clean install, or is archiving ok

I have the capability to backup up everything myself and clean install, but my only issue is...
I'm running a couple of programs that could be...might be....cracked versions. And I'm also running my own copy of the CS3 Adobe Master Collection, which is a huge part of my work. I REALLY do not want to reinstall all these programs. Can these be backed up and copied over?
I was going to just upgrade, but a friend of mine told me of LOADS of problems people have been having with doing that, so I need some advice on what way to do this.
Also, I heard that if I'm going to run bootcamp, which i plan to, i have to setup it up as early as possible after I upgrade for some reason. is this true?
-Chris

My recommendation is to Erase and Install. It assures the lowest potential for problems. You can do an Archive and Install provided you take some precautions:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, 4.1 for Leopard) and/or TechTool Pro (4.5.2 for Tiger, 4.6.2 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
Note that there is always the potential problem that some of your software may not be compatible with Leopard. I would check first because it's always a pain to have to go back. If I were you I would clone your current system to an external drive so if there are any problems you can simply boot from your clone and restore it.
It's best to set up the Boot Camp partition on a drive that hasn't developed some fragmentation if the Windows partition is going to require a large chunk of the drive. However, Boot Camp will let you know if it isn't able to create the partition size you've requested, so it should not be a problem to create the partition on the drive.
People will tell you lots of stories, but most do not understand the particulars of the individual situations. All they hear is "it didn't work" and whatever other horror story goes with it. Upgrade Installs and Archive and Installs can work and do work perfectly well provided that they are done right. Most users don't do it right. If it works they're just lucky.
So here's the short story:
1. Repair your hard drive and permissions.
2. Clone your current system to an external Firewire drive.
3. Test that the clone will boot your computer.
4. Determine that your software is compatible. If not upgrade it or replace it.
5. Decide which installation option you will use - Erase and Install, Archive and Install, Upgrade Install.
6. Do the installation.
In my opinion do not install a new operating system if your mission critical software is not compatible.

Steps to upgrade to 10.1.3.4.1 from 10.1.3.4.0 in Linux...

Hi,
Can you please suggest the steps to follow to upgrade to 10.1.3.4.1 from 10.1.3.4.0 in Linux...
Thanks in advance.

when u try to install it will give u a option to upgrade or install when you click the upgrade it will guide you

Pages tells me I need to upgrade to 5.0 to open documents from iCloud. When I go to the mac app store it says pages 5.0 is installed, but Pages says it's running 4.3. I just want to open documents on my mac that were created on my iPad.

Pages tells me I need to upgrade to 5.0 to open documents from iCloud, but the mac app store says its already installed and won't let me upgrade. when I check the version of pages I am running it says 4.3. I just want to be able to open documents on my mac that were created on my iPad. How can i get Pages 5.0?

Welcome to Apple Support Communities
You already have got Pages 5.0, but you still have got Pages 4.3, so Pages 4.3 is being opened instead of the newest version, being this the reason why you get a message telling you to update Pages to the most recent version.
If you don't need the old version, open a Finder window, choose Applications in the sidebar and delete the old Pages icon or move it to an external drive. I don't recommend you to do this, as users are complaining about the lack of features of the new version.
Instead, what you can do is to put the new Pages icon in the Dock by dragging it from the Finder window to the Dock, so you can open the new Pages version from the Dock and you can open all your documents with it after opening the application

How do I upgrade elements 10 to open raw files from my Canon 70d?

How do I upgrade elements 10 to open raw files from my canon 70d?

Normally, if there are any updates for your version of PSE then they should be offered to you automatically. However, you can also check if there are any new updates by going to:
Help >> Updates
If your camera is relatively new then even by getting the updates you may not be able to edit raw files from the new camera because old versions of PSE are normally not updated as soon as the new version hits the market. We are currently at version 13 so version 10 was stopped long time ago. However, you can see a workaround at this link where I posted a video to get things moving:
<Why can't I open my RAW files from my Nikon D7000 ?? I can open RAW files from my old Nikon D70's but not my D7000...>
Hope this helps.

I have seen so much response about the Mountain Lion update slowing down computers. I am updating from Mac OS x 10.6.8. What can I do to ensure the upgrade will go fine? Do I unplug my external hard drive before installing, or keep it plugged in?

I have seen so much response about the Mountain Lion update slowing down computers. I am updating from Mac OS x 10.6.8. What can I do to ensure the upgrade will go fine? Do I unplug my external hard drive before installing, or keep it plugged in?
Also, I have the 08 version of iWork. Will this cause problems for the update? Can I update this AFTER I update the processor?

Welcome to Apple Support Communities
There's no reason to think that Mountain Lion will slow down your Mac. Just make a backup of your data before upgrading with Time Machine > http://support.apple.com/kb/HT1427
Also, check that your apps are compatible > http://www.roaringapps.com Upgrade them to a compatible version or delete them before upgrading.
The external drive won't make the OS X Mountain Lion installer fail, but it's better to unplug it during the upgrade.
iWork '08 is compatible with Mountain Lion. iWork '09 includes OS X Mountain Lion features and can be purchased at the Mac App Store.
To upgrade to OS X Mountain Lion, I recommend at least 4 GB of RAM. You can check how much memory you have in Apple menu > About this Mac

I have Mac os x with 10.4.11 and i want to upgrade, what is the next operating software from a 10.4.11 for a g4

I have Mac os x with 10.4.11 and i want to upgrade, what is the next operating software from a 10.4.11 for a g4 and can it be done on a g4

If you have a processor of 867 MHz or faster and a minimum of 512 MB of RAM, you can run OS X Leopard, updated to 10.5.8.
That's as far as a G4 can go.
Check eBay for discs:
http://www.ebay.com/sch/i.html?_nkw=Mac+OS+X+10.5+Leopard+Retail&_sacat=0&_odkw= Mac+OS+X+10.5+Leopard+Full+Retail&_osacat=0
No Snow Leopard, 10.6x or Lion, 10.7x.
they won't run in a PPC Mac.

Itunes lib show app, but won't install to iPhone I upgraded fro iphone4 to iphone5. i restored from backup in iCloud, and almost everything is there perfectly. there was one app on the phone, which i clicked on to finish the install, but it then disappear

I upgraded fro iphone4 to iphone5. i restored from backup in iCloud, and almost everything is there perfectly. there was one app on the phone, which i clicked on to finish the install, but it then disappeared. in my iTunes, under library/apps, this app still shows there. how do i reinstall this app. it was a paid app, and i searched the app store, and apparently it is no longer there.
any help would be greatly appreciated.

It appears to be fixed, he had multiple versions of iTunes installed (since he put his iTunes in a different folder) the iTunes icon launched the old iTunes, even though the new was installed. it's working now.

I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?

I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?
Thanks

CME is part of the IOS, so you can't upgrade the IOS seperately from CME.
That said, if this is a production environment you should proceed with caution and be prepared to roll back as you may find bugs, etc.
You should also look at release notes and make sure your phone firmware will still work or needs to be upgraded too.
Brandon

Upgrading to CS6 Design and Web Premium from CS4 Design Premium Install Failure

I am trying to upgrade to CS6 Design and Web Premium from CS4 Design Premium on Win 7 (32bit). I am nistalling from the DVD which was purchased from the Adobe Store. The box says it is for Upgrading from 4 or 3x. I am entering the CS6 serial number and it is able to validate it. When it goes into the Preparing to Install mode the status bar never changes and after what seems like a very long time the Installation failed message is displayed. I ran the Adobe Support advisor and followed the link to the page that tells you how to resolve the issues and chose to go into the registry and look for "In Progess". There was no "In Progress". I have the serial numbers for CS4 and CS6 so they should be valid given that both were purchased through the Adobe Store. I am very frustrated!!!!!!!!!
Installation Status:
Installation failed:
Adobe Advisor Results:
Regestry:

I downloaded and installed the Application manager and re-started the installation. This time it got to installiing the applications and after 3 hours it was only 55% completed and showing that it was installing Acrobat and had 2 hours to go. It seemed to be stuck so I cancelled the install.

HT1414 My daughter tried to upgrade her ipad, received as a gift from last year, with ios 7 last Saturday a.m.; since then she couldn't turn it on. I tried to follow your steps to recover it but wouldn't work(&don't have recovery disc). What do I do now?

My daughter tried to upgrade her ipad, received as a gift from last year, with ios 7 last Saturday a.m.; since then she couldn't turn it on. I tried to follow your steps to recover it but wouldn't work(& I don't have recovery disc available). What do I do now?

Try using another computer. I had the same problem, repeated the given solution many times and each time it failed. Then I connected ipad to another computer and it worked immediately. Then I used the first computer to restore a backup.

Lost calendar data after upgrade to OS X 10.10.3 from 10.10.2

Using MacBook Pro 13 inch Mid 2009, Processor: 2.26 GHz Intel Core 2 Duo, Memory: 8 GB 1067 MHz DD3; Graphics: NVIDIA GeForce 9400M 256 MB
Upgraded to OS X 10.10.3 from OS X 10.10.2 and lost all data appointments, etc in Calendar.
Tried retrieving calendar from Time Machine, but unable to recover as part running system.
What do I do to retrieve data? All my medical appointments are on this calendar.
Please help.

I found that is a hardware problem, because the 9600MGT didn't shown when I reinstall OS X Lion 10.7.4.
It seems that I have to buy a new one

Upgrade to 11.1.1.7.1 from 6.8 on a Simple Install

Similar Messages

Maybe you are looking for